2883Membrane Pad and ribbon cable
- May 3 8:40 PMCheck the ribbon cable connections to the pad and the board also check the ribbon cable for continuity. The red wire on the ribbon cable supplies the power from the board to the pad. Your pad may not be configured correctly or bad usually due to water intrusion.
Paul Albert Acosta
Date: Sun, 3 May 2009 21:47:41 +0000
Subject: [BUG] Re: Chris' ES1A Rebuild
I am ordering from cafeparts.com tonight. Gonna get M6 and M8 to be safe. All the parts plus a new shower screen.
I have noticed another issues with the machine. The red continous flow is flashing like it's in program mode and none of the other buttons appear to work. The only way to pull is shot is using this button. This machine used to have the key'ed RUN/PROGRAM switch as well as the manual toggle. The key has been removed and I am only using the toggle. If the toggle is removed completely and the brown lines are open I can pull shots with the red button only. If the toggle in installed, closing the circuit I can't pull shots from any buttons. Anyone else see this?
Visit Your Group
Yahoo! for Good
by a good cause.
Get it Free!
easy 1-click access
to your groups.
Start a group
in 3 easy steps.
Connect with others.
Hotmail� has ever-growing storage! Don�t worry about storage limits.
[Non-text portions of this message have been removed]
- << Previous post in topic Next post in topic >>