Loading ...
Sorry, an error occurred while loading the content.

RE: [BPQ32] Multiple Frequencies for BBS

Expand Messages
  • John Wiseman
    Dave, The KPC9612 has two radio ports, so can operate on two frequencies at the same time. 73, John _____ From: BPQ32@yahoogroups.com
    Message 1 of 5 , Nov 9, 2012
    • 0 Attachment
      Dave,
       
      The KPC9612 has two radio ports, so can operate on two frequencies at the same time.
       
      73, John


      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Dave
      Sent: 09 November 2012 13:54
      To: BPQ32@yahoogroups.com
      Subject: Re: [BPQ32] Multiple Frequencies for BBS

       

      I have 3 frequencies feed my BBS.  1 VHF and 2 HF. In my case each HF frequency has it's own radio and Pactor modem thus, it's own port. From what you are saying, you are using one modem, the KPC 9612, so you would need to scan, then you would use one port with additional configuration to control the radio on that port.
      The HF ports are set up to direct ALL connects directly to the BBS.
      73
      Dave WB2HVF

      On 11/9/2012 8:10 AM, k1jtc wrote:
       

      Not sure if someone has asked this but I am trying to have 2 different frequencies feed into the BBS. I am using a KPC 9612. I have setup the config with different ports numbers to handle the different freq. In the mailchat server it has only 1 spot for BBS app. so I am assumming that there would need to be some special setup to make it work correctly. I can use terminal and access the different radios just fine. Just trying to figure out if there are other things I need to tweek to get it to work.

      Thanks in advance.


    • Dave
      Opps! I was thinking 2 HF radios. It would have helped to check out the specs on the KPC9712 first. Sorry. 73 Dave
      Message 2 of 5 , Nov 9, 2012
      • 0 Attachment
        Opps!
        I was thinking 2 HF radios. It would have helped to check out the specs on the KPC9712 first.
        Sorry.
        73
        Dave

        On 11/9/2012 9:15 AM, John Wiseman wrote:
         

        Dave,
         
        The KPC9612 has two radio ports, so can operate on two frequencies at the same time.
         
        73, John


        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Dave
        Sent: 09 November 2012 13:54
        To: BPQ32@yahoogroups.com
        Subject: Re: [BPQ32] Multiple Frequencies for BBS

         

        I have 3 frequencies feed my BBS.  1 VHF and 2 HF. In my case each HF frequency has it's own radio and Pactor modem thus, it's own port. From what you are saying, you are using one modem, the KPC 9612, so you would need to scan, then you would use one port with additional configuration to control the radio on that port.
        The HF ports are set up to direct ALL connects directly to the BBS.
        73
        Dave WB2HVF

        On 11/9/2012 8:10 AM, k1jtc wrote:
         

        Not sure if someone has asked this but I am trying to have 2 different frequencies feed into the BBS. I am using a KPC 9612. I have setup the config with different ports numbers to handle the different freq. In the mailchat server it has only 1 spot for BBS app. so I am assumming that there would need to be some special setup to make it work correctly. I can use terminal and access the different radios just fine. Just trying to figure out if there are other things I need to tweek to get it to work.

        Thanks in advance.



      Your message has been successfully submitted and would be delivered to recipients shortly.