Loading ...
Sorry, an error occurred while loading the content.

RE: [BPQ32] Re: guide

Expand Messages
  • John Wiseman
    Sorry, Jim. Just found this in Drafts Jim, The Virtual COM port is the link between BPQHostModes and Winpack. You don t have ot configure anything in BPQ32.
    Message 1 of 5 , Jan 30, 2013
    • 0 Attachment
      Sorry, Jim. Just found this in "Drafts"
       
       
      Jim,
       
      The Virtual COM port is the link between BPQHostModes and Winpack. You don't have ot configure anything in BPQ32. Steps are:
       
      create com port using VCOMConfig
       
      Run BPQHostModes
       
      Enter COM port created above, number of streams (up to 10) and mask. Select DED mode. Save Settings, Restart BPQHostModes.
       
      Run Winpack, select TF2.7b Hostmode. It should then attach to the node.
       
      73, John
       


      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of James mcdowall
      Sent: 27 January 2013 14:03
      To: BPQ32@yahoogroups.com
      Subject: [BPQ32] Re: guide

       

      Thanks John for the info its working now .
      An other thing i need to know is how to get bpq to read bpqhostmodes i have set it to com4 and winpack connects to it useing ded but i dont seem to get virtual com 4 to talk to bpq i know it must be lines i put in the cfg but am at a loss to what i have to write
       
      cheers jim g7icd

    • James Mcdowall
      ... Thanks John it worked can i pick your brain one more time ?is all node linking done via internet now ? cheers jim
      Message 2 of 5 , Jan 30, 2013
      • 0 Attachment
        --- In BPQ32@yahoogroups.com, "John Wiseman" wrote:
        >
        > Sorry, Jim. Just found this in "Drafts"
        >
        >
        > Jim,
        >
        > The Virtual COM port is the link between BPQHostModes and Winpack. You don't
        > have ot configure anything in BPQ32. Steps are:
        >
        > create com port using VCOMConfig
        >
        > Run BPQHostModes
        >
        > Enter COM port created above, number of streams (up to 10) and mask. Select
        > DED mode. Save Settings, Restart BPQHostModes.
        >
        > Run Winpack, select TF2.7b Hostmode. It should then attach to the node.
        >
        > 73, John
        >
        >
        > _____
        >
        > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
        > James mcdowall
        > Sent: 27 January 2013 14:03
        > To: BPQ32@yahoogroups.com
        > Subject: [BPQ32] Re: guide
        >
        >
        >
        >
        >
        > Thanks John for the info its working now .
        > An other thing i need to know is how to get bpq to read bpqhostmodes i have
        > set it to com4 and winpack connects to it useing ded but i dont seem to get
        > virtual com 4 to talk to bpq i know it must be lines i put in the cfg but am
        > at a loss to what i have to write
        >
        > cheers jim g7icd
        >
        Thanks John it worked

        can i pick your brain one more time ?is all node linking done via internet now ? cheers jim
      Your message has been successfully submitted and would be delivered to recipients shortly.