Loading ...
Sorry, an error occurred while loading the content.

Locating Pins

Expand Messages
  • jack_burien
    I am in need of at least two of the locating pins that secure the bottom edge of a side panel. If you have any spares or know a source of said pins, I would
    Message 1 of 3 , Feb 5, 2011
    • 0 Attachment
      I am in need of at least two of the locating pins that secure the bottom edge of a side panel. If you have any spares or know a source of said pins, I would appreciate a response. The Bunn part number is 23648. Thanks jackb :-)
    • ed benton
      Are you talking the rounded pointed pins that fit into the hole?  If so, then take a small bolt and use a grinder to grind it down to a similar shape.
      Message 2 of 3 , Feb 5, 2011
      • 0 Attachment
        Are you talking the rounded pointed pins that fit into the hole?  If so, then
        take a small bolt and use a grinder to grind it down to a similar shape.





        ________________________________
        From: jack_burien <jack_burien@...>
        To: BUG-is-Bunn@yahoogroups.com
        Sent: Sat, February 5, 2011 8:50:55 AM
        Subject: [BUG] Locating Pins

         
        I am in need of at least two of the locating pins that secure the bottom edge of
        a side panel. If you have any spares or know a source of said pins, I would
        appreciate a response. The Bunn part number is 23648. Thanks jackb :-)







        [Non-text portions of this message have been removed]
      • jack_burien
        The locating pins are attached to a 3mm threaded stem. Attaching and grinding a piece to fit or starting with a larger diameter section is beyond the scope of
        Message 3 of 3 , Feb 6, 2011
        • 0 Attachment
          The locating pins are attached to a 3mm threaded stem. Attaching and grinding a piece to fit or starting with a larger diameter section is beyond the scope of this user. I just thought someone might have said pins in excess and would be willing to sell them. Short of that, I'll end up bolting the sides on to the base frame; something I would prefer not to do. jack in fl :-)

          --- In BUG-is-Bunn@yahoogroups.com, "Tex" <Texas_Coffee@...> wrote:
          >
          > Makes a lot of sense, so why did you post that here? ;-)
          >
          > Tex
          >
          > --- In BUG-is-Bunn@yahoogroups.com, ed benton <edward09603@> wrote:
          > >
          > > Are you talking the rounded pointed pins that fit into the hole?  If so, then
          > > take a small bolt and use a grinder to grind it down to a similar shape.
          > >
          > >
          > >
          > >
          > >
          > > ________________________________
          > > From: jack_burien <jack_burien@>
          > > To: BUG-is-Bunn@yahoogroups.com
          > > Sent: Sat, February 5, 2011 8:50:55 AM
          > > Subject: [BUG] Locating Pins
          > >
          > >  
          > > I am in need of at least two of the locating pins that secure the bottom edge of
          > > a side panel. If you have any spares or know a source of said pins, I would
          > > appreciate a response. The Bunn part number is 23648. Thanks jackb :-)
          > >
          > >
          > >
          > >
          > >
          > >
          > >
          > > [Non-text portions of this message have been removed]
          > >
          >
        Your message has been successfully submitted and would be delivered to recipients shortly.