RE: [BPQ32] N9PMO Node/BBS Services
Yes I go threw a gateway for my 188.8.131.52 to ZL2AQY-1 184.108.40.206 gateway, but see no reason station
Could not be used, I am waiting on Road Runner this morning to solve the router problem then I would
Be more then happy to set it up.
I can provide you off the reflector Eddie’s gateway contact info if you would like.
In addition, I are setup with Eddie as a gateway and XR32 with no connect problems.
From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of wu3v@...
Sent: Saturday, July 28, 2012 8:12 PM
Subject: Re: [BPQ32] N9PMO Node/BBS Services
Mike do you have any 44 net connectivity?I dusted off my linux nos box and added later code from Maiko and the munge script. It is an old compaq evo with an 80gb drive and 1.5gb memory..
The pi box intrigues me I wonder if it can run the munge script? If so it could propagate the 44 net....
IT Manager and Broadcast Specialist
If so send me your 44 net route.
--- On Sat, 7/28/12, Mike Melnik <mmelnik1@...> wrote:
From: Mike Melnik <mmelnik1@...>
Subject: [BPQ32] N9PMO Node/BBS Services
Date: Saturday, July 28, 2012, 4:48 PM
for the users of N9PMO services, I am still dealing with router problems, Road Runner replaced the Modem with a Modem/Router as most
know this causes a big problem piggy backing Routers, after several calls I was able to get threw to them as to why inbound traffic
is being blocked, RR will be here tomorrow at 10:00 am and adding a Second stand-alone modem this will solve the problems, the reason for two modems is I have one phone Digital line, the newer modems with phone service all come with a router, I use a Home/Business router.
I tried having RR disable the firewall then try bridge mode with no
luck I managed to break the password and tried a few tricks also.
Thanks all for you patients