Loading ...
Sorry, an error occurred while loading the content.
Advanced Search
Author
Subject
Message
Special notice only

Advanced Search
  • Problem solved, it was i Winlink CMS problem Thanks Thomas
    thomasbostrom1@... Oct 21, 2016
  • My linbpq RMS gateway has not done any reporting to APRS for 10 days? (via WL2KREPORT ......) 73 SM0YOS /Thomas
    thomasbostrom1@... Oct 19, 2016
  • John, Where can I find the latest source version? /Thomas
    thomasbostrom1@... Aug 9, 2016
  • Fetching Sponsored Content...
  • My current linbpq installation version 6.0.12.1 will not connect to winlink cms. Are there any changes in winlink? are my linbpq version to old or .... /Thomas
    thomasbostrom1@... Aug 9, 2016
  • John, I am running a Linux Centos 5.10 system, the port i a usbserial port and I has changed the port speed to 38400 baud with the stty command without any success, still just 46 bytes of data out on the radio port from the tnc, Can it be some kind of "line length limit" or that Kiss data set some "break" value on the port ? Just thinking .... 73 Thomas
    thomasbostrom1@... Mar 29, 2014
  • John, I have setup a BPQ32 in Windows and there are no problem with truncated messages. Same config, same tnc and same radio, But in Linux I have these problem. Are there any parameter to try in Linux? Buffers size etc? Max message length seems to be 46 bytes + headers. 73 Thomas
    thomasbostrom1@... Mar 28, 2014
  • I am running Argent Datas OT3m tracker as a Kiss tnc. But the output will be truncated after approx 48-50 chars.Looking in to stats for the port there are a lot of L2 Timeouts?? My port config: (stolen) PORT PORTNUM=4 ;KAM TNC Port VHF ID=144.925 MHz TYPE=ASYNC ; Port is RS232 Com PROTOCOL=KISS ; TNC is used in KISS mode ;KISSOPTIONS=ACKMODE FULLDUP=0 ; Only meaningful for KISS...
    thomasbostrom1@... Mar 25, 2014
  • John Ok, thanks 73 Thomas
    thomasbostrom1@... Mar 24, 2014
  • I have connected a kiss tnc to my Linux Centos system. The address to the tnc is /dev/ttyACM1, how do I define the tnc in my port setup ? 73 Thomas
    thomasbostrom1@... Mar 24, 2014
  • Richard, Ok thanks 73 Thomas
    thomasbostrom1@... Mar 16, 2014