Loading ...
Sorry, an error occurred while loading the content.

Re: How do you clean your grinder?

Expand Messages
  • jack_burien
    Every couple of months I disassemble the grinder and scour the parts. I just like to tinker mechanically and so that s my procedure. jack in fl :-)
    Message 1 of 4 , Mar 28 5:39 AM
    • 0 Attachment
      Every couple of months I disassemble the grinder and scour the parts. I just like to tinker mechanically and so that's my procedure. jack in fl :-)

      --- In BUG-is-Bunn@yahoogroups.com, "Tex" <texas-coffee@...> wrote:
      >
      > When I first got a big commercial grinder I was advised to use Urnex Grindz weekly to keep the grind chamber clean. A few years later I decided to check the burrs for sharpness, and couldn't get the upper burr carrier out of the machine.
      >
      > Turns out that Grinds doesn't clean all that well, plus it does nothing about the accumulation of gunk on the burr carrier threads. When the threads get gunked up it's pretty-near impossible to unscrew the upper carrier. I had to jury rig a friends vise to hold the lower part of the body while I applied a 4 foot pipe wrench and a lot of penetrating oil before I could get it out. So I'd say Grindz sucks!
      >
      > Now I do an semiannual partial disassembly of my grinder to clean out the grind chamber manually. I scrape and scour until all traces of coffee buildup is gone.
      >
      > So, how do you clean your grinder?
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.