Re: [BPQ32] Re: hf 300 baud
- On 40m, there's a group of us in VK who use a paclen of 40, and it seems to be a good compromise. I haven't done any 20m packet before, but as a starting point I'd probably try using that same value.
73, Matt VK2RQ.
On 13/03/2013, at 10:37 PM, "James Mcdowall" <james.mcdowall4@...> wrote:
> What would you recomend John for HF ?
> Cheers jim
> --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
>> No - the TNC will set the on-air baud rate.
>> But you might want to look at some of the parameters, especially MAXFRAME,
>> and PACLEN, and maybe FRACK. beofre you start transmitting.
>> 73, John
>> From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
>> James Mcdowall
>> Sent: 12 March 2013 16:25
>> To: BPQ32@yahoogroups.com
>> Subject: [BPQ32] hf 300 baud
>> Just a quick question i have put a 20m port on 14.100 its only on rx mode at
>> this moment in time (antenna needs moving)
>> do i have to put anything in t he port config to say its in 300b mode ?
>> below is the port cfg for the 20m port
>> ID=HF 14.100
>> cheers jim
> Yahoo! Groups Links