Re: [BPQ32] LINBPQ
- The instructions are very adequate but commands in linux/unix are different along with manupliation of the operating system.Most of the commands and devices are in lowercase however some device names are in upper case as in /dev/ttyUSB0 (zero).Have you heard from Martin on the tracker?Jim wu3v----- Original Message -----From: John WisemanSent: Wednesday, February 06, 2013 01:55 PMSubject: RE: [BPQ32] LINBPQRenauld,Run soundmodemconfigCreate/Select ChannelSelect Packet IO TabSelect Mode = KISS from dropdown boxEnter com port name in File Tab - I have /home/pi/linbpq/com10Confgure LinBPQ to use this port COMPORT=1073, JohnG8BPQ, John,
From: renauld halbardier [mailto:renauld.halbardier@...]
Sent: 06 February 2013 13:20
To: John Wiseman
Subject: Re: [BPQ32] LINBPQ
Would you please developp and explain a little bit :
" The Linux Soundmodem can be used by configuring it to present a virtual KISS interface."
I have it runnning as sm0 under the ax25d
Renauld on4kviLe 05.02.2013 11:06, John Wiseman a écrit :I've added drivers for WINMOR and the UZ7HO soundmodem.There sems to be a problem with the SCS Tracker crashing the PI. This is under investigation.73,JohnThe instructions for installing BPQ on linux can be downloaded from https://dl.dropbox.com/u/31910649/InstallingLINBPQ.htmAs I mentioned in an ealier post, some familiarity with linux commands is required.Comments on both the instructions and the software would be appreciated.73,John
- Here is my adventure with TermTCP. Works nicely once configured.