Loading ...
Sorry, an error occurred while loading the content.

1098Re: Edelbrock intake question

Expand Messages
  • mroskothen
    Apr 1, 2004
    • 0 Attachment
      I just used the edelbrock choke kit for my 2115 intake, the big hole
      in the back is for the brake, there was one more hole on the rear
      back side that I just plugged.
      I didn't want to make the electric choke fit since my choke lever on
      the carb is rivited on.

      --- In
      Cadillac_Performance_Association@yahoogroups.com, "GregTalbott"
      <cadillacsgalore@y...> wrote:
      > Go with an electric choke. I have the same on my '75 500ci. The
      > in rear of carb is for your PCV so hook it up accordingly. As for
      > any other emissions your car is old enough to qualify for special
      > registration and emission exception in most states.
      > The only problem I had with my setup is the original air cleaner
      > will be too tall and interferes with hood.
      > Greg
      > --- In Cadillac_Performance_Association@yahoogroups.com, "Tommy
      > Pierson" <tompierson@s...> wrote:
      > > I have an edelbrock 2115 intake & a rebuilt Q-jet for my '74
      > Caddy.
      > > The carb was rebuilt to factory specs, & I purchased it with the
      > > intentions of normal use, but now that I have the intake, I may
      > have
      > > a few problems.
      > > First, the choke looks like it needs to be replaced, or altered
      > > fit the new manifold. Not a problem with the Edelbrock choke &
      > > kit, according to the instructions.
      > > Second, there are emissions fittings on the oem intake, that do
      > not
      > > appear on the edelbrock. Can I just plug the hole in the back of
      > the
      > > carb?
      > > I spent about $125.00 on the rebuilt carb from a guy on e-bay, so
      > > returning it will be difficult at best. Would I have been better
      > off
      > > with the Edelbrock version of the Q-jet?
      > > Any responses will be greatly appreciated, Tom
    • Show all 4 messages in this topic