Re: New 5 axis build...
- Awesomes, What software can generate G-code and support for 5 axis
--- In CNC_Toolkit@yahoogroups.com, "rlwoodjr11" <rlwoodjr11@...> wrote:
> Looks great. I hope to build a 5 axis one of these days. Please update us with pictures.
> --- In CNC_Toolkit@yahoogroups.com, "Barry" <slaymetender@> wrote:
> > Hello folks, I just joined, but I'd like to share what I've been making over the past year. I've been working on my own 5 axis gantry router. I did build the electronics for a 6th rotary table, but I want to make sure everything else is epic before adding that. Anyway, here's a couple links to renders of my build.
> > The final plates are currently at the waterjet cutter, and I'll be able to do the final build in two weeks. I'm so excited.
> > I think you'll see that my design is very similar to the maker of CNC_Toolkit. Thanks for the inspiration;)
> > http://www.3dmation.com/images/ru_cnc/milla_model_complete1.jpg
> > http://www.3dmation.com/images/ru_cnc/milla_model_complete2.jpg
> > http://www.3dmation.com/images/ru_cnc/milla_model_complete3.jpg
> > Barry
- it's in the files section;
--- In CNC_Toolkit@yahoogroups.com, "SamakthachaiP" <mongkolnum@...> wrote:
> Awesomes, What software can generate G-code and support for 5 axis
- Yeah, I fully expect to use CNC_Toolkit to generate the G-Code for the machine. The software I'm using to control the machine is Mach3, which can be bought from the Rainnea folks too.
Btw, here's new picts of the machine. It's nearly finished...
I've added homing sensors for the B/C drive head since these pictures. Now it's jsut calibrating, then cutting. It's about damn time;)
--- In CNC_Toolkit@yahoogroups.com, "rainnea" <yahoo@...> wrote:
> it's in the files section;
> --- In CNC_Toolkit@yahoogroups.com, "SamakthachaiP" <mongkolnum@> wrote:
> > Awesomes, What software can generate G-code and support for 5 axis
> > machine?
> > Ton