Re: rig control and auto forwarding
- Robby where you have the SCSPactor port setup you should have a CONFIG line. Below the CONFIG line I have
RIGCONTROL COM4 9600 KENWOOD TS-570D 4 "your freq."/U "your freq."/L and so on. Add your frequencies in place of "your freq." looks like this 3.500/L 3.600/U with /U or /L for upper or lower side band. You may have to change the com-port and speed for your setup.
- Robby,If you have the 857 connected to the rig control port of the PTC, see the section "Rig Control Port" in http://www.cantab.net/users/john.wiseman/Documents/SCSPactor.htm73, John
From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of w5seg@...
Sent: 05 November 2012 17:10
Subject: [BPQ32] rig control and auto forwarding
Can anyone help with rig control using a yaseu 857 and scs ptciipro. I am not using a comport. I have seen it working with airmail but I am using BPQ.