Loading ...
Sorry, an error occurred while loading the content.

RE: [BPQ32] config bpqcfg.txt with pk232 on fbbwin

Expand Messages
  • David Chadufaud
    Hi all and thank s for your help i ve found the probleme so i read and read all message on the forum and found this reson i tried and works fine the reason is:
    Message 1 of 6 , Jan 31, 2008
      Hi all and thank's for your help
      i've found the probleme
      so i read and read all message on the forum and found this reson i tried and works fine
      the reason is:
      my pk232 have an eprom with software of year 1987 andon this version the kiss is not real so i tried on a pk12 with eprom 1994 and all works perfectly
      i must change my eprom version
      but freat thank's for all it's a very good forum for help and more
      have a nice day
      David VE2EDF


      To: BPQ32@yahoogroups.com
      From: ron_n5in@...
      Date: Wed, 30 Jan 2008 12:38:43 -0800
      Subject: Re: [BPQ32] config bpqcfg.txt with pk232 on fbbwin

      I had hoped someone with more knowledge of FBB would have replied to you, and perhaps they will.  However the configurations in  c:\Program Files\BPQ32\Examples\Medium can't be too far from what you are looking for.  The application happens to be a DX Cluster, but you could just change the applications parameter to:
      and you would be almost there.  You need to change the calls/aliases/IDMSG/BTEXT and such things which obviously need be changed to be applicable to you.  Of course your TNC must be set in KISS mode.

      Now as to configuring FBB, hopefully someone else here will step up....

      Ron, N5IN

      ----- Original Message ----
      From: david_linda_puncho <davidchadufaud@...>
      To: BPQ32@yahoogroups.com
      Sent: Wednesday, January 30, 2008 7:17:42 AM
      Subject: [BPQ32] config bpqcfg.txt with pk232 on fbbwin

      Hi and sorry for my english i'm french canadian
      Before i used fbb dos and pk232 so it worked well
      now i want install the last realease of FBB 7.01.35 with my pk232
      i read and read help on internet and i understand that i must use
      bpq32 for this use
      my fbb as 2 port one for forward on internet and the second with the
      pk232 connected on radio
      I read all your post but don't found the way
      so my question is:
      could you give me an exemple of the bpqcfg.txt where on the port 1
      is the forward internet and the port 2 the pk232 connected with bpq
      on the serial 2
      and i saw too i connect the pk232 before run fbb and bpq and with
      terminal windows itype in cmd mode kiss on on the pk232 and close
      terminal and run fbb
      so is it the right way ?
      thank's by advance
      sorry but i
      'm new on fbb windows on bpq32 and english hi hi hi
      best regard

    Your message has been successfully submitted and would be delivered to recipients shortly.