Loading ...
Sorry, an error occurred while loading the content.
 

RE: [BPQ32] Node Values

Expand Messages
  • John Wiseman
    Peter, MINQUAL (in the main section of the config) applies to all NETROM neighbours , and MAXHOPS and MAXRTT apply to all INP3 neighbours. You can reduce the
    Message 1 of 4 , Mar 10, 2013
      Peter,
       
      MINQUAL (in the main section of the config) applies to all NETROM neighbours , and MAXHOPS and MAXRTT apply to all INP3 neighbours.
       
      You can reduce the incoming quailty of an individuial NETROM neighbour by locking a route (in ROUTES: section) to a lower route quaility value. There is no equivalent option for INP3 (though perhaps there should be).
       
      The PORT section MINQUAL limits what you send in your NODES broadcasts.
       
      73, John


      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Peter - ZL2BAU
      Sent: 10 March 2013 06:40
      To: BPQ32@yahoogroups.com
      Subject: [BPQ32] Node Values

       


      Hi All,

      Does any one have a good way to limit node broadcasts from link
      partners.

      Apart from MINQUAL etc etc, there does not appear to be any other way to
      do it ?

      Regards ..... Peter

    • Peter - ZL2BAU
      ... Hi John, One does not remember how much one has forgot until the required information is needed. Thank you John, that is one less problem I have to solve.
      Message 2 of 4 , Mar 10, 2013
        On 10/03/13 22:10, John Wiseman wrote:
         

        Peter,
         
        MINQUAL (in the main section of the config) applies to all NETROM neighbours , and MAXHOPS and MAXRTT apply to all INP3 neighbours.
         
        You can reduce the incoming quailty of an individuial NETROM neighbour by locking a route (in ROUTES: section) to a lower route quaility value. There is no equivalent option for INP3 (though perhaps there should be).
         
        The PORT section MINQUAL limits what you send in your NODES broadcasts.
         
        73, John
        ._,___










        Hi John,

                   One does not remember how much one has forgot until the required information is needed.

        Thank you John, that is one less problem I have to solve.

        Regards ..... Peter

      Your message has been successfully submitted and would be delivered to recipients shortly.