Loading ...
Sorry, an error occurred while loading the content.

Re: RE: [BPQ32] Read faid for AGW socket - error code = 10053

Expand Messages
  • kb7rsi@cox.net
    Hi John. Yes this happens every time and it never recovers. What are the steps in connecting bpq to agw? Am I missing something? I basicly start agw first then
    Message 1 of 4 , Dec 23, 2005
    • 0 Attachment

      Hi Harold. The error code means "WSAECONNABORTED". Basically, the connection
      between BPQ and AGW has failed. I can't think of why this should happen on a
      local connection, especially after only 20 secs. Does the connection then
      recover? And does this occur every time?

      Regards,

      John

      -----Original Message-----
      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com]On Behalf Of
      kb7rsi
      Sent: Friday, December 23, 2005 15:33
      To: BPQ32@yahoogroups.com
      Subject: [BPQ32] Read faid for AGW socket - error code = 10053


      Hello all.
      Has anyone gotten this error befor while trying to use bpq with agw?
      This happens in the bpq console after running about 20 seconds.
      I start AGW first as with any other AGW program and then bpq32.
      Am I missing something?  I am running this under windows XP and here
      is a copy of my bpqcfg.txt file.

      Thanks for any and all help.
      Harold
      kb7rsi
      Las Vegas, NV.


      ;      CONFIGURATION FILE FOR BPQ32: GM8BPQ SWITCH SOFTWARE
      ;      AR-Cluster node N5IN 2005/Sept/14
      ;
      ;HOSTINTERRUPT=127            ; Interrupt used for BPQ host mode
      support
      EMS=0                        ; Doesn't use EMS RAM
      DESQVIEW=0                  ; DesqView unused
      NODECALL=KB7RSI-3            ; Node callsign
      NODEALIAS=VEGAS                  ; Node alias
      BBSCALL=KB7RSI-2            ; BBS/AR-Cluster callsign
      BBSALIAS=VGSBBS                  ; BBS/AR-Cluster alias
      IDMSG:                        ; The UI broadcast text follows:
      KB7RSI-3 PACKET NODE, LAS VEGAS, NV  DM26IF
      ***                        ; Denotes end of IDMSG text
      UNPROTO=ID                  ; The UI broadcast address
      INFOMSG:                  ; The INFO command text follows:
      Type BBS for VGSBBS BBS System.
      ***                        ; Denotes end of INFOMSG text
      CTEXT:                        ; The CTEXT text follows:
      Welcome to the KB7RSI Packet Node System in Las Vegas, NV.
      VEGAS:KB7RSI-3} DX CONNECT BYE INFO NODES ROUTES PORTS USERS MHEARD
      ***                        ; Denotes end of CTEXT text
      FULL_CTEXT=1                  ; 0=send CTEXT to L2 connects to
      NODEALIAS only
      ;                        ; 1=send CTEXT to all connectees
      ;
      ;      Network System Parameters:
      ;
      OBSINIT=6                  ; Initial obsolence value set when a
      node is
                              ; included in a received nodes
      broadcast.  This
                              ; value is decremented by 1 every
      NODESINTERVAL.
      OBSMIN=4                  ; When the obsolence value of a node
      falls below
                              ; this value that node's information
      is not included
                              ; in a node broadcast.
      NODESINTERVAL=30                ; Nodes broadcast interval in minutes
      IDINTERVAL=15                 ; 'IDMSG' UI broadcast interval in
      minutes
      BTINTERVAL=0                    ; The CW beacon interval in minutes,
      0=OFF
      L3TIMETOLIVE=25                  ; Max L3 hops
      L4RETRIES=3                  ; Level 4 retry count
      L4TIMEOUT=120                  ; Level 4 timeout in seconds
      L4DELAY=10                  ; Level 4 delayed ack timer in
      seconds
      L4WINDOW=4                  ; Level 4 window size
      MAXLINKS=63                  ; Max level 2 links
      MAXNODES=128                  ; Max nodes in nodes table
      MAXROUTES=64                  ; Max adjacent nodes
      MAXCIRCUITS=128                  ; Max L4 circuits
      MINQUAL=192                  ; Minimum quality to add to nodes
      table
      BBSQUAL=255                  ; BBS quality relative to NODE -
      used to limit
                              ; spread' of BBS node info through
      the network to
                              ; your required service area.  Max
      is 255.
      BUFFERS=255                  ; Packet buffers - 255 means
      allocate as many
                              ; as possible, normally about 130,
      depending
                              ; upon other table sizes.
      ;
      ;      TNC default parameters:
      ;
      PACLEN=236                  ; Max packet size (236 max for
      net/rom)
      ;
      ;      PACLEN is a problem! The ideal size depends on the link(s)
      over
      ;      which a packet will be sent. For a session involving another
      node,
      ;      we have no idea what is at the far end. Ideally each node
      should have
      ;      the capability to combine and then refragment messages to
      suit each
      ;      link segment - maybe when there are more of my nodes about
      than 'real'
      ;      ones, I'll do it. When the node is accessed directly, things
      are a
      ;      bit easier, as we know at least something about the link.
      So, currently
      ;      there are two PACLEN params, one here and one in the PORTS
      section.
      ;      This one is used to set the initial value for sessions via
      other nodes
      ;      and for sessions initiated from here. The other is used for
      incoming
      ;      direct (Level 2) sessions. In all cases the TNC PACLEN
      command can
      ;      be used to override the defaults.
      ;
      TRANSDELAY=1                  ; Transparent node send delay in
      seconds
      ;
      ;      Level 2 Parameters:
      ;
      ; T1, T2 and N2 are now in the PORTS section
      ;
      T3=180                        ; Link validation timer in seconds
      IDLETIME=900                  ; Idle link shutdown timer in seconds

      ;
      ;
      ;      Configuration Options:
      ;
      BBS=0                        ; Include BBS support
      NODE=1                        ; Include switch support
      HIDENODES=1                  ; If set to 1, nodes beginning with
      a #
                              ; require a 'N *' command to be
      displayed.
      ;
      ;      The *** LINKED command is intended for use by gateway
      software, and
      ;      concern has been expressed that it could be misused.  It is
      recommended
      ;      that it be disabled (=N) if unneeded.
      ;
      ENABLE_LINKED=Y                  ; Controls processing of *** LINKED
      command
                              ; Y = allows unrestricted use
                              ; A = allows use by application
      program
                              ; N = disabled
      ;
      ;      AX25 port definitions:
      ;
      ;      With the following definition BPQ32 uses AGWPE to access the
      TNC.
      ;       To avoid a port conflict with AGWtoBPQ, the port for AGWPE
      has been
      ;      set here to 8001 and must also be set in the AGWPE program
      to 8001.
      PORT
            PORTNUM=1            ; Optonal but sets port number if
      stated
            ID=AGW 145.050 MHz      ; Displayed by PORTS command
            TYPE=EXTERNAL            ; Calls an external module
            DLLNAME=BPQtoAGW.DLL      ; Uses BPQtoAGW.DLL
            IOADDR=1F41            ; AGWPE Telnet port x'1F41' = 8001
            CHANNEL=A            ; AGWPE Port # A=1, B=2, etc
            QUALITY=192            ; Setting to 0 stops node broadcasts
            MAXFRAME=7            ; Max outstanding frames (1 thru 7)
            FRACK=5000            ; Level 2 timout in milliseconds
            RESPTIME=500            ; Level 2 delayed ack timer in
      milliseconds
            RETRIES=10            ; Level 2 maximum retry value
            PACLEN=236            ; Default max packet length for this
      port
      ENDPORT
      ;
      ;
      PORT
            PORTNUM=2            ; Optonal but sets port number if
      stated
            ID=AX/IP/UDP            ; Displayed by PORTS command
            TYPE=EXTERNAL            ; Calls an external module
            DLLNAME=BPQAXIP.DLL      ; Uses BPQAXIP.DLL
            QUALITY=192            ; Setting to 0 stops node broadcasts
            MAXFRAME=7            ; Max outstanding frames (1 thru 7)
            FRACK=3000            ; Level 2 timout in milliseconds
            RESPTIME=1000            ; Level 2 delayed ack timer in
      milliseconds
            RETRIES=10            ; Level 2 maximum retry value
            PACLEN=236            ; Max = 236
      ENDPORT
      ;
      ;
      ROUTES:                        ; Locked routes
      ;
      ;      CALLSIGN,QUALITY,PORT[,MAXFRAME,FRACK,PACLEN]
      ;      The values in [...] if stated override the port defaults.
      ;
      ***                        ; Denotes end of locked routes
      ;
      ;      Applications supported:
      ;
      ;      The first three are reserved for BBS, HOST and REMOTE SYSOP.
      ;      Five additional applications, up to 12 bytes each, can be
      ;      defined as you wish. Applications beginning with a * are not
      ;      shown in the valid commands display.
      ;
      ;APPLICATIONS=DX,,*SYS      ;BBS=DX, no host, remote sysop=*SYS
      ;







      Yahoo! Groups Links









    • Ron Stordahl
      On your port number 2 your configuration is incorrect. You are missing your IOADDR statement for one thing. But I would really like to see your bpqcfg.txt
      Message 2 of 4 , Dec 24, 2005
      • 0 Attachment
        On your port number 2 your configuration is incorrect.  You are missing your IOADDR statement for one thing.  But I would really like to see your bpqcfg.txt file in a cleaner form, what I have received is all chopped up, apparently due to line length issues...maybe Yahoo is doing it.  If it's like it looks, I don't think the compiler bpqcfg.exe can make sense of it.  Can you zip it up and e-mail me the zip file?  Send it to ron.stordahl@....  I use IOADDR=1F41 in each port description and of course AGWPE is configured to use 8001 (which is different from it's default...so you have to change it to 8001 - I am sure you have set AGWPE to 8001?).

        Ron, N5IN



        kb7rsi@... wrote:
        Hi John.
        Yes this happens every time and it never recovers.
        What are the steps in connecting bpq to agw?
        Am I missing something?
        I basicly start agw first then start bpq and then after about 20 secs or so, thats when i get the error.

        Thanks

        Harold
        kb7rsi


        >
        > From: "John Wiseman" <john.wiseman@...>
        > Date: 2005/12/23 Fri PM 03:42:14 EST
        > To: <BPQ32@yahoogroups.com>
        > Subject: RE: [BPQ32] Read faid for AGW socket - error code = 10053
        >
        >




        Hi Harold. The error code means "WSAECONNABORTED". Basically, the connection
        between BPQ and AGW has failed. I can't think of why this should happen on a
        local connection, especially after only 20 secs. Does the connection then
        recover? And does this occur every time?

        Regards,

        John

        -----Original Message-----
        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com]On Behalf Of
        kb7rsi
        Sent: Friday, December 23, 2005 15:33
        To: BPQ32@yahoogroups.com
        Subject: [BPQ32] Read faid for AGW socket - error code = 10053


        Hello all.
        Has anyone gotten this error befor while trying to use bpq with agw?
        This happens in the bpq console after running about 20 seconds.
        I start AGW first as with any other AGW program and then bpq32.
        Am I missing something?  I am running this under windows XP and here
        is a copy of my bpqcfg.txt file.

        Thanks for any and all help.
        Harold
        kb7rsi
        Las Vegas, NV.


        ;      CONFIGURATION FILE FOR BPQ32: GM8BPQ SWITCH SOFTWARE
        ;      AR-Cluster node N5IN 2005/Sept/14
        ;
        ;HOSTINTERRUPT=127            ; Interrupt used for BPQ host mode
        support
        EMS=0                        ; Doesn't use EMS RAM
        DESQVIEW=0                  ; DesqView unused
        NODECALL=KB7RSI-3            ; Node callsign
        NODEALIAS=VEGAS                  ; Node alias
        BBSCALL=KB7RSI-2            ; BBS/AR-Cluster callsign
        BBSALIAS=VGSBBS                  ; BBS/AR-Cluster alias
        IDMSG:                        ; The UI broadcast text follows:
        KB7RSI-3 PACKET NODE, LAS VEGAS, NV  DM26IF
        ***                        ; Denotes end of IDMSG text
        UNPROTO=ID                  ; The UI broadcast address
        INFOMSG:                  ; The INFO command text follows:
        Type BBS for VGSBBS BBS System.
        ***                        ; Denotes end of INFOMSG text
        CTEXT:                        ; The CTEXT text follows:
        Welcome to the KB7RSI Packet Node System in Las Vegas, NV.
        VEGAS:KB7RSI-3} DX CONNECT BYE INFO NODES ROUTES PORTS USERS MHEARD
        ***                        ; Denotes end of CTEXT text
        FULL_CTEXT=1                  ; 0=send CTEXT to L2 connects to
        NODEALIAS only
        ;                        ; 1=send CTEXT to all connectees
        ;
        ;      Network System Parameters:
        ;
        OBSINIT=6                  ; Initial obsolence value set when a
        node is
                                ; included in a received nodes
        broadcast.  This
                                ; value is decremented by 1 every
        NODESINTERVAL.
        OBSMIN=4                  ; When the obsolence value of a node
        falls below
                                ; this value that node's information
        is not included
                                ; in a node broadcast.
        NODESINTERVAL=30                ; Nodes broadcast interval in minutes
        IDINTERVAL=15                 ; 'IDMSG' UI broadcast interval in
        minutes
        BTINTERVAL=0                    ; The CW beacon interval in minutes,
        0=OFF
        L3TIMETOLIVE=25                  ; Max L3 hops
        L4RETRIES=3                  ; Level 4 retry count
        L4TIMEOUT=120                  ; Level 4 timeout in seconds
        L4DELAY=10                  ; Level 4 delayed ack timer in
        seconds
        L4WINDOW=4                  ; Level 4 window size
        MAXLINKS=63                  ; Max level 2 links
        MAXNODES=128                  ; Max nodes in nodes table
        MAXROUTES=64                  ; Max adjacent nodes
        MAXCIRCUITS=128                  ; Max L4 circuits
        MINQUAL=192                  ; Minimum quality to add to nodes
        table
        BBSQUAL=255                  ; BBS quality relative to NODE -
        used to limit
                                ; spread' of BBS node info through
        the network to
                                ; your required service area.  Max
        is 255.
        BUFFERS=255                  ; Packet buffers - 255 means
        allocate as many
                                ; as possible, normally about 130,
        depending
                                ; upon other table sizes.
        ;
        ;      TNC default parameters:
        ;
        PACLEN=236                  ; Max packet size (236 max for
        net/rom)
        ;
        ;      PACLEN is a problem! The ideal size depends on the link(s)
        over
        ;      which a packet will be sent. For a session involving another
        node,
        ;      we have no idea what is at the far end. Ideally each node
        should have
        ;      the capability to combine and then refragment messages to
        suit each
        ;      link segment - maybe when there are more of my nodes about
        than 'real'
        ;      ones, I'll do it. When the node is accessed directly, things
        are a
        ;      bit easier, as we know at least something about the link.
        So, currently
        ;      there are two PACLEN params, one here and one in the PORTS
        section.
        ;      This one is used to set the initial value for sessions via
        other nodes
        ;      and for sessions initiated from here. The other is used for
        incoming
        ;      direct (Level 2) sessions. In all cases the TNC PACLEN
        command can
        ;      be used to override the defaults.
        ;
        TRANSDELAY=1                  ; Transparent node send delay in
        seconds
        ;
        ;      Level 2 Parameters:
        ;
        ; T1, T2 and N2 are now in the PORTS section
        ;
        T3=180                        ; Link validation timer in seconds
        IDLETIME=900                  ; Idle link shutdown timer in seconds

        ;
        ;
        ;      Configuration Options:
        ;
        BBS=0                        ; Include BBS support
        NODE=1                        ; Include switch support
        HIDENODES=1                  ; If set to 1, nodes beginning with
        a #
                                ; require a 'N *' command to be
        displayed.
        ;
        ;      The *** LINKED command is intended for use by gateway
        software, and
        ;      concern has been expressed that it could be misused.  It is
        recommended
        ;      that it be disabled (=N) if unneeded.
        ;
        ENABLE_LINKED=Y                  ; Controls processing of *** LINKED
        command
                                ; Y = allows unrestricted use
                                ; A = allows use by application
        program
                                ; N = disabled
        ;
        ;      AX25 port definitions:
        ;
        ;      With the following definition BPQ32 uses AGWPE to access the
        TNC.
        ;       To avoid a port conflict with AGWtoBPQ, the port for AGWPE
        has been
        ;      set here to 8001 and must also be set in the AGWPE program
        to 8001.
        PORT
              PORTNUM=1            ; Optonal but sets port number if
        stated
              ID=AGW 145.050 MHz      ; Displayed by PORTS command
              TYPE=EXTERNAL            ; Calls an external module
              DLLNAME=BPQtoAGW.DLL      ; Uses BPQtoAGW.DLL
              IOADDR=1F41            ; AGWPE Telnet port x'1F41' = 8001
              CHANNEL=A            ; AGWPE Port # A=1, B=2, etc
              QUALITY=192            ; Setting to 0 stops node broadcasts
              MAXFRAME=7            ; Max outstanding frames (1 thru 7)
              FRACK=5000            ; Level 2 timout in milliseconds
              RESPTIME=500            ; Level 2 delayed ack timer in
        milliseconds
              RETRIES=10            ; Level 2 maximum retry value
              PACLEN=236            ; Default max packet length for this
        port
        ENDPORT
        ;
        ;
        PORT
              PORTNUM=2            ; Optonal but sets port number if
        stated
              ID=AX/IP/UDP            ; Displayed by PORTS command
              TYPE=EXTERNAL            ; Calls an external module
              DLLNAME=BPQAXIP.DLL      ; Uses BPQAXIP.DLL
              QUALITY=192            ; Setting to 0 stops node broadcasts
              MAXFRAME=7            ; Max outstanding frames (1 thru 7)
              FRACK=3000            ; Level 2 timout in milliseconds
              RESPTIME=1000            ; Level 2 delayed ack timer in
        milliseconds
              RETRIES=10            ; Level 2 maximum retry value
              PACLEN=236            ; Max = 236
        ENDPORT
        ;
        ;
        ROUTES:                        ; Locked routes
        ;
        ;      CALLSIGN,QUALITY,PORT[,MAXFRAME,FRACK,PACLEN]
        ;      The values in [...] if stated override the port defaults.
        ;
        ***                        ; Denotes end of locked routes
        ;
        ;      Applications supported:
        ;
        ;      The first three are reserved for BBS, HOST and REMOTE SYSOP.
        ;      Five additional applications, up to 12 bytes each, can be
        ;      defined as you wish. Applications beginning with a * are not
        ;      shown in the valid commands display.
        ;
        ;APPLICATIONS=DX,,*SYS      ;BBS=DX, no host, remote sysop=*SYS
        ;







        Yahoo! Groups Links










      Your message has been successfully submitted and would be delivered to recipients shortly.