Loading ...
Sorry, an error occurred while loading the content.
 

Re: TNC for the Raspberry PI

Expand Messages
  • Graham
    I would be interested in this information also, I am working with the TNC-X and a beagleboard. The direction I was going is using External Power for the TNC-X
    Message 1 of 13 , Aug 6, 2012
      I would be interested in this information also, I am working with the TNC-X and a beagleboard. The direction I was going is using External Power for the TNC-X along with the USB connection into the Beagleboard as I was not sure if a single 5V Power Adapter would be enough to power the Beagleboard and the TNC-X.

      As I just joined this group today, I am still looking through past messages to get up to speed on this as it has been many years since i have worked with Digital Modes in Amateur Radio.


      --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
      >
      > The full pinout of the PI 26 way is on the PI website. The are four
      > connections. Red and black for power and ground. The TNC is powered from the
      > PI. Green and white for TX and RX data (which way round depends on which end
      > you are looking from). TXD from the TNC goes via a resitive divider to drop
      > the 5V from the TNC to 3.3V for the PI.
      >
      > I'm planning to create a board including the PI connector, but if anyone
      > wants to experiment in the mean time I'll publish the mods to a standard
      > TNC-X.
      >
      > 73,
      > John.
      >
      > _____
      >
      > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Rick
      > Nicholson
      > Sent: 06 August 2012 03:57
      > To: BPQ32@yahoogroups.com
      > Subject: Re: [BPQ32] TNC for the Raspberry PI
      >
      >
      >
      >
      >
      > John
      >
      > Whats the pinout on the rasp pi? It looks like a green,brown and white wires
      > between the pi and tnc-x, Im gueesing thats power to the tnc-x?
      >
      > Rick/N9UMJ
      >
      > From: John Wiseman <john.wiseman@...>
      > To: BPQ32@yahoogroups.com
      > Sent: Sunday, August 5, 2012 8:55 AM
      > Subject: [BPQ32] TNC for the Raspberry PI
      >
      >
      >
      > Hi folks,
      >
      > I've got a modified TNC-X working with the PI. See photos
      >
      > <https://dl.dropbox.com/u/31910649/S1270002.JPG>
      > https://dl.dropbox.com/u/31910649/S1270002.JPG
      > <https://dl.dropbox.com/u/31910649/S1270003.JPG>
      > https://dl.dropbox.com/u/31910649/S1270003.JPG
      >
      > 73,
      > John
      >
    • Rick Nicholson
      Ok ,Thanks John..   Rick/n9umj ________________________________ From: John Wiseman To: BPQ32@yahoogroups.com Sent: Monday, August 6,
      Message 2 of 13 , Aug 6, 2012
        Ok ,Thanks John..
         
        Rick/n9umj

        From: John Wiseman <john.wiseman@...>
        To: BPQ32@yahoogroups.com
        Sent: Monday, August 6, 2012 2:35 AM
        Subject: RE: [BPQ32] TNC for the Raspberry PI

         
        I'm going to be away for a couple of days, but will publish more information whan I get back.
         
        73,
        John
         

        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of ve2hom Pascal
        Sent: 05 August 2012 15:03
        To: BPQ32@yahoogroups.com
        Subject: Re: [BPQ32] TNC for the Raspberry PI

         
        Hello John,
            Can you send me information about this.  I have order one rasberry pi and want to use it for packet. 

        Tnx
        73 de Pascal

        Le 05/08/12 08:55, John Wiseman a écrit :
        Hi folks,

        I've got a modified TNC-X working with the PI. See photos

        https://dl.dropbox.com/u/31910649/S1270002.JPG
        https://dl.dropbox.com/u/31910649/S1270003.JPG

        73,
        John


         


      • Rick Nicholson
        Thanks John    I been powering my pi with with a gigaware powered usb hub 2.0A @5v   That seems to provide enough power for the RSPi keyboard,mouse,monitor
        Message 3 of 13 , Aug 6, 2012
          Thanks John
           
           I been powering my pi with with a gigaware powered usb hub 2.0A @5v
           
          That seems to provide enough power for the RSPi keyboard,mouse,monitor and wireless adapter. I don't have the tnc-x yet. But that 's the direction I'd like to go with BPQ32 if the pi's prove dependable.
           
          I've been looking at the beagleboard for another pi project with dstar any tips  or links on the BB would be appreciated.
           
          Rick/n9umj

          From: Graham <gspearson@...>
          To: BPQ32@yahoogroups.com
          Sent: Monday, August 6, 2012 9:56 AM
          Subject: [BPQ32] Re: TNC for the Raspberry PI

           
          I would be interested in this information also, I am working with the TNC-X and a beagleboard. The direction I was going is using External Power for the TNC-X along with the USB connection into the Beagleboard as I was not sure if a single 5V Power Adapter would be enough to power the Beagleboard and the TNC-X.

          As I just joined this group today, I am still looking through past messages to get up to speed on this as it has been many years since i have worked with Digital Modes in Amateur Radio.

          --- In mailto:BPQ32%40yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
          >
          > The full pinout of the PI 26 way is on the PI website. The are four
          > connections. Red and black for power and ground. The TNC is powered from the
          > PI. Green and white for TX and RX data (which way round depends on which end
          > you are looking from). TXD from the TNC goes via a resitive divider to drop
          > the 5V from the TNC to 3.3V for the PI.
          >
          > I'm planning to create a board including the PI connector, but if anyone
          > wants to experiment in the mean time I'll publish the mods to a standard
          > TNC-X.
          >
          > 73,
          > John.
          >
          > _____
          >
          > From: mailto:BPQ32%40yahoogroups.com [mailto:mailto:BPQ32%40yahoogroups.com] On Behalf Of Rick
          > Nicholson
          > Sent: 06 August 2012 03:57
          > To: mailto:BPQ32%40yahoogroups.com
          > Subject: Re: [BPQ32] TNC for the Raspberry PI
          >
          >
          >
          >
          >
          > John
          >
          > Whats the pinout on the rasp pi? It looks like a green,brown and white wires
          > between the pi and tnc-x, Im gueesing thats power to the tnc-x?
          >
          > Rick/N9UMJ
          >
          > From: John Wiseman <john.wiseman@...>
          > To: mailto:BPQ32%40yahoogroups.com
          > Sent: Sunday, August 5, 2012 8:55 AM
          > Subject: [BPQ32] TNC for the Raspberry PI
          >
          >
          >
          > Hi folks,
          >
          > I've got a modified TNC-X working with the PI. See photos
          >
          > <https://dl.dropbox.com/u/31910649/S1270002.JPG>
          > https://dl.dropbox.com/u/31910649/S1270002.JPG
          > <https://dl.dropbox.com/u/31910649/S1270003.JPG>
          > https://dl.dropbox.com/u/31910649/S1270003.JPG
          >
          > 73,
          > John
          >



        • Jerry
          I received my two latest Pi today only been on order a week. COOL.. I have 4 now.. JK From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
          Message 4 of 13 , Aug 6, 2012

            I received my two latest Pi today only been on order a week.> COOL.. I have 4 now.. JK

             

            From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Rick Nicholson
            Sent: Monday, August 06, 2012 10:48 AM
            To: BPQ32@yahoogroups.com
            Subject: Re: [BPQ32] Re: TNC for the Raspberry PI

             

             

            Thanks John

             

             I been powering my pi with with a gigaware powered usb hub 2.0A @5v

             

            That seems to provide enough power for the RSPi keyboard,mouse,monitor and wireless adapter. I don't have the tnc-x yet. But that 's the direction I'd like to go with BPQ32 if the pi's prove dependable.

             

            I've been looking at the beagleboard for another pi project with dstar any tips  or links on the BB would be appreciated.

             

            Rick/n9umj

             

            From: Graham <gspearson@...>
            To: BPQ32@yahoogroups.com
            Sent: Monday, August 6, 2012 9:56 AM
            Subject: [BPQ32] Re: TNC for the Raspberry PI

             

             

            I would be interested in this information also, I am working with the TNC-X and a beagleboard. The direction I was going is using External Power for the TNC-X along with the USB connection into the Beagleboard as I was not sure if a single 5V Power Adapter would be enough to power the Beagleboard and the TNC-X.

            As I just joined this group today, I am still looking through past messages to get up to speed on this as it has been many years since i have worked with Digital Modes in Amateur Radio.

            --- In mailto:BPQ32%40yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
            >
            > The full pinout of the PI 26 way is on the PI website. The are four
            > connections. Red and black for power and ground. The TNC is powered from the
            > PI. Green and white for TX and RX data (which way round depends on which end
            > you are looking from). TXD from the TNC goes via a resitive divider to drop
            > the 5V from the TNC to 3.3V for the PI.
            >
            > I'm planning to create a board including the PI connector, but if anyone
            > wants to experiment in the mean time I'll publish the mods to a standard
            > TNC-X.
            >
            > 73,
            > John.
            >
            > _____
            >
            > From: mailto:BPQ32%40yahoogroups.com [mailto:mailto:BPQ32%40yahoogroups.com] On Behalf Of Rick
            > Nicholson
            > Sent: 06 August 2012 03:57
            > To: mailto:BPQ32%40yahoogroups.com
            > Subject: Re: [BPQ32] TNC for the Raspberry PI
            >
            >
            >
            >
            >
            > John
            >
            > Whats the pinout on the rasp pi? It looks like a green,brown and white wires
            > between the pi and tnc-x, Im gueesing thats power to the tnc-x?
            >
            > Rick/N9UMJ
            >
            > From: John Wiseman <john.wiseman@...>
            > To: mailto:BPQ32%40yahoogroups.com
            > Sent: Sunday, August 5, 2012 8:55 AM
            > Subject: [BPQ32] TNC for the Raspberry PI
            >
            >
            >
            > Hi folks,
            >
            > I've got a modified TNC-X working with the PI. See photos
            >
            > <https://dl.dropbox.com/u/31910649/S1270002.JPG>
            > https://dl.dropbox.com/u/31910649/S1270002.JPG
            > <https://dl.dropbox.com/u/31910649/S1270003.JPG>
            > https://dl.dropbox.com/u/31910649/S1270003.JPG
            >
            > 73,
            > John
            >

             

          • k7mch
            Still looking? I need a map address info for you. 73 de Mark
            Message 5 of 13 , Jun 11, 2013
              Still looking? I need a map address info for you.
              73 de Mark

              --- In BPQ32@yahoogroups.com, KB7RSI <kb7rsi@...> wrote:
              >
              > Catch me in chat tomorrow John. I'll forward with ya.
              >
              > Harold
              >
              > Sent from a smartphone. Owner makes typo's for sure.
              > On Jul 30, 2012 6:04 AM, "nv_desperado" <jdcollis@...> wrote:
              >
              > > **
              > >
              > >
              > > Hello to everyone. I'm setting up a new BPQ switch in Silver Springs,
              > > Nevada for our local hams. I'm looking for link/forwarding partners! If
              > > anyone is interested linking/forwarding with my system please send me a
              > > email.
              > >
              > > Thanks
              > >
              > > 73!
              > > John
              > > W7JDC
              > >
              > >
              > >
              >
            Your message has been successfully submitted and would be delivered to recipients shortly.