Loading ...
Sorry, an error occurred while loading the content.
 

Re: uz7ho soundmodem connect request

Expand Messages
  • Don P
    Ok, thanks, John The INBBS-1 works when the kam is in use so thought maybe the soundmodem would be ok too. Thanks for the help.
    Message 1 of 13 , Dec 23, 2012
      Ok, thanks, John

      The INBBS-1 works when the kam is in use so thought maybe the soundmodem would be ok too. Thanks for the help.

      --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
      >
      > Don,
      >
      > Connects to junbbs-1 will not work. It is not one of the applcalls or
      > nore/port call.
      >
      > John
      >
      >
      > _____
      >
      > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don
      > P
      > Sent: 23 December 2012 02:20
      > To: BPQ32@yahoogroups.com
      > Subject: [BPQ32] Re: uz7ho soundmodem connect request
      >
      >
      >
      >
      > I think what the prob is running it wine. It seems to run fine in wine
      > accept for accepting connects. I have used the soundmodem in windows with no
      > prob so my experiment for wine is done apparently LOL
      >
      > I am setup to forward with N9LYA, I can see him trying to connect but that
      > is it. He uses junbbs-1 so it forces the hf connect.
      >
      > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "John
      > Wiseman" <john.wiseman@> wrote:
      > >
      > > If you are using the UZ7HO driver, the modem accepts connects to the calls
      > > it has been configured with. It then passes a "connected" message to BPQ.
      > > The calls it should accept connects to are all your applcalls, and the
      > port
      > > call if it is specified. If no port call is specified, it should accept
      > > calls to your Nodecall.
      > >
      > > What are your configured calls, and which one are you testing calls to?
      > >
      > > John
      > >
      > >
      > > _____
      > >
      > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On Behalf
      > Of Mark
      > > Milburn
      > > Sent: 22 December 2012 22:45
      > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      > > Subject: Re: [BPQ32] uz7ho soundmodem connect request
      > >
      > >
      > >
      > >
      > >
      > > The soundmodem doesn't respond to the connect request, it just
      > > transfers the info to your BPQ program. Is the info being transferred
      > > to BPQ? Does it show up in your terminal?
      > >
      > >
      > > On Sat, Dec 22, 2012 at 4:00 PM, Don P <w9jun@> wrote:
      > >
      > >
      > >
      > >
      > >
      > > I am running the uz7ho soundmodem...
      > >
      > > I can decode with no problem
      > > I can initiate a connect request with no problem
      > > BUT the soundmodem won't respond to a connect request..
      > >
      > > Ideas?
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.