Loading ...
Sorry, an error occurred while loading the content.

Re: [BPQ32] telnet connection

Expand Messages
  • Dave
    ... Yours will connect to the bpqnode then you need to enter commands to go to the bbs or wherever on the network you wish to go to from the node. ... John s
    Message 1 of 2 , Dec 7, 2012
    • 0 Attachment

      On 12/7/2012 6:26 PM, kenny wrote:
       

      Hi John & all
      What it the correct format for the bbs node telnet connection setup in Bpq.cfg.
      this is how mine is set but it does not connect.
      USER=kenny,password,g7vja

      Yours will connect to the bpqnode then you need to enter commands to go to the bbs or wherever on the network you wish to go to from the node.

      johns sample shows different?
      USER=JohnBBS,password,g8bpq,BBS

      John's will send the connection directly to the BBS.

      The way you have your user line configured......
      the Term will show
      user=
      then you enter
      kenny
      the term will then show
      password=
      then you enter
      password
      you will then be logged in as g7vja to the BPQnode. Hit <p><enter> to see the ports available to you or <n><enter> for nodes etc.

      Both work for me.
      73
      Dave
      WB2HVF


      regards
      Ken g7vja
      gb7cow-3


    Your message has been successfully submitted and would be delivered to recipients shortly.