Re: Not BPQ32 but X1J4 Question
According to my Tiny-II manual you should link pin 9 to pin 5 (ground) for NETROM or KISS on the serial port. Unlink pin 9 for host mode.
--- In BPQ32@yahoogroups.com, "Bill Erhardt" <k7mt@...> wrote:
> Howdy Gang,
> Is anyone here on BPQ a X1J4 Expert as I have a question about the HOST
> We are attempting to hook up a Kantronics KTU with Weather Node Firmware to
> a Paccomm Tiny II with X1J4. All settings in the KTU are correct and it is
> connected to the Serial DB 25 pin port with the proper cable from the KTU.
> We have host on in the Tiny II but it returns Host Table Full when HOST is
> called via packet. We are trying to access the KTU and it will return a
> wxn: so we can display the weather it has stored.
> The KTU works just fine hooked to a Kantronics TNC serial port with version
> 8.2. I can log in and it hooks up to the KTU and I can display the Weather,
> make changes, etc.
> Anyone have any ideas about how the host mode in a Paccomm Tiny II with X1J$
> needs to be setup to access a device (Kantronics KTU with WeatherNode
> firmware) hooked to the rs-232 db-25 pin port.
> This will have indoor/outdoor temperature readings on our packet
> node/repeater site on Mt. Belmont at 7,330 feet. We like the KTU as it store
> data for about two months.
> Thanks Bill K7MT