Loading ...
Sorry, an error occurred while loading the content.

1068Re: Help

Expand Messages
  • William Lucke
    Feb 29, 2004
    • 0 Attachment
      The 4.5 and 4.9 have the transverse bolt pattern and won't bolt to the
      longitudinal transmission.


      Will



      > From: "cadillac19852003" <cadillac19852003@...>
      >Subject: Re: Help
      >
      >What engine would bolt right up to the tranny i have in there now
      >(its an 85 Eldo, so its regularly mounted... and ive got plenty of
      >room under the hood!) Could i just directly bolt a 368 to it? And
      >what about just turning a 4.9 or 4.5 regular way... what would that
      >do? Mainly going after the 368 question here...
      >Sid Walker
      >85 Eldorado
      >--- In Cadillac_Performance_Association@yahoogroups.com, "Joe
      >Foerster" <joefoerster@y...> wrote:
      > > The swap I've seen used the Cad trans. Of course, switching to a
      >THM-425 would be better but it is a *huge* undertaking.
      > >
      > > Joe Foerster
      > > North Hollywood, CA
      > > http://www.bobnjoe.com/interest/Cad/cad.htm
      > >
      > >
      > > ----- Original Message -----
      > > From: brunsdal
      > > To: Cadillac_Performance_Association@yahoogroups.com
      > > Sent: Sunday, February 22, 2004 9:12 AM
      > > Subject: Re: [Cadillac_Performance_Association] Re: Help
      > >
      > >
      > > Dear Joe: I have seen a swap on a 82 to a 403 Olds, do you think
      >the tranny will have a problem, I am planning the same swap and
      >could use the Olds tranny also? Thanks Dale
      > >
      > > ____________________
      > > Dale and Ethel Brunsdale
      > > 250-233-8866
      > > brunsdale@y...
      > > ----- Original Message -----
      > > From: Joe Foerster
      > > To: Cadillac_Performance_Association@yahoogroups.com
      > > Sent: Sunday, February 22, 2004 8:31 AM
      > > Subject: Re: [Cadillac_Performance_Association] Re: Help
      > >
      > >
      > > The trans won't handle a 500 or a 472.
      > >
      > > Joe Foerster
      > > North Hollywood, CA
      > > http://www.bobnjoe.com/interest/Cad/cad.htm
      > >
      > >
      > > ----- Original Message -----
      > > From: "William Lucke" <wlucke@s...>
      > > Sent: Sunday, February 22, 2004 6:49 AM
      > >
      > >
      > > Is it longitudinal or transverse?
      > > If it's a sidewinder, you can install a 4.5 or 4.9 in its place.
      > > If it's longitudinal, you can do what has been suggested and
      >install a 368
      > > (or a 500 if you so desire)
      > >
      > >
      > > Will
      > >
      > >
      > >
      > > > From: "cadillac19852003" <cadillac19852003@y...>
      > > >Subject: Help
      > > >
      > > >Does anyone know anything that I can do to my 4100 to make it
      >have a
      > > >little more punch, or anything! Thanks guys
      > > >
      > > >PS Its in an 85 Eldo. Perfect car except for the stupid motor!
      > >
      > >
      > > Yahoo! Groups Sponsor
      > > ADVERTISEMENT
      > >
      > >
      > >
      > >
      > >
      > > --------------------------------------------------------------------
      >--------
      > > Yahoo! Groups Links
      > >
      > > a.. To visit your group on the web, go to:
      > >
      >http://groups.yahoo.com/group/Cadillac_Performance_Association/
      > >
      > > b.. To unsubscribe from this group, send an email to:
      > > Cadillac_Performance_Association-unsubscribe@yahoogroups.com
      > >
      > > c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms
      >of Service.
      >
      >
      >
      >________________________________________________________________________
      >________________________________________________________________________
      >
      >
      >
      >------------------------------------------------------------------------
      >Yahoo! Groups Links
      >
      >
      >
      >
      >------------------------------------------------------------------------
    • Show all 14 messages in this topic