OR - Exotac nanoSTRIKER - Ray Estrella
- Hello all,
Here is a new OR. I don't have any lightweight packs to write about so how about the lightest fire starter instead? The HTML may be found here:
Exotac nanoSTRIKER fire starter
By Raymond Estrella
April 11, 2010
NAME: Raymond Estrella
LOCATION: Orange County, California, USA
HEIGHT: 6' 3" (1.91 m)
WEIGHT: 210 lb (95.30 kg)
I have been backpacking for over 30 years, all over California, plus many western states and Minnesota. I hike year-round in all weather, and average 500+ miles (800+ km) per year. I make a point of using lightweight gear, and smaller volume packs. Doubting I can ever be truly UL, I try to be as near to it as I can yet still be comfortable. I start early and hike hard so as to enjoy the afternoons exploring/chilling. I usually take a freestanding tent and enjoy hot meals at night. If not hiking solo I am usually with brother-in-law Dave.
Manufacturer: Exotac Inc
Web site: www.exotac.com
Year manufactured: 2009
MSRP: (US) $26.95
Weight listed: N/A
Actual weight: 0.5 oz (14 g)
Length listed: N/A
Actual length closed: 3.4 in (86 mm)
Actual length assembled: 4.2 in (107 mm)
Color: Black, also available in Gunmetal
The Exotac nanoSTRIKER fire starter is a small compact, collapsible fire starter.
Out of the box the nanoSTRIKER looks like a small machined aluminum rod with a steel lanyard-compatible end. A bit of exploration will show that the nanoSTRIKER unscrews into three pieces as seen below.
The steel top becomes the striker for the nanoSTRIKER. The "grip" part is 303 stainless steel that has been polished and bead blasted. The "striker" part is made of dark 440C steel and is finished in a heat-treat oven to bring its hardness to more than 50 Rockwell C.
The 6061 aircraft aluminum body becomes the "handle" of the fire starter. The machined knurling makes for a slip-free grip.
The last item that slid out of the body when taking the nanoSTRIKER apart is the ferrocerium rod. This is the part that makes sparks on modern fire strikers. The ferrocerium rod screws onto the handle to make the assembled fire starter seen below. Exotac says that the rod is rated for over 1000 strikes, and they sell replacement rods for the nanoSTRIKER. The nanoSTRIKER has o-rings at all the screw junctions to keep water out, but the ferrocerium rod will spark while wet too.
I have been carrying the nanoSTRIKER on every single day-hike and backpacking trip since January 2010. It has been as far south as the California/Mexico border and as far north as Tehachapi Pass. I have had it at elevations from near sea level to 11,500 ft (3505 m) on the peak of Mt San Gorgonio. Temperatures encountered have run from 14 to 70 F (-10 to 21 C).
I was first alerted as to the availability of the nanoSTRIKER after reading of it on a gear forum. When I saw how small the nanoSTRIKER was I knew I had to try it.
My first impression upon getting it was that it is an elegantly and smartly designed fire striker. The construction is flawless. There is not a sharp edge on it anywhere when it is collapsed. It is flat good looking to boot. My old fire starter is downright ugly compared to it.
I keep my fire striker attached to my emergency whistle. They are the two things I want with me all the time in the field and the nanoSTRIKER is much better for carrying in a pocket. The integrated striker lets me ditch the hanging striker of the unit I have been carrying for seven years too, so I have one less thing hanging from my whistle. The 50% weight reduction does not hurt either.
While I do not normally use my fire striker to light my stoves, just carrying it as a back-up to my lighter, I figured I better use this some to make sure that it works.
Well, it works quite well. I have just started playing with alcohol stoves and the nanoSTRIKER lights them easily. In fact the 324 F (180 C) sparks are melting little spots on the aluminum stoves! Here is a picture using the nanoSTRIKER at Lake Morena County Park as I get ready to boil water for dinner with my Trail Designs Caldera ULC. Notice the smoke curling up.
My brother-in-law Dave and I played with it at our office lighting Kleenex and lint balls on fire. We big boys never do lose our pyromaniac tendencies. We just start calling it "testing". Now where are some ants ?
I am completely happy with the nanoSTRIKER and plan to be carrying it for many years to come. I see that the company makes a match carrier, something I use more for camping in Minnesota than backpacking. I may get one of them to see if it has the same quality and thought put into it as the nanoSTRIKER does. If I do I shall get a review in here so check back often. ;-)
Disclaimer: no insects were hurt in the writing of this review.
"I measure happiness with an altimeter"
- PLEASE READ THIS EMAIL IN FULL. IT IS MOST IMPORTANT!
Thanks for your Owner's Review. It has been added to the Owner Review Queue and will be picked up by an Edit Moderator soon. If you are new to BackpackGearTest.org, welcome to the community! The Editors will work with you, within their own time constraints, to get your first two Owner Reviews approved and upload in a timely manner. Do not worry if nothing happens with it for several days. All our Editors are volunteers and your report will be subject to an official edit within fourteen days. If you have not had a response from an Edit Moderator via the Yahoo Groups list within this timeframe, please let me know directly at jdeben(at)hotmail.com
To assist in this process, if this is your first Owner Review we ask that you post only ONE Owner Review for edit at a time. Our experience is that it is more efficient for both the Editors and
yourself, if you post your first review, have it edited, approved and uploaded before you post your second and subsequent reviews.
Once your first two Owner Reviews have been approved and you have submitted your Tester Agreement you will be eligible to start applying for Tests. If you'd like more assistance or guidance with the process you can request a mentor by sending an email to Jenn K., the mentor coordinator, at mentor (at) backpackgeartest.org.
You may receive edits or comments from other members of the group. These edits and comments, while not official, should be considered carefully, and if you find them substantial, revise and re-post your review. Incorporating member edits and re-submitting to the list
will usually result in a better review, as well as making things easier for the official Editor. Please put REVISED in the subject line of your re-submitted review if you take this route or make any
changes to your review BEFORE the review has been taken by an Edit Moderator.
Additionally, it is important for you to monitor the Yahoo Groups list to keep track of the progress of your Owner Review. Once an Editor has taken your OR and made the necessary edits they will post their comments to the list with EDIT in the subject line. Once you have incorporated these edits into your review please use REPOST in the subject line. When your OR has been approved by the Editor they will use APPROVED in the subject line.
If you'd like to keep track of the progress of your OR while itâs in the edit queue, the entire Owner Review Queue is posted to this yahoo group list on either Thursdays or Fridays.
If you have any further questions, please do not hesitate to ask via the list or contact me directly.
Edit Administration Manager