Loading ...
Sorry, an error occurred while loading the content.

Grinder ?

Expand Messages
  • jack_burien
    Well, the Bunn is up and running just fine. Time to go looking for an acceptable grinder. There was recent discussion on this list about the Cunill
    Message 1 of 27 , Apr 9, 2011
    • 0 Attachment
      Well, the Bunn is up and running just fine. Time to go looking for an acceptable grinder. There was recent discussion on this list about the Cunill Tranquilo. Does anyone have first hand knowledge of this machine, good and bad? Are there any others close to that price range that would give an acceptable grind? The Braun with its 40mm worn head is just not cutting it ($5 at a garage sale). jack in Fl :-)
    • Rick
      I found a Anfim Haus with doser on craigslist for 80.00, it may not be the 500.00 super grinder but I found it works great, parts are plentiful and reasonable
      Message 2 of 27 , Apr 9, 2011
      • 0 Attachment
        I found a Anfim Haus with doser on craigslist for 80.00, it may not be the 500.00 super grinder but I found it works great, parts are plentiful and reasonable
        Rick

        --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" <jack_burien@...> wrote:
        >
        > Well, the Bunn is up and running just fine. Time to go looking for an acceptable grinder. There was recent discussion on this list about the Cunill Tranquilo. Does anyone have first hand knowledge of this machine, good and bad? Are there any others close to that price range that would give an acceptable grind? The Braun with its 40mm worn head is just not cutting it ($5 at a garage sale). jack in Fl :-)
        >
      • Tex
        I used a Tranquilo for a while and it did a very good job - even better when you figure it only costs $235! I haven t tried it yet (I ll get one to try for a
        Message 3 of 27 , Apr 10, 2011
        • 0 Attachment
          I used a Tranquilo for a while and it did a very good job - even better when you figure it only costs $235!

          I haven't tried it yet (I'll get one to try for a week and I'll report on it then.), but this is the latest: http://www.orphanespresso.com/OE-PHAROS-Hand-Coffee-Grinder_p_3977.html Priced at $245 and with 68mm conical burrs, this should be a great grinder. Here's a video: http://www.youtube.com/watch?v=rHNRX8NG0sk#ws]OE PHAROS Hand Coffee Grinder Demo

          Tex

          > --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" <jack_burien@> wrote:
          > >
          > > Well, the Bunn is up and running just fine. Time to go looking for an acceptable grinder. There was recent discussion on this list about the Cunill Tranquilo. Does anyone have first hand knowledge of this machine, good and bad? Are there any others close to that price range that would give an acceptable grind? The Braun with its 40mm worn head is just not cutting it ($5 at a garage sale). jack in Fl :-)
          > >
          >
        • jack_burien
          I d be interested in your opinion. I don t know if I m enough of a purist to hand crank each shot.....I guess if you re only doing one or two a day that might
          Message 4 of 27 , Apr 10, 2011
          • 0 Attachment
            I'd be interested in your opinion. I don't know if I'm enough of a purist to hand crank each shot.....I guess if you're only doing one or two a day that might be acceptable, but what if you're doing twenty a day....hmmmmm jack in fl :-)

            --- In BUG-is-Bunn@yahoogroups.com, "Tex" <Texas_Coffee@...> wrote:
            >
            > I used a Tranquilo for a while and it did a very good job - even better when you figure it only costs $235!
            >
            > I haven't tried it yet (I'll get one to try for a week and I'll report on it then.), but this is the latest: http://www.orphanespresso.com/OE-PHAROS-Hand-Coffee-Grinder_p_3977.html Priced at $245 and with 68mm conical burrs, this should be a great grinder. Here's a video: http://www.youtube.com/watch?v=rHNRX8NG0sk#ws]OE PHAROS Hand Coffee Grinder Demo
            >
            > Tex
            >
            > > --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" <jack_burien@> wrote:
            > > >
            > > > Well, the Bunn is up and running just fine. Time to go looking for an acceptable grinder. There was recent discussion on this list about the Cunill Tranquilo. Does anyone have first hand knowledge of this machine, good and bad? Are there any others close to that price range that would give an acceptable grind? The Braun with its 40mm worn head is just not cutting it ($5 at a garage sale). jack in Fl :-)
            > > >
            > >
            >
          • DanB
            ... Hi Jack, I,m ordering the new Baratza Preciso this week ($300) to try out against my 2 commercial espresso and the Bunn drip commercial grinder. I
            Message 5 of 27 , Apr 10, 2011
            • 0 Attachment
              --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" <jack_burien@...> wrote:
              >
              > Well, the Bunn is up and running just fine. Time to go looking for an acceptable grinder. There was recent discussion on this list about the Cunill Tranquilo. Does anyone have first hand knowledge of this machine, good and bad? Are there any others close to that price range that would give an acceptable grind? The Braun with its 40mm worn head is just not cutting it ($5 at a garage sale). jack in Fl :-)
              >

              Hi Jack, I,m ordering the new Baratza Preciso this week ($300) to try out against my 2 commercial espresso and the Bunn drip commercial grinder. I will have an opinion in a week or so if you are in no hurry.

              Dan
            • jack_burien
              No hurry at all...thanks for responding j :-)
              Message 6 of 27 , Apr 10, 2011
              • 0 Attachment
                No hurry at all...thanks for responding j :-)

                --- In BUG-is-Bunn@yahoogroups.com, "DanB" <danrbrewer@...> wrote:
                >
                >
                >
                > --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" <jack_burien@> wrote:
                > >
                > > Well, the Bunn is up and running just fine. Time to go looking for an acceptable grinder. There was recent discussion on this list about the Cunill Tranquilo. Does anyone have first hand knowledge of this machine, good and bad? Are there any others close to that price range that would give an acceptable grind? The Braun with its 40mm worn head is just not cutting it ($5 at a garage sale). jack in Fl :-)
                > >
                >
                > Hi Jack, I,m ordering the new Baratza Preciso this week ($300) to try out against my 2 commercial espresso and the Bunn drip commercial grinder. I will have an opinion in a week or so if you are in no hurry.
                >
                > Dan
                >
              • Tim Fischer
                I bought a Tranquilo for my sister about 6 months ago. It grinds very nice. The hopper design is less than perfect in that beans don t flow very well... A
                Message 7 of 27 , Apr 10, 2011
                • 0 Attachment
                  I bought a Tranquilo for my sister about 6 months ago. It grinds very nice.
                  The hopper design is less than perfect in that beans don't flow very well... A
                  lot of people seem to chuck the hopper and just use a styrofoam cup with the
                  bottom cut out in its place, weigh enough beans for a double, pour them in and
                  set the tamper on top. I prefer to just throw a few days worth of beans in the
                  hopper and so I ended up pulling the little plastic anti-pop-corning piece out
                  of the hopper and solved my bean flow problems. I got the doserless model and
                  it has less clumping issues than my NS MDX doser.





                  ________________________________
                  From: jack_burien <jack_burien@...>
                  To: BUG-is-Bunn@yahoogroups.com
                  Sent: Sat, April 9, 2011 9:57:59 PM
                  Subject: [BUG] Grinder ?


                  Well, the Bunn is up and running just fine. Time to go looking for an
                  acceptable grinder. There was recent discussion on this list about the Cunill
                  Tranquilo. Does anyone have first hand knowledge of this machine, good and bad?
                  Are there any others close to that price range that would give an acceptable
                  grind? The Braun with its 40mm worn head is just not cutting it ($5 at a garage
                  sale). jack in Fl :-)




                  [Non-text portions of this message have been removed]
                • jack_burien
                  I need a new grinder and have a chance to pick up a Cunill with doser at a reasonable price. How does this make rate? good, fair, excellent, not worth the
                  Message 8 of 27 , Jan 24, 2013
                  • 0 Attachment
                    I need a new grinder and have a chance to pick up a Cunill with doser at a reasonable price. How does this make rate? good, fair, excellent, not worth the price at any price? tia jack in fl
                  • Tex
                    There are many models of Cunill, and I ve heard nothing but good about all of them. Which one in particular are you looking at? Tex
                    Message 9 of 27 , Jan 24, 2013
                    • 0 Attachment
                      There are many models of Cunill, and I've heard nothing but good about all of them. Which one in particular are you looking at?

                      Tex

                      --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" wrote:
                      >
                      > I need a new grinder and have a chance to pick up a Cunill with doser at a reasonable price. How does this make rate? good, fair, excellent, not worth the price at any price? tia jack in fl
                      >
                    • Chuck Hancock
                      Jack,. sorry I have never used that brand.   ... From: jack_burien Subject: [BUG] Grinder ? To: BUG-is-Bunn@yahoogroups.com Date:
                      Message 10 of 27 , Jan 25, 2013
                      • 0 Attachment
                        Jack,. sorry I have never used that brand.  

                        --- On Thu, 1/24/13, jack_burien <jack_burien@...> wrote:

                        From: jack_burien <jack_burien@...>
                        Subject: [BUG] Grinder ?
                        To: BUG-is-Bunn@yahoogroups.com
                        Date: Thursday, January 24, 2013, 7:23 PM
















                         









                        I need a new grinder and have a chance to pick up a Cunill with doser at a reasonable price. How does this make rate? good, fair, excellent, not worth the price at any price? tia jack in fl



























                        [Non-text portions of this message have been removed]
                      • Paul Albert Acosta
                        All commercial Cunill models are excellant. Some Models have been rebranded. I have great results with my grinder. Espresso to You! Paul Albert Acosta
                        Message 11 of 27 , Jan 25, 2013
                        • 0 Attachment
                          All commercial Cunill models are excellant. Some Models have been rebranded. I have great results with my grinder.

                          Espresso to You!

                          Paul Albert Acosta

                          [Non-text portions of this message have been removed]
                        • Chuck Hancock
                          Does anyone know where I can get a plastic hopper for a Bunn Express grinder. Thanks Sent from my iPad ... [Non-text portions of this message have been
                          Message 12 of 27 , Jan 25, 2013
                          • 0 Attachment
                            Does anyone know where I can get a plastic hopper for a Bunn Express grinder. Thanks

                            Sent from my iPad

                            On Jan 25, 2013, at 11:08 AM, Paul Albert Acosta <paul_albert_acosta@...> wrote:

                            > All commercial Cunill models are excellant. Some Models have been rebranded. I have great results with my grinder.
                            >
                            > Espresso to You!
                            >
                            > Paul Albert Acosta
                            >
                            > [Non-text portions of this message have been removed]
                            >
                            >


                            [Non-text portions of this message have been removed]
                          • jack_burien
                            I m looking at the Tauro model. I think they go for about $400, but I can get one slightly used(looks like new inside and out) for a bit less than half...j
                            Message 13 of 27 , Jan 25, 2013
                            • 0 Attachment
                              I'm looking at the "Tauro" model. I think they go for about $400, but I can get one slightly used(looks like new inside and out) for a bit less than half...j

                              --- In BUG-is-Bunn@yahoogroups.com, "Tex" wrote:
                              >
                              > There are many models of Cunill, and I've heard nothing but good about all of them. Which one in particular are you looking at?
                              >
                              > Tex
                              >
                              > --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" wrote:
                              > >
                              > > I need a new grinder and have a chance to pick up a Cunill with doser at a reasonable price. How does this make rate? good, fair, excellent, not worth the price at any price? tia jack in fl
                              > >
                              >
                            • Tex
                              This one? http://www.creativecoffee.ca/Coffee-Grinders-Electric/Cunhill/Cunhill-Tauro-DoserGrinder-p210/ First thing I always tell folks is to check the burrs
                              Message 14 of 27 , Jan 25, 2013
                              • 0 Attachment
                                This one?

                                http://www.creativecoffee.ca/Coffee-Grinders-Electric/Cunhill/Cunhill-Tauro-DoserGrinder-p210/

                                First thing I always tell folks is to check the burrs by dragging the machined edges over a thumbnail. If they're OK they'll dig into the nail and shave off a bit. Figure in the cost of new burrs if they're dull.

                                Tex

                                --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" wrote:
                                >
                                > I'm looking at the "Tauro" model. I think they go for about $400, but I can get one slightly used(looks like new inside and out) for a bit less than half...j
                                >
                                > --- In BUG-is-Bunn@yahoogroups.com, "Tex" wrote:
                                > >
                                > > There are many models of Cunill, and I've heard nothing but good about all of them. Which one in particular are you looking at?
                                > >
                                > > Tex
                                > >
                                > > --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" wrote:
                                > > >
                                > > > I need a new grinder and have a chance to pick up a Cunill with doser at a reasonable price. How does this make rate? good, fair, excellent, not worth the price at any price? tia jack in fl
                                > > >
                                > >
                                >
                              • Chuck Hancock
                                Tex, do you rebuild ES-1A s? If I send it to you can i pay you to go thru it? Mine works but still does not have enough water flow. I suspect it is just
                                Message 15 of 27 , Jan 25, 2013
                                • 0 Attachment
                                  Tex, do you rebuild ES-1A's? If I send it to you can i pay you to go thru it? Mine works but still does not have enough water flow. I suspect it is just dirty inside as I did not know about running cleaner thru it for a long time. I have some cleaner on order and will try that but if that does not do it I would like to find someone to go thru it. Let me know. thanks

                                  Sent from my iPad

                                  On Jan 25, 2013, at 1:39 PM, "Tex" <texas-coffee@...> wrote:

                                  > This one?
                                  >
                                  > http://www.creativecoffee.ca/Coffee-Grinders-Electric/Cunhill/Cunhill-Tauro-DoserGrinder-p210/
                                  >
                                  > First thing I always tell folks is to check the burrs by dragging the machined edges over a thumbnail. If they're OK they'll dig into the nail and shave off a bit. Figure in the cost of new burrs if they're dull.
                                  >
                                  > Tex
                                  >
                                  > --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" wrote:
                                  > >
                                  > > I'm looking at the "Tauro" model. I think they go for about $400, but I can get one slightly used(looks like new inside and out) for a bit less than half...j
                                  > >
                                  > > --- In BUG-is-Bunn@yahoogroups.com, "Tex" wrote:
                                  > > >
                                  > > > There are many models of Cunill, and I've heard nothing but good about all of them. Which one in particular are you looking at?
                                  > > >
                                  > > > Tex
                                  > > >
                                  > > > --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" wrote:
                                  > > > >
                                  > > > > I need a new grinder and have a chance to pick up a Cunill with doser at a reasonable price. How does this make rate? good, fair, excellent, not worth the price at any price? tia jack in fl
                                  > > > >
                                  > > >
                                  > >
                                  >
                                  >


                                  [Non-text portions of this message have been removed]
                                • Tex
                                  I only work on my machines. Rather than running cleaner through the machine, I recommend a partial/complete disassembly to clean it. They re fairly simple to
                                  Message 16 of 27 , Jan 25, 2013
                                  • 0 Attachment
                                    I only work on my machines.

                                    Rather than running cleaner through the machine, I recommend a partial/complete disassembly to clean it. They're fairly simple to work on if you take lots of pictures, and mark all the wiring as you take it apart.

                                    Besides, once you understand how they go together I'm convinced you'll make better espresso with it.

                                    Tex

                                    --- In BUG-is-Bunn@yahoogroups.com, Chuck Hancock wrote:
                                    >
                                    > Tex, do you rebuild ES-1A's? If I send it to you can i pay you to go thru it? Mine works but still does not have enough water flow. I suspect it is just dirty inside as I did not know about running cleaner thru it for a long time. I have some cleaner on order and will try that but if that does not do it I would like to find someone to go thru it. Let me know. thanks
                                    >
                                    > Sent from my iPad
                                    >
                                    > On Jan 25, 2013, at 1:39 PM, "Tex" wrote:
                                    >
                                    > > This one?
                                    > >
                                    > > http://www.creativecoffee.ca/Coffee-Grinders-Electric/Cunhill/Cunhill-Tauro-DoserGrinder-p210/
                                    > >
                                    > > First thing I always tell folks is to check the burrs by dragging the machined edges over a thumbnail. If they're OK they'll dig into the nail and shave off a bit. Figure in the cost of new burrs if they're dull.
                                    > >
                                    > > Tex
                                    > >
                                    > > --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" wrote:
                                    > > >
                                    > > > I'm looking at the "Tauro" model. I think they go for about $400, but I can get one slightly used(looks like new inside and out) for a bit less than half...j
                                    > > >
                                    > > > --- In BUG-is-Bunn@yahoogroups.com, "Tex" wrote:
                                    > > > >
                                    > > > > There are many models of Cunill, and I've heard nothing but good about all of them. Which one in particular are you looking at?
                                    > > > >
                                    > > > > Tex
                                    > > > >
                                    > > > > --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" wrote:
                                    > > > > >
                                    > > > > > I need a new grinder and have a chance to pick up a Cunill with doser at a reasonable price. How does this make rate? good, fair, excellent, not worth the price at any price? tia jack in fl
                                    > > > > >
                                    > > > >
                                    > > >
                                    > >
                                    > >
                                    >
                                    >
                                    > [Non-text portions of this message have been removed]
                                    >
                                  • jack_burien
                                    Chuck. I you are in so Fl or thereabouts, I can also help you with the cleaning, etc. jack in so Fl
                                    Message 17 of 27 , Jan 25, 2013
                                    • 0 Attachment
                                      Chuck. I you are in so Fl or thereabouts, I can also help you with the cleaning, etc. jack in so Fl

                                      --- In BUG-is-Bunn@yahoogroups.com, Chuck Hancock wrote:
                                      >
                                      > Tex, do you rebuild ES-1A's? If I send it to you can i pay you to go thru it? Mine works but still does not have enough water flow. I suspect it is just dirty inside as I did not know about running cleaner thru it for a long time. I have some cleaner on order and will try that but if that does not do it I would like to find someone to go thru it. Let me know. thanks
                                      >
                                      > Sent from my iPad
                                      >
                                      > On Jan 25, 2013, at 1:39 PM, "Tex" wrote:
                                      >
                                      > > This one?
                                      > >
                                      > > http://www.creativecoffee.ca/Coffee-Grinders-Electric/Cunhill/Cunhill-Tauro-DoserGrinder-p210/
                                      > >
                                      > > First thing I always tell folks is to check the burrs by dragging the machined edges over a thumbnail. If they're OK they'll dig into the nail and shave off a bit. Figure in the cost of new burrs if they're dull.
                                      > >
                                      > > Tex
                                      > >
                                      > > --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" wrote:
                                      > > >
                                      > > > I'm looking at the "Tauro" model. I think they go for about $400, but I can get one slightly used(looks like new inside and out) for a bit less than half...j
                                      > > >
                                      > > > --- In BUG-is-Bunn@yahoogroups.com, "Tex" wrote:
                                      > > > >
                                      > > > > There are many models of Cunill, and I've heard nothing but good about all of them. Which one in particular are you looking at?
                                      > > > >
                                      > > > > Tex
                                      > > > >
                                      > > > > --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" wrote:
                                      > > > > >
                                      > > > > > I need a new grinder and have a chance to pick up a Cunill with doser at a reasonable price. How does this make rate? good, fair, excellent, not worth the price at any price? tia jack in fl
                                      > > > > >
                                      > > > >
                                      > > >
                                      > >
                                      > >
                                      >
                                      >
                                      > [Non-text portions of this message have been removed]
                                      >
                                    • Chuck Hancock
                                      Jack, I just took the head of the machine apart I took the brass valve out of the head and cleaned it really good .  I also ran some coffee machine cleaner
                                      Message 18 of 27 , Jan 25, 2013
                                      • 0 Attachment
                                        Jack, I just took the "head" of the machine apart "I took the brass valve out of the head and cleaned it really good".  I also ran some coffee machine cleaner thru it and it seems better but not as good as it was some years ago.  I will keep you in mind if I cant get it going the way I want.  Thanks for offering to help

                                        --- On Fri, 1/25/13, jack_burien <jack_burien@...> wrote:

                                        From: jack_burien <jack_burien@...>
                                        Subject: [BUG] Re: Grinder ?
                                        To: BUG-is-Bunn@yahoogroups.com
                                        Date: Friday, January 25, 2013, 2:47 PM
















                                         









                                        Chuck. I you are in so Fl or thereabouts, I can also help you with the cleaning, etc. jack in so Fl



                                        --- In BUG-is-Bunn@yahoogroups.com, Chuck Hancock wrote:

                                        >

                                        > Tex, do you rebuild ES-1A's? If I send it to you can i pay you to go thru it? Mine works but still does not have enough water flow. I suspect it is just dirty inside as I did not know about running cleaner thru it for a long time. I have some cleaner on order and will try that but if that does not do it I would like to find someone to go thru it. Let me know. thanks

                                        >

                                        > Sent from my iPad

                                        >

                                        > On Jan 25, 2013, at 1:39 PM, "Tex" wrote:

                                        >

                                        > > This one?

                                        > >

                                        > > http://www.creativecoffee.ca/Coffee-Grinders-Electric/Cunhill/Cunhill-Tauro-DoserGrinder-p210/

                                        > >

                                        > > First thing I always tell folks is to check the burrs by dragging the machined edges over a thumbnail. If they're OK they'll dig into the nail and shave off a bit. Figure in the cost of new burrs if they're dull.

                                        > >

                                        > > Tex

                                        > >

                                        > > --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" wrote:

                                        > > >

                                        > > > I'm looking at the "Tauro" model. I think they go for about $400, but I can get one slightly used(looks like new inside and out) for a bit less than half...j

                                        > > >

                                        > > > --- In BUG-is-Bunn@yahoogroups.com, "Tex" wrote:

                                        > > > >

                                        > > > > There are many models of Cunill, and I've heard nothing but good about all of them. Which one in particular are you looking at?

                                        > > > >

                                        > > > > Tex

                                        > > > >

                                        > > > > --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" wrote:

                                        > > > > >

                                        > > > > > I need a new grinder and have a chance to pick up a Cunill with doser at a reasonable price. How does this make rate? good, fair, excellent, not worth the price at any price? tia jack in fl

                                        > > > > >

                                        > > > >

                                        > > >

                                        > >

                                        > >

                                        >

                                        >

                                        > [Non-text portions of this message have been removed]

                                        >



























                                        [Non-text portions of this message have been removed]
                                      • Chuck Hancock
                                        Thanks.  i did just take the head apart and cleaned the brass water spreader .   It is a plug that makes the water spread out as it come thru the head.  I
                                        Message 19 of 27 , Jan 25, 2013
                                        • 0 Attachment
                                          Thanks.  i did just take the head apart and cleaned the brass "water spreader".   It is a plug that makes the water spread out as it come thru the head.  I will see where I get with the cleaning solution I have ordered.  Thanks again

                                          --- On Fri, 1/25/13, Tex <texas-coffee@...> wrote:

                                          From: Tex <texas-coffee@...>
                                          Subject: [BUG] Re: Grinder ?
                                          To: BUG-is-Bunn@yahoogroups.com
                                          Date: Friday, January 25, 2013, 2:32 PM
















                                           









                                          I only work on my machines.



                                          Rather than running cleaner through the machine, I recommend a partial/complete disassembly to clean it. They're fairly simple to work on if you take lots of pictures, and mark all the wiring as you take it apart.



                                          Besides, once you understand how they go together I'm convinced you'll make better espresso with it.



                                          Tex



                                          --- In BUG-is-Bunn@yahoogroups.com, Chuck Hancock wrote:

                                          >

                                          > Tex, do you rebuild ES-1A's? If I send it to you can i pay you to go thru it? Mine works but still does not have enough water flow. I suspect it is just dirty inside as I did not know about running cleaner thru it for a long time. I have some cleaner on order and will try that but if that does not do it I would like to find someone to go thru it. Let me know. thanks

                                          >

                                          > Sent from my iPad

                                          >

                                          > On Jan 25, 2013, at 1:39 PM, "Tex" wrote:

                                          >

                                          > > This one?

                                          > >

                                          > > http://www.creativecoffee.ca/Coffee-Grinders-Electric/Cunhill/Cunhill-Tauro-DoserGrinder-p210/

                                          > >

                                          > > First thing I always tell folks is to check the burrs by dragging the machined edges over a thumbnail. If they're OK they'll dig into the nail and shave off a bit. Figure in the cost of new burrs if they're dull.

                                          > >

                                          > > Tex

                                          > >

                                          > > --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" wrote:

                                          > > >

                                          > > > I'm looking at the "Tauro" model. I think they go for about $400, but I can get one slightly used(looks like new inside and out) for a bit less than half...j

                                          > > >

                                          > > > --- In BUG-is-Bunn@yahoogroups.com, "Tex" wrote:

                                          > > > >

                                          > > > > There are many models of Cunill, and I've heard nothing but good about all of them. Which one in particular are you looking at?

                                          > > > >

                                          > > > > Tex

                                          > > > >

                                          > > > > --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" wrote:

                                          > > > > >

                                          > > > > > I need a new grinder and have a chance to pick up a Cunill with doser at a reasonable price. How does this make rate? good, fair, excellent, not worth the price at any price? tia jack in fl

                                          > > > > >

                                          > > > >

                                          > > >

                                          > >

                                          > >

                                          >

                                          >

                                          > [Non-text portions of this message have been removed]

                                          >



























                                          [Non-text portions of this message have been removed]
                                        • Chuck Hancock
                                          Can someone tell me the name of the Spanish that manufactured the ES-1A for Bunn? Thanks Sent from my iPad
                                          Message 20 of 27 , Feb 10, 2014
                                          • 0 Attachment
                                            Can someone tell me the name of the Spanish that manufactured the ES-1A for Bunn?  Thanks

                                            Sent from my iPad

                                            On Jan 25, 2013, at 2:47 PM, "jack_burien" <jack_burien@...> wrote:

                                             

                                            Chuck. I you are in so Fl or thereabouts, I can also help you with the cleaning, etc. jack in so Fl

                                            --- In BUG-is-Bunn@yahoogroups.com, Chuck Hancock wrote:
                                            >
                                            > Tex, do you rebuild ES-1A's? If I send it to you can i pay you to go thru it? Mine works but still does not have enough water flow. I suspect it is just dirty inside as I did not know about running cleaner thru it for a long time. I have some cleaner on order and will try that but if that does not do it I would like to find someone to go thru it. Let me know. thanks
                                            >
                                            > Sent from my iPad
                                            >
                                            > On Jan 25, 2013, at 1:39 PM, "Tex" wrote:
                                            >
                                            > > This one?
                                            > >
                                            > > http://www.creativecoffee.ca/Coffee-Grinders-Electric/Cunhill/Cunhill-Tauro-DoserGrinder-p210/
                                            > >
                                            > > First thing I always tell folks is to check the burrs by dragging the machined edges over a thumbnail. If they're OK they'll dig into the nail and shave off a bit. Figure in the cost of new burrs if they're dull.
                                            > >
                                            > > Tex
                                            > >
                                            > > --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" wrote:
                                            > > >
                                            > > > I'm looking at the "Tauro" model. I think they go for about $400, but I can get one slightly used(looks like new inside and out) for a bit less than half...j
                                            > > >
                                            > > > --- In BUG-is-Bunn@yahoogroups.com, "Tex" wrote:
                                            > > > >
                                            > > > > There are many models of Cunill, and I've heard nothing but good about all of them. Which one in particular are you looking at?
                                            > > > >
                                            > > > > Tex
                                            > > > >
                                            > > > > --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" wrote:
                                            > > > > >
                                            > > > > > I need a new grinder and have a chance to pick up a Cunill with doser at a reasonable price. How does this make rate? good, fair, excellent, not worth the price at any price? tia jack in fl
                                            > > > > >
                                            > > > >
                                            > > >
                                            > >
                                            > >
                                            >
                                            >
                                            > [Non-text portions of this message have been removed]
                                            >

                                          • dmankin
                                            Cunill
                                            Message 21 of 27 , Feb 10, 2014
                                            • 0 Attachment
                                              Cunill
                                            • dmankin
                                              Sorry for that quick - wrong reply. The ES-1A is a rebadged Futurmat Milady.
                                              Message 22 of 27 , Feb 10, 2014
                                              • 0 Attachment
                                                Sorry for that quick - wrong reply.  The ES-1A is a rebadged Futurmat Milady.
                                              • sh8knj8kster
                                                Sorry for that quick - wrong reply. The ES-1A is a rebadged Futurmat Milady. ~~~David, the milady was the name of the machine sent to England (IIRC), milady
                                                Message 23 of 27 , Feb 11, 2014
                                                • 0 Attachment
                                                  Sorry for that quick - wrong reply.  The ES-1A is a rebadged Futurmat Milady.



                                                  ~~~David, the milady was the name of the machine sent to England (IIRC), milady instead of ES-1A...Gaggia is the manufacturer in Spain, who also built my Futurmat Rimini, on the same line...which needs to be put back together still<LOL>

                                                  Speaking of espresso, I have to sort out why I have no power to the heater in my Vetrano's boiler...first time I couldn't make coffee with it in 3 + years of ownership

                                                  FWIW, I checked out the heating element...it's fine, I have to look elsewhere.  today's coffee is going to have to be drip=:-(


                                                  Best,


                                                  Jake
                                                  Reddick Fla.
                                                • Robert Vandervoort
                                                  Futurmat Melitta
                                                  Message 24 of 27 , Feb 28, 2014
                                                  • 0 Attachment

                                                    Futurmat Melitta

                                                    On Feb 10, 2014 10:40 AM, "Chuck Hancock" <chuck63@...> wrote:
                                                     

                                                    Can someone tell me the name of the Spanish that manufactured the ES-1A for Bunn?  Thanks

                                                    Sent from my iPad

                                                    On Jan 25, 2013, at 2:47 PM, "jack_burien" <jack_burien@...> wrote:

                                                     

                                                    Chuck. I you are in so Fl or thereabouts, I can also help you with the cleaning, etc. jack in so Fl

                                                    --- In BUG-is-Bunn@yahoogroups.com, Chuck Hancock wrote:
                                                    >
                                                    > Tex, do you rebuild ES-1A's? If I send it to you can i pay you to go thru it? Mine works but still does not have enough water flow. I suspect it is just dirty inside as I did not know about running cleaner thru it for a long time. I have some cleaner on order and will try that but if that does not do it I would like to find someone to go thru it. Let me know. thanks
                                                    >
                                                    > Sent from my iPad
                                                    >
                                                    > On Jan 25, 2013, at 1:39 PM, "Tex" wrote:
                                                    >
                                                    > > This one?
                                                    > >
                                                    > > http://www.creativecoffee.ca/Coffee-Grinders-Electric/Cunhill/Cunhill-Tauro-DoserGrinder-p210/
                                                    > >
                                                    > > First thing I always tell folks is to check the burrs by dragging the machined edges over a thumbnail. If they're OK they'll dig into the nail and shave off a bit. Figure in the cost of new burrs if they're dull.
                                                    > >
                                                    > > Tex
                                                    > >
                                                    > > --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" wrote:
                                                    > > >
                                                    > > > I'm looking at the "Tauro" model. I think they go for about $400, but I can get one slightly used(looks like new inside and out) for a bit less than half...j
                                                    > > >
                                                    > > > --- In BUG-is-Bunn@yahoogroups.com, "Tex" wrote:
                                                    > > > >
                                                    > > > > There are many models of Cunill, and I've heard nothing but good about all of them. Which one in particular are you looking at?
                                                    > > > >
                                                    > > > > Tex
                                                    > > > >
                                                    > > > > --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" wrote:
                                                    > > > > >
                                                    > > > > > I need a new grinder and have a chance to pick up a Cunill with doser at a reasonable price. How does this make rate? good, fair, excellent, not worth the price at any price? tia jack in fl
                                                    > > > > >
                                                    > > > >
                                                    > > >
                                                    > >
                                                    > >
                                                    >
                                                    >
                                                    > [Non-text portions of this message have been removed]
                                                    >

                                                  • Chuck Hancock
                                                    Jack, got your offer of the loan. I am on my way to the hardware store to get a gauge. I am sure I can make it up. Thanks, I will set it to about 120 pounds
                                                    Message 25 of 27 , Mar 12 11:11 AM
                                                    • 0 Attachment
                                                      Jack, got your offer of the loan.  I am on my way to the hardware store to get a gauge.  I am sure I can make it up. Thanks, I will set it to about 120 pounds

                                                      Sent from my iPad

                                                      On Jan 25, 2013, at 2:47 PM, "jack_burien" <jack_burien@...> wrote:

                                                       

                                                      Chuck. I you are in so Fl or thereabouts, I can also help you with the cleaning, etc. jack in so Fl

                                                      --- In BUG-is-Bunn@yahoogroups.com, Chuck Hancock wrote:
                                                      >
                                                      > Tex, do you rebuild ES-1A's? If I send it to you can i pay you to go thru it? Mine works but still does not have enough water flow. I suspect it is just dirty inside as I did not know about running cleaner thru it for a long time. I have some cleaner on order and will try that but if that does not do it I would like to find someone to go thru it. Let me know. thanks
                                                      >
                                                      > Sent from my iPad
                                                      >
                                                      > On Jan 25, 2013, at 1:39 PM, "Tex" wrote:
                                                      >
                                                      > > This one?
                                                      > >
                                                      > > http://www.creativecoffee.ca/Coffee-Grinders-Electric/Cunhill/Cunhill-Tauro-DoserGrinder-p210/
                                                      > >
                                                      > > First thing I always tell folks is to check the burrs by dragging the machined edges over a thumbnail. If they're OK they'll dig into the nail and shave off a bit. Figure in the cost of new burrs if they're dull.
                                                      > >
                                                      > > Tex
                                                      > >
                                                      > > --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" wrote:
                                                      > > >
                                                      > > > I'm looking at the "Tauro" model. I think they go for about $400, but I can get one slightly used(looks like new inside and out) for a bit less than half...j
                                                      > > >
                                                      > > > --- In BUG-is-Bunn@yahoogroups.com, "Tex" wrote:
                                                      > > > >
                                                      > > > > There are many models of Cunill, and I've heard nothing but good about all of them. Which one in particular are you looking at?
                                                      > > > >
                                                      > > > > Tex
                                                      > > > >
                                                      > > > > --- In BUG-is-Bunn@yahoogroups.com, "jack_burien" wrote:
                                                      > > > > >
                                                      > > > > > I need a new grinder and have a chance to pick up a Cunill with doser at a reasonable price. How does this make rate? good, fair, excellent, not worth the price at any price? tia jack in fl
                                                      > > > > >
                                                      > > > >
                                                      > > >
                                                      > >
                                                      > >
                                                      >
                                                      >
                                                      > [Non-text portions of this message have been removed]
                                                      >

                                                    Your message has been successfully submitted and would be delivered to recipients shortly.