Loading ...
Sorry, an error occurred while loading the content.

telnet connection

Expand Messages
  • kenny
    Hi John & all What it the correct format for the bbs node telnet connection setup in Bpq.cfg. this is how mine is set but it does not connect.
    Message 1 of 2 , Dec 7, 2012
    • 0 Attachment
      Hi John & all
      What it the correct format for the bbs node telnet connection setup in Bpq.cfg.
      this is how mine is set but it does not connect.
      USER=kenny,password,g7vja
      johns sample shows different?
      USER=JohnBBS,password,g8bpq,BBS

      regards
      Ken g7vja
      gb7cow-3
    • Dave
      ... Yours will connect to the bpqnode then you need to enter commands to go to the bbs or wherever on the network you wish to go to from the node. ... John s
      Message 2 of 2 , Dec 7, 2012
      • 0 Attachment

        On 12/7/2012 6:26 PM, kenny wrote:
         

        Hi John & all
        What it the correct format for the bbs node telnet connection setup in Bpq.cfg.
        this is how mine is set but it does not connect.
        USER=kenny,password,g7vja

        Yours will connect to the bpqnode then you need to enter commands to go to the bbs or wherever on the network you wish to go to from the node.

        johns sample shows different?
        USER=JohnBBS,password,g8bpq,BBS

        John's will send the connection directly to the BBS.

        The way you have your user line configured......
        the Term will show
        user=
        then you enter
        kenny
        the term will then show
        password=
        then you enter
        password
        you will then be logged in as g7vja to the BPQnode. Hit <p><enter> to see the ports available to you or <n><enter> for nodes etc.

        Both work for me.
        73
        Dave
        WB2HVF


        regards
        Ken g7vja
        gb7cow-3


      Your message has been successfully submitted and would be delivered to recipients shortly.