Re: BPQ32 crashing and web/telnet server behaviour
- Ive allowed some time to reveal what is going on with this. I closed the forwards on the router for the Telnet and Http port initially and found that BPQ32 became much much more stable.
After a week or so I opened up the Telnet ports only again in the forwards. I was also in the mean time using the Telnet ports on the LAN quite a bit. I found no problem with this at all. It would not crash. All this time I have avoided the Http Port completely.
Today I ventured into the Http port for the first time in a couple of weeks. And sure enough I crashed BPQ32 consistantly.
I tried IE and Google Chrome Portable as well as Firefox 15 and 16.
The common denominator (only one to crash BPQ32) was Firefox 15 and 16.
I have since upgraded to Firefox 17 and have not managed to crash BPQ32 yet. To get it to crash I had to go into the terminal and make an outbound connect using FF15 or 16 . Not long after that it would just freeze up BPQ completely.
Off the subject perhaps but I have also experienced issues with Firefox of late on router logins. Its been a issue for a while it seems. I tend to think Firefox is broke a bit of late.
None the less it seems that its possible that Browsers can send something to to BPQ that is pretty catastrophic.
--- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
> It is possible there is something that firefox is sending that is upsetting
> it.I'll try it here with forefox and see what happens, In the meantime it
> might be worth removing the httpport (or at least port forwarding for that
> port), and see if everything else works ok.
> I have occasionally seen the monitor not working in TermTCP, but not often
> enough to track down the cause. The"Monitor UI only" option is there to
> remove other monitoring on a channel with both ui and connected traffic. It
> wont make any difference on an APRS-only channel.
> 73, John
> From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
> Sent: 14 November 2012 11:58
> To: BPQ32@yahoogroups.com
> Subject: [BPQ32] BPQ32 crashing and web/telnet server behaviour
> I have been trying to figure out for a few weeks now just why BPQ32 seems to
> crash at times and need to be forcibly closed via the task manager every few
> days. I have been experimenting and gathering observations.
> I downgraded to an earlier version of BPQ32 to try to see if this bug that
> has recently hit me is a new one but that seemed to prove nothing.
> So I removed some port forwards on my router and this seems to have had it
> running now for over 8 days non stop. Proving that perhaps its related to
> the BPQ Telnet Port definitions.
> Here is a bit of an extract from my config file in the Telnet server area.
> ID=Telnet Server
> FBBPORT=80xx 80xx
> All of the Portforwards for the above ports are now removed so that its only
> usable on the Local LAN.
> Now on playing around a bit I managed to make the Web server crash by using
> Firefox to access the Terminal section. Even trying to use IE to access it
> would not work after crashing it even though BPQ32 still seemed to be
> working. A restart of BPQ32 was required to get the Web server running.
> Ive upgraded to version 18.104.22.168 now and have managed to crash the web server
> again by using Firefox. This happens in various ways. Initially I was not
> even able to get to the login page for the terminal but now I do. Just now
> it crashed after login and would not respond to a ? at the Node prompt. Cant
> access the Web server at all now even via IE . Have to restart BPQ again.
> I am wondering if this is the cause of BPQ crashing and burning after a few
> days? I also was suspicious about the Telnet server as it seemed to crash
> BPQ out after using that feature so I have stopped using that across the
> Lan. I am less inclined to think that its the Telnet server specifically now
> One very odd thing that happens with the Telnet server is that often upon
> connection (using BPQtermTcp v 22.214.171.124) I see no monitor traffic. The only
> way to bring it up is to make an outbound connection and then disconnect.
> This automatically disconnects the Telnet server from BPQTermTcp so I then
> reconnect and the monitor traffic shows up properly. Ive found this both on
> the local Lan and remotely via the Net. And Yes I have monitor options set.
> I am sitting on a APRS channel which is basically only Ui Frames. Does this
> mean that I have to have the "only monitor Uiframes" option set ? This is
> not entirely clear.
> So there is some food for thought. I will stick to v 126.96.36.199 for now and
> start using the Telnet server again via the Lan to see if the instabilities
> Has anybody else seen anything like this ? Any comments John ?
> Regards Tony VK5AH