Loading ...
Sorry, an error occurred while loading the content.

Re: Fw: [BaylinerBuccaneerGroup] Batten Question for 240

Expand Messages
  • Andres Espino
    THAT SailRite stuff looks Amazing!  Also they will send long pieces coiled but warn you against injury because when released they open like a steel spring
    Message 1 of 16 , Mar 20, 2013
    • 0 Attachment
      THAT SailRite stuff looks Amazing!  Also they will send long pieces coiled but warn you against injury because when released they open like a steel spring with great force.  This does mena no oversize shipping charges tho!

      http://www.sailrite.com/Batten-Pultruded-Material-1-5-8

      Back up a page to select other sizes.

      With this stuff I only need to trace my pocket and make each one to fit.. sand and smooth the edges.

      Thanks Again!

      Andrew

      From: PhilC <PandD_Collins@...>
      To: BaylinerBuccaneerGroup@yahoogroups.com
      Sent: Wednesday, March 20, 2013 5:07 PM
      Subject: Re: Fw: [BaylinerBuccaneerGroup] Batten Question for 240

       
      Interesting.
      Did you buy the boat new?
      The reason I ask, is I have never seen bamboo (or wood of any type)battens. (Well, at least, not since the 1950s..) The sails provided with even the oldest Buccs would have been fiberglass.

      But I have used bamboo rods for a -temporary- batten, works quite well if you can find one the right size/stiffness.

      Sailrite has batten material by the foot in all the popular sizes.

      --- In BaylinerBuccaneerGroup@yahoogroups.com, Jbc <c670cj@...> wrote:
      >
      > All four were originally bamboo material (wooden)...I still have all originals, and in perfect shape.
      >  
      > Going to the boat this weekend and will measure and take pictures if you'd like.
      >  
      > Jack
      > 'Viajera' (The Time Capsule)
      >
      > ----- Forwarded Message -----
      > From: Andres Espino <ima_very_cool_cowboy@...>
      > To: "BaylinerBuccaneerGroup@yahoogroups.comBaylinerBuccaneerGroup@yahoogroups.com>
      > Sent: Wednesday, March 20, 2013 11:38 AM
      > Subject: [BaylinerBuccaneerGroup] Batten Question for 240
      >
      >  
      >
      > Hello Folks,
      >
      > Question for 240 owners!
      >
      >
      > In going over my sails I see most of my Mainsail battens are missing!  All but 1 actually, and I see no size on it.  The mauinsail takes 4 battens.. anyone know what sizes they are and the numbers of them?
      >
      > Thanks,
      >
      > Andrew
      >



    • Jbc
      Andres:   I will assume then that you will not need anything further from me on the batten issue, n est pas?   JBC ________________________________ From: Jbc
      Message 2 of 16 , Mar 21, 2013
      • 0 Attachment
        Andres:
         
        I will assume then that you will not need anything further from me on the batten issue, n'est pas?
         
        JBC

        From: Jbc <c670cj@...>
        To: Andres Espino <ima_very_cool_cowboy@...>; "BaylinerBuccaneerGroup@yahoogroups.com" <BaylinerBuccaneerGroup@yahoogroups.com>
        Sent: Wednesday, March 20, 2013 12:41 PM
        Subject: Fw: [BaylinerBuccaneerGroup] Batten Question for 240
        All four were originally bamboo material (wooden)...I still have all originals, and in perfect shape.
         
        Going to the boat this weekend and will measure and take pictures if you'd like.
         
        Jack
        'Viajera' (The Time Capsule)

        ----- Forwarded Message -----
        From: Andres Espino <ima_very_cool_cowboy@...>
        To: "BaylinerBuccaneerGroup@yahoogroups.com" <BaylinerBuccaneerGroup@yahoogroups.com>
        Sent: Wednesday, March 20, 2013 11:38 AM
        Subject: [BaylinerBuccaneerGroup] Batten Question for 240
         
        Hello Folks,

        Question for 240 owners!

        In going over my sails I see most of my Mainsail battens are missing!  All but 1 actually, and I see no size on it.  The mauinsail takes 4 battens.. anyone know what sizes they are and the numbers of them?

        Thanks,

        Andrew
      • PhilC
        If you add up all the measurements, you can order one long piece. They coil it up and put it in a box. When you cut them, tape them at the cut, then cut
        Message 3 of 16 , Mar 21, 2013
        • 0 Attachment
          If you add up all the measurements, you can order one long piece. They coil it up and put it in a box.

          When you cut them, tape them at the cut, then cut through the tape.
          After sanding the ends smooth, if you have some fiberglass resin, you can seal the ends with it. You can do it with super glue also. No need if you have batten end caps.

          BUT - Shipping for short battens isn't a big deal - it's when you have a full battened sail and the battens are more than 8' long (I have a couple with 9' battens!) - the shipping then gets expensive real fast!



          --- In BaylinerBuccaneerGroup@yahoogroups.com, Andres Espino <ima_very_cool_cowboy@...> wrote:
          >
          > THAT SailRite stuff looks Amazing!  Also they will send long pieces coiled but warn you against injury because when released they open like a steel spring with great force.  This does mena no oversize shipping charges tho!
          >
          > http://www.sailrite.com/Batten-Pultruded-Material-1-5-8
          >
          >
          > Back up a page to select other sizes.
          >
          > With this stuff I only need to trace my pocket and make each one to fit.. sand and smooth the edges.
          >
          > Thanks Again!
          >
          > Andrew
          >
          >
          > ________________________________
          > From: PhilC <PandD_Collins@...>
          > To: BaylinerBuccaneerGroup@yahoogroups.com
          > Sent: Wednesday, March 20, 2013 5:07 PM
          > Subject: Re: Fw: [BaylinerBuccaneerGroup] Batten Question for 240
          >
          >
          >  
          > Interesting.
          > Did you buy the boat new?
          > The reason I ask, is I have never seen bamboo (or wood of any type)battens. (Well, at least, not since the 1950s..) The sails provided with even the oldest Buccs would have been fiberglass.
          >
          > But I have used bamboo rods for a -temporary- batten, works quite well if you can find one the right size/stiffness.
          >
          > Sailrite has batten material by the foot in all the popular sizes.
          >
          > --- In BaylinerBuccaneerGroup@yahoogroups.com, Jbc <c670cj@> wrote:
          > >
          > > All four were originally bamboo material (wooden)...I still have all originals, and in perfect shape.
          > >  
          > > Going to the boat this weekend and will measure and take pictures if you'd like.
          > >  
          > > Jack
          > > 'Viajera' (The Time Capsule)
          > >
          > > ----- Forwarded Message -----
          > > From: Andres Espino <ima_very_cool_cowboy@>
          > > To: "BaylinerBuccaneerGroup@...@yahoogroups.com>
          > > Sent: Wednesday, March 20, 2013 11:38 AM
          > > Subject: [BaylinerBuccaneerGroup] Batten Question for 240
          > >
          > >  
          > >
          > > Hello Folks,
          > >
          > > Question for 240 owners!
          > >
          > >
          > > In going over my sails I see most of my Mainsail battens are missing!  All but 1 actually, and I see no size on it.  The mauinsail takes 4 battens.. anyone know what sizes they are and the numbers of them?
          > >
          > > Thanks,
          > >
          > > Andrew
          > >
          >
        • PhilC
          Pretty cool! That is something which today could be good for mfrs to re-discover. Bamboo being green and all..
          Message 4 of 16 , Mar 21, 2013
          • 0 Attachment
            Pretty cool!
            That is something which today could be good for mfrs to re-discover. Bamboo being "green" and all..

            --- In BaylinerBuccaneerGroup@yahoogroups.com, Jbc <c670cj@...> wrote:
            >
            >
            >.. battens were each bamboo, nicely varnished and tapered ....
          • Andres Espino
            The thing is i do not know whether each of my pockets takes a different width and length of batten....  Having dimensions will save a lot of trial and error
            Message 5 of 16 , Mar 21, 2013
            • 0 Attachment
              The thing is i do not know whether each of my pockets takes a different width and length of batten....  Having dimensions will save a lot of trial and error fitting.

              Andrew



              From: PhilC <PandD_Collins@...>
              To: BaylinerBuccaneerGroup@yahoogroups.com
              Sent: Thursday, March 21, 2013 1:45 PM
              Subject: Re: Fw: [BaylinerBuccaneerGroup] Batten Question for 240

               
              If you add up all the measurements, you can order one long piece. They coil it up and put it in a box.

              When you cut them, tape them at the cut, then cut through the tape.
              After sanding the ends smooth, if you have some fiberglass resin, you can seal the ends with it. You can do it with super glue also. No need if you have batten end caps.

              BUT - Shipping for short battens isn't a big deal - it's when you have a full battened sail and the battens are more than 8' long (I have a couple with 9' battens!) - the shipping then gets expensive real fast!

              --- In BaylinerBuccaneerGroup@yahoogroups.com, Andres Espino <ima_very_cool_cowboy@...> wrote:
              >
              > THAT SailRite stuff looks Amazing!  Also they will send long pieces coiled but warn you against injury because when released they open like a steel spring with great force.  This does mena no oversize shipping charges tho!
              >
              > http://www.sailrite.com/Batten-Pultruded-Material-1-5-8
              >
              >
              > Back up a page to select other sizes.
              >
              > With this stuff I only need to trace my pocket and make each one to fit.. sand and smooth the edges.
              >
              > Thanks Again!
              >
              > Andrew
              >
              >
              > ________________________________
              > From: PhilC <PandD_Collins@...>
              > To: BaylinerBuccaneerGroup@yahoogroups.com
              > Sent: Wednesday, March 20, 2013 5:07 PM
              > Subject: Re: Fw: [BaylinerBuccaneerGroup] Batten Question for 240
              >
              >
              >  
              > Interesting.
              > Did you buy the boat new?
              > The reason I ask, is I have never seen bamboo (or wood of any type)battens. (Well, at least, not since the 1950s..) The sails provided with even the oldest Buccs would have been fiberglass.
              >
              > But I have used bamboo rods for a -temporary- batten, works quite well if you can find one the right size/stiffness.
              >
              > Sailrite has batten material by the foot in all the popular sizes.
              >
              > --- In BaylinerBuccaneerGroup@yahoogroups.com, Jbc <c670cj@> wrote:
              > >
              > > All four were originally bamboo material (wooden)...I still have all originals, and in perfect shape.
              > >  
              > > Going to the boat this weekend and will measure and take pictures if you'd like.
              > >  
              > > Jack
              > > 'Viajera' (The Time Capsule)
              > >
              > > ----- Forwarded Message -----
              > > From: Andres Espino <ima_very_cool_cowboy@>
              > > To: "BaylinerBuccaneerGroup@...@yahoogroups.com>
              > > Sent: Wednesday, March 20, 2013 11:38 AM
              > > Subject: [BaylinerBuccaneerGroup] Batten Question for 240
              > >
              > >  
              > >
              > > Hello Folks,
              > >
              > > Question for 240 owners!
              > >
              > >
              > > In going over my sails I see most of my Mainsail battens are missing!  All but 1 actually, and I see no size on it.  The mauinsail takes 4 battens.. anyone know what sizes they are and the numbers of them?
              > >
              > > Thanks,
              > >
              > > Andrew
              > >
              >



            • Jbc
              width is the same throughout....lengths of course vary. I have them separated in the cabin so its easy to measure. JC ________________________________ From:
              Message 6 of 16 , Mar 21, 2013
              • 0 Attachment
                width is the same throughout....lengths of course vary.
                I have them separated in the cabin so its easy to measure.
                JC

                From: Andres Espino <ima_very_cool_cowboy@...>
                To: "BaylinerBuccaneerGroup@yahoogroups.com" <BaylinerBuccaneerGroup@yahoogroups.com>
                Sent: Thursday, March 21, 2013 3:58 PM
                Subject: Re: Fw: [BaylinerBuccaneerGroup] Batten Question for 240
                 
                The thing is i do not know whether each of my pockets takes a different width and length of batten....  Having dimensions will save a lot of trial and error fitting. Andrew


                From: PhilC <PandD_Collins@...>
                To: BaylinerBuccaneerGroup@yahoogroups.com
                Sent: Thursday, March 21, 2013 1:45 PM
                Subject: Re: Fw: [BaylinerBuccaneerGroup] Batten Question for 240
                 
                If you add up all the measurements, you can order one long piece. They coil it up and put it in a box. When you cut them, tape them at the cut, then cut through the tape. After sanding the ends smooth, if you have some fiberglass resin, you can seal the ends with it. You can do it with super glue also. No need if you have batten end caps. BUT - Shipping for short battens isn't a big deal - it's when you have a full battened sail and the battens are more than 8' long (I have a couple with 9' battens!) - the shipping then gets expensive real fast!
                --- In mailto:BaylinerBuccaneerGroup%40yahoogroups.com, Andres Espino <ima_very_cool_cowboy@...> wrote: > > THAT SailRite stuff looks Amazing!  Also they will send long pieces coiled but warn you against injury because when released they open like a steel spring with great force.  This does mena no oversize shipping charges tho! > > http://www.sailrite.com/Batten-Pultruded-Material-1-5-8 > > > Back up a page to select other sizes. > > With this stuff I only need to trace my pocket and make each one to fit.. sand and smooth the edges. > > Thanks Again! > > Andrew > > > ________________________________ > From: PhilC <PandD_Collins@...> > To: mailto:BaylinerBuccaneerGroup%40yahoogroups.com > Sent: Wednesday, March 20, 2013 5:07 PM > Subject: Re: Fw: [BaylinerBuccaneerGroup] Batten Question for 240 > > >   > Interesting. > Did you buy the boat new? > The reason I ask, is I have never seen bamboo (or wood of any type)battens. (Well, at least, not since the 1950s..) The sails provided with even the oldest Buccs would have been fiberglass. > > But I have used bamboo rods for a -temporary- batten, works quite well if you can find one the right size/stiffness. > > Sailrite has batten material by the foot in all the popular sizes. > > --- In mailto:BaylinerBuccaneerGroup%40yahoogroups.com, Jbc <c670cj@> wrote: > > > > All four were originally bamboo material (wooden)...I still have all originals, and in perfect shape. > >   > > Going to the boat this weekend and will measure and take pictures if you'd like. > >   > > Jack > > 'Viajera' (The Time Capsule) > > > > ----- Forwarded Message ----- > > From: Andres Espino <ima_very_cool_cowboy@> > > To: "BaylinerBuccaneerGroup@...@yahoogroups.com> > > Sent: Wednesday, March 20, 2013 11:38 AM > > Subject: [BaylinerBuccaneerGroup] Batten Question for 240 > > > >   > > > > Hello Folks, > > > > Question for 240 owners! > > > > > > In going over my sails I see most of my Mainsail battens are missing!  All but 1 actually, and I see no size on it.  The mauinsail takes 4 battens.. anyone know what sizes they are and the numbers of them? > > > > Thanks, > > > > Andrew > > >
              • Andres Espino
                hanks that would be great and much appreciated! Thanks again! Andrew ________________________________ From: Jbc To:
                Message 7 of 16 , Mar 21, 2013
                • 0 Attachment
                  hanks that would be great and much appreciated!

                  Thanks again!

                  Andrew


                  From: Jbc <c670cj@...>
                  To: "BaylinerBuccaneerGroup@yahoogroups.com" <BaylinerBuccaneerGroup@yahoogroups.com>
                  Sent: Thursday, March 21, 2013 2:12 PM
                  Subject: Re: Fw: [BaylinerBuccaneerGroup] Batten Question for 240

                   
                  width is the same throughout....lengths of course vary.
                  I have them separated in the cabin so its easy to measure.
                  JC

                  From: Andres Espino <ima_very_cool_cowboy@...>
                  To: "BaylinerBuccaneerGroup@yahoogroups.com" <BaylinerBuccaneerGroup@yahoogroups.com>
                  Sent: Thursday, March 21, 2013 3:58 PM
                  Subject: Re: Fw: [BaylinerBuccaneerGroup] Batten Question for 240
                   
                  The thing is i do not know whether each of my pockets takes a different width and length of batten....  Having dimensions will save a lot of trial and error fitting. Andrew


                  From: PhilC <PandD_Collins@...>
                  To: BaylinerBuccaneerGroup@yahoogroups.com
                  Sent: Thursday, March 21, 2013 1:45 PM
                  Subject: Re: Fw: [BaylinerBuccaneerGroup] Batten Question for 240
                   
                  If you add up all the measurements, you can order one long piece. They coil it up and put it in a box. When you cut them, tape them at the cut, then cut through the tape. After sanding the ends smooth, if you have some fiberglass resin, you can seal the ends with it. You can do it with super glue also. No need if you have batten end caps. BUT - Shipping for short battens isn't a big deal - it's when you have a full battened sail and the battens are more than 8' long (I have a couple with 9' battens!) - the shipping then gets expensive real fast!
                  --- In mailto:BaylinerBuccaneerGroup%40yahoogroups.com, Andres Espino <ima_very_cool_cowboy@...> wrote: > > THAT SailRite stuff looks Amazing!  Also they will send long pieces coiled but warn you against injury because when released they open like a steel spring with great force.  This does mena no oversize shipping charges tho! > > http://www.sailrite.com/Batten-Pultruded-Material-1-5-8 > > > Back up a page to select other sizes. > > With this stuff I only need to trace my pocket and make each one to fit.. sand and smooth the edges. > > Thanks Again! > > Andrew > > > ________________________________ > From: PhilC <PandD_Collins@...> > To: mailto:BaylinerBuccaneerGroup%40yahoogroups.com > Sent: Wednesday, March 20, 2013 5:07 PM > Subject: Re: Fw: [BaylinerBuccaneerGroup] Batten Question for 240 > > >   > Interesting. > Did you buy the boat new? > The reason I ask, is I have never seen bamboo (or wood of any type)battens. (Well, at least, not since the 1950s..) The sails provided with even the oldest Buccs would have been fiberglass. > > But I have used bamboo rods for a -temporary- batten, works quite well if you can find one the right size/stiffness. > > Sailrite has batten material by the foot in all the popular sizes. > > --- In mailto:BaylinerBuccaneerGroup%40yahoogroups.com, Jbc <c670cj@> wrote: > > > > All four were originally bamboo material (wooden)...I still have all originals, and in perfect shape. > >   > > Going to the boat this weekend and will measure and take pictures if you'd like. > >   > > Jack > > 'Viajera' (The Time Capsule) > > > > ----- Forwarded Message ----- > > From: Andres Espino <ima_very_cool_cowboy@> > > To: "BaylinerBuccaneerGroup@...@yahoogroups.com> > > Sent: Wednesday, March 20, 2013 11:38 AM > > Subject: [BaylinerBuccaneerGroup] Batten Question for 240 > > > >   > > > > Hello Folks, > > > > Question for 240 owners! > > > > > > In going over my sails I see most of my Mainsail battens are missing!  All but 1 actually, and I see no size on it.  The mauinsail takes 4 battens.. anyone know what sizes they are and the numbers of them? > > > > Thanks, > > > > Andrew > > >


                • PhilC
                  They should not. It is quite rare for different size battens to be used on the same sail, mostly seen on square top mains where the angled top batten is
                  Message 8 of 16 , Mar 25, 2013
                  • 0 Attachment
                    They should not. It is quite rare for different size battens to be used on the same sail, mostly seen on square top mains where the angled top batten is different from the others.
                    Width I mean, not length. It is (duh) VERy common to need different lengths for each batten...

                    --- In BaylinerBuccaneerGroup@yahoogroups.com, Andres Espino <ima_very_cool_cowboy@...> wrote:
                    >
                    > The thing is i do not know whether each of my pockets takes a different width and length of batten....  Having dimensions will save a lot of trial and error fitting.
                    >
                    > Andrew
                    >
                    >
                    >
                    >
                    > ________________________________
                    > From: PhilC <PandD_Collins@...>
                    > To: BaylinerBuccaneerGroup@yahoogroups.com
                    > Sent: Thursday, March 21, 2013 1:45 PM
                    > Subject: Re: Fw: [BaylinerBuccaneerGroup] Batten Question for 240
                    >
                    >
                    >  
                    > If you add up all the measurements, you can order one long piece. They coil it up and put it in a box.
                    >
                    > When you cut them, tape them at the cut, then cut through the tape.
                    > After sanding the ends smooth, if you have some fiberglass resin, you can seal the ends with it. You can do it with super glue also. No need if you have batten end caps.
                    >
                    > BUT - Shipping for short battens isn't a big deal - it's when you have a full battened sail and the battens are more than 8' long (I have a couple with 9' battens!) - the shipping then gets expensive real fast!
                    >
                    > --- In BaylinerBuccaneerGroup@yahoogroups.com, Andres Espino <ima_very_cool_cowboy@> wrote:
                    > >
                    > > THAT SailRite stuff looks Amazing!  Also they will send long pieces coiled but warn you against injury because when released they open like a steel spring with great force.  This does mena no oversize shipping charges tho!
                    > >
                    > > http://www.sailrite.com/Batten-Pultruded-Material-1-5-8
                    > >
                    > >
                    > > Back up a page to select other sizes.
                    > >
                    > > With this stuff I only need to trace my pocket and make each one to fit.. sand and smooth the edges.
                    > >
                    > > Thanks Again!
                    > >
                    > > Andrew
                    > >
                    > >
                    > > ________________________________
                    > > From: PhilC <PandD_Collins@>
                    > > To: BaylinerBuccaneerGroup@yahoogroups.com
                    > > Sent: Wednesday, March 20, 2013 5:07 PM
                    > > Subject: Re: Fw: [BaylinerBuccaneerGroup] Batten Question for 240
                    > >
                    > >
                    > >  
                    > > Interesting.
                    > > Did you buy the boat new?
                    > > The reason I ask, is I have never seen bamboo (or wood of any type)battens. (Well, at least, not since the 1950s..) The sails provided with even the oldest Buccs would have been fiberglass.
                    > >
                    > > But I have used bamboo rods for a -temporary- batten, works quite well if you can find one the right size/stiffness.
                    > >
                    > > Sailrite has batten material by the foot in all the popular sizes.
                    > >
                    > > --- In BaylinerBuccaneerGroup@yahoogroups.com, Jbc <c670cj@> wrote:
                    > > >
                    > > > All four were originally bamboo material (wooden)...I still have all originals, and in perfect shape.
                    > > >  
                    > > > Going to the boat this weekend and will measure and take pictures if you'd like.
                    > > >  
                    > > > Jack
                    > > > 'Viajera' (The Time Capsule)
                    > > >
                    > > > ----- Forwarded Message -----
                    > > > From: Andres Espino <ima_very_cool_cowboy@>
                    > > > To: "BaylinerBuccaneerGroup@@yahoogroups.com>
                    > > > Sent: Wednesday, March 20, 2013 11:38 AM
                    > > > Subject: [BaylinerBuccaneerGroup] Batten Question for 240
                    > > >
                    > > >  
                    > > >
                    > > > Hello Folks,
                    > > >
                    > > > Question for 240 owners!
                    > > >
                    > > >
                    > > > In going over my sails I see most of my Mainsail battens are missing!  All but 1 actually, and I see no size on it.  The mauinsail takes 4 battens.. anyone know what sizes they are and the numbers of them?
                    > > >
                    > > > Thanks,
                    > > >
                    > > > Andrew
                    > > >
                    > >
                    >
                  • Andres Espino
                    Yes I am going by the drawing of the 240 which shows 4 pockets.  My main is still in the sail bag where it has resided inside the prev owners house. Sailrite
                    Message 9 of 16 , Mar 25, 2013
                    • 0 Attachment
                      Yes I am going by the drawing of the 240 which shows 4 pockets.  My main is still in the sail bag where it has resided inside the prev owners house.

                      Sailrite shows the batten thickness to be all 1/8in and so the width and length and taper if there is one are the questions.

                      My last homebuilt sharpy of Glen-L design was a gaffer and the main had no battens at all.  Eventually I added lazy jacks and full length battens like a junk but without all those lines on the ends.  It did not affect the performance because I could not tack closer than 50 degrees to windward to begin with.

                      This 240 is the first Marconi rig I have ever had and so the first sail with battens in pockets.

                      I am about to raise the mast AGAIN.. it fell on me raising alone in December and did over $300 in damage.  I will not listen to those who said walk it up its light etc  LOL  THIS TIME I am building a standing A-Frame.  The main mast does only weigh about 70lbs but when attached to the mast step and lifting that 25 foot long pole from the lower end that upper end is incredibly heavy.

                      BUT then on a calm day I will load the main and see how it fits and so on.  Then i will measure the pockets.  I am in the AZ desert with rocks and dirt and cactus and other thorny stuff and I do not have a safe place to stretch my sail out on the ground.

                      Andrew



                      From: PhilC <PandD_Collins@...>
                      To: BaylinerBuccaneerGroup@yahoogroups.com
                      Sent: Monday, March 25, 2013 2:11 PM
                      Subject: Re: Fw: [BaylinerBuccaneerGroup] Batten Question for 240

                       
                      They should not. It is quite rare for different size battens to be used on the same sail, mostly seen on square top mains where the angled top batten is different from the others.
                      Width I mean, not length. It is (duh) VERy common to need different lengths for each batten...

                      --- In BaylinerBuccaneerGroup@yahoogroups.com, Andres Espino <ima_very_cool_cowboy@...> wrote:
                      >
                      > The thing is i do not know whether each of my pockets takes a different width and length of batten....  Having dimensions will save a lot of trial and error fitting.
                      >
                      > Andrew
                      >
                      >
                      >
                      >
                      > ________________________________
                      > From: PhilC <PandD_Collins@...>
                      > To: BaylinerBuccaneerGroup@yahoogroups.com
                      > Sent: Thursday, March 21, 2013 1:45 PM
                      > Subject: Re: Fw: [BaylinerBuccaneerGroup] Batten Question for 240
                      >
                      >
                      >  
                      > If you add up all the measurements, you can order one long piece. They coil it up and put it in a box.
                      >
                      > When you cut them, tape them at the cut, then cut through the tape.
                      > After sanding the ends smooth, if you have some fiberglass resin, you can seal the ends with it. You can do it with super glue also. No need if you have batten end caps.
                      >
                      > BUT - Shipping for short battens isn't a big deal - it's when you have a full battened sail and the battens are more than 8' long (I have a couple with 9' battens!) - the shipping then gets expensive real fast!
                      >
                      > --- In BaylinerBuccaneerGroup@yahoogroups.com, Andres Espino <ima_very_cool_cowboy@> wrote:
                      > >
                      > > THAT SailRite stuff looks Amazing!  Also they will send long pieces coiled but warn you against injury because when released they open like a steel spring with great force.  This does mena no oversize shipping charges tho!
                      > >
                      > > http://www.sailrite.com/Batten-Pultruded-Material-1-5-8
                      > >
                      > >
                      > > Back up a page to select other sizes.
                      > >
                      > > With this stuff I only need to trace my pocket and make each one to fit.. sand and smooth the edges.
                      > >
                      > > Thanks Again!
                      > >
                      > > Andrew
                      > >
                      > >
                      > > ________________________________
                      > > From: PhilC <PandD_Collins@>
                      > > To: BaylinerBuccaneerGroup@yahoogroups.com
                      > > Sent: Wednesday, March 20, 2013 5:07 PM
                      > > Subject: Re: Fw: [BaylinerBuccaneerGroup] Batten Question for 240
                      > >
                      > >
                      > >  
                      > > Interesting.
                      > > Did you buy the boat new?
                      > > The reason I ask, is I have never seen bamboo (or wood of any type)battens. (Well, at least, not since the 1950s..) The sails provided with even the oldest Buccs would have been fiberglass.
                      > >
                      > > But I have used bamboo rods for a -temporary- batten, works quite well if you can find one the right size/stiffness.
                      > >
                      > > Sailrite has batten material by the foot in all the popular sizes.
                      > >
                      > > --- In BaylinerBuccaneerGroup@yahoogroups.com, Jbc <c670cj@> wrote:
                      > > >
                      > > > All four were originally bamboo material (wooden)...I still have all originals, and in perfect shape.
                      > > >  
                      > > > Going to the boat this weekend and will measure and take pictures if you'd like.
                      > > >  
                      > > > Jack
                      > > > 'Viajera' (The Time Capsule)
                      > > >
                      > > > ----- Forwarded Message -----
                      > > > From: Andres Espino <ima_very_cool_cowboy@>
                      > > > To: "BaylinerBuccaneerGroup@@yahoogroups.com>
                      > > > Sent: Wednesday, March 20, 2013 11:38 AM
                      > > > Subject: [BaylinerBuccaneerGroup] Batten Question for 240
                      > > >
                      > > >  
                      > > >
                      > > > Hello Folks,
                      > > >
                      > > > Question for 240 owners!
                      > > >
                      > > >
                      > > > In going over my sails I see most of my Mainsail battens are missing!  All but 1 actually, and I see no size on it.  The mauinsail takes 4 battens.. anyone know what sizes they are and the numbers of them?
                      > > >
                      > > > Thanks,
                      > > >
                      > > > Andrew
                      > > >
                      > >
                      >



                    Your message has been successfully submitted and would be delivered to recipients shortly.