Loading ...
Sorry, an error occurred while loading the content.

RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

Expand Messages
  • Mike Melnik
    Jeff After running WinFbb 7.01-35 also know as 7.01A for a couple of years I finally gave up and switched To WFBB 7.00E 32 Bit with BPQ32U latest Version 410D,
    Message 1 of 21 , Mar 15, 2008
    • 0 Attachment

      Jeff

       

      After running WinFbb 7.01-35 also know as 7.01A for a couple of years I finally gave up and switched

      To WFBB 7.00E 32 Bit with BPQ32U latest Version 410D, to many BUGS in 7.01A.

       I also use Telpac for Winlink connections, AGWPE isn’t needed as the BPQ32U has an AGWtoBPQ look a like

       for programs needing AGWPE but if you want, AGWPE can be used with BPQ32U, for me AGWPE is just one

      less program I don’t need running.

       

      One problem with all of the 16 Bit WFBB 7.00E, G and I is the processor usage is 100% where as the

      32 Bit 7.00E runs nicely at 6%, if you are running W2K or XP a couple of changes need to be made

      to make the Maintenance (Housekeeping) program to work.

       

      As to a list of active BBS’S yes you are right it is hard to find, I will be more then happy to help you out

      With all needed Programs and Files for BPQ and WFBB.

       

      BTW most Winlink Uses/Nodes are switching from TELPAC to ether Packlink or RMS BETA.

       

      Mike Melnik
      N9PMO
      E-Mails Scanned By Symantec Corporate A/V
       
       

      -----Original Message-----
      From:
      BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Jeff
      Sent: Saturday, March 15, 2008 11:32 AM
      To:
      BPQ32@yahoogroups.com
      Subject: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

       

      Hey guys/gals,

      I'm seriously contemplating a new PBBS for my area here in Northern
      Kentucky and have a few questions maybe this group can help answer for me.

      Is there a good list of current PBBS's out there for the USA? I've
      looked around some on the net, but I haven't really found a one-stop
      listing. I find some single state lists and most of them are really
      old lists.

      I've lightly perused over some of the documents out there, BTW the
      best are found here on this group. I gather there are some bugs in
      FBB when used with BPQ32? Just curious what these are in brief?

      Anyone on the list willing to give me some do's, dont's, and things to
      watch out for with BPQ32 and WinFBB?

      Latest version of WinFBB (which looks to be 7.00i) good to use, or is
      one of the prior versions better? Sometimes the latest and greatest
      isn't always the greatest ;-)

      I gather the Win32 WinFBB is pretty much Alpha software and the Win16
      stuff is much more stable?

      Can I, or better stated, has anyone ran WinFBB and BPQ32 alongside
      WinLink on the same TNC/Radio? AGW the route to go for this if it's
      possible? Would kind of like to offer a WinLink telpac station for
      the area, but maximize existing equipment if possible.

      I'd probably have to go with a VHF/UHF local port and forward via the
      internet. Pros and cons of this? How would I go about, or who do I
      contact, for forwarding arrangements and so forth?

      Thanks in advance for your patience with my questions!

      73
      Jeff
      WA4ZKO

    • abertheaume
      Hi Jeff BPQ32 and FBB run together very well. I ve embedded some comments to your questions below.. ... A good concrete list is hard to come by Jeff. But to
      Message 2 of 21 , Mar 15, 2008
      • 0 Attachment
        Hi Jeff
        BPQ32 and FBB run together very well. I've embedded some comments
        to your questions below..

        --- In BPQ32@yahoogroups.com, "Jeff" <wa4zko@...> wrote:


        > Is there a good list of current PBBS's out there for the USA? I've
        > looked around some on the net, but I haven't really found a one-stop
        > listing. I find some single state lists and most of them are really
        > old lists.

        A good concrete list is hard to come by Jeff. But to get some sort of
        idea of who is connecting to who, visit this web page:

        http://fwnet.jp/?WWW_MENU=m030200

        The information presented is accurate and dynamic, it changes from
        time-to-time, It is however incomplete. Not every forwarding
        partnership out there is displayed.

        > I've lightly perused over some of the documents out there, BTW the
        > best are found here on this group. I gather there are some bugs in
        > FBB when used with BPQ32? Just curious what these are in brief?
        >
        > Anyone on the list willing to give me some do's, dont's, and things
        to
        > watch out for with BPQ32 and WinFBB?

        Several files that come packaged with FBB are outdated, they will not
        function correctly on a newer O/S. There are updated replacement
        files you will need to obtain. The files you will need will depend on
        which version of FBB you choose.


        > Latest version of WinFBB (which looks to be 7.00i) good to use, or
        is
        > one of the prior versions better? Sometimes the latest and greatest
        > isn't always the greatest ;-)
        >
        > I gather the Win32 WinFBB is pretty much Alpha software and the
        Win16
        > stuff is much more stable?

        Personally, I have been using FBBv7.00e for years. It is very stable
        with BPQ32. Again, certain files will need to be replaced, but once
        configured and running, you really don't have to do much with it.

        > Can I, or better stated, has anyone ran WinFBB and BPQ32 alongside
        > WinLink on the same TNC/Radio? AGW the route to go for this if it's
        > possible? Would kind of like to offer a WinLink telpac station for
        > the area, but maximize existing equipment if possible.

        Yes, you can run Telpac (or their BetaRMS telpac replacement) with
        BPQ32. You can configure things to run with AGW but AGW isn't
        required.

        >
        > I'd probably have to go with a VHF/UHF local port and forward via
        the
        > internet. Pros and cons of this? How would I go about, or who do I
        > contact, for forwarding arrangements and so forth?

        I am sure once you are up and running and wish to solicit internet
        forwarding, I don't think the moderators will scold you if you do so
        on this group. There are quite a few BPQ32/BBS Syops that subscribe
        to this group and would be glad to forward with you.

        If I can be of any help to you Jeff, you can email me direct or
        continue to post your questions here. That is what the group is for,
        to help out where help is needed.

        73
        Art, N9ZZK

        >
        > Thanks in advance for your patience with my questions!
        >
        > 73
        > Jeff
        > WA4ZKO
        >
      • David Calder
        Well. It s up and running just fine. I have one forward protocol error with one BBS and the rest work fine. I would say it s not me. BPQ 410D is sweet and
        Message 3 of 21 , Mar 15, 2008
        • 0 Attachment
          Well. It's up and running just fine. I have one forward protocol error with one
          BBS and the rest work fine. I would say it's not me. BPQ 410D is sweet
          and working with FBB. The telnet port is working just fine.
           
          This is also running on a machine with my CC Cluster AND AR Cluster
          DX nodes! They all are playing nicely together.
           
          The only thing left is the RF ports. Mike! Got an example KISS port
          for 410D?? It's been years since I ran a kiss port as I had the DRSI all
          the time.
           
          Thanks,
           
          73 Dave
          n4zkf
           
           


          From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Mike Melnik
          Sent: Saturday, March 15, 2008 12:57 PM
          To: BPQ32@yahoogroups.com
          Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

          Jeff

           

          After running WinFbb 7.01-35 also know as 7.01A for a couple of years I finally gave up and switched

          To WFBB 7.00E 32 Bit with BPQ32U latest Version 410D, to many BUGS in 7.01A.

           I also use Telpac for Winlink connections, AGWPE isn’t needed as the BPQ32U has an AGWtoBPQ look a like

           for programs needing AGWPE but if you want, AGWPE can be used with BPQ32U, for me AGWPE is just one

          less program I don’t need running.

           

          One problem with all of the 16 Bit WFBB 7.00E, G and I is the processor usage is 100% where as the

          32 Bit 7.00E runs nicely at 6%, if you are running W2K or XP a couple of changes need to be made

          to make the Maintenance (Housekeeping) program to work.

           

          As to a list of active BBS’S yes you are right it is hard to find, I will be more then happy to help you out

          With all needed Programs and Files for BPQ and WFBB.

           

          BTW most Winlink Uses/Nodes are switching from TELPAC to ether Packlink or RMS BETA.

           

          Mike Melnik
          N9PMO
          E-Mails Scanned By Symantec Corporate A/V
           
           

          -----Original Message-----
          From:
          BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com] On Behalf Of Jeff
          Sent: Saturday, March 15, 2008 11:32 AM
          To:
          BPQ32@yahoogroups. com
          Subject: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

           

          Hey guys/gals,

          I'm seriously contemplating a new PBBS for my area here in Northern
          Kentucky and have a few questions maybe this group can help answer for me.

          Is there a good list of current PBBS's out there for the USA? I've
          looked around some on the net, but I haven't really found a one-stop
          listing. I find some single state lists and most of them are really
          old lists.

          I've lightly perused over some of the documents out there, BTW the
          best are found here on this group. I gather there are some bugs in
          FBB when used with BPQ32? Just curious what these are in brief?

          Anyone on the list willing to give me some do's, dont's, and things to
          watch out for with BPQ32 and WinFBB?

          Latest version of WinFBB (which looks to be 7.00i) good to use, or is
          one of the prior versions better? Sometimes the latest and greatest
          isn't always the greatest ;-)

          I gather the Win32 WinFBB is pretty much Alpha software and the Win16
          stuff is much more stable?

          Can I, or better stated, has anyone ran WinFBB and BPQ32 alongside
          WinLink on the same TNC/Radio? AGW the route to go for this if it's
          possible? Would kind of like to offer a WinLink telpac station for
          the area, but maximize existing equipment if possible.

          I'd probably have to go with a VHF/UHF local port and forward via the
          internet. Pros and cons of this? How would I go about, or who do I
          contact, for forwarding arrangements and so forth?

          Thanks in advance for your patience with my questions!

          73
          Jeff
          WA4ZKO

        • Mike Melnik
          Dave N4ZKF K4GBB needs to check his V Statement in your forwarding block, he is probably missing the Period Example: V .N9PMO$WPassWord$W The Period stops
          Message 4 of 21 , Mar 15, 2008
          • 0 Attachment

            Dave N4ZKF

             

            K4GBB needs to check his V Statement in your forwarding block, he is probably missing the

            Period Example:   V .N9PMO$WPassWord$W

             

            The Period stops the echo and starts the Handshaking upon connection.

             

            I will send you the Kiss stuff to your E-Mail Address.

             

            Mike Melnik
            N9PMO
            E-Mails Scanned By Symantec Corporate A/V
             
             

            -----Original Message-----
            From:
            BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of David Calder
            Sent: Saturday, March 15, 2008 2:35 PM
            To:
            BPQ32@yahoogroups.com
            Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

             

            Well. It's up and running just fine. I have one forward protocol error with one

            BBS and the rest work fine. I would say it's not me. BPQ 410D is sweet

            and working with FBB. The telnet port is working just fine.

             

            This is also running on a machine with my CC Cluster AND AR Cluster

            DX nodes! They all are playing nicely together.

             

            The only thing left is the RF ports. Mike! Got an example KISS port

            for 410D?? It's been years since I ran a kiss port as I had the DRSI all

            the time.

             

            Thanks,

             

            73 Dave

            n4zkf

            www.n4zkf.com

             

             

             


            From: BPQ32@yahoogroups. com [mailto:BPQ32@ yahoogroups. com] On Behalf Of Mike Melnik
            Sent: Saturday, March 15, 2008 12:57 PM
            To: BPQ32@yahoogroups. com
            Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

            Jeff

             

            After running WinFbb 7.01-35 also know as 7.01A for a couple of years I finally gave up and switched

            To WFBB 7.00E 32 Bit with BPQ32U latest Version 410D, to many BUGS in 7.01A.

             I also use Telpac for Winlink connections, AGWPE isn’t needed as the BPQ32U has an AGWtoBPQ look a like

             for programs needing AGWPE but if you want, AGWPE can be used with BPQ32U, for me AGWPE is just one

            less program I don’t need running.

             

            One problem with all of the 16 Bit WFBB 7.00E, G and I is the processor usage is 100% where as the

            32 Bit 7.00E runs nicely at 6%, if you are running W2K or XP a couple of changes need to be made

            to make the Maintenance (Housekeeping) program to work.

             

            As to a list of active BBS’S yes you are right it is hard to find, I will be more then happy to help you out

            With all needed Programs and Files for BPQ and WFBB.

             

            BTW most Winlink Uses/Nodes are switching from TELPAC to ether Packlink or RMS BETA.

             

            Mike Melnik
            N9PMO
            E-Mails Scanned By Symantec Corporate A/V
             
             

            -----Original Message-----
            From: BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com] On Behalf Of Jeff
            Sent: Saturday, March 15, 2008 11:32 AM
            To: BPQ32@yahoogroups. com
            Subject: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

             

            Hey guys/gals,

            I'm seriously contemplating a new PBBS for my area here in Northern
            Kentucky and have a few questions maybe this group can help answer for me.

            Is there a good list of current PBBS's out there for the USA? I've
            looked around some on the net, but I haven't really found a one-stop
            listing. I find some single state lists and most of them are really
            old lists.

            I've lightly perused over some of the documents out there, BTW the
            best are found here on this group. I gather there are some bugs in
            FBB when used with BPQ32? Just curious what these are in brief?

            Anyone on the list willing to give me some do's, dont's, and things to
            watch out for with BPQ32 and WinFBB?

            Latest version of WinFBB (which looks to be 7.00i) good to use, or is
            one of the prior versions better? Sometimes the latest and greatest
            isn't always the greatest ;-)

            I gather the Win32 WinFBB is pretty much Alpha software and the Win16
            stuff is much more stable?

            Can I, or better stated, has anyone ran WinFBB and BPQ32 alongside
            WinLink on the same TNC/Radio? AGW the route to go for this if it's
            possible? Would kind of like to offer a WinLink telpac station for
            the area, but maximize existing equipment if possible.

            I'd probably have to go with a VHF/UHF local port and forward via the
            internet. Pros and cons of this? How would I go about, or who do I
            contact, for forwarding arrangements and so forth?

            Thanks in advance for your patience with my questions!

            73
            Jeff
            WA4ZKO

          • David Calder
            OK, I added the new KISS port to bpqcfg.txt. re-ran bpqconfig. It still shows the old port. Have I been at this too long today? What an I missing? _____ From:
            Message 5 of 21 , Mar 15, 2008
            • 0 Attachment
              OK, I added the new KISS port to bpqcfg.txt. re-ran bpqconfig. It still shows
              the old port. Have I been at this too long today? What an I missing?
               


              From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Mike Melnik
              Sent: Saturday, March 15, 2008 4:20 PM
              To: BPQ32@yahoogroups.com
              Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

              Dave N4ZKF

               

              K4GBB needs to check his V Statement in your forwarding block, he is probably missing the

              Period Example:   V .N9PMO$WPassWord$ W

               

              The Period stops the echo and starts the Handshaking upon connection.

               

              I will send you the Kiss stuff to your E-Mail Address.

               

              Mike Melnik
              N9PMO
              E-Mails Scanned By Symantec Corporate A/V
               
               

              -----Original Message-----
              From:
              BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com] On Behalf Of David Calder
              Sent: Saturday, March 15, 2008 2:35 PM
              To:
              BPQ32@yahoogroups. com
              Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

               

              Well. It's up and running just fine. I have one forward protocol error with one

              BBS and the rest work fine. I would say it's not me. BPQ 410D is sweet

              and working with FBB. The telnet port is working just fine.

               

              This is also running on a machine with my CC Cluster AND AR Cluster

              DX nodes! They all are playing nicely together.

               

              The only thing left is the RF ports. Mike! Got an example KISS port

              for 410D?? It's been years since I ran a kiss port as I had the DRSI all

              the time.

               

              Thanks,

               

              73 Dave

              n4zkf

              www.n4zkf.com

               

               

               


              From: BPQ32@yahoogroups. com [mailto:BPQ32@ yahoogroups. com] On Behalf Of Mike Melnik
              Sent: Saturday, March 15, 2008 12:57 PM
              To: BPQ32@yahoogroups. com
              Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

              Jeff

               

              After running WinFbb 7.01-35 also know as 7.01A for a couple of years I finally gave up and switched

              To WFBB 7.00E 32 Bit with BPQ32U latest Version 410D, to many BUGS in 7.01A.

               I also use Telpac for Winlink connections, AGWPE isn’t needed as the BPQ32U has an AGWtoBPQ look a like

               for programs needing AGWPE but if you want, AGWPE can be used with BPQ32U, for me AGWPE is just one

              less program I don’t need running.

               

              One problem with all of the 16 Bit WFBB 7.00E, G and I is the processor usage is 100% where as the

              32 Bit 7.00E runs nicely at 6%, if you are running W2K or XP a couple of changes need to be made

              to make the Maintenance (Housekeeping) program to work.

               

              As to a list of active BBS’S yes you are right it is hard to find, I will be more then happy to help you out

              With all needed Programs and Files for BPQ and WFBB.

               

              BTW most Winlink Uses/Nodes are switching from TELPAC to ether Packlink or RMS BETA.

               

              Mike Melnik
              N9PMO
              E-Mails Scanned By Symantec Corporate A/V
               
               

              -----Original Message-----
              From: BPQ32@yahoogroups. com [mailto:BPQ32@ yahoogroups. com] On Behalf Of Jeff
              Sent: Saturday, March 15, 2008 11:32 AM
              To: BPQ32@yahoogroups. com
              Subject: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

               

              Hey guys/gals,

              I'm seriously contemplating a new PBBS for my area here in Northern
              Kentucky and have a few questions maybe this group can help answer for me.

              Is there a good list of current PBBS's out there for the USA? I've
              looked around some on the net, but I haven't really found a one-stop
              listing. I find some single state lists and most of them are really
              old lists.

              I've lightly perused over some of the documents out there, BTW the
              best are found here on this group. I gather there are some bugs in
              FBB when used with BPQ32? Just curious what these are in brief?

              Anyone on the list willing to give me some do's, dont's, and things to
              watch out for with BPQ32 and WinFBB?

              Latest version of WinFBB (which looks to be 7.00i) good to use, or is
              one of the prior versions better? Sometimes the latest and greatest
              isn't always the greatest ;-)

              I gather the Win32 WinFBB is pretty much Alpha software and the Win16
              stuff is much more stable?

              Can I, or better stated, has anyone ran WinFBB and BPQ32 alongside
              WinLink on the same TNC/Radio? AGW the route to go for this if it's
              possible? Would kind of like to offer a WinLink telpac station for
              the area, but maximize existing equipment if possible.

              I'd probably have to go with a VHF/UHF local port and forward via the
              internet. Pros and cons of this? How would I go about, or who do I
              contact, for forwarding arrangements and so forth?

              Thanks in advance for your patience with my questions!

              73
              Jeff
              WA4ZKO

            • Mike Melnik
              Dave some times BPQ.EXE or AGWtoBPQ.EXE stays running but no Icon in the tool try, check by Running the Task Manager. BTY on my BPQ the first two ports is an
              Message 6 of 21 , Mar 15, 2008
              • 0 Attachment

                Dave some times BPQ.EXE or AGWtoBPQ.EXE stays running but no Icon in the tool try, check by

                Running the Task Manager.

                 

                BTY on my BPQ the first two ports is an Kantronics 9612

                 

                Mike Melnik
                N9PMO
                E-Mails Scanned By Symantec Corporate A/V
                 
                 

                -----Original Message-----
                From:
                BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of David Calder
                Sent: Saturday, March 15, 2008 6:04 PM
                To:
                BPQ32@yahoogroups.com
                Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

                 

                OK, I added the new KISS port to bpqcfg.txt. re-ran bpqconfig. It still shows

                the old port. Have I been at this too long today? What an I missing?

                 

                 


                From: BPQ32@yahoogroups. com [mailto:BPQ32@ yahoogroups. com] On Behalf Of Mike Melnik
                Sent: Saturday, March 15, 2008 4:20 PM
                To: BPQ32@yahoogroups. com
                Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

                Dave N4ZKF

                 

                K4GBB needs to check his V Statement in your forwarding block, he is probably missing the

                Period Example:   V .N9PMO$WPassWord$ W

                 

                The Period stops the echo and starts the Handshaking upon connection.

                 

                I will send you the Kiss stuff to your E-Mail Address.

                 

                Mike Melnik
                N9PMO
                E-Mails Scanned By Symantec Corporate A/V
                 
                 

                -----Original Message-----
                From: BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com] On Behalf Of David Calder
                Sent: Saturday, March 15, 2008 2:35 PM
                To: BPQ32@yahoogroups. com
                Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

                 

                Well. It's up and running just fine. I have one forward protocol error with one

                BBS and the rest work fine. I would say it's not me. BPQ 410D is sweet

                and working with FBB. The telnet port is working just fine.

                 

                This is also running on a machine with my CC Cluster AND AR Cluster

                DX nodes! They all are playing nicely together.

                 

                The only thing left is the RF ports. Mike! Got an example KISS port

                for 410D?? It's been years since I ran a kiss port as I had the DRSI all

                the time.

                 

                Thanks,

                 

                73 Dave

                n4zkf

                www.n4zkf.com

                 

                 

                 


                From: BPQ32@yahoogroups. com [mailto:BPQ32@ yahoogroups. com] On Behalf Of Mike Melnik
                Sent: Saturday, March 15, 2008 12:57 PM
                To: BPQ32@yahoogroups. com
                Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

                Jeff

                 

                After running WinFbb 7.01-35 also know as 7.01A for a couple of years I finally gave up and switched

                To WFBB 7.00E 32 Bit with BPQ32U latest Version 410D, to many BUGS in 7.01A.

                 I also use Telpac for Winlink connections, AGWPE isn’t needed as the BPQ32U has an AGWtoBPQ look a like

                 for programs needing AGWPE but if you want, AGWPE can be used with BPQ32U, for me AGWPE is just one

                less program I don’t need running.

                 

                One problem with all of the 16 Bit WFBB 7.00E, G and I is the processor usage is 100% where as the

                32 Bit 7.00E runs nicely at 6%, if you are running W2K or XP a couple of changes need to be made

                to make the Maintenance (Housekeeping) program to work.

                 

                As to a list of active BBS’S yes you are right it is hard to find, I will be more then happy to help you out

                With all needed Programs and Files for BPQ and WFBB.

                 

                BTW most Winlink Uses/Nodes are switching from TELPAC to ether Packlink or RMS BETA.

                 

                Mike Melnik
                N9PMO
                E-Mails Scanned By Symantec Corporate A/V
                 
                 

                -----Original Message-----
                From: BPQ32@yahoogroups. com [mailto:BPQ32@ yahoogroups. com] On Behalf Of Jeff
                Sent: Saturday, March 15, 2008 11:32 AM
                To: BPQ32@yahoogroups. com
                Subject: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

                 

                Hey guys/gals,

                I'm seriously contemplating a new PBBS for my area here in Northern
                Kentucky and have a few questions maybe this group can help answer for me.

                Is there a good list of current PBBS's out there for the USA? I've
                looked around some on the net, but I haven't really found a one-stop
                listing. I find some single state lists and most of them are really
                old lists.

                I've lightly perused over some of the documents out there, BTW the
                best are found here on this group. I gather there are some bugs in
                FBB when used with BPQ32? Just curious what these are in brief?

                Anyone on the list willing to give me some do's, dont's, and things to
                watch out for with BPQ32 and WinFBB?

                Latest version of WinFBB (which looks to be 7.00i) good to use, or is
                one of the prior versions better? Sometimes the latest and greatest
                isn't always the greatest ;-)

                I gather the Win32 WinFBB is pretty much Alpha software and the Win16
                stuff is much more stable?

                Can I, or better stated, has anyone ran WinFBB and BPQ32 alongside
                WinLink on the same TNC/Radio? AGW the route to go for this if it's
                possible? Would kind of like to offer a WinLink telpac station for
                the area, but maximize existing equipment if possible.

                I'd probably have to go with a VHF/UHF local port and forward via the
                internet. Pros and cons of this? How would I go about, or who do I
                contact, for forwarding arrangements and so forth?

                Thanks in advance for your patience with my questions!

                73
                Jeff
                WA4ZKO

              • K.O. Higgs
                I have had to shut down bpq and re-start it to get bpqcfg.bin loaded. 73, K.O. ... -- K.O. Higgs n0kfq@centurytel.net
                Message 7 of 21 , Mar 15, 2008
                • 0 Attachment
                  I have had to shut down bpq and re-start it to get bpqcfg.bin loaded.

                  73, K.O.

                  David Calder wrote:
                  >
                  > OK, I added the new KISS port to bpqcfg.txt. re-ran bpqconfig. It
                  > still shows
                  > the old port. Have I been at this too long today? What an I missing?
                  >
                  > ------------------------------------------------------------------------
                  > *From:* BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] *On
                  > Behalf Of *Mike Melnik
                  > *Sent:* Saturday, March 15, 2008 4:20 PM
                  > *To:* BPQ32@yahoogroups.com
                  > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                  > area.
                  >
                  > /Dave N4ZKF/
                  >
                  > //
                  >
                  > /K4GBB needs to check his V Statement in your forwarding block, he
                  > is probably missing the/
                  >
                  > /Period Example: V .N9PMO$WPassWord$W/
                  >
                  > //
                  >
                  > /The Period stops the echo and starts the Handshaking upon
                  > connection./
                  >
                  > //
                  >
                  > /I will send you the Kiss stuff to your E-Mail Address. /
                  >
                  > //
                  >
                  > Mike Melnik
                  > N9PMO
                  > E-Mails Scanned By Symantec Corporate A/V
                  >
                  > -----Original Message-----
                  > *From:* BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] *On
                  > Behalf Of *David Calder
                  > *Sent:* Saturday, March 15, 2008 2:35 PM
                  > *To:* BPQ32@yahoogroups.com
                  > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                  > area.
                  >
                  > Well. It's up and running just fine. I have one forward protocol
                  > error with one
                  >
                  > BBS and the rest work fine. I would say it's not me. BPQ 410D is sweet
                  >
                  > and working with FBB. The telnet port is working just fine.
                  >
                  > This is also running on a machine with my CC Cluster AND AR Cluster
                  >
                  > DX nodes! They all are playing nicely together.
                  >
                  > The only thing left is the RF ports. Mike! Got an example KISS port
                  >
                  > for 410D?? It's been years since I ran a kiss port as I had the
                  > DRSI all
                  >
                  > the time.
                  >
                  > Thanks,
                  >
                  > 73 Dave
                  >
                  > n4zkf
                  >
                  > www.n4zkf.com <http://www.n4zkf.com>
                  >
                  > ------------------------------------------------------------------------
                  >
                  > *From:* BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com]
                  > *On Behalf Of *Mike Melnik
                  > *Sent:* Saturday, March 15, 2008 12:57 PM
                  > *To:* BPQ32@yahoogroups.com
                  > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup
                  > for my area.
                  >
                  > /Jeff/
                  >
                  > /After running WinFbb 7.01-35 also know as 7.01A for a couple
                  > of years I finally gave up and switched/
                  >
                  > /To WFBB 7.00E 32 Bit with BPQ32U latest Version 410D, to many
                  > BUGS in 7.01A./
                  >
                  > / I also use Telpac for Winlink connections, AGWPE isn’t
                  > needed as the BPQ32U has an AGWtoBPQ look a like/
                  >
                  > / for programs needing AGWPE but if you want, AGWPE can be
                  > used with BPQ32U, for me AGWPE is just one/
                  >
                  > /less program I don’t need running./
                  >
                  > /One problem with all of the 16 Bit WFBB 7.00E, G and I is the
                  > processor usage is 100% where as the /
                  >
                  > /32 Bit 7.00E runs nicely at 6%, if you are running W2K or XP
                  > a couple of changes need to be made/
                  >
                  > /to make the Maintenance (Housekeeping) program to work./
                  >
                  > /As to a list of active BBS’S yes you are right it is hard to
                  > find, I will be more then happy to help you out/
                  >
                  > /With all needed Programs and Files for BPQ and WFBB./
                  >
                  > /BTW most Winlink Uses/Nodes are switching from TELPAC to
                  > ether Packlink or RMS BETA./
                  >
                  > Mike Melnik
                  > N9PMO
                  > E-Mails Scanned By Symantec Corporate A/V
                  >
                  > -----Original Message-----
                  > *From:* BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com]
                  > *On Behalf Of *Jeff
                  > *Sent:* Saturday, March 15, 2008 11:32 AM
                  > *To:* BPQ32@yahoogroups.com
                  > *Subject:* [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                  > area.
                  >
                  > Hey guys/gals,
                  >
                  > I'm seriously contemplating a new PBBS for my area here in
                  > Northern
                  > Kentucky and have a few questions maybe this group can help
                  > answer for me.
                  >
                  > Is there a good list of current PBBS's out there for the USA? I've
                  > looked around some on the net, but I haven't really found a
                  > one-stop
                  > listing. I find some single state lists and most of them are
                  > really
                  > old lists.
                  >
                  > I've lightly perused over some of the documents out there, BTW the
                  > best are found here on this group. I gather there are some bugs in
                  > FBB when used with BPQ32? Just curious what these are in brief?
                  >
                  > Anyone on the list willing to give me some do's, dont's, and
                  > things to
                  > watch out for with BPQ32 and WinFBB?
                  >
                  > Latest version of WinFBB (which looks to be 7.00i) good to
                  > use, or is
                  > one of the prior versions better? Sometimes the latest and
                  > greatest
                  > isn't always the greatest ;-)
                  >
                  > I gather the Win32 WinFBB is pretty much Alpha software and
                  > the Win16
                  > stuff is much more stable?
                  >
                  > Can I, or better stated, has anyone ran WinFBB and BPQ32 alongside
                  > WinLink on the same TNC/Radio? AGW the route to go for this if
                  > it's
                  > possible? Would kind of like to offer a WinLink telpac station for
                  > the area, but maximize existing equipment if possible.
                  >
                  > I'd probably have to go with a VHF/UHF local port and forward
                  > via the
                  > internet. Pros and cons of this? How would I go about, or who do I
                  > contact, for forwarding arrangements and so forth?
                  >
                  > Thanks in advance for your patience with my questions!
                  >
                  > 73
                  > Jeff
                  > WA4ZKO
                  >
                  >

                  --

                  K.O. Higgs
                  n0kfq@...
                • David Calder
                  It s still in the task bar. How do I shut it down? Re-booting is not an option as there is two DX Cluster nodes on this machine. What s the name of the
                  Message 8 of 21 , Mar 15, 2008
                  • 0 Attachment
                    It's still in the task bar. How do I shut it down? Re-booting is not
                    an option as there is two DX Cluster nodes on this machine.

                    What's the name of the process? Anyone know? I'll end it.

                    Thanks for the fast response guys. This is great...


                    -----Original Message-----
                    From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of K.O.
                    Higgs
                    Sent: Saturday, March 15, 2008 7:09 PM
                    To: BPQ32@yahoogroups.com
                    Subject: Re: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

                    I have had to shut down bpq and re-start it to get bpqcfg.bin loaded.

                    73, K.O.

                    David Calder wrote:
                    >
                    > OK, I added the new KISS port to bpqcfg.txt. re-ran bpqconfig. It
                    > still shows the old port. Have I been at this too long today? What an
                    > I missing?
                    >
                    >
                    ------------------------------------------------------------------------
                    > *From:* BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] *On
                    > Behalf Of *Mike Melnik
                    > *Sent:* Saturday, March 15, 2008 4:20 PM
                    > *To:* BPQ32@yahoogroups.com
                    > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                    > area.
                    >
                    > /Dave N4ZKF/
                    >
                    > //
                    >
                    > /K4GBB needs to check his V Statement in your forwarding block, he
                    > is probably missing the/
                    >
                    > /Period Example: V .N9PMO$WPassWord$W/
                    >
                    > //
                    >
                    > /The Period stops the echo and starts the Handshaking upon
                    > connection./
                    >
                    > //
                    >
                    > /I will send you the Kiss stuff to your E-Mail Address. /
                    >
                    > //
                    >
                    > Mike Melnik
                    > N9PMO
                    > E-Mails Scanned By Symantec Corporate A/V
                    >
                    > -----Original Message-----
                    > *From:* BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] *On
                    > Behalf Of *David Calder
                    > *Sent:* Saturday, March 15, 2008 2:35 PM
                    > *To:* BPQ32@yahoogroups.com
                    > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                    > area.
                    >
                    > Well. It's up and running just fine. I have one forward protocol
                    > error with one
                    >
                    > BBS and the rest work fine. I would say it's not me. BPQ 410D is
                    > sweet
                    >
                    > and working with FBB. The telnet port is working just fine.
                    >
                    > This is also running on a machine with my CC Cluster AND AR
                    > Cluster
                    >
                    > DX nodes! They all are playing nicely together.
                    >
                    > The only thing left is the RF ports. Mike! Got an example KISS
                    > port
                    >
                    > for 410D?? It's been years since I ran a kiss port as I had the
                    > DRSI all
                    >
                    > the time.
                    >
                    > Thanks,
                    >
                    > 73 Dave
                    >
                    > n4zkf
                    >
                    > www.n4zkf.com <http://www.n4zkf.com>
                    >
                    >
                    > ----------------------------------------------------------------------
                    > --
                    >
                    > *From:* BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com]
                    > *On Behalf Of *Mike Melnik
                    > *Sent:* Saturday, March 15, 2008 12:57 PM
                    > *To:* BPQ32@yahoogroups.com
                    > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup
                    > for my area.
                    >
                    > /Jeff/
                    >
                    > /After running WinFbb 7.01-35 also know as 7.01A for a couple
                    > of years I finally gave up and switched/
                    >
                    > /To WFBB 7.00E 32 Bit with BPQ32U latest Version 410D, to many
                    > BUGS in 7.01A./
                    >
                    > / I also use Telpac for Winlink connections, AGWPE isn't
                    > needed as the BPQ32U has an AGWtoBPQ look a like/
                    >
                    > / for programs needing AGWPE but if you want, AGWPE can be
                    > used with BPQ32U, for me AGWPE is just one/
                    >
                    > /less program I don't need running./
                    >
                    > /One problem with all of the 16 Bit WFBB 7.00E, G and I is the
                    > processor usage is 100% where as the /
                    >
                    > /32 Bit 7.00E runs nicely at 6%, if you are running W2K or XP
                    > a couple of changes need to be made/
                    >
                    > /to make the Maintenance (Housekeeping) program to work./
                    >
                    > /As to a list of active BBS'S yes you are right it is hard to
                    > find, I will be more then happy to help you out/
                    >
                    > /With all needed Programs and Files for BPQ and WFBB./
                    >
                    > /BTW most Winlink Uses/Nodes are switching from TELPAC to
                    > ether Packlink or RMS BETA./
                    >
                    > Mike Melnik
                    > N9PMO
                    > E-Mails Scanned By Symantec Corporate A/V
                    >
                    > -----Original Message-----
                    > *From:* BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com]
                    > *On Behalf Of *Jeff
                    > *Sent:* Saturday, March 15, 2008 11:32 AM
                    > *To:* BPQ32@yahoogroups.com
                    > *Subject:* [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                    > area.
                    >
                    > Hey guys/gals,
                    >
                    > I'm seriously contemplating a new PBBS for my area here in
                    > Northern
                    > Kentucky and have a few questions maybe this group can help
                    > answer for me.
                    >
                    > Is there a good list of current PBBS's out there for the USA? I've
                    > looked around some on the net, but I haven't really found a
                    > one-stop
                    > listing. I find some single state lists and most of them are
                    > really
                    > old lists.
                    >
                    > I've lightly perused over some of the documents out there, BTW the
                    > best are found here on this group. I gather there are some bugs in
                    > FBB when used with BPQ32? Just curious what these are in brief?
                    >
                    > Anyone on the list willing to give me some do's, dont's, and
                    > things to
                    > watch out for with BPQ32 and WinFBB?
                    >
                    > Latest version of WinFBB (which looks to be 7.00i) good to
                    > use, or is
                    > one of the prior versions better? Sometimes the latest and
                    > greatest
                    > isn't always the greatest ;-)
                    >
                    > I gather the Win32 WinFBB is pretty much Alpha software and
                    > the Win16
                    > stuff is much more stable?
                    >
                    > Can I, or better stated, has anyone ran WinFBB and BPQ32 alongside
                    > WinLink on the same TNC/Radio? AGW the route to go for this if
                    > it's
                    > possible? Would kind of like to offer a WinLink telpac station for
                    > the area, but maximize existing equipment if possible.
                    >
                    > I'd probably have to go with a VHF/UHF local port and forward
                    > via the
                    > internet. Pros and cons of this? How would I go about, or who do I
                    > contact, for forwarding arrangements and so forth?
                    >
                    > Thanks in advance for your patience with my questions!
                    >
                    > 73
                    > Jeff
                    > WA4ZKO
                    >
                    >

                    --

                    K.O. Higgs
                    n0kfq@...



                    ------------------------------------

                    Yahoo! Groups Links
                  • K.O. Higgs
                    To shut down bpq, I exit fbb then right click on the bpq icon, select bpq.exe, click on the red X. K.O. ... -- K.O. Higgs n0kfq@centurytel.net
                    Message 9 of 21 , Mar 15, 2008
                    • 0 Attachment
                      To shut down bpq, I exit fbb then right click on the bpq icon, select
                      bpq.exe, click on
                      the red X.

                      K.O.

                      David Calder wrote:
                      >
                      >
                      > It's still in the task bar. How do I shut it down? Re-booting is not
                      > an option as there is two DX Cluster nodes on this machine.
                      >
                      > What's the name of the process? Anyone know? I'll end it.
                      >
                      > Thanks for the fast response guys. This is great...
                      >
                      >
                      > -----Original Message-----
                      > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                      > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>] On
                      > Behalf Of K.O.
                      > Higgs
                      > Sent: Saturday, March 15, 2008 7:09 PM
                      > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                      > Subject: Re: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.
                      >
                      > I have had to shut down bpq and re-start it to get bpqcfg.bin loaded.
                      >
                      > 73, K.O.
                      >
                      > David Calder wrote:
                      > >
                      > > OK, I added the new KISS port to bpqcfg.txt. re-ran bpqconfig. It
                      > > still shows the old port. Have I been at this too long today? What an
                      > > I missing?
                      > >
                      > >
                      > ----------------------------------------------------------
                      > > *From:* BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                      > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>] *On
                      > > Behalf Of *Mike Melnik
                      > > *Sent:* Saturday, March 15, 2008 4:20 PM
                      > > *To:* BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                      > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                      > > area.
                      > >
                      > > /Dave N4ZKF/
                      > >
                      > > //
                      > >
                      > > /K4GBB needs to check his V Statement in your forwarding block, he
                      > > is probably missing the/
                      > >
                      > > /Period Example: V .N9PMO$WPassWord$W/
                      > >
                      > > //
                      > >
                      > > /The Period stops the echo and starts the Handshaking upon
                      > > connection./
                      > >
                      > > //
                      > >
                      > > /I will send you the Kiss stuff to your E-Mail Address. /
                      > >
                      > > //
                      > >
                      > > Mike Melnik
                      > > N9PMO
                      > > E-Mails Scanned By Symantec Corporate A/V
                      > >
                      > > -----Original Message-----
                      > > *From:* BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                      > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>] *On
                      > > Behalf Of *David Calder
                      > > *Sent:* Saturday, March 15, 2008 2:35 PM
                      > > *To:* BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                      > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                      > > area.
                      > >
                      > > Well. It's up and running just fine. I have one forward protocol
                      > > error with one
                      > >
                      > > BBS and the rest work fine. I would say it's not me. BPQ 410D is
                      > > sweet
                      > >
                      > > and working with FBB. The telnet port is working just fine.
                      > >
                      > > This is also running on a machine with my CC Cluster AND AR
                      > > Cluster
                      > >
                      > > DX nodes! They all are playing nicely together.
                      > >
                      > > The only thing left is the RF ports. Mike! Got an example KISS
                      > > port
                      > >
                      > > for 410D?? It's been years since I ran a kiss port as I had the
                      > > DRSI all
                      > >
                      > > the time.
                      > >
                      > > Thanks,
                      > >
                      > > 73 Dave
                      > >
                      > > n4zkf
                      > >
                      > > www.n4zkf.com <http://www.n4zkf.com <http://www.n4zkf.com>>
                      > >
                      > >
                      > > ----------------------------------------------------------
                      > > --
                      > >
                      > > *From:* BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                      > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>]
                      > > *On Behalf Of *Mike Melnik
                      > > *Sent:* Saturday, March 15, 2008 12:57 PM
                      > > *To:* BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                      > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup
                      > > for my area.
                      > >
                      > > /Jeff/
                      > >
                      > > /After running WinFbb 7.01-35 also know as 7.01A for a couple
                      > > of years I finally gave up and switched/
                      > >
                      > > /To WFBB 7.00E 32 Bit with BPQ32U latest Version 410D, to many
                      > > BUGS in 7.01A./
                      > >
                      > > / I also use Telpac for Winlink connections, AGWPE isn't
                      > > needed as the BPQ32U has an AGWtoBPQ look a like/
                      > >
                      > > / for programs needing AGWPE but if you want, AGWPE can be
                      > > used with BPQ32U, for me AGWPE is just one/
                      > >
                      > > /less program I don't need running./
                      > >
                      > > /One problem with all of the 16 Bit WFBB 7.00E, G and I is the
                      > > processor usage is 100% where as the /
                      > >
                      > > /32 Bit 7.00E runs nicely at 6%, if you are running W2K or XP
                      > > a couple of changes need to be made/
                      > >
                      > > /to make the Maintenance (Housekeeping) program to work./
                      > >
                      > > /As to a list of active BBS'S yes you are right it is hard to
                      > > find, I will be more then happy to help you out/
                      > >
                      > > /With all needed Programs and Files for BPQ and WFBB./
                      > >
                      > > /BTW most Winlink Uses/Nodes are switching from TELPAC to
                      > > ether Packlink or RMS BETA./
                      > >
                      > > Mike Melnik
                      > > N9PMO
                      > > E-Mails Scanned By Symantec Corporate A/V
                      > >
                      > > -----Original Message-----
                      > > *From:* BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                      > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>]
                      > > *On Behalf Of *Jeff
                      > > *Sent:* Saturday, March 15, 2008 11:32 AM
                      > > *To:* BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                      > > *Subject:* [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                      > > area.
                      > >
                      > > Hey guys/gals,
                      > >
                      > > I'm seriously contemplating a new PBBS for my area here in
                      > > Northern
                      > > Kentucky and have a few questions maybe this group can help
                      > > answer for me.
                      > >
                      > > Is there a good list of current PBBS's out there for the USA? I've
                      > > looked around some on the net, but I haven't really found a
                      > > one-stop
                      > > listing. I find some single state lists and most of them are
                      > > really
                      > > old lists.
                      > >
                      > > I've lightly perused over some of the documents out there, BTW the
                      > > best are found here on this group. I gather there are some bugs in
                      > > FBB when used with BPQ32? Just curious what these are in brief?
                      > >
                      > > Anyone on the list willing to give me some do's, dont's, and
                      > > things to
                      > > watch out for with BPQ32 and WinFBB?
                      > >
                      > > Latest version of WinFBB (which looks to be 7.00i) good to
                      > > use, or is
                      > > one of the prior versions better? Sometimes the latest and
                      > > greatest
                      > > isn't always the greatest ;-)
                      > >
                      > > I gather the Win32 WinFBB is pretty much Alpha software and
                      > > the Win16
                      > > stuff is much more stable?
                      > >
                      > > Can I, or better stated, has anyone ran WinFBB and BPQ32 alongside
                      > > WinLink on the same TNC/Radio? AGW the route to go for this if
                      > > it's
                      > > possible? Would kind of like to offer a WinLink telpac station for
                      > > the area, but maximize existing equipment if possible.
                      > >
                      > > I'd probably have to go with a VHF/UHF local port and forward
                      > > via the
                      > > internet. Pros and cons of this? How would I go about, or who do I
                      > > contact, for forwarding arrangements and so forth?
                      > >
                      > > Thanks in advance for your patience with my questions!
                      > >
                      > > 73
                      > > Jeff
                      > > WA4ZKO
                      > >
                      > >
                      >
                      > --
                      >
                      > K.O. Higgs
                      > n0kfq@... <mailto:n0kfq%40centurytel.net>
                      >
                      > ------------------------------------
                      >
                      > Yahoo! Groups Links
                      >
                      >

                      --

                      K.O. Higgs
                      n0kfq@...
                    • David Calder
                      I closed FBB and it shut it down for me.!! LOL Thanks. Who would of thunk it. I need to get out of the old 16 bit thinking. We ll lets see if this works. _____
                      Message 10 of 21 , Mar 15, 2008
                      • 0 Attachment
                        I closed FBB and it shut it down for me.!! LOL
                         
                        Thanks. Who would of thunk it. I need to get out of the old 16 bit
                        thinking.
                         
                        We'll lets see if this works.
                         


                        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of K.O. Higgs
                        Sent: Saturday, March 15, 2008 7:22 PM
                        To: BPQ32@yahoogroups.com
                        Subject: Re: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

                        To shut down bpq, I exit fbb then right click on the bpq icon, select
                        bpq.exe, click on
                        the red X.

                        K.O.

                        David Calder wrote:
                        >
                        >
                        > It's still in the task bar. How do I shut it down? Re-booting is not
                        > an option as there is two DX Cluster nodes on this machine.
                        >
                        > What's the name of the process? Anyone know? I'll end it.
                        >
                        > Thanks for the fast response guys. This is great...
                        >
                        >
                        > -----Original Message-----
                        > From: BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                        > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>] On
                        > Behalf Of K.O.
                        > Higgs
                        > Sent: Saturday, March 15, 2008 7:09 PM
                        > To: BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                        > Subject: Re: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.
                        >
                        > I have had to shut down bpq and re-start it to get bpqcfg.bin loaded.
                        >
                        > 73, K.O.
                        >
                        > David Calder wrote:
                        > >
                        > > OK, I added the new KISS port to bpqcfg.txt. re-ran bpqconfig. It
                        > > still shows the old port. Have I been at this too long today? What an
                        > > I missing?
                        > >
                        > >
                        > ------------ --------- --------- --------- --------- --------- -
                        > > *From:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                        > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>] *On
                        > > Behalf Of *Mike Melnik
                        > > *Sent:* Saturday, March 15, 2008 4:20 PM
                        > > *To:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                        > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                        > > area.
                        > >
                        > > /Dave N4ZKF/
                        > >
                        > > //
                        > >
                        > > /K4GBB needs to check his V Statement in your forwarding block, he
                        > > is probably missing the/
                        > >
                        > > /Period Example: V .N9PMO$WPassWord$ W/
                        > >
                        > > //
                        > >
                        > > /The Period stops the echo and starts the Handshaking upon
                        > > connection./
                        > >
                        > > //
                        > >
                        > > /I will send you the Kiss stuff to your E-Mail Address. /
                        > >
                        > > //
                        > >
                        > > Mike Melnik
                        > > N9PMO
                        > > E-Mails Scanned By Symantec Corporate A/V
                        > >
                        > > -----Original Message-----
                        > > *From:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                        > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>] *On
                        > > Behalf Of *David Calder
                        > > *Sent:* Saturday, March 15, 2008 2:35 PM
                        > > *To:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                        > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                        > > area.
                        > >
                        > > Well. It's up and running just fine. I have one forward protocol
                        > > error with one
                        > >
                        > > BBS and the rest work fine. I would say it's not me. BPQ 410D is
                        > > sweet
                        > >
                        > > and working with FBB. The telnet port is working just fine.
                        > >
                        > > This is also running on a machine with my CC Cluster AND AR
                        > > Cluster
                        > >
                        > > DX nodes! They all are playing nicely together.
                        > >
                        > > The only thing left is the RF ports. Mike! Got an example KISS
                        > > port
                        > >
                        > > for 410D?? It's been years since I ran a kiss port as I had the
                        > > DRSI all
                        > >
                        > > the time.
                        > >
                        > > Thanks,
                        > >
                        > > 73 Dave
                        > >
                        > > n4zkf
                        > >
                        > > www.n4zkf.com <http://www.n4zkf. com <http://www.n4zkf. com>>
                        > >
                        > >
                        > > ------------ --------- --------- --------- --------- --------- -
                        > > --
                        > >
                        > > *From:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                        > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>]
                        > > *On Behalf Of *Mike Melnik
                        > > *Sent:* Saturday, March 15, 2008 12:57 PM
                        > > *To:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                        > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup
                        > > for my area.
                        > >
                        > > /Jeff/
                        > >
                        > > /After running WinFbb 7.01-35 also know as 7.01A for a couple
                        > > of years I finally gave up and switched/
                        > >
                        > > /To WFBB 7.00E 32 Bit with BPQ32U latest Version 410D, to many
                        > > BUGS in 7.01A./
                        > >
                        > > / I also use Telpac for Winlink connections, AGWPE isn't
                        > > needed as the BPQ32U has an AGWtoBPQ look a like/
                        > >
                        > > / for programs needing AGWPE but if you want, AGWPE can be
                        > > used with BPQ32U, for me AGWPE is just one/
                        > >
                        > > /less program I don't need running./
                        > >
                        > > /One problem with all of the 16 Bit WFBB 7.00E, G and I is the
                        > > processor usage is 100% where as the /
                        > >
                        > > /32 Bit 7.00E runs nicely at 6%, if you are running W2K or XP
                        > > a couple of changes need to be made/
                        > >
                        > > /to make the Maintenance (Housekeeping) program to work./
                        > >
                        > > /As to a list of active BBS'S yes you are right it is hard to
                        > > find, I will be more then happy to help you out/
                        > >
                        > > /With all needed Programs and Files for BPQ and WFBB./
                        > >
                        > > /BTW most Winlink Uses/Nodes are switching from TELPAC to
                        > > ether Packlink or RMS BETA./
                        > >
                        > > Mike Melnik
                        > > N9PMO
                        > > E-Mails Scanned By Symantec Corporate A/V
                        > >
                        > > -----Original Message-----
                        > > *From:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                        > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>]
                        > > *On Behalf Of *Jeff
                        > > *Sent:* Saturday, March 15, 2008 11:32 AM
                        > > *To:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                        > > *Subject:* [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                        > > area.
                        > >
                        > > Hey guys/gals,
                        > >
                        > > I'm seriously contemplating a new PBBS for my area here in
                        > > Northern
                        > > Kentucky and have a few questions maybe this group can help
                        > > answer for me.
                        > >
                        > > Is there a good list of current PBBS's out there for the USA? I've
                        > > looked around some on the net, but I haven't really found a
                        > > one-stop
                        > > listing. I find some single state lists and most of them are
                        > > really
                        > > old lists.
                        > >
                        > > I've lightly perused over some of the documents out there, BTW the
                        > > best are found here on this group. I gather there are some bugs in
                        > > FBB when used with BPQ32? Just curious what these are in brief?
                        > >
                        > > Anyone on the list willing to give me some do's, dont's, and
                        > > things to
                        > > watch out for with BPQ32 and WinFBB?
                        > >
                        > > Latest version of WinFBB (which looks to be 7.00i) good to
                        > > use, or is
                        > > one of the prior versions better? Sometimes the latest and
                        > > greatest
                        > > isn't always the greatest ;-)
                        > >
                        > > I gather the Win32 WinFBB is pretty much Alpha software and
                        > > the Win16
                        > > stuff is much more stable?
                        > >
                        > > Can I, or better stated, has anyone ran WinFBB and BPQ32 alongside
                        > > WinLink on the same TNC/Radio? AGW the route to go for this if
                        > > it's
                        > > possible? Would kind of like to offer a WinLink telpac station for
                        > > the area, but maximize existing equipment if possible.
                        > >
                        > > I'd probably have to go with a VHF/UHF local port and forward
                        > > via the
                        > > internet. Pros and cons of this? How would I go about, or who do I
                        > > contact, for forwarding arrangements and so forth?
                        > >
                        > > Thanks in advance for your patience with my questions!
                        > >
                        > > 73
                        > > Jeff
                        > > WA4ZKO
                        > >
                        > >
                        >
                        > --
                        >
                        > K.O. Higgs
                        > n0kfq@centurytel. net <mailto:n0kfq% 40centurytel. net>
                        >
                        > ------------ --------- --------- ------
                        >
                        > Yahoo! Groups Links
                        >
                        >

                        --

                        K.O. Higgs
                        n0kfq@centurytel. net

                      • David Calder
                        Wallah!!! 20 Meter port up running a 1278B in KISS and also using a USB to serial adapter! I have got to re-wire the cable to the Yaesu FT-840 I used though.
                        Message 11 of 21 , Mar 15, 2008
                        • 0 Attachment
                          Wallah!!! 20 Meter port up running a 1278B in KISS and also using
                          a USB to serial adapter! I have got to re-wire the cable to the
                          Yaesu FT-840 I used though. Right now I have it on my FT-2000!
                           
                          Thanks all. Now to get the other port of it to work at the same time.
                           
                          Dave
                           


                          From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of K.O. Higgs
                          Sent: Saturday, March 15, 2008 7:22 PM
                          To: BPQ32@yahoogroups.com
                          Subject: Re: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

                          To shut down bpq, I exit fbb then right click on the bpq icon, select
                          bpq.exe, click on
                          the red X.

                          K.O.

                          David Calder wrote:
                          >
                          >
                          > It's still in the task bar. How do I shut it down? Re-booting is not
                          > an option as there is two DX Cluster nodes on this machine.
                          >
                          > What's the name of the process? Anyone know? I'll end it.
                          >
                          > Thanks for the fast response guys. This is great...
                          >
                          >
                          > -----Original Message-----
                          > From: BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                          > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>] On
                          > Behalf Of K.O.
                          > Higgs
                          > Sent: Saturday, March 15, 2008 7:09 PM
                          > To: BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                          > Subject: Re: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.
                          >
                          > I have had to shut down bpq and re-start it to get bpqcfg.bin loaded.
                          >
                          > 73, K.O.
                          >
                          > David Calder wrote:
                          > >
                          > > OK, I added the new KISS port to bpqcfg.txt. re-ran bpqconfig. It
                          > > still shows the old port. Have I been at this too long today? What an
                          > > I missing?
                          > >
                          > >
                          > ------------ --------- --------- --------- --------- --------- -
                          > > *From:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                          > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>] *On
                          > > Behalf Of *Mike Melnik
                          > > *Sent:* Saturday, March 15, 2008 4:20 PM
                          > > *To:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                          > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                          > > area.
                          > >
                          > > /Dave N4ZKF/
                          > >
                          > > //
                          > >
                          > > /K4GBB needs to check his V Statement in your forwarding block, he
                          > > is probably missing the/
                          > >
                          > > /Period Example: V .N9PMO$WPassWord$ W/
                          > >
                          > > //
                          > >
                          > > /The Period stops the echo and starts the Handshaking upon
                          > > connection./
                          > >
                          > > //
                          > >
                          > > /I will send you the Kiss stuff to your E-Mail Address. /
                          > >
                          > > //
                          > >
                          > > Mike Melnik
                          > > N9PMO
                          > > E-Mails Scanned By Symantec Corporate A/V
                          > >
                          > > -----Original Message-----
                          > > *From:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                          > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>] *On
                          > > Behalf Of *David Calder
                          > > *Sent:* Saturday, March 15, 2008 2:35 PM
                          > > *To:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                          > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                          > > area.
                          > >
                          > > Well. It's up and running just fine. I have one forward protocol
                          > > error with one
                          > >
                          > > BBS and the rest work fine. I would say it's not me. BPQ 410D is
                          > > sweet
                          > >
                          > > and working with FBB. The telnet port is working just fine.
                          > >
                          > > This is also running on a machine with my CC Cluster AND AR
                          > > Cluster
                          > >
                          > > DX nodes! They all are playing nicely together.
                          > >
                          > > The only thing left is the RF ports. Mike! Got an example KISS
                          > > port
                          > >
                          > > for 410D?? It's been years since I ran a kiss port as I had the
                          > > DRSI all
                          > >
                          > > the time.
                          > >
                          > > Thanks,
                          > >
                          > > 73 Dave
                          > >
                          > > n4zkf
                          > >
                          > > www.n4zkf.com <http://www.n4zkf. com <http://www.n4zkf. com>>
                          > >
                          > >
                          > > ------------ --------- --------- --------- --------- --------- -
                          > > --
                          > >
                          > > *From:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                          > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>]
                          > > *On Behalf Of *Mike Melnik
                          > > *Sent:* Saturday, March 15, 2008 12:57 PM
                          > > *To:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                          > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup
                          > > for my area.
                          > >
                          > > /Jeff/
                          > >
                          > > /After running WinFbb 7.01-35 also know as 7.01A for a couple
                          > > of years I finally gave up and switched/
                          > >
                          > > /To WFBB 7.00E 32 Bit with BPQ32U latest Version 410D, to many
                          > > BUGS in 7.01A./
                          > >
                          > > / I also use Telpac for Winlink connections, AGWPE isn't
                          > > needed as the BPQ32U has an AGWtoBPQ look a like/
                          > >
                          > > / for programs needing AGWPE but if you want, AGWPE can be
                          > > used with BPQ32U, for me AGWPE is just one/
                          > >
                          > > /less program I don't need running./
                          > >
                          > > /One problem with all of the 16 Bit WFBB 7.00E, G and I is the
                          > > processor usage is 100% where as the /
                          > >
                          > > /32 Bit 7.00E runs nicely at 6%, if you are running W2K or XP
                          > > a couple of changes need to be made/
                          > >
                          > > /to make the Maintenance (Housekeeping) program to work./
                          > >
                          > > /As to a list of active BBS'S yes you are right it is hard to
                          > > find, I will be more then happy to help you out/
                          > >
                          > > /With all needed Programs and Files for BPQ and WFBB./
                          > >
                          > > /BTW most Winlink Uses/Nodes are switching from TELPAC to
                          > > ether Packlink or RMS BETA./
                          > >
                          > > Mike Melnik
                          > > N9PMO
                          > > E-Mails Scanned By Symantec Corporate A/V
                          > >
                          > > -----Original Message-----
                          > > *From:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                          > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>]
                          > > *On Behalf Of *Jeff
                          > > *Sent:* Saturday, March 15, 2008 11:32 AM
                          > > *To:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                          > > *Subject:* [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                          > > area.
                          > >
                          > > Hey guys/gals,
                          > >
                          > > I'm seriously contemplating a new PBBS for my area here in
                          > > Northern
                          > > Kentucky and have a few questions maybe this group can help
                          > > answer for me.
                          > >
                          > > Is there a good list of current PBBS's out there for the USA? I've
                          > > looked around some on the net, but I haven't really found a
                          > > one-stop
                          > > listing. I find some single state lists and most of them are
                          > > really
                          > > old lists.
                          > >
                          > > I've lightly perused over some of the documents out there, BTW the
                          > > best are found here on this group. I gather there are some bugs in
                          > > FBB when used with BPQ32? Just curious what these are in brief?
                          > >
                          > > Anyone on the list willing to give me some do's, dont's, and
                          > > things to
                          > > watch out for with BPQ32 and WinFBB?
                          > >
                          > > Latest version of WinFBB (which looks to be 7.00i) good to
                          > > use, or is
                          > > one of the prior versions better? Sometimes the latest and
                          > > greatest
                          > > isn't always the greatest ;-)
                          > >
                          > > I gather the Win32 WinFBB is pretty much Alpha software and
                          > > the Win16
                          > > stuff is much more stable?
                          > >
                          > > Can I, or better stated, has anyone ran WinFBB and BPQ32 alongside
                          > > WinLink on the same TNC/Radio? AGW the route to go for this if
                          > > it's
                          > > possible? Would kind of like to offer a WinLink telpac station for
                          > > the area, but maximize existing equipment if possible.
                          > >
                          > > I'd probably have to go with a VHF/UHF local port and forward
                          > > via the
                          > > internet. Pros and cons of this? How would I go about, or who do I
                          > > contact, for forwarding arrangements and so forth?
                          > >
                          > > Thanks in advance for your patience with my questions!
                          > >
                          > > 73
                          > > Jeff
                          > > WA4ZKO
                          > >
                          > >
                          >
                          > --
                          >
                          > K.O. Higgs
                          > n0kfq@centurytel. net <mailto:n0kfq% 40centurytel. net>
                          >
                          > ------------ --------- --------- ------
                          >
                          > Yahoo! Groups Links
                          >
                          >

                          --

                          K.O. Higgs
                          n0kfq@centurytel. net

                        • Mike Melnik
                          Dave I will send you my port.sys I have only 1 BPQ Port allocated in WFBB to handle all the BPQ Ports If you need to vary the Pacl per port this can be done in
                          Message 12 of 21 , Mar 15, 2008
                          • 0 Attachment

                            Dave

                             

                            I will send you my port.sys I have only 1 BPQ Port allocated in WFBB to handle all the BPQ Ports

                            If you need to vary the Pacl per port this can be done in the BPQCFG.TXT just remember to run

                            The BPQCFG.EXE without BPQ/FBB running to compile the BPQCFG.TXT to the BIN.

                             

                            Mike Melnik
                            N9PMO
                            E-Mails Scanned By Symantec Corporate A/V
                             
                             

                            -----Original Message-----
                            From:
                            BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of David Calder
                            Sent: Saturday, March 15, 2008 6:41 PM
                            To:
                            BPQ32@yahoogroups.com
                            Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

                             

                            Wallah!!! 20 Meter port up running a 1278B in KISS and also using

                            a USB to serial adapter! I have got to re-wire the cable to the

                            Yaesu FT-840 I used though. Right now I have it on my FT-2000!

                             

                            Thanks all. Now to get the other port of it to work at the same time.

                             

                            Dave

                             

                             


                            From: BPQ32@yahoogroups. com [mailto:BPQ32@ yahoogroups. com] On Behalf Of K.O. Higgs
                            Sent: Saturday, March 15, 2008 7:22 PM
                            To: BPQ32@yahoogroups. com
                            Subject: Re: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

                            To shut down bpq, I exit fbb then right click on the bpq icon, select
                            bpq.exe, click on
                            the red X.

                            K.O.

                            David Calder wrote:
                            >
                            >
                            > It's still in the task bar. How do I shut it down? Re-booting is not
                            > an option as there is two DX Cluster nodes on this machine.
                            >
                            > What's the name of the process? Anyone know? I'll end it.
                            >
                            > Thanks for the fast response guys. This is great...
                            >
                            >
                            > -----Original Message-----
                            > From: BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                            > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>] On
                            > Behalf Of K.O.
                            > Higgs
                            > Sent: Saturday, March 15, 2008 7:09 PM
                            > To: BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                            > Subject: Re: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.
                            >
                            > I have had to shut down bpq and re-start it to get bpqcfg.bin loaded.
                            >
                            > 73, K.O.
                            >
                            > David Calder wrote:
                            > >
                            > > OK, I added the new KISS port to bpqcfg.txt. re-ran bpqconfig. It
                            > > still shows the old port. Have I been at this too long today? What an
                            > > I missing?
                            > >
                            > >
                            > ------------ --------- --------- --------- --------- --------- -
                            > > *From:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                            > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>] *On
                            > > Behalf Of *Mike Melnik
                            > > *Sent:* Saturday, March 15, 2008 4:20 PM
                            > > *To:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                            > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                            > > area.
                            > >
                            > > /Dave N4ZKF/
                            > >
                            > > //
                            > >
                            > > /K4GBB needs to check his V Statement in your forwarding block, he
                            > > is probably missing the/
                            > >
                            > > /Period Example: V .N9PMO$WPassWord$ W/
                            > >
                            > > //
                            > >
                            > > /The Period stops the echo and starts the Handshaking upon
                            > > connection./
                            > >
                            > > //
                            > >
                            > > /I will send you the Kiss stuff to your E-Mail Address. /
                            > >
                            > > //
                            > >
                            > > Mike Melnik
                            > > N9PMO
                            > > E-Mails Scanned By Symantec Corporate A/V
                            > >
                            > > -----Original Message-----
                            > > *From:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                            > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>] *On
                            > > Behalf Of *David Calder
                            > > *Sent:* Saturday, March 15, 2008 2:35 PM
                            > > *To:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                            > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                            > > area.
                            > >
                            > > Well. It's up and running just fine. I have one forward protocol
                            > > error with one
                            > >
                            > > BBS and the rest work fine. I would say it's not me. BPQ 410D is
                            > > sweet
                            > >
                            > > and working with FBB. The telnet port is working just fine.
                            > >
                            > > This is also running on a machine with my CC Cluster AND AR
                            > > Cluster
                            > >
                            > > DX nodes! They all are playing nicely together.
                            > >
                            > > The only thing left is the RF ports. Mike! Got an example KISS
                            > > port
                            > >
                            > > for 410D?? It's been years since I ran a kiss port as I had the
                            > > DRSI all
                            > >
                            > > the time.
                            > >
                            > > Thanks,
                            > >
                            > > 73 Dave
                            > >
                            > > n4zkf
                            > >
                            > > www.n4zkf.com <http://www.n4zkf. com <http://www.n4zkf. com>>
                            > >
                            > >
                            > > ------------ --------- --------- --------- --------- --------- -
                            > > --
                            > >
                            > > *From:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                            > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>]
                            > > *On Behalf Of *Mike Melnik
                            > > *Sent:* Saturday, March 15, 2008 12:57 PM
                            > > *To:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                            > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup
                            > > for my area.
                            > >
                            > > /Jeff/
                            > >
                            > > /After running WinFbb 7.01-35 also know as 7.01A for a couple
                            > > of years I finally gave up and switched/
                            > >
                            > > /To WFBB 7.00E 32 Bit with BPQ32U latest Version 410D, to many
                            > > BUGS in 7.01A./
                            > >
                            > > / I also use Telpac for Winlink connections, AGWPE isn't
                            > > needed as the BPQ32U has an AGWtoBPQ look a like/
                            > >
                            > > / for programs needing AGWPE but if you want, AGWPE can be
                            > > used with BPQ32U, for me AGWPE is just one/
                            > >
                            > > /less program I don't need running./
                            > >
                            > > /One problem with all of the 16 Bit WFBB 7.00E, G and I is the
                            > > processor usage is 100% where as the /
                            > >
                            > > /32 Bit 7.00E runs nicely at 6%, if you are running W2K or XP
                            > > a couple of changes need to be made/
                            > >
                            > > /to make the Maintenance (Housekeeping) program to work./
                            > >
                            > > /As to a list of active BBS'S yes you are right it is hard to
                            > > find, I will be more then happy to help you out/
                            > >
                            > > /With all needed Programs and Files for BPQ and WFBB./
                            > >
                            > > /BTW most Winlink Uses/Nodes are switching from TELPAC to
                            > > ether Packlink or RMS BETA./
                            > >
                            > > Mike Melnik
                            > > N9PMO
                            > > E-Mails Scanned By Symantec Corporate A/V
                            > >
                            > > -----Original Message-----
                            > > *From:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                            > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>]
                            > > *On Behalf Of *Jeff
                            > > *Sent:* Saturday, March 15, 2008 11:32 AM
                            > > *To:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                            > > *Subject:* [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                            > > area.
                            > >
                            > > Hey guys/gals,
                            > >
                            > > I'm seriously contemplating a new PBBS for my area here in
                            > > Northern
                            > > Kentucky and have a few questions maybe this group can help
                            > > answer for me.
                            > >
                            > > Is there a good list of current PBBS's out there for the USA? I've
                            > > looked around some on the net, but I haven't really found a
                            > > one-stop
                            > > listing. I find some single state lists and most of them are
                            > > really
                            > > old lists.
                            > >
                            > > I've lightly perused over some of the documents out there, BTW the
                            > > best are found here on this group. I gather there are some bugs in
                            > > FBB when used with BPQ32? Just curious what these are in brief?
                            > >
                            > > Anyone on the list willing to give me some do's, dont's, and
                            > > things to
                            > > watch out for with BPQ32 and WinFBB?
                            > >
                            > > Latest version of WinFBB (which looks to be 7.00i) good to
                            > > use, or is
                            > > one of the prior versions better? Sometimes the latest and
                            > > greatest
                            > > isn't always the greatest ;-)
                            > >
                            > > I gather the Win32 WinFBB is pretty much Alpha software and
                            > > the Win16
                            > > stuff is much more stable?
                            > >
                            > > Can I, or better stated, has anyone ran WinFBB and BPQ32 alongside
                            > > WinLink on the same TNC/Radio? AGW the route to go for this if
                            > > it's
                            > > possible? Would kind of like to offer a WinLink telpac station for
                            > > the area, but maximize existing equipment if possible.
                            > >
                            > > I'd probably have to go with a VHF/UHF local port and forward
                            > > via the
                            > > internet. Pros and cons of this? How would I go about, or who do I
                            > > contact, for forwarding arrangements and so forth?
                            > >
                            > > Thanks in advance for your patience with my questions!
                            > >
                            > > 73
                            > > Jeff
                            > > WA4ZKO
                            > >
                            > >
                            >
                            > --
                            >
                            > K.O. Higgs
                            > n0kfq@centurytel. net <mailto:n0kfq% 40centurytel. net>
                            >
                            > ------------ --------- --------- ------
                            >
                            > Yahoo! Groups Links
                            >
                            >

                            --

                            K.O. Higgs
                            n0kfq@centurytel. net

                          • David Calder
                            That s all I ever did also. I (BPQ) port in FBB and then all the ports in BPQ to handle the radios. Connect to the BPQ node, then tell it what port to connect
                            Message 13 of 21 , Mar 15, 2008
                            • 0 Attachment
                              That's all I ever did also. I (BPQ) port in FBB and then all the ports in
                              BPQ to handle the radios. Connect to the BPQ node, then tell it what
                              port to connect out of.
                               
                               


                              From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Mike Melnik
                              Sent: Saturday, March 15, 2008 7:51 PM
                              To: BPQ32@yahoogroups.com
                              Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

                              Dave

                               

                              I will send you my port.sys I have only 1 BPQ Port allocated in WFBB to handle all the BPQ Ports

                              If you need to vary the Pacl per port this can be done in the BPQCFG.TXT just remember to run

                              The BPQCFG.EXE without BPQ/FBB running to compile the BPQCFG.TXT to the BIN.

                               

                              Mike Melnik
                              N9PMO
                              E-Mails Scanned By Symantec Corporate A/V
                               
                               

                              -----Original Message-----
                              From:
                              BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com] On Behalf Of David Calder
                              Sent: Saturday, March 15, 2008 6:41 PM
                              To:
                              BPQ32@yahoogroups. com
                              Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

                               

                              Wallah!!! 20 Meter port up running a 1278B in KISS and also using

                              a USB to serial adapter! I have got to re-wire the cable to the

                              Yaesu FT-840 I used though. Right now I have it on my FT-2000!

                               

                              Thanks all. Now to get the other port of it to work at the same time.

                               

                              Dave

                               

                               


                              From: BPQ32@yahoogroups. com [mailto:BPQ32@ yahoogroups. com] On Behalf Of K.O. Higgs
                              Sent: Saturday, March 15, 2008 7:22 PM
                              To: BPQ32@yahoogroups. com
                              Subject: Re: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

                              To shut down bpq, I exit fbb then right click on the bpq icon, select
                              bpq.exe, click on
                              the red X.

                              K.O.

                              David Calder wrote:
                              >
                              >
                              > It's still in the task bar. How do I shut it down? Re-booting is not
                              > an option as there is two DX Cluster nodes on this machine.
                              >
                              > What's the name of the process? Anyone know? I'll end it.
                              >
                              > Thanks for the fast response guys. This is great...
                              >
                              >
                              > -----Original Message-----
                              > From: BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                              > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>] On
                              > Behalf Of K.O.
                              > Higgs
                              > Sent: Saturday, March 15, 2008 7:09 PM
                              > To: BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                              > Subject: Re: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.
                              >
                              > I have had to shut down bpq and re-start it to get bpqcfg.bin loaded.
                              >
                              > 73, K.O.
                              >
                              > David Calder wrote:
                              > >
                              > > OK, I added the new KISS port to bpqcfg.txt. re-ran bpqconfig. It
                              > > still shows the old port. Have I been at this too long today? What an
                              > > I missing?
                              > >
                              > >
                              > ------------ --------- --------- --------- --------- --------- -
                              > > *From:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                              > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>] *On
                              > > Behalf Of *Mike Melnik
                              > > *Sent:* Saturday, March 15, 2008 4:20 PM
                              > > *To:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                              > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                              > > area.
                              > >
                              > > /Dave N4ZKF/
                              > >
                              > > //
                              > >
                              > > /K4GBB needs to check his V Statement in your forwarding block, he
                              > > is probably missing the/
                              > >
                              > > /Period Example: V .N9PMO$WPassWord$ W/
                              > >
                              > > //
                              > >
                              > > /The Period stops the echo and starts the Handshaking upon
                              > > connection./
                              > >
                              > > //
                              > >
                              > > /I will send you the Kiss stuff to your E-Mail Address. /
                              > >
                              > > //
                              > >
                              > > Mike Melnik
                              > > N9PMO
                              > > E-Mails Scanned By Symantec Corporate A/V
                              > >
                              > > -----Original Message-----
                              > > *From:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                              > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>] *On
                              > > Behalf Of *David Calder
                              > > *Sent:* Saturday, March 15, 2008 2:35 PM
                              > > *To:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                              > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                              > > area.
                              > >
                              > > Well. It's up and running just fine. I have one forward protocol
                              > > error with one
                              > >
                              > > BBS and the rest work fine. I would say it's not me. BPQ 410D is
                              > > sweet
                              > >
                              > > and working with FBB. The telnet port is working just fine.
                              > >
                              > > This is also running on a machine with my CC Cluster AND AR
                              > > Cluster
                              > >
                              > > DX nodes! They all are playing nicely together.
                              > >
                              > > The only thing left is the RF ports. Mike! Got an example KISS
                              > > port
                              > >
                              > > for 410D?? It's been years since I ran a kiss port as I had the
                              > > DRSI all
                              > >
                              > > the time.
                              > >
                              > > Thanks,
                              > >
                              > > 73 Dave
                              > >
                              > > n4zkf
                              > >
                              > > www.n4zkf.com <http://www.n4zkf. com <http://www.n4zkf. com>>
                              > >
                              > >
                              > > ------------ --------- --------- --------- --------- --------- -
                              > > --
                              > >
                              > > *From:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                              > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>]
                              > > *On Behalf Of *Mike Melnik
                              > > *Sent:* Saturday, March 15, 2008 12:57 PM
                              > > *To:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                              > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup
                              > > for my area.
                              > >
                              > > /Jeff/
                              > >
                              > > /After running WinFbb 7.01-35 also know as 7.01A for a couple
                              > > of years I finally gave up and switched/
                              > >
                              > > /To WFBB 7.00E 32 Bit with BPQ32U latest Version 410D, to many
                              > > BUGS in 7.01A./
                              > >
                              > > / I also use Telpac for Winlink connections, AGWPE isn't
                              > > needed as the BPQ32U has an AGWtoBPQ look a like/
                              > >
                              > > / for programs needing AGWPE but if you want, AGWPE can be
                              > > used with BPQ32U, for me AGWPE is just one/
                              > >
                              > > /less program I don't need running./
                              > >
                              > > /One problem with all of the 16 Bit WFBB 7.00E, G and I is the
                              > > processor usage is 100% where as the /
                              > >
                              > > /32 Bit 7.00E runs nicely at 6%, if you are running W2K or XP
                              > > a couple of changes need to be made/
                              > >
                              > > /to make the Maintenance (Housekeeping) program to work./
                              > >
                              > > /As to a list of active BBS'S yes you are right it is hard to
                              > > find, I will be more then happy to help you out/
                              > >
                              > > /With all needed Programs and Files for BPQ and WFBB./
                              > >
                              > > /BTW most Winlink Uses/Nodes are switching from TELPAC to
                              > > ether Packlink or RMS BETA./
                              > >
                              > > Mike Melnik
                              > > N9PMO
                              > > E-Mails Scanned By Symantec Corporate A/V
                              > >
                              > > -----Original Message-----
                              > > *From:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                              > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>]
                              > > *On Behalf Of *Jeff
                              > > *Sent:* Saturday, March 15, 2008 11:32 AM
                              > > *To:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                              > > *Subject:* [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                              > > area.
                              > >
                              > > Hey guys/gals,
                              > >
                              > > I'm seriously contemplating a new PBBS for my area here in
                              > > Northern
                              > > Kentucky and have a few questions maybe this group can help
                              > > answer for me.
                              > >
                              > > Is there a good list of current PBBS's out there for the USA? I've
                              > > looked around some on the net, but I haven't really found a
                              > > one-stop
                              > > listing. I find some single state lists and most of them are
                              > > really
                              > > old lists.
                              > >
                              > > I've lightly perused over some of the documents out there, BTW the
                              > > best are found here on this group. I gather there are some bugs in
                              > > FBB when used with BPQ32? Just curious what these are in brief?
                              > >
                              > > Anyone on the list willing to give me some do's, dont's, and
                              > > things to
                              > > watch out for with BPQ32 and WinFBB?
                              > >
                              > > Latest version of WinFBB (which looks to be 7.00i) good to
                              > > use, or is
                              > > one of the prior versions better? Sometimes the latest and
                              > > greatest
                              > > isn't always the greatest ;-)
                              > >
                              > > I gather the Win32 WinFBB is pretty much Alpha software and
                              > > the Win16
                              > > stuff is much more stable?
                              > >
                              > > Can I, or better stated, has anyone ran WinFBB and BPQ32 alongside
                              > > WinLink on the same TNC/Radio? AGW the route to go for this if
                              > > it's
                              > > possible? Would kind of like to offer a WinLink telpac station for
                              > > the area, but maximize existing equipment if possible.
                              > >
                              > > I'd probably have to go with a VHF/UHF local port and forward
                              > > via the
                              > > internet. Pros and cons of this? How would I go about, or who do I
                              > > contact, for forwarding arrangements and so forth?
                              > >
                              > > Thanks in advance for your patience with my questions!
                              > >
                              > > 73
                              > > Jeff
                              > > WA4ZKO
                              > >
                              > >
                              >
                              > --
                              >
                              > K.O. Higgs
                              > n0kfq@centurytel. net <mailto:n0kfq% 40centurytel. net>
                              >
                              > ------------ --------- --------- ------
                              >
                              > Yahoo! Groups Links
                              >
                              >

                              --

                              K.O. Higgs
                              n0kfq@centurytel. net

                            • David Calder
                              How did you use both ports on one TNC. Use A and B in Channel like I did with the DRSI? _____ From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On
                              Message 14 of 21 , Mar 15, 2008
                              • 0 Attachment
                                How did you use both ports on one TNC. Use A and B in Channel like
                                I did with the DRSI?
                                 


                                From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Mike Melnik
                                Sent: Saturday, March 15, 2008 7:08 PM
                                To: BPQ32@yahoogroups.com
                                Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

                                Dave some times BPQ.EXE or AGWtoBPQ.EXE stays running but no Icon in the tool try, check by

                                Running the Task Manager.

                                 

                                BTY on my BPQ the first two ports is an Kantronics 9612

                                 

                                Mike Melnik
                                N9PMO
                                E-Mails Scanned By Symantec Corporate A/V
                                 
                                 

                                -----Original Message-----
                                From:
                                BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com] On Behalf Of David Calder
                                Sent: Saturday, March 15, 2008 6:04 PM
                                To:
                                BPQ32@yahoogroups. com
                                Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

                                 

                                OK, I added the new KISS port to bpqcfg.txt. re-ran bpqconfig. It still shows

                                the old port. Have I been at this too long today? What an I missing?

                                 

                                 


                                From: BPQ32@yahoogroups. com [mailto:BPQ32@ yahoogroups. com] On Behalf Of Mike Melnik
                                Sent: Saturday, March 15, 2008 4:20 PM
                                To: BPQ32@yahoogroups. com
                                Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

                                Dave N4ZKF

                                 

                                K4GBB needs to check his V Statement in your forwarding block, he is probably missing the

                                Period Example:   V .N9PMO$WPassWord$ W

                                 

                                The Period stops the echo and starts the Handshaking upon connection.

                                 

                                I will send you the Kiss stuff to your E-Mail Address.

                                 

                                Mike Melnik
                                N9PMO
                                E-Mails Scanned By Symantec Corporate A/V
                                 
                                 

                                -----Original Message-----
                                From: BPQ32@yahoogroups. com [mailto:BPQ32@ yahoogroups. com] On Behalf Of David Calder
                                Sent: Saturday, March 15, 2008 2:35 PM
                                To: BPQ32@yahoogroups. com
                                Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

                                 

                                Well. It's up and running just fine. I have one forward protocol error with one

                                BBS and the rest work fine. I would say it's not me. BPQ 410D is sweet

                                and working with FBB. The telnet port is working just fine.

                                 

                                This is also running on a machine with my CC Cluster AND AR Cluster

                                DX nodes! They all are playing nicely together.

                                 

                                The only thing left is the RF ports. Mike! Got an example KISS port

                                for 410D?? It's been years since I ran a kiss port as I had the DRSI all

                                the time.

                                 

                                Thanks,

                                 

                                73 Dave

                                n4zkf

                                www.n4zkf.com

                                 

                                 

                                 


                                From: BPQ32@yahoogroups. com [mailto:BPQ32@ yahoogroups. com] On Behalf Of Mike Melnik
                                Sent: Saturday, March 15, 2008 12:57 PM
                                To: BPQ32@yahoogroups. com
                                Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

                                Jeff

                                 

                                After running WinFbb 7.01-35 also know as 7.01A for a couple of years I finally gave up and switched

                                To WFBB 7.00E 32 Bit with BPQ32U latest Version 410D, to many BUGS in 7.01A.

                                 I also use Telpac for Winlink connections, AGWPE isn’t needed as the BPQ32U has an AGWtoBPQ look a like

                                 for programs needing AGWPE but if you want, AGWPE can be used with BPQ32U, for me AGWPE is just one

                                less program I don’t need running.

                                 

                                One problem with all of the 16 Bit WFBB 7.00E, G and I is the processor usage is 100% where as the

                                32 Bit 7.00E runs nicely at 6%, if you are running W2K or XP a couple of changes need to be made

                                to make the Maintenance (Housekeeping) program to work.

                                 

                                As to a list of active BBS’S yes you are right it is hard to find, I will be more then happy to help you out

                                With all needed Programs and Files for BPQ and WFBB.

                                 

                                BTW most Winlink Uses/Nodes are switching from TELPAC to ether Packlink or RMS BETA.

                                 

                                Mike Melnik
                                N9PMO
                                E-Mails Scanned By Symantec Corporate A/V
                                 
                                 

                                -----Original Message-----
                                From: BPQ32@yahoogroups. com [mailto:BPQ32@ yahoogroups. com] On Behalf Of Jeff
                                Sent: Saturday, March 15, 2008 11:32 AM
                                To: BPQ32@yahoogroups. com
                                Subject: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

                                 

                                Hey guys/gals,

                                I'm seriously contemplating a new PBBS for my area here in Northern
                                Kentucky and have a few questions maybe this group can help answer for me.

                                Is there a good list of current PBBS's out there for the USA? I've
                                looked around some on the net, but I haven't really found a one-stop
                                listing. I find some single state lists and most of them are really
                                old lists.

                                I've lightly perused over some of the documents out there, BTW the
                                best are found here on this group. I gather there are some bugs in
                                FBB when used with BPQ32? Just curious what these are in brief?

                                Anyone on the list willing to give me some do's, dont's, and things to
                                watch out for with BPQ32 and WinFBB?

                                Latest version of WinFBB (which looks to be 7.00i) good to use, or is
                                one of the prior versions better? Sometimes the latest and greatest
                                isn't always the greatest ;-)

                                I gather the Win32 WinFBB is pretty much Alpha software and the Win16
                                stuff is much more stable?

                                Can I, or better stated, has anyone ran WinFBB and BPQ32 alongside
                                WinLink on the same TNC/Radio? AGW the route to go for this if it's
                                possible? Would kind of like to offer a WinLink telpac station for
                                the area, but maximize existing equipment if possible.

                                I'd probably have to go with a VHF/UHF local port and forward via the
                                internet. Pros and cons of this? How would I go about, or who do I
                                contact, for forwarding arrangements and so forth?

                                Thanks in advance for your patience with my questions!

                                73
                                Jeff
                                WA4ZKO

                              • David Calder
                                OK, here is my only snag. Which isn t that big a deal it s just going to make me use two TNC s when I was hoping to do it with one. I can t seem to use the
                                Message 15 of 21 , Mar 16, 2008
                                • 0 Attachment
                                  OK, here is my only snag. Which isn't that big a deal it's just going to
                                  make me use two TNC's when I was hoping to do it with one.
                                   
                                  I can't seem to use the "other" radio port in my 1278. I added a second
                                  port in bpqcfg.txt file changed the "channel" from A like port one to "B"
                                  to tell it to use the second radio port of the 1278. It doesn't. It still uses
                                  the same radio port. The 300 HF baud port.
                                   
                                  This is all I had to do with the DRSI cards was change the channel. I
                                  guess it doesn't work for a 1278?
                                   
                                  73 Dave
                                   


                                  From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Mike Melnik
                                  Sent: Saturday, March 15, 2008 7:51 PM
                                  To: BPQ32@yahoogroups.com
                                  Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

                                  Dave

                                   

                                  I will send you my port.sys I have only 1 BPQ Port allocated in WFBB to handle all the BPQ Ports

                                  If you need to vary the Pacl per port this can be done in the BPQCFG.TXT just remember to run

                                  The BPQCFG.EXE without BPQ/FBB running to compile the BPQCFG.TXT to the BIN.

                                   

                                  Mike Melnik
                                  N9PMO
                                  E-Mails Scanned By Symantec Corporate A/V
                                   
                                   

                                  -----Original Message-----
                                  From:
                                  BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com] On Behalf Of David Calder
                                  Sent: Saturday, March 15, 2008 6:41 PM
                                  To:
                                  BPQ32@yahoogroups. com
                                  Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

                                   

                                  Wallah!!! 20 Meter port up running a 1278B in KISS and also using

                                  a USB to serial adapter! I have got to re-wire the cable to the

                                  Yaesu FT-840 I used though. Right now I have it on my FT-2000!

                                   

                                  Thanks all. Now to get the other port of it to work at the same time.

                                   

                                  Dave

                                   

                                   


                                  From: BPQ32@yahoogroups. com [mailto:BPQ32@ yahoogroups. com] On Behalf Of K.O. Higgs
                                  Sent: Saturday, March 15, 2008 7:22 PM
                                  To: BPQ32@yahoogroups. com
                                  Subject: Re: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.

                                  To shut down bpq, I exit fbb then right click on the bpq icon, select
                                  bpq.exe, click on
                                  the red X.

                                  K.O.

                                  David Calder wrote:
                                  >
                                  >
                                  > It's still in the task bar. How do I shut it down? Re-booting is not
                                  > an option as there is two DX Cluster nodes on this machine.
                                  >
                                  > What's the name of the process? Anyone know? I'll end it.
                                  >
                                  > Thanks for the fast response guys. This is great...
                                  >
                                  >
                                  > -----Original Message-----
                                  > From: BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                                  > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>] On
                                  > Behalf Of K.O.
                                  > Higgs
                                  > Sent: Saturday, March 15, 2008 7:09 PM
                                  > To: BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                                  > Subject: Re: [BPQ32] Contemplating a new BPQ/WinFBB setup for my area.
                                  >
                                  > I have had to shut down bpq and re-start it to get bpqcfg.bin loaded.
                                  >
                                  > 73, K.O.
                                  >
                                  > David Calder wrote:
                                  > >
                                  > > OK, I added the new KISS port to bpqcfg.txt. re-ran bpqconfig. It
                                  > > still shows the old port. Have I been at this too long today? What an
                                  > > I missing?
                                  > >
                                  > >
                                  > ------------ --------- --------- --------- --------- --------- -
                                  > > *From:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                                  > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>] *On
                                  > > Behalf Of *Mike Melnik
                                  > > *Sent:* Saturday, March 15, 2008 4:20 PM
                                  > > *To:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                                  > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                  > > area.
                                  > >
                                  > > /Dave N4ZKF/
                                  > >
                                  > > //
                                  > >
                                  > > /K4GBB needs to check his V Statement in your forwarding block, he
                                  > > is probably missing the/
                                  > >
                                  > > /Period Example: V .N9PMO$WPassWord$ W/
                                  > >
                                  > > //
                                  > >
                                  > > /The Period stops the echo and starts the Handshaking upon
                                  > > connection./
                                  > >
                                  > > //
                                  > >
                                  > > /I will send you the Kiss stuff to your E-Mail Address. /
                                  > >
                                  > > //
                                  > >
                                  > > Mike Melnik
                                  > > N9PMO
                                  > > E-Mails Scanned By Symantec Corporate A/V
                                  > >
                                  > > -----Original Message-----
                                  > > *From:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                                  > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>] *On
                                  > > Behalf Of *David Calder
                                  > > *Sent:* Saturday, March 15, 2008 2:35 PM
                                  > > *To:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                                  > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                  > > area.
                                  > >
                                  > > Well. It's up and running just fine. I have one forward protocol
                                  > > error with one
                                  > >
                                  > > BBS and the rest work fine. I would say it's not me. BPQ 410D is
                                  > > sweet
                                  > >
                                  > > and working with FBB. The telnet port is working just fine.
                                  > >
                                  > > This is also running on a machine with my CC Cluster AND AR
                                  > > Cluster
                                  > >
                                  > > DX nodes! They all are playing nicely together.
                                  > >
                                  > > The only thing left is the RF ports. Mike! Got an example KISS
                                  > > port
                                  > >
                                  > > for 410D?? It's been years since I ran a kiss port as I had the
                                  > > DRSI all
                                  > >
                                  > > the time.
                                  > >
                                  > > Thanks,
                                  > >
                                  > > 73 Dave
                                  > >
                                  > > n4zkf
                                  > >
                                  > > www.n4zkf.com <http://www.n4zkf. com <http://www.n4zkf. com>>
                                  > >
                                  > >
                                  > > ------------ --------- --------- --------- --------- --------- -
                                  > > --
                                  > >
                                  > > *From:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                                  > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>]
                                  > > *On Behalf Of *Mike Melnik
                                  > > *Sent:* Saturday, March 15, 2008 12:57 PM
                                  > > *To:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                                  > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup
                                  > > for my area.
                                  > >
                                  > > /Jeff/
                                  > >
                                  > > /After running WinFbb 7.01-35 also know as 7.01A for a couple
                                  > > of years I finally gave up and switched/
                                  > >
                                  > > /To WFBB 7.00E 32 Bit with BPQ32U latest Version 410D, to many
                                  > > BUGS in 7.01A./
                                  > >
                                  > > / I also use Telpac for Winlink connections, AGWPE isn't
                                  > > needed as the BPQ32U has an AGWtoBPQ look a like/
                                  > >
                                  > > / for programs needing AGWPE but if you want, AGWPE can be
                                  > > used with BPQ32U, for me AGWPE is just one/
                                  > >
                                  > > /less program I don't need running./
                                  > >
                                  > > /One problem with all of the 16 Bit WFBB 7.00E, G and I is the
                                  > > processor usage is 100% where as the /
                                  > >
                                  > > /32 Bit 7.00E runs nicely at 6%, if you are running W2K or XP
                                  > > a couple of changes need to be made/
                                  > >
                                  > > /to make the Maintenance (Housekeeping) program to work./
                                  > >
                                  > > /As to a list of active BBS'S yes you are right it is hard to
                                  > > find, I will be more then happy to help you out/
                                  > >
                                  > > /With all needed Programs and Files for BPQ and WFBB./
                                  > >
                                  > > /BTW most Winlink Uses/Nodes are switching from TELPAC to
                                  > > ether Packlink or RMS BETA./
                                  > >
                                  > > Mike Melnik
                                  > > N9PMO
                                  > > E-Mails Scanned By Symantec Corporate A/V
                                  > >
                                  > > -----Original Message-----
                                  > > *From:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                                  > [mailto:BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>]
                                  > > *On Behalf Of *Jeff
                                  > > *Sent:* Saturday, March 15, 2008 11:32 AM
                                  > > *To:* BPQ32@yahoogroups. com <mailto:BPQ32% 40yahoogroups. com>
                                  > > *Subject:* [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                  > > area.
                                  > >
                                  > > Hey guys/gals,
                                  > >
                                  > > I'm seriously contemplating a new PBBS for my area here in
                                  > > Northern
                                  > > Kentucky and have a few questions maybe this group can help
                                  > > answer for me.
                                  > >
                                  > > Is there a good list of current PBBS's out there for the USA? I've
                                  > > looked around some on the net, but I haven't really found a
                                  > > one-stop
                                  > > listing. I find some single state lists and most of them are
                                  > > really
                                  > > old lists.
                                  > >
                                  > > I've lightly perused over some of the documents out there, BTW the
                                  > > best are found here on this group. I gather there are some bugs in
                                  > > FBB when used with BPQ32? Just curious what these are in brief?
                                  > >
                                  > > Anyone on the list willing to give me some do's, dont's, and
                                  > > things to
                                  > > watch out for with BPQ32 and WinFBB?
                                  > >
                                  > > Latest version of WinFBB (which looks to be 7.00i) good to
                                  > > use, or is
                                  > > one of the prior versions better? Sometimes the latest and
                                  > > greatest
                                  > > isn't always the greatest ;-)
                                  > >
                                  > > I gather the Win32 WinFBB is pretty much Alpha software and
                                  > > the Win16
                                  > > stuff is much more stable?
                                  > >
                                  > > Can I, or better stated, has anyone ran WinFBB and BPQ32 alongside
                                  > > WinLink on the same TNC/Radio? AGW the route to go for this if
                                  > > it's
                                  > > possible? Would kind of like to offer a WinLink telpac station for
                                  > > the area, but maximize existing equipment if possible.
                                  > >
                                  > > I'd probably have to go with a VHF/UHF local port and forward
                                  > > via the
                                  > > internet. Pros and cons of this? How would I go about, or who do I
                                  > > contact, for forwarding arrangements and so forth?
                                  > >
                                  > > Thanks in advance for your patience with my questions!
                                  > >
                                  > > 73
                                  > > Jeff
                                  > > WA4ZKO
                                  > >
                                  > >
                                  >
                                  > --
                                  >
                                  > K.O. Higgs
                                  > n0kfq@centurytel. net <mailto:n0kfq% 40centurytel. net>
                                  >
                                  > ------------ --------- --------- ------
                                  >
                                  > Yahoo! Groups Links
                                  >
                                  >

                                  --

                                  K.O. Higgs
                                  n0kfq@centurytel. net

                                • Karl
                                  Dave, I have been watching your messages about using two ports with BPQ. I run an old KAM with BPQ and both ports work just as they are suppose to. If you
                                  Message 16 of 21 , Mar 16, 2008
                                  • 0 Attachment
                                    Dave,

                                    I have been watching your messages about using two ports with BPQ. I
                                    run an old KAM with BPQ and both ports work just as they are suppose
                                    to. If you would send your bpqcfg.txt file to kb8dm@... I will
                                    take a look at it and compare it to my configuration file.

                                    Again as always your must complile the txt file into bin.

                                    Karl



                                    --- In BPQ32@yahoogroups.com, "David Calder" <n4zkf@...> wrote:
                                    >
                                    > OK, here is my only snag. Which isn't that big a deal it's just
                                    going to
                                    > make me use two TNC's when I was hoping to do it with one.
                                    >
                                    > I can't seem to use the "other" radio port in my 1278. I added a
                                    second
                                    > port in bpqcfg.txt file changed the "channel" from A like port one
                                    to "B"
                                    > to tell it to use the second radio port of the 1278. It doesn't. It
                                    still
                                    > uses
                                    > the same radio port. The 300 HF baud port.
                                    >
                                    > This is all I had to do with the DRSI cards was change the channel.
                                    I
                                    > guess it doesn't work for a 1278?
                                    >
                                    > 73 Dave
                                    >
                                    >
                                    >
                                    > _____
                                    >
                                    > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On
                                    Behalf Of Mike
                                    > Melnik
                                    > Sent: Saturday, March 15, 2008 7:51 PM
                                    > To: BPQ32@yahoogroups.com
                                    > Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                    area.
                                    >
                                    >
                                    >
                                    >
                                    >
                                    >
                                    > Dave
                                    >
                                    >
                                    >
                                    > I will send you my port.sys I have only 1 BPQ Port allocated in
                                    WFBB to
                                    > handle all the BPQ Ports
                                    >
                                    > If you need to vary the Pacl per port this can be done in the
                                    BPQCFG.TXT
                                    > just remember to run
                                    >
                                    > The BPQCFG.EXE without BPQ/FBB running to compile the BPQCFG.TXT to
                                    the BIN.
                                    >
                                    >
                                    >
                                    > Mike Melnik
                                    > N9PMO
                                    > E-Mails Scanned By Symantec Corporate A/V
                                    >
                                    >
                                    >
                                    > -----Original Message-----
                                    > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On
                                    Behalf Of
                                    > David Calder
                                    > Sent: Saturday, March 15, 2008 6:41 PM
                                    > To: BPQ32@yahoogroups.com
                                    > Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                    area.
                                    >
                                    >
                                    >
                                    > Wallah!!! 20 Meter port up running a 1278B in KISS and also using
                                    >
                                    > a USB to serial adapter! I have got to re-wire the cable to the
                                    >
                                    > Yaesu FT-840 I used though. Right now I have it on my FT-2000!
                                    >
                                    >
                                    >
                                    > Thanks all. Now to get the other port of it to work at the same
                                    time.
                                    >
                                    >
                                    >
                                    > Dave
                                    >
                                    >
                                    >
                                    >
                                    >
                                    >
                                    > _____
                                    >
                                    >
                                    > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On
                                    Behalf Of K.O.
                                    > Higgs
                                    > Sent: Saturday, March 15, 2008 7:22 PM
                                    > To: BPQ32@yahoogroups.com
                                    > Subject: Re: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                    area.
                                    >
                                    > To shut down bpq, I exit fbb then right click on the bpq icon,
                                    select
                                    > bpq.exe, click on
                                    > the red X.
                                    >
                                    > K.O.
                                    >
                                    > David Calder wrote:
                                    > >
                                    > >
                                    > > It's still in the task bar. How do I shut it down? Re-booting is
                                    not
                                    > > an option as there is two DX Cluster nodes on this machine.
                                    > >
                                    > > What's the name of the process? Anyone know? I'll end it.
                                    > >
                                    > > Thanks for the fast response guys. This is great...
                                    > >
                                    > >
                                    > > -----Original Message-----
                                    > > From: BPQ32@yahoogroups. <mailto:BPQ32%40yahoogroups.com> com
                                    > <mailto:BPQ32%40yahoogroups.com>
                                    > > [mailto:BPQ32@yahoogroups. <mailto:BPQ32%40yahoogroups.com> com
                                    > <mailto:BPQ32%40yahoogroups.com>] On
                                    > > Behalf Of K.O.
                                    > > Higgs
                                    > > Sent: Saturday, March 15, 2008 7:09 PM
                                    > > To: BPQ32@yahoogroups. <mailto:BPQ32%40yahoogroups.com> com
                                    > <mailto:BPQ32%40yahoogroups.com>
                                    > > Subject: Re: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                    area.
                                    > >
                                    > > I have had to shut down bpq and re-start it to get bpqcfg.bin
                                    loaded.
                                    > >
                                    > > 73, K.O.
                                    > >
                                    > > David Calder wrote:
                                    > > >
                                    > > > OK, I added the new KISS port to bpqcfg.txt. re-ran bpqconfig.
                                    It
                                    > > > still shows the old port. Have I been at this too long today?
                                    What an
                                    > > > I missing?
                                    > > >
                                    > > >
                                    > > ----------------------------------------------------------
                                    > > > *From:* BPQ32@yahoogroups. <mailto:BPQ32%40yahoogroups.com> com
                                    > <mailto:BPQ32%40yahoogroups.com>
                                    > > [mailto:BPQ32@yahoogroups. <mailto:BPQ32%40yahoogroups.com> com
                                    > <mailto:BPQ32%40yahoogroups.com>] *On
                                    > > > Behalf Of *Mike Melnik
                                    > > > *Sent:* Saturday, March 15, 2008 4:20 PM
                                    > > > *To:* BPQ32@yahoogroups. <mailto:BPQ32%40yahoogroups.com> com
                                    > <mailto:BPQ32%40yahoogroups.com>
                                    > > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for
                                    my
                                    > > > area.
                                    > > >
                                    > > > /Dave N4ZKF/
                                    > > >
                                    > > > //
                                    > > >
                                    > > > /K4GBB needs to check his V Statement in your forwarding block,
                                    he
                                    > > > is probably missing the/
                                    > > >
                                    > > > /Period Example: V .N9PMO$WPassWord$W/
                                    > > >
                                    > > > //
                                    > > >
                                    > > > /The Period stops the echo and starts the Handshaking upon
                                    > > > connection./
                                    > > >
                                    > > > //
                                    > > >
                                    > > > /I will send you the Kiss stuff to your E-Mail Address. /
                                    > > >
                                    > > > //
                                    > > >
                                    > > > Mike Melnik
                                    > > > N9PMO
                                    > > > E-Mails Scanned By Symantec Corporate A/V
                                    > > >
                                    > > > -----Original Message-----
                                    > > > *From:* BPQ32@yahoogroups. <mailto:BPQ32%40yahoogroups.com> com
                                    > <mailto:BPQ32%40yahoogroups.com>
                                    > > [mailto:BPQ32@yahoogroups. <mailto:BPQ32%40yahoogroups.com> com
                                    > <mailto:BPQ32%40yahoogroups.com>] *On
                                    > > > Behalf Of *David Calder
                                    > > > *Sent:* Saturday, March 15, 2008 2:35 PM
                                    > > > *To:* BPQ32@yahoogroups. <mailto:BPQ32%40yahoogroups.com> com
                                    > <mailto:BPQ32%40yahoogroups.com>
                                    > > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for
                                    my
                                    > > > area.
                                    > > >
                                    > > > Well. It's up and running just fine. I have one forward protocol
                                    > > > error with one
                                    > > >
                                    > > > BBS and the rest work fine. I would say it's not me. BPQ 410D is
                                    > > > sweet
                                    > > >
                                    > > > and working with FBB. The telnet port is working just fine.
                                    > > >
                                    > > > This is also running on a machine with my CC Cluster AND AR
                                    > > > Cluster
                                    > > >
                                    > > > DX nodes! They all are playing nicely together.
                                    > > >
                                    > > > The only thing left is the RF ports. Mike! Got an example KISS
                                    > > > port
                                    > > >
                                    > > > for 410D?? It's been years since I ran a kiss port as I had the
                                    > > > DRSI all
                                    > > >
                                    > > > the time.
                                    > > >
                                    > > > Thanks,
                                    > > >
                                    > > > 73 Dave
                                    > > >
                                    > > > n4zkf
                                    > > >
                                    > > > www.n4zkf.com <http://www.n4zkf <http://www.n4zkf.com> com
                                    > <http://www.n4zkf <http://www.n4zkf.com> com>>
                                    > > >
                                    > > >
                                    > > > ----------------------------------------------------------
                                    > > > --
                                    > > >
                                    > > > *From:* BPQ32@yahoogroups. <mailto:BPQ32%40yahoogroups.com> com
                                    > <mailto:BPQ32%40yahoogroups.com>
                                    > > [mailto:BPQ32@yahoogroups. <mailto:BPQ32%40yahoogroups.com> com
                                    > <mailto:BPQ32%40yahoogroups.com>]
                                    > > > *On Behalf Of *Mike Melnik
                                    > > > *Sent:* Saturday, March 15, 2008 12:57 PM
                                    > > > *To:* BPQ32@yahoogroups. <mailto:BPQ32%40yahoogroups.com> com
                                    > <mailto:BPQ32%40yahoogroups.com>
                                    > > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup
                                    > > > for my area.
                                    > > >
                                    > > > /Jeff/
                                    > > >
                                    > > > /After running WinFbb 7.01-35 also know as 7.01A for a couple
                                    > > > of years I finally gave up and switched/
                                    > > >
                                    > > > /To WFBB 7.00E 32 Bit with BPQ32U latest Version 410D, to many
                                    > > > BUGS in 7.01A./
                                    > > >
                                    > > > / I also use Telpac for Winlink connections, AGWPE isn't
                                    > > > needed as the BPQ32U has an AGWtoBPQ look a like/
                                    > > >
                                    > > > / for programs needing AGWPE but if you want, AGWPE can be
                                    > > > used with BPQ32U, for me AGWPE is just one/
                                    > > >
                                    > > > /less program I don't need running./
                                    > > >
                                    > > > /One problem with all of the 16 Bit WFBB 7.00E, G and I is the
                                    > > > processor usage is 100% where as the /
                                    > > >
                                    > > > /32 Bit 7.00E runs nicely at 6%, if you are running W2K or XP
                                    > > > a couple of changes need to be made/
                                    > > >
                                    > > > /to make the Maintenance (Housekeeping) program to work./
                                    > > >
                                    > > > /As to a list of active BBS'S yes you are right it is hard to
                                    > > > find, I will be more then happy to help you out/
                                    > > >
                                    > > > /With all needed Programs and Files for BPQ and WFBB./
                                    > > >
                                    > > > /BTW most Winlink Uses/Nodes are switching from TELPAC to
                                    > > > ether Packlink or RMS BETA./
                                    > > >
                                    > > > Mike Melnik
                                    > > > N9PMO
                                    > > > E-Mails Scanned By Symantec Corporate A/V
                                    > > >
                                    > > > -----Original Message-----
                                    > > > *From:* BPQ32@yahoogroups. <mailto:BPQ32%40yahoogroups.com> com
                                    > <mailto:BPQ32%40yahoogroups.com>
                                    > > [mailto:BPQ32@yahoogroups. <mailto:BPQ32%40yahoogroups.com> com
                                    > <mailto:BPQ32%40yahoogroups.com>]
                                    > > > *On Behalf Of *Jeff
                                    > > > *Sent:* Saturday, March 15, 2008 11:32 AM
                                    > > > *To:* BPQ32@yahoogroups. <mailto:BPQ32%40yahoogroups.com> com
                                    > <mailto:BPQ32%40yahoogroups.com>
                                    > > > *Subject:* [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                    > > > area.
                                    > > >
                                    > > > Hey guys/gals,
                                    > > >
                                    > > > I'm seriously contemplating a new PBBS for my area here in
                                    > > > Northern
                                    > > > Kentucky and have a few questions maybe this group can help
                                    > > > answer for me.
                                    > > >
                                    > > > Is there a good list of current PBBS's out there for the USA?
                                    I've
                                    > > > looked around some on the net, but I haven't really found a
                                    > > > one-stop
                                    > > > listing. I find some single state lists and most of them are
                                    > > > really
                                    > > > old lists.
                                    > > >
                                    > > > I've lightly perused over some of the documents out there, BTW
                                    the
                                    > > > best are found here on this group. I gather there are some bugs
                                    in
                                    > > > FBB when used with BPQ32? Just curious what these are in brief?
                                    > > >
                                    > > > Anyone on the list willing to give me some do's, dont's, and
                                    > > > things to
                                    > > > watch out for with BPQ32 and WinFBB?
                                    > > >
                                    > > > Latest version of WinFBB (which looks to be 7.00i) good to
                                    > > > use, or is
                                    > > > one of the prior versions better? Sometimes the latest and
                                    > > > greatest
                                    > > > isn't always the greatest ;-)
                                    > > >
                                    > > > I gather the Win32 WinFBB is pretty much Alpha software and
                                    > > > the Win16
                                    > > > stuff is much more stable?
                                    > > >
                                    > > > Can I, or better stated, has anyone ran WinFBB and BPQ32
                                    alongside
                                    > > > WinLink on the same TNC/Radio? AGW the route to go for this if
                                    > > > it's
                                    > > > possible? Would kind of like to offer a WinLink telpac station
                                    for
                                    > > > the area, but maximize existing equipment if possible.
                                    > > >
                                    > > > I'd probably have to go with a VHF/UHF local port and forward
                                    > > > via the
                                    > > > internet. Pros and cons of this? How would I go about, or who
                                    do I
                                    > > > contact, for forwarding arrangements and so forth?
                                    > > >
                                    > > > Thanks in advance for your patience with my questions!
                                    > > >
                                    > > > 73
                                    > > > Jeff
                                    > > > WA4ZKO
                                    > > >
                                    > > >
                                    > >
                                    > > --
                                    > >
                                    > > K.O. Higgs
                                    > > n0kfq@centurytel. <mailto:n0kfq%40centurytel.net> net
                                    > <mailto:n0kfq%40centurytel.net>
                                    > >
                                    > > ------------------------------------
                                    > >
                                    > > Yahoo! Groups Links
                                    > >
                                    > >
                                    >
                                    > --
                                    >
                                    > K.O. Higgs
                                    > n0kfq@centurytel. <mailto:n0kfq%40centurytel.net> net
                                    >
                                  • David Calder
                                    Been running BPQ for 20 years Karl. I understand the compile thing. I will send it though. Maybe I m missing something. It come up and compiles with two ports.
                                    Message 17 of 21 , Mar 16, 2008
                                    • 0 Attachment
                                      Been running BPQ for 20 years Karl. I understand the compile thing.
                                      I will send it though. Maybe I'm missing something.
                                       
                                      It come up and compiles with two ports. Shows two ports. I can
                                      connect to it thru the bbs or BPQ terminal. Pick either port 1 or
                                      2, it doesn't matter. It still uses the same port on the TNC.
                                       
                                       
                                       
                                      Thanks for the help.
                                       
                                      73 Dave
                                       


                                      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Karl
                                      Sent: Sunday, March 16, 2008 9:13 AM
                                      To: BPQ32@yahoogroups.com
                                      Subject: [BPQ32] Re: Contemplating a new BPQ/WinFBB setup for my area.

                                      Dave,

                                      I have been watching your messages about using two ports with BPQ. I
                                      run an old KAM with BPQ and both ports work just as they are suppose
                                      to. If you would send your bpqcfg.txt file to kb8dm@kb8dm. com I will
                                      take a look at it and compare it to my configuration file.

                                      Again as always your must complile the txt file into bin.

                                      Karl

                                      --- In BPQ32@yahoogroups. com, "David Calder" <n4zkf@...> wrote:
                                      >
                                      > OK, here is my only snag. Which isn't that big a deal it's just
                                      going to
                                      > make me use two TNC's when I was hoping to do it with one.
                                      >
                                      > I can't seem to use the "other" radio port in my 1278. I added a
                                      second
                                      > port in bpqcfg.txt file changed the "channel" from A like port one
                                      to "B"
                                      > to tell it to use the second radio port of the 1278. It doesn't. It
                                      still
                                      > uses
                                      > the same radio port. The 300 HF baud port.
                                      >
                                      > This is all I had to do with the DRSI cards was change the channel.
                                      I
                                      > guess it doesn't work for a 1278?
                                      >
                                      > 73 Dave
                                      >
                                      >
                                      >
                                      > _____
                                      >
                                      > From: BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com] On
                                      Behalf Of Mike
                                      > Melnik
                                      > Sent: Saturday, March 15, 2008 7:51 PM
                                      > To: BPQ32@yahoogroups. com
                                      > Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                      area.
                                      >
                                      >
                                      >
                                      >
                                      >
                                      >
                                      > Dave
                                      >
                                      >
                                      >
                                      > I will send you my port.sys I have only 1 BPQ Port allocated in
                                      WFBB to
                                      > handle all the BPQ Ports
                                      >
                                      > If you need to vary the Pacl per port this can be done in the
                                      BPQCFG.TXT
                                      > just remember to run
                                      >
                                      > The BPQCFG.EXE without BPQ/FBB running to compile the BPQCFG.TXT to
                                      the BIN.
                                      >
                                      >
                                      >
                                      > Mike Melnik
                                      > N9PMO
                                      > E-Mails Scanned By Symantec Corporate A/V
                                      >
                                      >
                                      >
                                      > -----Original Message-----
                                      > From: BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com] On
                                      Behalf Of
                                      > David Calder
                                      > Sent: Saturday, March 15, 2008 6:41 PM
                                      > To: BPQ32@yahoogroups. com
                                      > Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                      area.
                                      >
                                      >
                                      >
                                      > Wallah!!! 20 Meter port up running a 1278B in KISS and also using
                                      >
                                      > a USB to serial adapter! I have got to re-wire the cable to the
                                      >
                                      > Yaesu FT-840 I used though. Right now I have it on my FT-2000!
                                      >
                                      >
                                      >
                                      > Thanks all. Now to get the other port of it to work at the same
                                      time.
                                      >
                                      >
                                      >
                                      > Dave
                                      >
                                      >
                                      >
                                      >
                                      >
                                      >
                                      > _____
                                      >
                                      >
                                      > From: BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com] On
                                      Behalf Of K.O.
                                      > Higgs
                                      > Sent: Saturday, March 15, 2008 7:22 PM
                                      > To: BPQ32@yahoogroups. com
                                      > Subject: Re: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                      area.
                                      >
                                      > To shut down bpq, I exit fbb then right click on the bpq icon,
                                      select
                                      > bpq.exe, click on
                                      > the red X.
                                      >
                                      > K.O.
                                      >
                                      > David Calder wrote:
                                      > >
                                      > >
                                      > > It's still in the task bar. How do I shut it down? Re-booting is
                                      not
                                      > > an option as there is two DX Cluster nodes on this machine.
                                      > >
                                      > > What's the name of the process? Anyone know? I'll end it.
                                      > >
                                      > > Thanks for the fast response guys. This is great...
                                      > >
                                      > >
                                      > > -----Original Message-----
                                      > > From: BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                      > <mailto:BPQ32% 40yahoogroups. com>
                                      > > [mailto:BPQ32@ yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                      > <mailto:BPQ32% 40yahoogroups. com>] On
                                      > > Behalf Of K.O.
                                      > > Higgs
                                      > > Sent: Saturday, March 15, 2008 7:09 PM
                                      > > To: BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                      > <mailto:BPQ32% 40yahoogroups. com>
                                      > > Subject: Re: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                      area.
                                      > >
                                      > > I have had to shut down bpq and re-start it to get bpqcfg.bin
                                      loaded.
                                      > >
                                      > > 73, K.O.
                                      > >
                                      > > David Calder wrote:
                                      > > >
                                      > > > OK, I added the new KISS port to bpqcfg.txt. re-ran bpqconfig.
                                      It
                                      > > > still shows the old port. Have I been at this too long today?
                                      What an
                                      > > > I missing?
                                      > > >
                                      > > >
                                      > > ------------ --------- --------- --------- --------- --------- -
                                      > > > *From:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                      > <mailto:BPQ32% 40yahoogroups. com>
                                      > > [mailto:BPQ32@ yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                      > <mailto:BPQ32% 40yahoogroups. com>] *On
                                      > > > Behalf Of *Mike Melnik
                                      > > > *Sent:* Saturday, March 15, 2008 4:20 PM
                                      > > > *To:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                      > <mailto:BPQ32% 40yahoogroups. com>
                                      > > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for
                                      my
                                      > > > area.
                                      > > >
                                      > > > /Dave N4ZKF/
                                      > > >
                                      > > > //
                                      > > >
                                      > > > /K4GBB needs to check his V Statement in your forwarding block,
                                      he
                                      > > > is probably missing the/
                                      > > >
                                      > > > /Period Example: V .N9PMO$WPassWord$ W/
                                      > > >
                                      > > > //
                                      > > >
                                      > > > /The Period stops the echo and starts the Handshaking upon
                                      > > > connection./
                                      > > >
                                      > > > //
                                      > > >
                                      > > > /I will send you the Kiss stuff to your E-Mail Address. /
                                      > > >
                                      > > > //
                                      > > >
                                      > > > Mike Melnik
                                      > > > N9PMO
                                      > > > E-Mails Scanned By Symantec Corporate A/V
                                      > > >
                                      > > > -----Original Message-----
                                      > > > *From:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                      > <mailto:BPQ32% 40yahoogroups. com>
                                      > > [mailto:BPQ32@ yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                      > <mailto:BPQ32% 40yahoogroups. com>] *On
                                      > > > Behalf Of *David Calder
                                      > > > *Sent:* Saturday, March 15, 2008 2:35 PM
                                      > > > *To:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                      > <mailto:BPQ32% 40yahoogroups. com>
                                      > > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for
                                      my
                                      > > > area.
                                      > > >
                                      > > > Well. It's up and running just fine. I have one forward protocol
                                      > > > error with one
                                      > > >
                                      > > > BBS and the rest work fine. I would say it's not me. BPQ 410D is
                                      > > > sweet
                                      > > >
                                      > > > and working with FBB. The telnet port is working just fine.
                                      > > >
                                      > > > This is also running on a machine with my CC Cluster AND AR
                                      > > > Cluster
                                      > > >
                                      > > > DX nodes! They all are playing nicely together.
                                      > > >
                                      > > > The only thing left is the RF ports. Mike! Got an example KISS
                                      > > > port
                                      > > >
                                      > > > for 410D?? It's been years since I ran a kiss port as I had the
                                      > > > DRSI all
                                      > > >
                                      > > > the time.
                                      > > >
                                      > > > Thanks,
                                      > > >
                                      > > > 73 Dave
                                      > > >
                                      > > > n4zkf
                                      > > >
                                      > > > www.n4zkf.com <http://www.n4zkf. <http://www.n4zkf. com> com
                                      > <http://www.n4zkf. <http://www.n4zkf. com> com>>
                                      > > >
                                      > > >
                                      > > > ------------ --------- --------- --------- --------- --------- -
                                      > > > --
                                      > > >
                                      > > > *From:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                      > <mailto:BPQ32% 40yahoogroups. com>
                                      > > [mailto:BPQ32@ yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                      > <mailto:BPQ32% 40yahoogroups. com>]
                                      > > > *On Behalf Of *Mike Melnik
                                      > > > *Sent:* Saturday, March 15, 2008 12:57 PM
                                      > > > *To:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                      > <mailto:BPQ32% 40yahoogroups. com>
                                      > > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup
                                      > > > for my area.
                                      > > >
                                      > > > /Jeff/
                                      > > >
                                      > > > /After running WinFbb 7.01-35 also know as 7.01A for a couple
                                      > > > of years I finally gave up and switched/
                                      > > >
                                      > > > /To WFBB 7.00E 32 Bit with BPQ32U latest Version 410D, to many
                                      > > > BUGS in 7.01A./
                                      > > >
                                      > > > / I also use Telpac for Winlink connections, AGWPE isn't
                                      > > > needed as the BPQ32U has an AGWtoBPQ look a like/
                                      > > >
                                      > > > / for programs needing AGWPE but if you want, AGWPE can be
                                      > > > used with BPQ32U, for me AGWPE is just one/
                                      > > >
                                      > > > /less program I don't need running./
                                      > > >
                                      > > > /One problem with all of the 16 Bit WFBB 7.00E, G and I is the
                                      > > > processor usage is 100% where as the /
                                      > > >
                                      > > > /32 Bit 7.00E runs nicely at 6%, if you are running W2K or XP
                                      > > > a couple of changes need to be made/
                                      > > >
                                      > > > /to make the Maintenance (Housekeeping) program to work./
                                      > > >
                                      > > > /As to a list of active BBS'S yes you are right it is hard to
                                      > > > find, I will be more then happy to help you out/
                                      > > >
                                      > > > /With all needed Programs and Files for BPQ and WFBB./
                                      > > >
                                      > > > /BTW most Winlink Uses/Nodes are switching from TELPAC to
                                      > > > ether Packlink or RMS BETA./
                                      > > >
                                      > > > Mike Melnik
                                      > > > N9PMO
                                      > > > E-Mails Scanned By Symantec Corporate A/V
                                      > > >
                                      > > > -----Original Message-----
                                      > > > *From:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                      > <mailto:BPQ32% 40yahoogroups. com>
                                      > > [mailto:BPQ32@ yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                      > <mailto:BPQ32% 40yahoogroups. com>]
                                      > > > *On Behalf Of *Jeff
                                      > > > *Sent:* Saturday, March 15, 2008 11:32 AM
                                      > > > *To:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                      > <mailto:BPQ32% 40yahoogroups. com>
                                      > > > *Subject:* [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                      > > > area.
                                      > > >
                                      > > > Hey guys/gals,
                                      > > >
                                      > > > I'm seriously contemplating a new PBBS for my area here in
                                      > > > Northern
                                      > > > Kentucky and have a few questions maybe this group can help
                                      > > > answer for me.
                                      > > >
                                      > > > Is there a good list of current PBBS's out there for the USA?
                                      I've
                                      > > > looked around some on the net, but I haven't really found a
                                      > > > one-stop
                                      > > > listing. I find some single state lists and most of them are
                                      > > > really
                                      > > > old lists.
                                      > > >
                                      > > > I've lightly perused over some of the documents out there, BTW
                                      the
                                      > > > best are found here on this group. I gather there are some bugs
                                      in
                                      > > > FBB when used with BPQ32? Just curious what these are in brief?
                                      > > >
                                      > > > Anyone on the list willing to give me some do's, dont's, and
                                      > > > things to
                                      > > > watch out for with BPQ32 and WinFBB?
                                      > > >
                                      > > > Latest version of WinFBB (which looks to be 7.00i) good to
                                      > > > use, or is
                                      > > > one of the prior versions better? Sometimes the latest and
                                      > > > greatest
                                      > > > isn't always the greatest ;-)
                                      > > >
                                      > > > I gather the Win32 WinFBB is pretty much Alpha software and
                                      > > > the Win16
                                      > > > stuff is much more stable?
                                      > > >
                                      > > > Can I, or better stated, has anyone ran WinFBB and BPQ32
                                      alongside
                                      > > > WinLink on the same TNC/Radio? AGW the route to go for this if
                                      > > > it's
                                      > > > possible? Would kind of like to offer a WinLink telpac station
                                      for
                                      > > > the area, but maximize existing equipment if possible.
                                      > > >
                                      > > > I'd probably have to go with a VHF/UHF local port and forward
                                      > > > via the
                                      > > > internet. Pros and cons of this? How would I go about, or who
                                      do I
                                      > > > contact, for forwarding arrangements and so forth?
                                      > > >
                                      > > > Thanks in advance for your patience with my questions!
                                      > > >
                                      > > > 73
                                      > > > Jeff
                                      > > > WA4ZKO
                                      > > >
                                      > > >
                                      > >
                                      > > --
                                      > >
                                      > > K.O. Higgs
                                      > > n0kfq@centurytel. <mailto:n0kfq% 40centurytel. net> net
                                      > <mailto:n0kfq% 40centurytel. net>
                                      > >
                                      > > ------------ --------- --------- ------
                                      > >
                                      > > Yahoo! Groups Links
                                      > >
                                      > >
                                      >
                                      > --
                                      >
                                      > K.O. Higgs
                                      > n0kfq@centurytel. <mailto:n0kfq% 40centurytel. net> net
                                      >

                                    • John Wiseman
                                      I may be wrong, but I think that the 1278 is a single port TNC with the the ability to select an HF or VHF modem (like the TNC220), not a dual port TNC with
                                      Message 18 of 21 , Mar 16, 2008
                                      • 0 Attachment
                                        I may be wrong, but I think that the 1278 is a single port TNC with the the ability to select an HF or VHF modem (like the TNC220), not a dual port TNC with separate HF and VHF channels, like the KAM.
                                         
                                        Regards
                                        John
                                         
                                         
                                        -----Original Message-----
                                        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com]On Behalf Of David Calder
                                        Sent: 16 March 2008 13:30
                                        To: BPQ32@yahoogroups.com
                                        Subject: RE: [BPQ32] Re: Contemplating a new BPQ/WinFBB setup for my area.

                                        Been running BPQ for 20 years Karl. I understand the compile thing.
                                        I will send it though. Maybe I'm missing something.
                                         
                                        It come up and compiles with two ports. Shows two ports. I can
                                        connect to it thru the bbs or BPQ terminal. Pick either port 1 or
                                        2, it doesn't matter. It still uses the same port on the TNC.
                                         
                                         
                                         
                                        Thanks for the help.
                                         
                                        73 Dave
                                         


                                        From: BPQ32@yahoogroups. com [mailto:BPQ32@ yahoogroups. com] On Behalf Of Karl
                                        Sent: Sunday, March 16, 2008 9:13 AM
                                        To: BPQ32@yahoogroups. com
                                        Subject: [BPQ32] Re: Contemplating a new BPQ/WinFBB setup for my area.

                                        Dave,

                                        I have been watching your messages about using two ports with BPQ. I
                                        run an old KAM with BPQ and both ports work just as they are suppose
                                        to. If you would send your bpqcfg.txt file to kb8dm@kb8dm. com I will
                                        take a look at it and compare it to my configuration file.

                                        Again as always your must complile the txt file into bin.

                                        Karl

                                        --- In BPQ32@yahoogroups. com, "David Calder" <n4zkf@...> wrote:
                                        >
                                        > OK, here is my only snag. Which isn't that big a deal it's just
                                        going to
                                        > make me use two TNC's when I was hoping to do it with one.
                                        >
                                        > I can't seem to use the "other" radio port in my 1278. I added a
                                        second
                                        > port in bpqcfg.txt file changed the "channel" from A like port one
                                        to "B"
                                        > to tell it to use the second radio port of the 1278. It doesn't. It
                                        still
                                        > uses
                                        > the same radio port. The 300 HF baud port.
                                        >
                                        > This is all I had to do with the DRSI cards was change the channel.
                                        I
                                        > guess it doesn't work for a 1278?
                                        >
                                        > 73 Dave
                                        >
                                        >
                                        >
                                        > _____
                                        >
                                        > From: BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com] On
                                        Behalf Of Mike
                                        > Melnik
                                        > Sent: Saturday, March 15, 2008 7:51 PM
                                        > To: BPQ32@yahoogroups. com
                                        > Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                        area.
                                        >
                                        >
                                        >
                                        >
                                        >
                                        >
                                        > Dave
                                        >
                                        >
                                        >
                                        > I will send you my port.sys I have only 1 BPQ Port allocated in
                                        WFBB to
                                        > handle all the BPQ Ports
                                        >
                                        > If you need to vary the Pacl per port this can be done in the
                                        BPQCFG.TXT
                                        > just remember to run
                                        >
                                        > The BPQCFG.EXE without BPQ/FBB running to compile the BPQCFG.TXT to
                                        the BIN.
                                        >
                                        >
                                        >
                                        > Mike Melnik
                                        > N9PMO
                                        > E-Mails Scanned By Symantec Corporate A/V
                                        >
                                        >
                                        >
                                        > -----Original Message-----
                                        > From: BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com] On
                                        Behalf Of
                                        > David Calder
                                        > Sent: Saturday, March 15, 2008 6:41 PM
                                        > To: BPQ32@yahoogroups. com
                                        > Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                        area.
                                        >
                                        >
                                        >
                                        > Wallah!!! 20 Meter port up running a 1278B in KISS and also using
                                        >
                                        > a USB to serial adapter! I have got to re-wire the cable to the
                                        >
                                        > Yaesu FT-840 I used though. Right now I have it on my FT-2000!
                                        >
                                        >
                                        >
                                        > Thanks all. Now to get the other port of it to work at the same
                                        time.
                                        >
                                        >
                                        >
                                        > Dave
                                        >
                                        >
                                        >
                                        >
                                        >
                                        >
                                        > _____
                                        >
                                        >
                                        > From: BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com] On
                                        Behalf Of K.O.
                                        > Higgs
                                        > Sent: Saturday, March 15, 2008 7:22 PM
                                        > To: BPQ32@yahoogroups. com
                                        > Subject: Re: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                        area.
                                        >
                                        > To shut down bpq, I exit fbb then right click on the bpq icon,
                                        select
                                        > bpq.exe, click on
                                        > the red X.
                                        >
                                        > K.O.
                                        >
                                        > David Calder wrote:
                                        > >
                                        > >
                                        > > It's still in the task bar. How do I shut it down? Re-booting is
                                        not
                                        > > an option as there is two DX Cluster nodes on this machine.
                                        > >
                                        > > What's the name of the process? Anyone know? I'll end it.
                                        > >
                                        > > Thanks for the fast response guys. This is great...
                                        > >
                                        > >
                                        > > -----Original Message-----
                                        > > From: BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                        > <mailto:BPQ32% 40yahoogroups. com>
                                        > > [mailto:BPQ32@ yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                        > <mailto:BPQ32% 40yahoogroups. com>] On
                                        > > Behalf Of K.O.
                                        > > Higgs
                                        > > Sent: Saturday, March 15, 2008 7:09 PM
                                        > > To: BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                        > <mailto:BPQ32% 40yahoogroups. com>
                                        > > Subject: Re: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                        area.
                                        > >
                                        > > I have had to shut down bpq and re-start it to get bpqcfg.bin
                                        loaded.
                                        > >
                                        > > 73, K.O.
                                        > >
                                        > > David Calder wrote:
                                        > > >
                                        > > > OK, I added the new KISS port to bpqcfg.txt. re-ran bpqconfig.
                                        It
                                        > > > still shows the old port. Have I been at this too long today?
                                        What an
                                        > > > I missing?
                                        > > >
                                        > > >
                                        > > ------------ --------- --------- --------- --------- --------- -
                                        > > > *From:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                        > <mailto:BPQ32% 40yahoogroups. com>
                                        > > [mailto:BPQ32@ yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                        > <mailto:BPQ32% 40yahoogroups. com>] *On
                                        > > > Behalf Of *Mike Melnik
                                        > > > *Sent:* Saturday, March 15, 2008 4:20 PM
                                        > > > *To:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                        > <mailto:BPQ32% 40yahoogroups. com>
                                        > > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for
                                        my
                                        > > > area.
                                        > > >
                                        > > > /Dave N4ZKF/
                                        > > >
                                        > > > //
                                        > > >
                                        > > > /K4GBB needs to check his V Statement in your forwarding block,
                                        he
                                        > > > is probably missing the/
                                        > > >
                                        > > > /Period Example: V .N9PMO$WPassWord$ W/
                                        > > >
                                        > > > //
                                        > > >
                                        > > > /The Period stops the echo and starts the Handshaking upon
                                        > > > connection./
                                        > > >
                                        > > > //
                                        > > >
                                        > > > /I will send you the Kiss stuff to your E-Mail Address. /
                                        > > >
                                        > > > //
                                        > > >
                                        > > > Mike Melnik
                                        > > > N9PMO
                                        > > > E-Mails Scanned By Symantec Corporate A/V
                                        > > >
                                        > > > -----Original Message-----
                                        > > > *From:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                        > <mailto:BPQ32% 40yahoogroups. com>
                                        > > [mailto:BPQ32@ yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                        > <mailto:BPQ32% 40yahoogroups. com>] *On
                                        > > > Behalf Of *David Calder
                                        > > > *Sent:* Saturday, March 15, 2008 2:35 PM
                                        > > > *To:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                        > <mailto:BPQ32% 40yahoogroups. com>
                                        > > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for
                                        my
                                        > > > area.
                                        > > >
                                        > > > Well. It's up and running just fine. I have one forward protocol
                                        > > > error with one
                                        > > >
                                        > > > BBS and the rest work fine. I would say it's not me. BPQ 410D is
                                        > > > sweet
                                        > > >
                                        > > > and working with FBB. The telnet port is working just fine.
                                        > > >
                                        > > > This is also running on a machine with my CC Cluster AND AR
                                        > > > Cluster
                                        > > >
                                        > > > DX nodes! They all are playing nicely together.
                                        > > >
                                        > > > The only thing left is the RF ports. Mike! Got an example KISS
                                        > > > port
                                        > > >
                                        > > > for 410D?? It's been years since I ran a kiss port as I had the
                                        > > > DRSI all
                                        > > >
                                        > > > the time.
                                        > > >
                                        > > > Thanks,
                                        > > >
                                        > > > 73 Dave
                                        > > >
                                        > > > n4zkf
                                        > > >
                                        > > > www.n4zkf.com <http://www.n4zkf. <http://www.n4zkf. com> com
                                        > <http://www.n4zkf. <http://www.n4zkf. com> com>>
                                        > > >
                                        > > >
                                        > > > ------------ --------- --------- --------- --------- --------- -
                                        > > > --
                                        > > >
                                        > > > *From:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                        > <mailto:BPQ32% 40yahoogroups. com>
                                        > > [mailto:BPQ32@ yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                        > <mailto:BPQ32% 40yahoogroups. com>]
                                        > > > *On Behalf Of *Mike Melnik
                                        > > > *Sent:* Saturday, March 15, 2008 12:57 PM
                                        > > > *To:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                        > <mailto:BPQ32% 40yahoogroups. com>
                                        > > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup
                                        > > > for my area.
                                        > > >
                                        > > > /Jeff/
                                        > > >
                                        > > > /After running WinFbb 7.01-35 also know as 7.01A for a couple
                                        > > > of years I finally gave up and switched/
                                        > > >
                                        > > > /To WFBB 7.00E 32 Bit with BPQ32U latest Version 410D, to many
                                        > > > BUGS in 7.01A./
                                        > > >
                                        > > > / I also use Telpac for Winlink connections, AGWPE isn't
                                        > > > needed as the BPQ32U has an AGWtoBPQ look a like/
                                        > > >
                                        > > > / for programs needing AGWPE but if you want, AGWPE can be
                                        > > > used with BPQ32U, for me AGWPE is just one/
                                        > > >
                                        > > > /less program I don't need running./
                                        > > >
                                        > > > /One problem with all of the 16 Bit WFBB 7.00E, G and I is the
                                        > > > processor usage is 100% where as the /
                                        > > >
                                        > > > /32 Bit 7.00E runs nicely at 6%, if you are running W2K or XP
                                        > > > a couple of changes need to be made/
                                        > > >
                                        > > > /to make the Maintenance (Housekeeping) program to work./
                                        > > >
                                        > > > /As to a list of active BBS'S yes you are right it is hard to
                                        > > > find, I will be more then happy to help you out/
                                        > > >
                                        > > > /With all needed Programs and Files for BPQ and WFBB./
                                        > > >
                                        > > > /BTW most Winlink Uses/Nodes are switching from TELPAC to
                                        > > > ether Packlink or RMS BETA./
                                        > > >
                                        > > > Mike Melnik
                                        > > > N9PMO
                                        > > > E-Mails Scanned By Symantec Corporate A/V
                                        > > >
                                        > > > -----Original Message-----
                                        > > > *From:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                        > <mailto:BPQ32% 40yahoogroups. com>
                                        > > [mailto:BPQ32@ yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                        > <mailto:BPQ32% 40yahoogroups. com>]
                                        > > > *On Behalf Of *Jeff
                                        > > > *Sent:* Saturday, March 15, 2008 11:32 AM
                                        > > > *To:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                        > <mailto:BPQ32% 40yahoogroups. com>
                                        > > > *Subject:* [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                        > > > area.
                                        > > >
                                        > > > Hey guys/gals,
                                        > > >
                                        > > > I'm seriously contemplating a new PBBS for my area here in
                                        > > > Northern
                                        > > > Kentucky and have a few questions maybe this group can help
                                        > > > answer for me.
                                        > > >
                                        > > > Is there a good list of current PBBS's out there for the USA?
                                        I've
                                        > > > looked around some on the net, but I haven't really found a
                                        > > > one-stop
                                        > > > listing. I find some single state lists and most of them are
                                        > > > really
                                        > > > old lists.
                                        > > >
                                        > > > I've lightly perused over some of the documents out there, BTW
                                        the
                                        > > > best are found here on this group. I gather there are some bugs
                                        in
                                        > > > FBB when used with BPQ32? Just curious what these are in brief?
                                        > > >
                                        > > > Anyone on the list willing to give me some do's, dont's, and
                                        > > > things to
                                        > > > watch out for with BPQ32 and WinFBB?
                                        > > >
                                        > > > Latest version of WinFBB (which looks to be 7.00i) good to
                                        > > > use, or is
                                        > > > one of the prior versions better? Sometimes the latest and
                                        > > > greatest
                                        > > > isn't always the greatest ;-)
                                        > > >
                                        > > > I gather the Win32 WinFBB is pretty much Alpha software and
                                        > > > the Win16
                                        > > > stuff is much more stable?
                                        > > >
                                        > > > Can I, or better stated, has anyone ran WinFBB and BPQ32
                                        alongside
                                        > > > WinLink on the same TNC/Radio? AGW the route to go for this if
                                        > > > it's
                                        > > > possible? Would kind of like to offer a WinLink telpac station
                                        for
                                        > > > the area, but maximize existing equipment if possible.
                                        > > >
                                        > > > I'd probably have to go with a VHF/UHF local port and forward
                                        > > > via the
                                        > > > internet. Pros and cons of this? How would I go about, or who
                                        do I
                                        > > > contact, for forwarding arrangements and so forth?
                                        > > >
                                        > > > Thanks in advance for your patience with my questions!
                                        > > >
                                        > > > 73
                                        > > > Jeff
                                        > > > WA4ZKO
                                        > > >
                                        > > >
                                        > >
                                        > > --
                                        > >
                                        > > K.O. Higgs
                                        > > n0kfq@centurytel. <mailto:n0kfq% 40centurytel. net> net
                                        > <mailto:n0kfq% 40centurytel. net>
                                        > >
                                        > > ------------ --------- --------- ------
                                        > >
                                        > > Yahoo! Groups Links
                                        > >
                                        > >
                                        >
                                        > --
                                        >
                                        > K.O. Higgs
                                        > n0kfq@centurytel. <mailto:n0kfq% 40centurytel. net> net
                                        >

                                      • David Calder
                                        That would explain it John. Thanks. I guess I need to fire up the PK900. Dave _____ From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                        Message 19 of 21 , Mar 16, 2008
                                        • 0 Attachment
                                          That would explain it John. Thanks. I guess I need to fire up the PK900.
                                           
                                          Dave
                                           


                                          From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of John Wiseman
                                          Sent: Sunday, March 16, 2008 9:39 AM
                                          To: BPQ32@yahoogroups.com
                                          Subject: RE: [BPQ32] Re: Contemplating a new BPQ/WinFBB setup for my area.

                                          I may be wrong, but I think that the 1278 is a single port TNC with the the ability to select an HF or VHF modem (like the TNC220), not a dual port TNC with separate HF and VHF channels, like the KAM.
                                           
                                          Regards
                                          John
                                           
                                           
                                          -----Original Message-----
                                          From: BPQ32@yahoogroups. com [mailto:BPQ32@ yahoogroups. com]On Behalf Of David Calder
                                          Sent: 16 March 2008 13:30
                                          To: BPQ32@yahoogroups. com
                                          Subject: RE: [BPQ32] Re: Contemplating a new BPQ/WinFBB setup for my area.

                                          Been running BPQ for 20 years Karl. I understand the compile thing.
                                          I will send it though. Maybe I'm missing something.
                                           
                                          It come up and compiles with two ports. Shows two ports. I can
                                          connect to it thru the bbs or BPQ terminal. Pick either port 1 or
                                          2, it doesn't matter. It still uses the same port on the TNC.
                                           
                                           
                                           
                                          Thanks for the help.
                                           
                                          73 Dave
                                           


                                          From: BPQ32@yahoogroups. com [mailto:BPQ32@ yahoogroups. com] On Behalf Of Karl
                                          Sent: Sunday, March 16, 2008 9:13 AM
                                          To: BPQ32@yahoogroups. com
                                          Subject: [BPQ32] Re: Contemplating a new BPQ/WinFBB setup for my area.

                                          Dave,

                                          I have been watching your messages about using two ports with BPQ. I
                                          run an old KAM with BPQ and both ports work just as they are suppose
                                          to. If you would send your bpqcfg.txt file to kb8dm@kb8dm. com I will
                                          take a look at it and compare it to my configuration file.

                                          Again as always your must complile the txt file into bin.

                                          Karl

                                          --- In BPQ32@yahoogroups. com, "David Calder" <n4zkf@...> wrote:
                                          >
                                          > OK, here is my only snag. Which isn't that big a deal it's just
                                          going to
                                          > make me use two TNC's when I was hoping to do it with one.
                                          >
                                          > I can't seem to use the "other" radio port in my 1278. I added a
                                          second
                                          > port in bpqcfg.txt file changed the "channel" from A like port one
                                          to "B"
                                          > to tell it to use the second radio port of the 1278. It doesn't. It
                                          still
                                          > uses
                                          > the same radio port. The 300 HF baud port.
                                          >
                                          > This is all I had to do with the DRSI cards was change the channel.
                                          I
                                          > guess it doesn't work for a 1278?
                                          >
                                          > 73 Dave
                                          >
                                          >
                                          >
                                          > _____
                                          >
                                          > From: BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com] On
                                          Behalf Of Mike
                                          > Melnik
                                          > Sent: Saturday, March 15, 2008 7:51 PM
                                          > To: BPQ32@yahoogroups. com
                                          > Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                          area.
                                          >
                                          >
                                          >
                                          >
                                          >
                                          >
                                          > Dave
                                          >
                                          >
                                          >
                                          > I will send you my port.sys I have only 1 BPQ Port allocated in
                                          WFBB to
                                          > handle all the BPQ Ports
                                          >
                                          > If you need to vary the Pacl per port this can be done in the
                                          BPQCFG.TXT
                                          > just remember to run
                                          >
                                          > The BPQCFG.EXE without BPQ/FBB running to compile the BPQCFG.TXT to
                                          the BIN.
                                          >
                                          >
                                          >
                                          > Mike Melnik
                                          > N9PMO
                                          > E-Mails Scanned By Symantec Corporate A/V
                                          >
                                          >
                                          >
                                          > -----Original Message-----
                                          > From: BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com] On
                                          Behalf Of
                                          > David Calder
                                          > Sent: Saturday, March 15, 2008 6:41 PM
                                          > To: BPQ32@yahoogroups. com
                                          > Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                          area.
                                          >
                                          >
                                          >
                                          > Wallah!!! 20 Meter port up running a 1278B in KISS and also using
                                          >
                                          > a USB to serial adapter! I have got to re-wire the cable to the
                                          >
                                          > Yaesu FT-840 I used though. Right now I have it on my FT-2000!
                                          >
                                          >
                                          >
                                          > Thanks all. Now to get the other port of it to work at the same
                                          time.
                                          >
                                          >
                                          >
                                          > Dave
                                          >
                                          >
                                          >
                                          >
                                          >
                                          >
                                          > _____
                                          >
                                          >
                                          > From: BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com] On
                                          Behalf Of K.O.
                                          > Higgs
                                          > Sent: Saturday, March 15, 2008 7:22 PM
                                          > To: BPQ32@yahoogroups. com
                                          > Subject: Re: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                          area.
                                          >
                                          > To shut down bpq, I exit fbb then right click on the bpq icon,
                                          select
                                          > bpq.exe, click on
                                          > the red X.
                                          >
                                          > K.O.
                                          >
                                          > David Calder wrote:
                                          > >
                                          > >
                                          > > It's still in the task bar. How do I shut it down? Re-booting is
                                          not
                                          > > an option as there is two DX Cluster nodes on this machine.
                                          > >
                                          > > What's the name of the process? Anyone know? I'll end it.
                                          > >
                                          > > Thanks for the fast response guys. This is great...
                                          > >
                                          > >
                                          > > -----Original Message-----
                                          > > From: BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                          > <mailto:BPQ32% 40yahoogroups. com>
                                          > > [mailto:BPQ32@ yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                          > <mailto:BPQ32% 40yahoogroups. com>] On
                                          > > Behalf Of K.O.
                                          > > Higgs
                                          > > Sent: Saturday, March 15, 2008 7:09 PM
                                          > > To: BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                          > <mailto:BPQ32% 40yahoogroups. com>
                                          > > Subject: Re: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                          area.
                                          > >
                                          > > I have had to shut down bpq and re-start it to get bpqcfg.bin
                                          loaded.
                                          > >
                                          > > 73, K.O.
                                          > >
                                          > > David Calder wrote:
                                          > > >
                                          > > > OK, I added the new KISS port to bpqcfg.txt. re-ran bpqconfig.
                                          It
                                          > > > still shows the old port. Have I been at this too long today?
                                          What an
                                          > > > I missing?
                                          > > >
                                          > > >
                                          > > ------------ --------- --------- --------- --------- --------- -
                                          > > > *From:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                          > <mailto:BPQ32% 40yahoogroups. com>
                                          > > [mailto:BPQ32@ yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                          > <mailto:BPQ32% 40yahoogroups. com>] *On
                                          > > > Behalf Of *Mike Melnik
                                          > > > *Sent:* Saturday, March 15, 2008 4:20 PM
                                          > > > *To:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                          > <mailto:BPQ32% 40yahoogroups. com>
                                          > > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for
                                          my
                                          > > > area.
                                          > > >
                                          > > > /Dave N4ZKF/
                                          > > >
                                          > > > //
                                          > > >
                                          > > > /K4GBB needs to check his V Statement in your forwarding block,
                                          he
                                          > > > is probably missing the/
                                          > > >
                                          > > > /Period Example: V .N9PMO$WPassWord$ W/
                                          > > >
                                          > > > //
                                          > > >
                                          > > > /The Period stops the echo and starts the Handshaking upon
                                          > > > connection./
                                          > > >
                                          > > > //
                                          > > >
                                          > > > /I will send you the Kiss stuff to your E-Mail Address. /
                                          > > >
                                          > > > //
                                          > > >
                                          > > > Mike Melnik
                                          > > > N9PMO
                                          > > > E-Mails Scanned By Symantec Corporate A/V
                                          > > >
                                          > > > -----Original Message-----
                                          > > > *From:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                          > <mailto:BPQ32% 40yahoogroups. com>
                                          > > [mailto:BPQ32@ yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                          > <mailto:BPQ32% 40yahoogroups. com>] *On
                                          > > > Behalf Of *David Calder
                                          > > > *Sent:* Saturday, March 15, 2008 2:35 PM
                                          > > > *To:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                          > <mailto:BPQ32% 40yahoogroups. com>
                                          > > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for
                                          my
                                          > > > area.
                                          > > >
                                          > > > Well. It's up and running just fine. I have one forward protocol
                                          > > > error with one
                                          > > >
                                          > > > BBS and the rest work fine. I would say it's not me. BPQ 410D is
                                          > > > sweet
                                          > > >
                                          > > > and working with FBB. The telnet port is working just fine.
                                          > > >
                                          > > > This is also running on a machine with my CC Cluster AND AR
                                          > > > Cluster
                                          > > >
                                          > > > DX nodes! They all are playing nicely together.
                                          > > >
                                          > > > The only thing left is the RF ports. Mike! Got an example KISS
                                          > > > port
                                          > > >
                                          > > > for 410D?? It's been years since I ran a kiss port as I had the
                                          > > > DRSI all
                                          > > >
                                          > > > the time.
                                          > > >
                                          > > > Thanks,
                                          > > >
                                          > > > 73 Dave
                                          > > >
                                          > > > n4zkf
                                          > > >
                                          > > > www.n4zkf.com <http://www.n4zkf. <http://www.n4zkf. com> com
                                          > <http://www.n4zkf. <http://www.n4zkf. com> com>>
                                          > > >
                                          > > >
                                          > > > ------------ --------- --------- --------- --------- --------- -
                                          > > > --
                                          > > >
                                          > > > *From:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                          > <mailto:BPQ32% 40yahoogroups. com>
                                          > > [mailto:BPQ32@ yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                          > <mailto:BPQ32% 40yahoogroups. com>]
                                          > > > *On Behalf Of *Mike Melnik
                                          > > > *Sent:* Saturday, March 15, 2008 12:57 PM
                                          > > > *To:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                          > <mailto:BPQ32% 40yahoogroups. com>
                                          > > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup
                                          > > > for my area.
                                          > > >
                                          > > > /Jeff/
                                          > > >
                                          > > > /After running WinFbb 7.01-35 also know as 7.01A for a couple
                                          > > > of years I finally gave up and switched/
                                          > > >
                                          > > > /To WFBB 7.00E 32 Bit with BPQ32U latest Version 410D, to many
                                          > > > BUGS in 7.01A./
                                          > > >
                                          > > > / I also use Telpac for Winlink connections, AGWPE isn't
                                          > > > needed as the BPQ32U has an AGWtoBPQ look a like/
                                          > > >
                                          > > > / for programs needing AGWPE but if you want, AGWPE can be
                                          > > > used with BPQ32U, for me AGWPE is just one/
                                          > > >
                                          > > > /less program I don't need running./
                                          > > >
                                          > > > /One problem with all of the 16 Bit WFBB 7.00E, G and I is the
                                          > > > processor usage is 100% where as the /
                                          > > >
                                          > > > /32 Bit 7.00E runs nicely at 6%, if you are running W2K or XP
                                          > > > a couple of changes need to be made/
                                          > > >
                                          > > > /to make the Maintenance (Housekeeping) program to work./
                                          > > >
                                          > > > /As to a list of active BBS'S yes you are right it is hard to
                                          > > > find, I will be more then happy to help you out/
                                          > > >
                                          > > > /With all needed Programs and Files for BPQ and WFBB./
                                          > > >
                                          > > > /BTW most Winlink Uses/Nodes are switching from TELPAC to
                                          > > > ether Packlink or RMS BETA./
                                          > > >
                                          > > > Mike Melnik
                                          > > > N9PMO
                                          > > > E-Mails Scanned By Symantec Corporate A/V
                                          > > >
                                          > > > -----Original Message-----
                                          > > > *From:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                          > <mailto:BPQ32% 40yahoogroups. com>
                                          > > [mailto:BPQ32@ yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                          > <mailto:BPQ32% 40yahoogroups. com>]
                                          > > > *On Behalf Of *Jeff
                                          > > > *Sent:* Saturday, March 15, 2008 11:32 AM
                                          > > > *To:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                          > <mailto:BPQ32% 40yahoogroups. com>
                                          > > > *Subject:* [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                          > > > area.
                                          > > >
                                          > > > Hey guys/gals,
                                          > > >
                                          > > > I'm seriously contemplating a new PBBS for my area here in
                                          > > > Northern
                                          > > > Kentucky and have a few questions maybe this group can help
                                          > > > answer for me.
                                          > > >
                                          > > > Is there a good list of current PBBS's out there for the USA?
                                          I've
                                          > > > looked around some on the net, but I haven't really found a
                                          > > > one-stop
                                          > > > listing. I find some single state lists and most of them are
                                          > > > really
                                          > > > old lists.
                                          > > >
                                          > > > I've lightly perused over some of the documents out there, BTW
                                          the
                                          > > > best are found here on this group. I gather there are some bugs
                                          in
                                          > > > FBB when used with BPQ32? Just curious what these are in brief?
                                          > > >
                                          > > > Anyone on the list willing to give me some do's, dont's, and
                                          > > > things to
                                          > > > watch out for with BPQ32 and WinFBB?
                                          > > >
                                          > > > Latest version of WinFBB (which looks to be 7.00i) good to
                                          > > > use, or is
                                          > > > one of the prior versions better? Sometimes the latest and
                                          > > > greatest
                                          > > > isn't always the greatest ;-)
                                          > > >
                                          > > > I gather the Win32 WinFBB is pretty much Alpha software and
                                          > > > the Win16
                                          > > > stuff is much more stable?
                                          > > >
                                          > > > Can I, or better stated, has anyone ran WinFBB and BPQ32
                                          alongside
                                          > > > WinLink on the same TNC/Radio? AGW the route to go for this if
                                          > > > it's
                                          > > > possible? Would kind of like to offer a WinLink telpac station
                                          for
                                          > > > the area, but maximize existing equipment if possible.
                                          > > >
                                          > > > I'd probably have to go with a VHF/UHF local port and forward
                                          > > > via the
                                          > > > internet. Pros and cons of this? How would I go about, or who
                                          do I
                                          > > > contact, for forwarding arrangements and so forth?
                                          > > >
                                          > > > Thanks in advance for your patience with my questions!
                                          > > >
                                          > > > 73
                                          > > > Jeff
                                          > > > WA4ZKO
                                          > > >
                                          > > >
                                          > >
                                          > > --
                                          > >
                                          > > K.O. Higgs
                                          > > n0kfq@centurytel. <mailto:n0kfq% 40centurytel. net> net
                                          > <mailto:n0kfq% 40centurytel. net>
                                          > >
                                          > > ------------ --------- --------- ------
                                          > >
                                          > > Yahoo! Groups Links
                                          > >
                                          > >
                                          >
                                          > --
                                          >
                                          > K.O. Higgs
                                          > n0kfq@centurytel. <mailto:n0kfq% 40centurytel. net> net
                                          >

                                        • David Calder
                                          Karl. Thanks for the offer! It was the 1278. PK900 with two separate modems, did the trick. Thanks to ALL for the help the last two days. After 20 years of
                                          Message 20 of 21 , Mar 16, 2008
                                          • 0 Attachment
                                            Karl. Thanks for the offer! It was the 1278. PK900 with two "separate"
                                            modems, did the trick.
                                             
                                            Thanks to ALL for the help the last two days. After 20 years of
                                            DOS FBB-BPQ and 16 bit FBB-BPQ, I'm finally in the 21st century.
                                             
                                            I'm sure going to miss those DRSI cards and external HF modems
                                            though.
                                             
                                            73 Dave
                                             


                                            From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Karl
                                            Sent: Sunday, March 16, 2008 9:13 AM
                                            To: BPQ32@yahoogroups.com
                                            Subject: [BPQ32] Re: Contemplating a new BPQ/WinFBB setup for my area.

                                            Dave,

                                            I have been watching your messages about using two ports with BPQ. I
                                            run an old KAM with BPQ and both ports work just as they are suppose
                                            to. If you would send your bpqcfg.txt file to kb8dm@kb8dm. com I will
                                            take a look at it and compare it to my configuration file.

                                            Again as always your must complile the txt file into bin.

                                            Karl

                                            --- In BPQ32@yahoogroups. com, "David Calder" <n4zkf@...> wrote:
                                            >
                                            > OK, here is my only snag. Which isn't that big a deal it's just
                                            going to
                                            > make me use two TNC's when I was hoping to do it with one.
                                            >
                                            > I can't seem to use the "other" radio port in my 1278. I added a
                                            second
                                            > port in bpqcfg.txt file changed the "channel" from A like port one
                                            to "B"
                                            > to tell it to use the second radio port of the 1278. It doesn't. It
                                            still
                                            > uses
                                            > the same radio port. The 300 HF baud port.
                                            >
                                            > This is all I had to do with the DRSI cards was change the channel.
                                            I
                                            > guess it doesn't work for a 1278?
                                            >
                                            > 73 Dave
                                            >
                                            >
                                            >
                                            > _____
                                            >
                                            > From: BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com] On
                                            Behalf Of Mike
                                            > Melnik
                                            > Sent: Saturday, March 15, 2008 7:51 PM
                                            > To: BPQ32@yahoogroups. com
                                            > Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                            area.
                                            >
                                            >
                                            >
                                            >
                                            >
                                            >
                                            > Dave
                                            >
                                            >
                                            >
                                            > I will send you my port.sys I have only 1 BPQ Port allocated in
                                            WFBB to
                                            > handle all the BPQ Ports
                                            >
                                            > If you need to vary the Pacl per port this can be done in the
                                            BPQCFG.TXT
                                            > just remember to run
                                            >
                                            > The BPQCFG.EXE without BPQ/FBB running to compile the BPQCFG.TXT to
                                            the BIN.
                                            >
                                            >
                                            >
                                            > Mike Melnik
                                            > N9PMO
                                            > E-Mails Scanned By Symantec Corporate A/V
                                            >
                                            >
                                            >
                                            > -----Original Message-----
                                            > From: BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com] On
                                            Behalf Of
                                            > David Calder
                                            > Sent: Saturday, March 15, 2008 6:41 PM
                                            > To: BPQ32@yahoogroups. com
                                            > Subject: RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                            area.
                                            >
                                            >
                                            >
                                            > Wallah!!! 20 Meter port up running a 1278B in KISS and also using
                                            >
                                            > a USB to serial adapter! I have got to re-wire the cable to the
                                            >
                                            > Yaesu FT-840 I used though. Right now I have it on my FT-2000!
                                            >
                                            >
                                            >
                                            > Thanks all. Now to get the other port of it to work at the same
                                            time.
                                            >
                                            >
                                            >
                                            > Dave
                                            >
                                            >
                                            >
                                            >
                                            >
                                            >
                                            > _____
                                            >
                                            >
                                            > From: BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com] On
                                            Behalf Of K.O.
                                            > Higgs
                                            > Sent: Saturday, March 15, 2008 7:22 PM
                                            > To: BPQ32@yahoogroups. com
                                            > Subject: Re: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                            area.
                                            >
                                            > To shut down bpq, I exit fbb then right click on the bpq icon,
                                            select
                                            > bpq.exe, click on
                                            > the red X.
                                            >
                                            > K.O.
                                            >
                                            > David Calder wrote:
                                            > >
                                            > >
                                            > > It's still in the task bar. How do I shut it down? Re-booting is
                                            not
                                            > > an option as there is two DX Cluster nodes on this machine.
                                            > >
                                            > > What's the name of the process? Anyone know? I'll end it.
                                            > >
                                            > > Thanks for the fast response guys. This is great...
                                            > >
                                            > >
                                            > > -----Original Message-----
                                            > > From: BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                            > <mailto:BPQ32% 40yahoogroups. com>
                                            > > [mailto:BPQ32@ yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                            > <mailto:BPQ32% 40yahoogroups. com>] On
                                            > > Behalf Of K.O.
                                            > > Higgs
                                            > > Sent: Saturday, March 15, 2008 7:09 PM
                                            > > To: BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                            > <mailto:BPQ32% 40yahoogroups. com>
                                            > > Subject: Re: [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                            area.
                                            > >
                                            > > I have had to shut down bpq and re-start it to get bpqcfg.bin
                                            loaded.
                                            > >
                                            > > 73, K.O.
                                            > >
                                            > > David Calder wrote:
                                            > > >
                                            > > > OK, I added the new KISS port to bpqcfg.txt. re-ran bpqconfig.
                                            It
                                            > > > still shows the old port. Have I been at this too long today?
                                            What an
                                            > > > I missing?
                                            > > >
                                            > > >
                                            > > ------------ --------- --------- --------- --------- --------- -
                                            > > > *From:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                            > <mailto:BPQ32% 40yahoogroups. com>
                                            > > [mailto:BPQ32@ yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                            > <mailto:BPQ32% 40yahoogroups. com>] *On
                                            > > > Behalf Of *Mike Melnik
                                            > > > *Sent:* Saturday, March 15, 2008 4:20 PM
                                            > > > *To:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                            > <mailto:BPQ32% 40yahoogroups. com>
                                            > > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for
                                            my
                                            > > > area.
                                            > > >
                                            > > > /Dave N4ZKF/
                                            > > >
                                            > > > //
                                            > > >
                                            > > > /K4GBB needs to check his V Statement in your forwarding block,
                                            he
                                            > > > is probably missing the/
                                            > > >
                                            > > > /Period Example: V .N9PMO$WPassWord$ W/
                                            > > >
                                            > > > //
                                            > > >
                                            > > > /The Period stops the echo and starts the Handshaking upon
                                            > > > connection./
                                            > > >
                                            > > > //
                                            > > >
                                            > > > /I will send you the Kiss stuff to your E-Mail Address. /
                                            > > >
                                            > > > //
                                            > > >
                                            > > > Mike Melnik
                                            > > > N9PMO
                                            > > > E-Mails Scanned By Symantec Corporate A/V
                                            > > >
                                            > > > -----Original Message-----
                                            > > > *From:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                            > <mailto:BPQ32% 40yahoogroups. com>
                                            > > [mailto:BPQ32@ yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                            > <mailto:BPQ32% 40yahoogroups. com>] *On
                                            > > > Behalf Of *David Calder
                                            > > > *Sent:* Saturday, March 15, 2008 2:35 PM
                                            > > > *To:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                            > <mailto:BPQ32% 40yahoogroups. com>
                                            > > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup for
                                            my
                                            > > > area.
                                            > > >
                                            > > > Well. It's up and running just fine. I have one forward protocol
                                            > > > error with one
                                            > > >
                                            > > > BBS and the rest work fine. I would say it's not me. BPQ 410D is
                                            > > > sweet
                                            > > >
                                            > > > and working with FBB. The telnet port is working just fine.
                                            > > >
                                            > > > This is also running on a machine with my CC Cluster AND AR
                                            > > > Cluster
                                            > > >
                                            > > > DX nodes! They all are playing nicely together.
                                            > > >
                                            > > > The only thing left is the RF ports. Mike! Got an example KISS
                                            > > > port
                                            > > >
                                            > > > for 410D?? It's been years since I ran a kiss port as I had the
                                            > > > DRSI all
                                            > > >
                                            > > > the time.
                                            > > >
                                            > > > Thanks,
                                            > > >
                                            > > > 73 Dave
                                            > > >
                                            > > > n4zkf
                                            > > >
                                            > > > www.n4zkf.com <http://www.n4zkf. <http://www.n4zkf. com> com
                                            > <http://www.n4zkf. <http://www.n4zkf. com> com>>
                                            > > >
                                            > > >
                                            > > > ------------ --------- --------- --------- --------- --------- -
                                            > > > --
                                            > > >
                                            > > > *From:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                            > <mailto:BPQ32% 40yahoogroups. com>
                                            > > [mailto:BPQ32@ yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                            > <mailto:BPQ32% 40yahoogroups. com>]
                                            > > > *On Behalf Of *Mike Melnik
                                            > > > *Sent:* Saturday, March 15, 2008 12:57 PM
                                            > > > *To:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                            > <mailto:BPQ32% 40yahoogroups. com>
                                            > > > *Subject:* RE: [BPQ32] Contemplating a new BPQ/WinFBB setup
                                            > > > for my area.
                                            > > >
                                            > > > /Jeff/
                                            > > >
                                            > > > /After running WinFbb 7.01-35 also know as 7.01A for a couple
                                            > > > of years I finally gave up and switched/
                                            > > >
                                            > > > /To WFBB 7.00E 32 Bit with BPQ32U latest Version 410D, to many
                                            > > > BUGS in 7.01A./
                                            > > >
                                            > > > / I also use Telpac for Winlink connections, AGWPE isn't
                                            > > > needed as the BPQ32U has an AGWtoBPQ look a like/
                                            > > >
                                            > > > / for programs needing AGWPE but if you want, AGWPE can be
                                            > > > used with BPQ32U, for me AGWPE is just one/
                                            > > >
                                            > > > /less program I don't need running./
                                            > > >
                                            > > > /One problem with all of the 16 Bit WFBB 7.00E, G and I is the
                                            > > > processor usage is 100% where as the /
                                            > > >
                                            > > > /32 Bit 7.00E runs nicely at 6%, if you are running W2K or XP
                                            > > > a couple of changes need to be made/
                                            > > >
                                            > > > /to make the Maintenance (Housekeeping) program to work./
                                            > > >
                                            > > > /As to a list of active BBS'S yes you are right it is hard to
                                            > > > find, I will be more then happy to help you out/
                                            > > >
                                            > > > /With all needed Programs and Files for BPQ and WFBB./
                                            > > >
                                            > > > /BTW most Winlink Uses/Nodes are switching from TELPAC to
                                            > > > ether Packlink or RMS BETA./
                                            > > >
                                            > > > Mike Melnik
                                            > > > N9PMO
                                            > > > E-Mails Scanned By Symantec Corporate A/V
                                            > > >
                                            > > > -----Original Message-----
                                            > > > *From:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                            > <mailto:BPQ32% 40yahoogroups. com>
                                            > > [mailto:BPQ32@ yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                            > <mailto:BPQ32% 40yahoogroups. com>]
                                            > > > *On Behalf Of *Jeff
                                            > > > *Sent:* Saturday, March 15, 2008 11:32 AM
                                            > > > *To:* BPQ32@yahoogroups. <mailto:BPQ32% 40yahoogroups. com> com
                                            > <mailto:BPQ32% 40yahoogroups. com>
                                            > > > *Subject:* [BPQ32] Contemplating a new BPQ/WinFBB setup for my
                                            > > > area.
                                            > > >
                                            > > > Hey guys/gals,
                                            > > >
                                            > > > I'm seriously contemplating a new PBBS for my area here in
                                            > > > Northern
                                            > > > Kentucky and have a few questions maybe this group can help
                                            > > > answer for me.
                                            > > >
                                            > > > Is there a good list of current PBBS's out there for the USA?
                                            I've
                                            > > > looked around some on the net, but I haven't really found a
                                            > > > one-stop
                                            > > > listing. I find some single state lists and most of them are
                                            > > > really
                                            > > > old lists.
                                            > > >
                                            > > > I've lightly perused over some of the documents out there, BTW
                                            the
                                            > > > best are found here on this group. I gather there are some bugs
                                            in
                                            > > > FBB when used with BPQ32? Just curious what these are in brief?
                                            > > >
                                            > > > Anyone on the list willing to give me some do's, dont's, and
                                            > > > things to
                                            > > > watch out for with BPQ32 and WinFBB?
                                            > > >
                                            > > > Latest version of WinFBB (which looks to be 7.00i) good to
                                            > > > use, or is
                                            > > > one of the prior versions better? Sometimes the latest and
                                            > > > greatest
                                            > > > isn't always the greatest ;-)
                                            > > >
                                            > > > I gather the Win32 WinFBB is pretty much Alpha software and
                                            > > > the Win16
                                            > > > stuff is much more stable?
                                            > > >
                                            > > > Can I, or better stated, has anyone ran WinFBB and BPQ32
                                            alongside
                                            > > > WinLink on the same TNC/Radio? AGW the route to go for this if
                                            > > > it's
                                            > > > possible? Would kind of like to offer a WinLink telpac station
                                            for
                                            > > > the area, but maximize existing equipment if possible.
                                            > > >
                                            > > > I'd probably have to go with a VHF/UHF local port and forward
                                            > > > via the
                                            > > > internet. Pros and cons of this? How would I go about, or who
                                            do I
                                            > > > contact, for forwarding arrangements and so forth?
                                            > > >
                                            > > > Thanks in advance for your patience with my questions!
                                            > > >
                                            > > > 73
                                            > > > Jeff
                                            > > > WA4ZKO
                                            > > >
                                            > > >
                                            > >
                                            > > --
                                            > >
                                            > > K.O. Higgs
                                            > > n0kfq@centurytel. <mailto:n0kfq% 40centurytel. net> net
                                            > <mailto:n0kfq% 40centurytel. net>
                                            > >
                                            > > ------------ --------- --------- ------
                                            > >
                                            > > Yahoo! Groups Links
                                            > >
                                            > >
                                            >
                                            > --
                                            >
                                            > K.O. Higgs
                                            > n0kfq@centurytel. <mailto:n0kfq% 40centurytel. net> net
                                            >

                                          Your message has been successfully submitted and would be delivered to recipients shortly.