Loading ...
Sorry, an error occurred while loading the content.

Re: [BPQ32] pilinbpq

Expand Messages
  • Dennis Nelson
    No, after running it as root it came up ok. I ll add the USER record for mangment for you, then when i m sure everythings running right i ll inittab the bpq as
    Message 1 of 9 , Feb 23, 2013
    • 0 Attachment
      No, after running it as root it came up ok. I'll add the USER record for mangment for you, then when i'm sure everythings running right i'll inittab the bpq as a daemon. Later.


      From: Mike <mmelnik1@...>
      To: BPQ32@yahoogroups.com
      Sent: Saturday, February 23, 2013 3:19 PM
      Subject: RE: [BPQ32] pilinbpq

       
      Dennis

      Are you running two programs at the same time with the same UDP allocated?

      Mike N9PMO
      www.n9pmo.com
      -----Original Message-----
      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Dennis Nelson
      Sent: Saturday, February 23, 2013 3:07 PM
      To: BPQ32@yahoogroups.com
      Subject: Re: [BPQ32] pilinbpq

      ooopppsss, my bad. It was still in uppercase, fixed that now. What I have now is a udp socket bind error, might have to comment that out for now.
      Thanks Dennis.

      From: John Wiseman john.wiseman@...>
      To: BPQ32@yahoogroups.com
      Sent: Saturday, February 23, 2013 2:51 PM
      Subject: RE: [BPQ32] pilinbpq

      
      It can''t find bpq32.cfg. Either it isn't in the right folder or the name is wrong (it is case sensitive - it must be bpq32.cfg in lower case)

      John


      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Dennis Nelson
      Sent: 23 February 2013 20:34
      To: BPQ32@yahoogroups.com
      Subject: Re: [BPQ32] pilinbpq

      Right now it's a configuration file error, i'll have to check the error log i suppose. Here's what i've got under the teminal.

      8BPQ AX25 Packet Switch System Version 6.0.0.79 February 2013
      Copyright � 2001-2013 John Wiseman G8BPQ
      Current Directory is /home/pi/linbpq

      Configuration file Preprocessor.
      Could not open file /home/pi/linbpq/bpq32.cfg
      Configuration File Error

      Possible that I'll have to comment out a couple of things.

      From: John Wiseman john.wiseman@...>
      To: BPQ32@yahoogroups.com
      Sent: Saturday, February 23, 2013 2:16 PM
      Subject: RE: [BPQ32] pilinbpq

      Dennis,

      The full set aren't implemented yet included are

      KISS AXIP BPQETHER TELNET SCSTRACKER SCSPACTOR WINMOR UZ7HO.

      What error message are you getting?

      73, John

      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Dennis Nelson
      Sent: 23 February 2013 20:01
      To: BPQ32@yahoogroups.com
      Subject: [BPQ32] pilinbpq

      Hey John, are the various drivers for axip telnet and others built into the program for the pi version of lin bpq? I'm in process of setting one up for Mike N9PMO, but i'm getting a config error on startup. Thanks, Dennis KB9RRX



    Your message has been successfully submitted and would be delivered to recipients shortly.