RE: [BPQ32] Re: AGWtoBPQ Crash
There is a piece of the puzzle missing, AGWtoBPQ.exe is used for
programs that require
And expect to talk to AGWPE example AR Cluster CC Cluster, are you using
For another program?
Unless you are using AGWPE as a sound card TNC, I would only have the
TNC talk direct in Kiss
Mode to BPQ32 AGWPE at this port would just be another program that is
not needed (Interface)
The only thing I can think of that will make AGWtoBPQ crash is if the
TCP port is already
In use with another program with conflict.
Here I use BPQ32 to talk in KISS to my TNC'S
AGWtoBPQ.exe is used as an interface between BPQ32 and AR-Cluster on TCP
So this brings use to why you are using AGWtoBPQ.exe.
You can E-Mail direct to me mmelnik1@...
I assure you we will get it straightened out.
From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
Sent: Saturday, October 13, 2012 12:59 AM
Subject: [BPQ32] Re: AGWtoBPQ Crash
Hi Mike, I've run with BPQ AGWPE Kiss with TNCs. I also tried BPQ was
connected directly to the Kiss TNCs. In both variants crashes AGWtoBPW.
--- In BPQ32@yahoogroups.com, "Mike" <mmelnik1@...> wrote:
> Are you running AGWPE as an interface or sound card TNC and trying to
> run AGWtoBPQ.EXE also?
> Mike N9PMO
> -----Original Message-----
> From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf
> Sent: Thursday, October 11, 2012 10:42 AM
> To: BPQ32@yahoogroups.com
> Subject: [BPQ32] Re: AGWtoBPQ Crash
> Hi John,
> yes, agw to bpq crashes even if only one program is running.
> There is no error message. On Windows Server 2008 comes a requester to
> close the program. On Windows XP, the window closes without comment.
> I now go back to AGWPE. But I hope I can replace the AGWPE sometime by
> 73, Joachim
> --- In BPQ32@yahoogroups.com, John Wiseman <john.wiseman@> wrote:
> > Joachim,
> > Does agwtobpq crash if you run one of the programs at a time?
> > Do you get any error messages from agwtobpq?
> > 73, John G8BPQ
> > joachimnienstedt <joachimnienstedt@> wrote:
> > >Hi John and others
> > >my english is not so good but I want to try to explain my problem.
> > >I have installed BPQ32 5.2.91 on my PC. For some programs I want to
> use the AGWtoBPQ.exe.
> > >The programs are WPP (Windows Packet Program), AGWTracker, Paxon,
> etc. They are currently working very well with the AGWPE.
> > >Unfortunately the AGWtoBPQ crashes after some time when i use one
> my Packet programs. I tried it on different machines with different
> operating systems. Desktop PC with Windows 2008 Server RC2 64bit,
> Notebook with Windows XP Professional 32bit, Windows XP Professional
> 32bit on a virtual machine. The time to the crash is different. Times
> only a few seconds / minutes and then it works sometimes 30 minutes.
> I myself connect to other Stations the crash comes sooner than when I
> receive only. AQWtoBPQ is configured on port 8001 with 6 streams and
> APPLMask 0x6 for Application 2 and 3.
> > >I hope there is a solution to my problem, because I would like to
> the BPQ32.
> > >55/73 Joachim
> > >
> > >