Loading ...
Sorry, an error occurred while loading the content.
 

Problem with APRS and Web Pages

Expand Messages
  • STEPHEN
    I did the last install all worked fine with the install. I added the html and aprs web pages. But the aprs seems to be not working. I added the following from
    Message 1 of 30 , Jun 10, 2012
      I did the last install all worked fine with the install. I added the html and aprs web pages. But the aprs seems to be not working.

      I added the following from example to the script:

      APRSDIGI

      APRSCall VE1MPF-10
      StatusMsg=BPQ32 IGate Moncton, New Brunswick, Canada

      Symbol=a ; Icon to display for station.
      Symset=B ; This is a "B" in a Red Diamond.

      ;
      ; Specify a Dest Addreess and Path for each port you want to use for APRS. No dest means receive only port
      ; Ports without an APRSPath statement will not be used by the Digi
      ;
      ; Note if you specify APRS as the destination call it will be replaced by the current BPQ32 APRS
      ; identification destination - APBPQ1. If you really want to send APRS, specify APRS-0.

      APRSPath 1= ; Receive only port
      ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
      ;APRSPath 9=APRS,WIDE1-1,WIDE2-1

      BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
      MobileBeaconInterval=2 ; Beacon interval when moving

      ; Define Crossport Digi. For each port, a list of ports to send a packet to (IS means send to APRS-IS)
      ; If a Digimap isn't specified for a port, digi out on the port the packet arrived on,
      ; and send to APRS-IS (if enabled)
      ; If you want to digi on same port, but not send to APRS-IS, Specify Digimap n=n
      ; If you dont want to digi on a port, specify Digimap n=
      ;
      ; If you only have one APRS port, you probably don't need a Digimap statement


      ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
      ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
      ;Digimap 9= ; Don't digi packets received on port 9

      ; Define Digipeating parameters

      TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
      FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
      DigiCalls=SKIG ; Calls for Normal (ie no SSID manipulation) Digi
      ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave out TraceCalls and FloodCalls

      ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the call to be left as it is received.

      MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is received with n greater than
      MaxFloodHops=2 ; this, the value will be replaced BEFORE it is decremented.

      ; Specify position. You can specify a fixed LAT/LONG, or use GPS

      LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
      LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)

      GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
      GPSSpeed=0 ; overriding the values set above.


      ; The Digi can generate Object and Item reports.

      ; The format is pretty strict - a single space between param=value pairs,
      ; a comma but no spaces in PATH and PORT string.

      ; Minimum interval is 10 mins. You can have as many OBJECT lines as you need.
      ; See thr APRS specification for information on how to format an Object or Item string.

      OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30 TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m

      ; IGATE Params. If specified you will gate RF packets and your beacons to APRS-IS

      ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an IPV6 Host
      ISPort=10152 ; Normal port for a filtered feed
      ISPasscode=17580 ; If you don't already have a passcode I can issue you one.
      ;
      ; You can specify a filter command to be sent when you log on to APRS-IS. Normally you don't
      ; need one. The APRS Mapping Application (BPQAPRS) sets a filter when it starts,
      ; and if you aren't running an APRS application, there isn't much point in getting info from APRS-IS
      ;
      ISFilter=m/50 ; Filter Command if needed

      ***
      ;

      The problem is it is not connecting to the aprs server. I have tried sever servers and I run the one I am trying to connect to and it is working.
      The second thing is the aprs pages I felt needed to be in a folder 'aprs' but would not work page not found it appears anything in the root works but not in a folder.

      do I have something wrong or am I missing something.

      Stephen
    • John Wiseman
      Stephen, You should probably comment out or change the FloodCalls, DigiCalls, and OBJECT statements. Usually the ISHOST is an APRS-IS server, but if the server
      Message 2 of 30 , Jun 10, 2012

        Stephen,

         

        You should probably comment out or change the FloodCalls, DigiCalls, and OBJECT statements.

         

        Usually the ISHOST is an APRS-IS server, but if the server you are running locally emulates an IS server, that should be ok. Do you get any error message on the console screen when you load bpa32?

         

        The APRS page templates should be directly in folder BPQAPRS/HTML – not a subfolder, under your BPQ32 config folder.

         

        73,

        John

         

        From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of STEPHEN
        Sent: 10 June 2012 15:52
        To: BPQ32@yahoogroups.com
        Subject: [BPQ32] Problem with APRS and Web Pages

         

         

        I did the last install all worked fine with the install. I added the html and aprs web pages. But the aprs seems to be not working.

        I added the following from example to the script:

        APRSDIGI

        APRSCall VE1MPF-10
        StatusMsg=BPQ32 IGate Moncton , New Brunswick , Canada

        Symbol=a ; Icon to display for station.
        Symset=B ; This is a "B" in a Red Diamond.

        ;
        ; Specify a Dest Addreess and Path for each port you want to use for APRS. No dest means receive only port
        ; Ports without an APRSPath statement will not be used by the Digi
        ;
        ; Note if you specify APRS as the destination call it will be replaced by the current BPQ32 APRS
        ; identification destination - APBPQ1. If you really want to send APRS, specify APRS-0.

        APRSPath 1= ; Receive only port
        ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
        ;APRSPath 9=APRS,WIDE1-1,WIDE2-1

        BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
        MobileBeaconInterval=2 ; Beacon interval when moving

        ; Define Crossport Digi. For each port, a list of ports to send a packet to (IS means send to APRS-IS)
        ; If a Digimap isn't specified for a port, digi out on the port the packet arrived on,
        ; and send to APRS-IS (if enabled)
        ; If you want to digi on same port, but not send to APRS-IS, Specify Digimap n=n
        ; If you dont want to digi on a port, specify Digimap n=
        ;
        ; If you only have one APRS port, you probably don't need a Digimap statement

        ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
        ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
        ;Digimap 9= ; Don't digi packets received on port 9

        ; Define Digipeating parameters

        TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
        FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
        DigiCalls=SKIG ; Calls for Normal (ie no SSID manipulation) Digi
        ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave out TraceCalls and FloodCalls

        ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the call to be left as it is received.

        MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is received with n greater than
        MaxFloodHops=2 ; this, the value will be replaced BEFORE it is decremented.

        ; Specify position. You can specify a fixed LAT/LONG, or use GPS

        LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
        LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)

        GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
        GPSSpeed=0 ; overriding the values set above.

        ; The Digi can generate Object and Item reports.

        ; The format is pretty strict - a single space between param=value pairs,
        ; a comma but no spaces in PATH and PORT string.

        ; Minimum interval is 10 mins. You can have as many OBJECT lines as you need.
        ; See thr APRS specification for information on how to format an Object or Item string.

        OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30 TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m

        ; IGATE Params. If specified you will gate RF packets and your beacons to APRS-IS

        ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an IPV6 Host
        ISPort=10152 ; Normal port for a filtered feed
        ISPasscode=17580 ; If you don't already have a passcode I can issue you one.
        ;
        ; You can specify a filter command to be sent when you log on to APRS-IS. Normally you don't
        ; need one. The APRS Mapping Application (BPQAPRS) sets a filter when it starts,
        ; and if you aren't running an APRS application, there isn't much point in getting info from APRS-IS
        ;
        ISFilter=m/50 ; Filter Command if needed

        ***
        ;

        The problem is it is not connecting to the aprs server. I have tried sever servers and I run the one I am trying to connect to and it is working.
        The second thing is the aprs pages I felt needed to be in a folder 'aprs' but would not work page not found it appears anything in the root works but not in a folder.

        do I have something wrong or am I missing something.

        Stephen

      • STEPHEN
        John I am running javAPRSSrvr 3.15b08 that should be fine. http://www.ve9sc.com:14501/ I know this works as i looked at Jerry s http://w9bbs.no-ip.org:8080/
        Message 3 of 30 , Jun 10, 2012
          John

          I am running javAPRSSrvr 3.15b08 that should be fine.
          http://www.ve9sc.com:14501/

          I know this works as i looked at Jerry's
          http://w9bbs.no-ip.org:8080/ and it is working.

          I comment out FloodCalls, DigiCalls, and OBJECT statementsas you stated.

          Restarted BPQ and it still will not connect to the aprs server. I tried other servers but they will not work either. I tried:


          The Main APRS servers "First" & "Second" etc.

          The console screen is fine no errors. It states :

          APRS/Digi/Gateway Enabled

          I have all the html file in the html folder no subfolders the link

          http://www.ve9sc.com:84/Node/Routes.html

          try the aprs link it will not work nor will that link "APRS" from any of the node pages.

          But http://www.ve9sc.com:84/allrf.html works if appears the link is adding a folder aprs.
          http://www.ve9sc.com:84/aprs/all.html

          I looked at the debug log


          120610 00:00:02 ! |Enter HouseKeeping
          120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 02:07:37 ! Too Many Program Errors - Closing
          120610 02:07:37 ! Attempting to Restart C:\Program Files\BPQ32\BPQMailChat.exe
          120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to HouseKeeping 78674
          120610 02:08:46 ! Program Starting
          120610 02:08:46 ! BPQMailChat Starting
          120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 06:23:18 ! Too Many Program Errors - Closing
          120610 06:23:18 ! Attempting to Restart C:\Program Files\BPQ32\BPQMailChat.exe
          120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to HouseKeeping 63324
          120610 06:24:36 ! Program Starting
          120610 06:24:36 ! BPQMailChat Starting
          120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 10:39:05 ! Too Many Program Errors - Closing
          120610 10:39:05 ! Attempting to Restart C:\Program Files\BPQ32\BPQMailChat.exe
          120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to HouseKeeping 47986
          120610 10:40:14 ! Program Starting
          120610 10:40:14 ! BPQMailChat Starting
          120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 14:54:44 ! Too Many Program Errors - Closing
          120610 14:54:44 ! Attempting to Restart C:\Program Files\BPQ32\BPQMailChat.exe
          120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to HouseKeeping 32644
          120610 14:55:56 ! Program Starting
          120610 14:55:56 ! BPQMailChat Starting
          120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
          120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170

          I am not sure where to go from here.

          Stephen


          --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
          >
          > Stephen,
          >
          >
          >
          > You should probably comment out or change the FloodCalls, DigiCalls, and
          > OBJECT statements.
          >
          >
          >
          > Usually the ISHOST is an APRS-IS server, but if the server you are running
          > locally emulates an IS server, that should be ok. Do you get any error
          > message on the console screen when you load bpa32?
          >
          >
          >
          > The APRS page templates should be directly in folder BPQAPRS/HTML - not a
          > subfolder, under your BPQ32 config folder.
          >
          >
          >
          > 73,
          >
          > John
          >
          >
          >
          > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
          > STEPHEN
          > Sent: 10 June 2012 15:52
          > To: BPQ32@yahoogroups.com
          > Subject: [BPQ32] Problem with APRS and Web Pages
          >
          >
          >
          >
          >
          > I did the last install all worked fine with the install. I added the html
          > and aprs web pages. But the aprs seems to be not working.
          >
          > I added the following from example to the script:
          >
          > APRSDIGI
          >
          > APRSCall VE1MPF-10
          > StatusMsg=BPQ32 IGate Moncton, New Brunswick, Canada
          >
          > Symbol=a ; Icon to display for station.
          > Symset=B ; This is a "B" in a Red Diamond.
          >
          > ;
          > ; Specify a Dest Addreess and Path for each port you want to use for APRS.
          > No dest means receive only port
          > ; Ports without an APRSPath statement will not be used by the Digi
          > ;
          > ; Note if you specify APRS as the destination call it will be replaced by
          > the current BPQ32 APRS
          > ; identification destination - APBPQ1. If you really want to send APRS,
          > specify APRS-0.
          >
          > APRSPath 1= ; Receive only port
          > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
          > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
          >
          > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
          > MobileBeaconInterval=2 ; Beacon interval when moving
          >
          > ; Define Crossport Digi. For each port, a list of ports to send a packet to
          > (IS means send to APRS-IS)
          > ; If a Digimap isn't specified for a port, digi out on the port the packet
          > arrived on,
          > ; and send to APRS-IS (if enabled)
          > ; If you want to digi on same port, but not send to APRS-IS, Specify Digimap
          > n=n
          > ; If you dont want to digi on a port, specify Digimap n=
          > ;
          > ; If you only have one APRS port, you probably don't need a Digimap
          > statement
          >
          > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
          > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
          > ;Digimap 9= ; Don't digi packets received on port 9
          >
          > ; Define Digipeating parameters
          >
          > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
          > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
          > DigiCalls=SKIG ; Calls for Normal (ie no SSID manipulation) Digi
          > ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave out
          > TraceCalls and FloodCalls
          >
          > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the
          > call to be left as it is received.
          >
          > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is
          > received with n greater than
          > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is decremented.
          >
          > ; Specify position. You can specify a fixed LAT/LONG, or use GPS
          >
          > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
          > LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)
          >
          > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
          > GPSSpeed=0 ; overriding the values set above.
          >
          > ; The Digi can generate Object and Item reports.
          >
          > ; The format is pretty strict - a single space between param=value pairs,
          > ; a comma but no spaces in PATH and PORT string.
          >
          > ; Minimum interval is 10 mins. You can have as many OBJECT lines as you
          > need.
          > ; See thr APRS specification for information on how to format an Object or
          > Item string.
          >
          > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
          > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
          >
          > ; IGATE Params. If specified you will gate RF packets and your beacons to
          > APRS-IS
          >
          > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an IPV6 Host
          > ISPort=10152 ; Normal port for a filtered feed
          > ISPasscode=17580 ; If you don't already have a passcode I can issue you one.
          > ;
          > ; You can specify a filter command to be sent when you log on to APRS-IS.
          > Normally you don't
          > ; need one. The APRS Mapping Application (BPQAPRS) sets a filter when it
          > starts,
          > ; and if you aren't running an APRS application, there isn't much point in
          > getting info from APRS-IS
          > ;
          > ISFilter=m/50 ; Filter Command if needed
          >
          > ***
          > ;
          >
          > The problem is it is not connecting to the aprs server. I have tried sever
          > servers and I run the one I am trying to connect to and it is working.
          > The second thing is the aprs pages I felt needed to be in a folder 'aprs'
          > but would not work page not found it appears anything in the root works but
          > not in a folder.
          >
          > do I have something wrong or am I missing something.
          >
          > Stephen
          >
        • Mike Melnik
          Steve One command that has changed since earlier release is: ISFilter=m/50 ; Filter Command if needed This is now located in the Basic setup (APRS Window) IS
          Message 4 of 30 , Jun 10, 2012
            Steve

            One command that has changed since earlier release is:
            ISFilter=m/50 ; Filter Command if needed

            This is now located in the Basic setup (APRS Window) IS Filter
            The other command is your host, I use:
            ISHost=ROTATE.APRS.NET
            ISPort=14580

            Open your BPQ Console window MDI, and then look at the BPQ32 DLL Console
            window I think you will see
            The errors.

            But I am no further then the beginning of trying to make the APRS Web Server
            work.
            Mike-N9PMO
            www.n9pmo.com
            -----Original Message-----
            From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
            STEPHEN
            Sent: Sunday, June 10, 2012 9:52 AM
            To: BPQ32@yahoogroups.com
            Subject: [BPQ32] Problem with APRS and Web Pages

             
            I did the last install all worked fine with the install. I added the html
            and aprs web pages. But the aprs seems to be not working.

            I added the following from example to the script:

            APRSDIGI

            APRSCall VE1MPF-10
            StatusMsg=BPQ32 IGate Moncton, New Brunswick, Canada

            Symbol=a ; Icon to display for station.
            Symset=B ; This is a "B" in a Red Diamond.

            ;
            ; Specify a Dest Addreess and Path for each port you want to use for APRS.
            No dest means receive only port
            ; Ports without an APRSPath statement will not be used by the Digi
            ;
            ; Note if you specify APRS as the destination call it will be replaced by
            the current BPQ32 APRS
            ; identification destination - APBPQ1. If you really want to send APRS,
            specify APRS-0.

            APRSPath 1= ; Receive only port
            ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
            ;APRSPath 9=APRS,WIDE1-1,WIDE2-1

            BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
            MobileBeaconInterval=2 ; Beacon interval when moving

            ; Define Crossport Digi. For each port, a list of ports to send a packet to
            (IS means send to APRS-IS)
            ; If a Digimap isn't specified for a port, digi out on the port the packet
            arrived on,
            ; and send to APRS-IS (if enabled)
            ; If you want to digi on same port, but not send to APRS-IS, Specify Digimap
            n=n
            ; If you dont want to digi on a port, specify Digimap n=
            ;
            ; If you only have one APRS port, you probably don't need a Digimap
            statement

            ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
            ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
            ;Digimap 9= ; Don't digi packets received on port 9

            ; Define Digipeating parameters

            TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
            FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
            DigiCalls=SKIG ; Calls for Normal (ie no SSID manipulation) Digi
            ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave out
            TraceCalls and FloodCalls

            ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the
            call to be left as it is received.

            MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is
            received with n greater than
            MaxFloodHops=2 ; this, the value will be replaced BEFORE it is decremented.

            ; Specify position. You can specify a fixed LAT/LONG, or use GPS

            LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
            LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)

            GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
            GPSSpeed=0 ; overriding the values set above.

            ; The Digi can generate Object and Item reports.

            ; The format is pretty strict - a single space between param=value pairs,
            ; a comma but no spaces in PATH and PORT string.

            ; Minimum interval is 10 mins. You can have as many OBJECT lines as you
            need.
            ; See thr APRS specification for information on how to format an Object or
            Item string.

            OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
            TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m

            ; IGATE Params. If specified you will gate RF packets and your beacons to
            APRS-IS

            ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an IPV6 Host
            ISPort=10152 ; Normal port for a filtered feed
            ISPasscode=17580 ; If you don't already have a passcode I can issue you one.
            ;
            ; You can specify a filter command to be sent when you log on to APRS-IS.
            Normally you don't
            ; need one. The APRS Mapping Application (BPQAPRS) sets a filter when it
            starts,
            ; and if you aren't running an APRS application, there isn't much point in
            getting info from APRS-IS
            ;
            ISFilter=m/50 ; Filter Command if needed

            ***
            ;

            The problem is it is not connecting to the aprs server. I have tried sever
            servers and I run the one I am trying to connect to and it is working.
            The second thing is the aprs pages I felt needed to be in a folder 'aprs'
            but would not work page not found it appears anything in the root works but
            not in a folder.

            do I have something wrong or am I missing something.

            Stephen
          • John Wiseman
            Stephen, http://www.ve9sc.com:84/allrf.html isn t really working. The HTML is returned, but the APRS data isn t being placed in the page. This suggests to me
            Message 5 of 30 , Jun 10, 2012

              Stephen,

               

              http://www.ve9sc.com:84/allrf.html isn’t really working. The HTML is returned, but the APRS data isn’t being placed in the page. This suggests to me that you have the APRS pages in BPQ32/HTML, not BPQ32/BPQAPRS/HTML.

               

              Check that the “Enable Igate” checkbox on the bpq32.dll console window is checked. It should be set by default, but if it gets unset, the code won’t connect.

               

              I don’t know why MailChat is giving a program error in Socket Data every 10 minutes, but this isn’t related to the Web Server – it is most likely the POP3 server trying to retrieve a message, and being upset by what it gets. The LOG_TCP.txt file may give a clue as to what is going on.

               

              73,

              John

               

               

               

               


              From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of STEPHEN
              Sent: 10 June 2012 16:46
              To: BPQ32@yahoogroups.com
              Subject: [BPQ32] Re: Problem with APRS and Web Pages

               

               

              John

              I am running javAPRSSrvr 3.15b08 that should be fine.
              http://www.ve9sc.com:14501/

              I know this works as i looked at Jerry's
              http://w9bbs.no-ip.org:8080/ and it is working.

              I comment out FloodCalls, DigiCalls, and OBJECT statementsas you stated.

              Restarted BPQ and it still will not connect to the aprs server. I tried other servers but they will not work either. I tried:

              The Main APRS servers "First" & "Second" etc.

              The console screen is fine no errors. It states :

              APRS/Digi/Gateway Enabled

              I have all the html file in the html folder no subfolders the link

              http://www.ve9sc.com:84/Node/Routes.html

              try the aprs link it will not work nor will that link "APRS" from any of the node pages.

              But http://www.ve9sc.com:84/allrf.html works if appears the link is adding a folder aprs.
              http://www.ve9sc.com:84/aprs/all.html

              I looked at the debug log

              120610 00:00:02 ! |Enter HouseKeeping
              120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 02:07:37 ! Too Many Program Errors - Closing
              120610 02:07:37 ! Attempting to Restart C:\Program Files\BPQ32\BPQMailChat.exe
              120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to HouseKeeping 78674
              120610 02:08:46 ! Program Starting
              120610 02:08:46 ! BPQMailChat Starting
              120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 06:23:18 ! Too Many Program Errors - Closing
              120610 06:23:18 ! Attempting to Restart C:\Program Files\BPQ32\BPQMailChat.exe
              120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to HouseKeeping 63324
              120610 06:24:36 ! Program Starting
              120610 06:24:36 ! BPQMailChat Starting
              120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 10:39:05 ! Too Many Program Errors - Closing
              120610 10:39:05 ! Attempting to Restart C:\Program Files\BPQ32\BPQMailChat.exe
              120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to HouseKeeping 47986
              120610 10:40:14 ! Program Starting
              120610 10:40:14 ! BPQMailChat Starting
              120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 14:54:44 ! Too Many Program Errors - Closing
              120610 14:54:44 ! Attempting to Restart C:\Program Files\BPQ32\BPQMailChat.exe
              120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to HouseKeeping 32644
              120610 14:55:56 ! Program Starting
              120610 14:55:56 ! BPQMailChat Starting
              120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
              120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445 in Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170

              I am not sure where to go from here.

              Stephen

              --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:

              >
              > Stephen,
              >
              >
              >
              > You should probably comment out or change the FloodCalls, DigiCalls, and
              > OBJECT statements.
              >
              >
              >
              > Usually the ISHOST is an APRS-IS server, but if the server you are running
              > locally emulates an IS server, that should be ok. Do you get any error
              > message on the console screen when you load bpa32?
              >
              >
              >
              > The APRS page templates should be directly in folder BPQAPRS/HTML - not a
              > subfolder, under your BPQ32 config folder.
              >
              >
              >
              > 73,
              >
              > John
              >
              >
              >
              > From: BPQ32@yahoogroups.com
              [mailto:BPQ32@yahoogroups.com] On Behalf Of
              > STEPHEN
              > Sent: 10 June 2012 15:52
              > To: BPQ32@yahoogroups.com
              > Subject: [BPQ32] Problem with APRS and Web Pages
              >
              >
              >
              >
              >
              > I did the last install all worked fine with the install. I added the html
              > and aprs web pages. But the aprs seems to be not working.
              >
              > I added the following from example to the script:
              >
              > APRSDIGI
              >
              > APRSCall VE1MPF-10
              > StatusMsg=BPQ32 IGate Moncton ,
              New Brunswick , Canada
              >
              > Symbol=a ; Icon to display for station.
              > Symset=B ; This is a "B" in a Red Diamond.
              >
              > ;
              > ; Specify a Dest Addreess and Path for each port you want to use for APRS.
              > No dest means receive only port
              > ; Ports without an APRSPath statement will not be used by the Digi
              > ;
              > ; Note if you specify APRS as the destination call it will be replaced by
              > the current BPQ32 APRS
              > ; identification destination - APBPQ1. If you really want to send APRS,
              > specify APRS-0.
              >
              > APRSPath 1= ; Receive only port
              > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
              > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
              >
              > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
              > MobileBeaconInterval=2 ; Beacon interval when moving
              >
              > ; Define Crossport Digi. For each port, a list of ports to send a packet
              to
              > (IS means send to APRS-IS)
              > ; If a Digimap isn't specified for a port, digi out on the port the packet
              > arrived on,
              > ; and send to APRS-IS (if enabled)
              > ; If you want to digi on same port, but not send to APRS-IS, Specify
              Digimap
              > n=n
              > ; If you dont want to digi on a port, specify Digimap n=
              > ;
              > ; If you only have one APRS port, you probably don't need a Digimap
              > statement
              >
              > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
              > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
              > ;Digimap 9= ; Don't digi packets received on port 9
              >
              > ; Define Digipeating parameters
              >
              > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
              > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
              > DigiCalls=SKIG ; Calls for Normal
              (ie no SSID manipulation) Digi
              > ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave
              out
              > TraceCalls and FloodCalls
              >
              > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the
              > call to be left as it is received.
              >
              > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is
              > received with n greater than
              > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is
              decremented.
              >
              > ; Specify position. You can specify a fixed LAT/LONG, or use GPS
              >
              > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
              > LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)
              >
              > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
              > GPSSpeed=0 ; overriding the values set above.
              >
              > ; The Digi can generate Object and Item reports.
              >
              > ; The format is pretty strict - a single space between param=value pairs,
              > ; a comma but no spaces in PATH and PORT string.
              >
              > ; Minimum interval is 10 mins. You can have as many OBJECT lines as you
              > need.
              > ; See thr APRS specification for information on how to format an Object or
              > Item string.
              >
              > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
              > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
              >
              > ; IGATE Params. If specified you will gate RF packets and your beacons to
              > APRS-IS
              >
              > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an IPV6
              Host
              > ISPort=10152 ; Normal port for a filtered
              feed
              > ISPasscode=17580 ; If you don't already have a passcode I can issue you
              one.
              > ;
              > ; You can specify a filter command to be sent when you log on to APRS-IS.
              > Normally you don't
              > ; need one. The APRS Mapping Application (BPQAPRS) sets a filter when it
              > starts,
              > ; and if you aren't running an APRS application, there isn't much point in
              > getting info from APRS-IS
              > ;
              > ISFilter=m/50 ; Filter Command if needed
              >
              > ***
              > ;
              >
              > The problem is it is not connecting to the aprs server. I have tried sever
              > servers and I run the one I am trying to connect to and it is working.
              > The second thing is the aprs pages I felt needed to be in a folder 'aprs'
              > but would not work page not found it appears anything in the root works but
              > not in a folder.
              >
              > do I have something wrong or am I missing something.
              >
              > Stephen
              >

            • STEPHEN
              John we are getting closer The aprs pages are working but I still will not connect to the APRS server You stated Check that the Enable Igate checkbox on the
              Message 6 of 30 , Jun 10, 2012
                John
                we are getting closer
                The aprs pages are working but I still will not connect to the APRS server
                You stated "Check that the "Enable Igate" checkbox on the bpq32.dll console window is checked."

                I don't see a Enable Igate on the bpq32.dll window?

                I also changed the server as Mike stated.

                Thanks


                --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
                >
                > Stephen,
                >
                >
                >
                > http://www.ve9sc.com:84/allrf.html isn't really working. The HTML is
                > returned, but the APRS data isn't being placed in the page. This suggests to
                > me that you have the APRS pages in BPQ32/HTML, not BPQ32/BPQAPRS/HTML.
                >
                >
                >
                > Check that the "Enable Igate" checkbox on the bpq32.dll console window is
                > checked. It should be set by default, but if it gets unset, the code won't
                > connect.
                >
                >
                >
                > I don't know why MailChat is giving a program error in Socket Data every 10
                > minutes, but this isn't related to the Web Server - it is most likely the
                > POP3 server trying to retrieve a message, and being upset by what it gets.
                > The LOG_TCP.txt file may give a clue as to what is going on.
                >
                >
                >
                > 73,
                >
                > John
                >
                >
                >
                >
                >
                >
                >
                >
                >
                > _____
                >
                > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                > STEPHEN
                > Sent: 10 June 2012 16:46
                > To: BPQ32@yahoogroups.com
                > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                >
                >
                >
                >
                >
                > John
                >
                > I am running javAPRSSrvr 3.15b08 that should be fine.
                > http://www.ve9sc.com:14501/
                >
                > I know this works as i looked at Jerry's
                > http://w9bbs.no-ip.org:8080/ and it is working.
                >
                > I comment out FloodCalls, DigiCalls, and OBJECT statementsas you stated.
                >
                > Restarted BPQ and it still will not connect to the aprs server. I tried
                > other servers but they will not work either. I tried:
                >
                > The Main APRS servers "First" & "Second" etc.
                >
                > The console screen is fine no errors. It states :
                >
                > APRS/Digi/Gateway Enabled
                >
                > I have all the html file in the html folder no subfolders the link
                >
                > http://www.ve9sc.com:84/Node/Routes.html
                >
                > try the aprs link it will not work nor will that link "APRS" from any of the
                > node pages.
                >
                > But http://www.ve9sc.com:84/allrf.html works if appears the link is adding a
                > folder aprs.
                > http://www.ve9sc.com:84/aprs/all.html
                >
                > I looked at the debug log
                >
                > 120610 00:00:02 ! |Enter HouseKeeping
                > 120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 02:07:37 ! Too Many Program Errors - Closing
                > 120610 02:07:37 ! Attempting to Restart C:\Program
                > Files\BPQ32\BPQMailChat.exe
                > 120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to HouseKeeping
                > 78674
                > 120610 02:08:46 ! Program Starting
                > 120610 02:08:46 ! BPQMailChat Starting
                > 120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 06:23:18 ! Too Many Program Errors - Closing
                > 120610 06:23:18 ! Attempting to Restart C:\Program
                > Files\BPQ32\BPQMailChat.exe
                > 120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to HouseKeeping
                > 63324
                > 120610 06:24:36 ! Program Starting
                > 120610 06:24:36 ! BPQMailChat Starting
                > 120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 10:39:05 ! Too Many Program Errors - Closing
                > 120610 10:39:05 ! Attempting to Restart C:\Program
                > Files\BPQ32\BPQMailChat.exe
                > 120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to HouseKeeping
                > 47986
                > 120610 10:40:14 ! Program Starting
                > 120610 10:40:14 ! BPQMailChat Starting
                > 120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 14:54:44 ! Too Many Program Errors - Closing
                > 120610 14:54:44 ! Attempting to Restart C:\Program
                > Files\BPQ32\BPQMailChat.exe
                > 120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to HouseKeeping
                > 32644
                > 120610 14:55:56 ! Program Starting
                > 120610 14:55:56 ! BPQMailChat Starting
                > 120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                > 120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                >
                > I am not sure where to go from here.
                >
                > Stephen
                >
                > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "John
                > Wiseman" <john.wiseman@> wrote:
                > >
                > > Stephen,
                > >
                > >
                > >
                > > You should probably comment out or change the FloodCalls, DigiCalls, and
                > > OBJECT statements.
                > >
                > >
                > >
                > > Usually the ISHOST is an APRS-IS server, but if the server you are running
                > > locally emulates an IS server, that should be ok. Do you get any error
                > > message on the console screen when you load bpa32?
                > >
                > >
                > >
                > > The APRS page templates should be directly in folder BPQAPRS/HTML - not a
                > > subfolder, under your BPQ32 config folder.
                > >
                > >
                > >
                > > 73,
                > >
                > > John
                > >
                > >
                > >
                > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                > Of
                > > STEPHEN
                > > Sent: 10 June 2012 15:52
                > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                > > Subject: [BPQ32] Problem with APRS and Web Pages
                > >
                > >
                > >
                > >
                > >
                > > I did the last install all worked fine with the install. I added the html
                > > and aprs web pages. But the aprs seems to be not working.
                > >
                > > I added the following from example to the script:
                > >
                > > APRSDIGI
                > >
                > > APRSCall VE1MPF-10
                > > StatusMsg=BPQ32 IGate Moncton, New Brunswick, Canada
                > >
                > > Symbol=a ; Icon to display for station.
                > > Symset=B ; This is a "B" in a Red Diamond.
                > >
                > > ;
                > > ; Specify a Dest Addreess and Path for each port you want to use for APRS.
                > > No dest means receive only port
                > > ; Ports without an APRSPath statement will not be used by the Digi
                > > ;
                > > ; Note if you specify APRS as the destination call it will be replaced by
                > > the current BPQ32 APRS
                > > ; identification destination - APBPQ1. If you really want to send APRS,
                > > specify APRS-0.
                > >
                > > APRSPath 1= ; Receive only port
                > > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
                > > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
                > >
                > > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
                > > MobileBeaconInterval=2 ; Beacon interval when moving
                > >
                > > ; Define Crossport Digi. For each port, a list of ports to send a packet
                > to
                > > (IS means send to APRS-IS)
                > > ; If a Digimap isn't specified for a port, digi out on the port the packet
                > > arrived on,
                > > ; and send to APRS-IS (if enabled)
                > > ; If you want to digi on same port, but not send to APRS-IS, Specify
                > Digimap
                > > n=n
                > > ; If you dont want to digi on a port, specify Digimap n=
                > > ;
                > > ; If you only have one APRS port, you probably don't need a Digimap
                > > statement
                > >
                > > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
                > > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
                > > ;Digimap 9= ; Don't digi packets received on port 9
                > >
                > > ; Define Digipeating parameters
                > >
                > > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
                > > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
                > > DigiCalls=SKIG ; Calls for Normal (ie no SSID manipulation) Digi
                > > ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave out
                > > TraceCalls and FloodCalls
                > >
                > > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the
                > > call to be left as it is received.
                > >
                > > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is
                > > received with n greater than
                > > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is
                > decremented.
                > >
                > > ; Specify position. You can specify a fixed LAT/LONG, or use GPS
                > >
                > > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
                > > LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)
                > >
                > > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
                > > GPSSpeed=0 ; overriding the values set above.
                > >
                > > ; The Digi can generate Object and Item reports.
                > >
                > > ; The format is pretty strict - a single space between param=value pairs,
                > > ; a comma but no spaces in PATH and PORT string.
                > >
                > > ; Minimum interval is 10 mins. You can have as many OBJECT lines as you
                > > need.
                > > ; See thr APRS specification for information on how to format an Object or
                > > Item string.
                > >
                > > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
                > > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
                > >
                > > ; IGATE Params. If specified you will gate RF packets and your beacons to
                > > APRS-IS
                > >
                > > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an IPV6
                > Host
                > > ISPort=10152 ; Normal port for a filtered feed
                > > ISPasscode=17580 ; If you don't already have a passcode I can issue you
                > one.
                > > ;
                > > ; You can specify a filter command to be sent when you log on to APRS-IS.
                > > Normally you don't
                > > ; need one. The APRS Mapping Application (BPQAPRS) sets a filter when it
                > > starts,
                > > ; and if you aren't running an APRS application, there isn't much point in
                > > getting info from APRS-IS
                > > ;
                > > ISFilter=m/50 ; Filter Command if needed
                > >
                > > ***
                > > ;
                > >
                > > The problem is it is not connecting to the aprs server. I have tried sever
                > > servers and I run the one I am trying to connect to and it is working.
                > > The second thing is the aprs pages I felt needed to be in a folder 'aprs'
                > > but would not work page not found it appears anything in the root works
                > but
                > > not in a folder.
                > >
                > > do I have something wrong or am I missing something.
                > >
                > > Stephen
                > >
                >
              • John Wiseman
                Stephen You should have something like If the Igate line isn t there, then something very odd is going on - it suggests the APRS config was rejected, but it
                Message 7 of 30 , Jun 10, 2012

                  Stephen

                   

                  You should have something like

                   

                   

                  If the Igate line isn’t there, then something very odd is going on – it suggests the APRS config was rejected, but it that case there should be error messages in the console window.

                   

                  Did you get “APRS Digi/Gateway Enabled” on the console window (after the “ Initialising Port … “ messages)?

                   

                  73

                  John

                   


                  From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of STEPHEN
                  Sent: 10 June 2012 17:57
                  To: BPQ32@yahoogroups.com
                  Subject: [BPQ32] Re: Problem with APRS and Web Pages

                   

                   

                  John
                  we are getting closer
                  The aprs pages are working but I still will not connect to the APRS server
                  You stated "Check that the "Enable Igate" checkbox on the bpq32.dll console window is checked."

                  I don't see a Enable Igate on the bpq32.dll window?

                  I also changed the server as Mike stated.

                  Thanks

                  --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:

                  >
                  > Stephen,
                  >
                  >
                  >
                  > http://www.ve9sc.com:84/allrf.html
                  isn't really working. The HTML is
                  > returned, but the APRS data isn't being placed in the page. This suggests
                  to
                  > me that you have the APRS pages in BPQ32/HTML, not BPQ32/BPQAPRS/HTML.
                  >
                  >
                  >
                  > Check that the "Enable Igate" checkbox on the bpq32.dll console
                  window is
                  > checked. It should be set by default, but if it gets unset, the code won't
                  > connect.
                  >
                  >
                  >
                  > I don't know why MailChat is giving a program error in Socket Data every
                  10
                  > minutes, but this isn't related to the Web Server - it is most likely the
                  > POP3 server trying to retrieve a message, and being upset by what it gets.
                  > The LOG_TCP.txt file may give a clue as to what is going on.
                  >
                  >
                  >
                  > 73,
                  >
                  > John
                  >
                  >
                  >
                  >
                  >
                  >
                  >
                  >
                  >
                  > _____
                  >
                  > From: BPQ32@yahoogroups.com
                  [mailto:BPQ32@yahoogroups.com] On Behalf Of
                  > STEPHEN
                  > Sent: 10 June 2012 16:46
                  > To: BPQ32@yahoogroups.com
                  > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                  >
                  >
                  >
                  >
                  >
                  > John
                  >
                  > I am running javAPRSSrvr 3.15b08 that should be fine.
                  > http://www.ve9sc.com:14501/
                  >
                  > I know this works as i looked at Jerry's
                  > http://w9bbs.no-ip.org:8080/
                  and it is working.
                  >
                  > I comment out FloodCalls, DigiCalls, and OBJECT statementsas you stated.
                  >
                  > Restarted BPQ and it still will not connect to the aprs server. I tried
                  > other servers but they will not work either. I tried:
                  >
                  > The Main APRS servers "First" & "Second" etc.
                  >
                  > The console screen is fine no errors. It states :
                  >
                  > APRS/Digi/Gateway Enabled
                  >
                  > I have all the html file in the html folder no subfolders the link
                  >
                  > http://www.ve9sc.com:84/Node/Routes.html
                  >
                  > try the aprs link it will not work nor will that link "APRS"
                  from any of the
                  > node pages.
                  >
                  > But http://www.ve9sc.com:84/allrf.html
                  works if appears the link is adding a
                  > folder aprs.
                  > http://www.ve9sc.com:84/aprs/all.html
                  >
                  > I looked at the debug log
                  >
                  > 120610 00:00:02 ! |Enter HouseKeeping
                  > 120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 02:07:37 ! Too Many Program Errors - Closing
                  > 120610 02:07:37 ! Attempting to Restart C:\Program
                  > Files\BPQ32\BPQMailChat.exe
                  > 120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to
                  HouseKeeping
                  > 78674
                  > 120610 02:08:46 ! Program Starting
                  > 120610 02:08:46 ! BPQMailChat Starting
                  > 120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 06:23:18 ! Too Many Program Errors - Closing
                  > 120610 06:23:18 ! Attempting to Restart C:\Program
                  > Files\BPQ32\BPQMailChat.exe
                  > 120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to
                  HouseKeeping
                  > 63324
                  > 120610 06:24:36 ! Program Starting
                  > 120610 06:24:36 ! BPQMailChat Starting
                  > 120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 10:39:05 ! Too Many Program Errors - Closing
                  > 120610 10:39:05 ! Attempting to Restart C:\Program
                  > Files\BPQ32\BPQMailChat.exe
                  > 120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to
                  HouseKeeping
                  > 47986
                  > 120610 10:40:14 ! Program Starting
                  > 120610 10:40:14 ! BPQMailChat Starting
                  > 120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 14:54:44 ! Too Many Program Errors - Closing
                  > 120610 14:54:44 ! Attempting to Restart C:\Program
                  > Files\BPQ32\BPQMailChat.exe
                  > 120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to
                  HouseKeeping
                  > 32644
                  > 120610 14:55:56 ! Program Starting
                  > 120610 14:55:56 ! BPQMailChat Starting
                  > 120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  > 120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                  >
                  > I am not sure where to go from here.
                  >
                  > Stephen
                  >
                  > --- In BPQ32@yahoogroups.com
                  <mailto:BPQ32%40yahoogroups.com> , "John
                  > Wiseman" <john.wiseman@> wrote:
                  > >
                  > > Stephen,
                  > >
                  > >
                  > >
                  > > You should probably comment out or change the FloodCalls, DigiCalls,
                  and
                  > > OBJECT statements.
                  > >
                  > >
                  > >
                  > > Usually the ISHOST is an APRS-IS server, but if the server you are
                  running
                  > > locally emulates an IS server, that should be ok. Do you get any
                  error
                  > > message on the console screen when you load bpa32?
                  > >
                  > >
                  > >
                  > > The APRS page templates should be directly in folder BPQAPRS/HTML -
                  not a
                  > > subfolder, under your BPQ32 config folder.
                  > >
                  > >
                  > >
                  > > 73,
                  > >
                  > > John
                  > >
                  > >
                  > >
                  > > From: BPQ32@yahoogroups.com
                  <mailto:BPQ32%40yahoogroups.com>
                  > [mailto:BPQ32@yahoogroups.com
                  <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                  > Of
                  > > STEPHEN
                  > > Sent: 10 June 2012 15:52
                  > > To: BPQ32@yahoogroups.com
                  <mailto:BPQ32%40yahoogroups.com>
                  > > Subject: [BPQ32] Problem with APRS and Web Pages
                  > >
                  > >
                  > >
                  > >
                  > >
                  > > I did the last install all worked fine with the install. I added the
                  html
                  > > and aprs web pages. But the aprs seems to be not working.
                  > >
                  > > I added the following from example to the script:
                  > >
                  > > APRSDIGI
                  > >
                  > > APRSCall VE1MPF-10
                  > > StatusMsg=BPQ32 IGate
                  Moncton , New Brunswick , Canada
                  > >
                  > > Symbol=a ; Icon to display for station.
                  > > Symset=B ; This is a "B" in a Red Diamond.
                  > >
                  > > ;
                  > > ; Specify a Dest Addreess and Path for each port you want to use for
                  APRS.
                  > > No dest means receive only port
                  > > ; Ports without an APRSPath statement will not be used by the Digi
                  > > ;
                  > > ; Note if you specify APRS as the destination call it will be
                  replaced by
                  > > the current BPQ32 APRS
                  > > ; identification destination - APBPQ1. If you really want to send
                  APRS,
                  > > specify APRS-0.
                  > >
                  > > APRSPath 1= ; Receive only port
                  > > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
                  > > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
                  > >
                  > > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
                  > > MobileBeaconInterval=2 ; Beacon interval when moving
                  > >
                  > > ; Define Crossport Digi. For each port, a list of ports to send a
                  packet
                  > to
                  > > (IS means send to APRS-IS)
                  > > ; If a Digimap isn't specified for a port, digi out on the port the
                  packet
                  > > arrived on,
                  > > ; and send to APRS-IS (if enabled)
                  > > ; If you want to digi on same port, but not send to APRS-IS, Specify
                  > Digimap
                  > > n=n
                  > > ; If you dont want to digi on a port, specify Digimap n=
                  > > ;
                  > > ; If you only have one APRS port, you probably don't need a Digimap
                  > > statement
                  > >
                  > > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
                  > > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
                  > > ;Digimap 9= ; Don't digi packets received on port 9
                  > >
                  > > ; Define Digipeating parameters
                  > >
                  > > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
                  > > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
                  > > DigiCalls=SKIG ; Calls for Normal
                  (ie no SSID manipulation) Digi
                  > > ; For a Local "Fillin" Digi, you could include WIDE1-1 and
                  leave out
                  > > TraceCalls and FloodCalls
                  > >
                  > > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want
                  the
                  > > call to be left as it is received.
                  > >
                  > > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is
                  > > received with n greater than
                  > > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is
                  > decremented.
                  > >
                  > > ; Specify position. You can specify a fixed LAT/LONG, or use GPS
                  > >
                  > > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
                  > > LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)
                  > >
                  > > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
                  > > GPSSpeed=0 ; overriding the values set above.
                  > >
                  > > ; The Digi can generate Object and Item reports.
                  > >
                  > > ; The format is pretty strict - a single space between param=value
                  pairs,
                  > > ; a comma but no spaces in PATH and PORT string.
                  > >
                  > > ; Minimum interval is 10 mins. You can have as many OBJECT lines as
                  you
                  > > need.
                  > > ; See thr APRS specification for information on how to format an
                  Object or
                  > > Item string.
                  > >
                  > > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
                  > > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
                  > >
                  > > ; IGATE Params. If specified you will gate RF packets and your
                  beacons to
                  > > APRS-IS
                  > >
                  > > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an
                  IPV6
                  > Host
                  > > ISPort=10152 ; Normal port for a
                  filtered feed
                  > > ISPasscode=17580 ; If you don't already have a passcode I can issue
                  you
                  > one.
                  > > ;
                  > > ; You can specify a filter command to be sent when you log on to
                  APRS-IS.
                  > > Normally you don't
                  > > ; need one. The APRS Mapping Application (BPQAPRS) sets a filter when
                  it
                  > > starts,
                  > > ; and if you aren't running an APRS application, there isn't much
                  point in
                  > > getting info from APRS-IS
                  > > ;
                  > > ISFilter=m/50 ; Filter Command if needed
                  > >
                  > > ***
                  > > ;
                  > >
                  > > The problem is it is not connecting to the aprs server. I have tried
                  sever
                  > > servers and I run the one I am trying to connect to and it is
                  working.
                  > > The second thing is the aprs pages I felt needed to be in a folder
                  'aprs'
                  > > but would not work page not found it appears anything in the root
                  works
                  > but
                  > > not in a folder.
                  > >
                  > > do I have something wrong or am I missing something.
                  > >
                  > > Stephen
                  > >
                  >

                • STEPHEN
                  I did a re-install of the update, and a fresh re-boot. I see the check box and it is working. Thanks
                  Message 8 of 30 , Jun 10, 2012
                    I did a re-install of the update, and a fresh re-boot. I see the check box and it is working.

                    Thanks

                    --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
                    >
                    > Stephen
                    >
                    >
                    >
                    > You should have something like
                    >
                    >
                    >
                    >
                    >
                    >
                    >
                    > If the Igate line isn't there, then something very odd is going on - it
                    > suggests the APRS config was rejected, but it that case there should be
                    > error messages in the console window.
                    >
                    >
                    >
                    > Did you get "APRS Digi/Gateway Enabled" on the console window (after the
                    > "Initialising Port. " messages)?
                    >
                    >
                    >
                    > 73
                    >
                    > John
                    >
                    >
                    >
                    > _____
                    >
                    > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                    > STEPHEN
                    > Sent: 10 June 2012 17:57
                    > To: BPQ32@yahoogroups.com
                    > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                    >
                    >
                    >
                    >
                    >
                    > John
                    > we are getting closer
                    > The aprs pages are working but I still will not connect to the APRS server
                    > You stated "Check that the "Enable Igate" checkbox on the bpq32.dll console
                    > window is checked."
                    >
                    > I don't see a Enable Igate on the bpq32.dll window?
                    >
                    > I also changed the server as Mike stated.
                    >
                    > Thanks
                    >
                    > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "John
                    > Wiseman" <john.wiseman@> wrote:
                    > >
                    > > Stephen,
                    > >
                    > >
                    > >
                    > > http://www.ve9sc.com:84/allrf.html isn't really working. The HTML is
                    > > returned, but the APRS data isn't being placed in the page. This suggests
                    > to
                    > > me that you have the APRS pages in BPQ32/HTML, not BPQ32/BPQAPRS/HTML.
                    > >
                    > >
                    > >
                    > > Check that the "Enable Igate" checkbox on the bpq32.dll console window is
                    > > checked. It should be set by default, but if it gets unset, the code won't
                    > > connect.
                    > >
                    > >
                    > >
                    > > I don't know why MailChat is giving a program error in Socket Data every
                    > 10
                    > > minutes, but this isn't related to the Web Server - it is most likely the
                    > > POP3 server trying to retrieve a message, and being upset by what it gets.
                    > > The LOG_TCP.txt file may give a clue as to what is going on.
                    > >
                    > >
                    > >
                    > > 73,
                    > >
                    > > John
                    > >
                    > >
                    > >
                    > >
                    > >
                    > >
                    > >
                    > >
                    > >
                    > > _____
                    > >
                    > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                    > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                    > Of
                    > > STEPHEN
                    > > Sent: 10 June 2012 16:46
                    > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                    > > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                    > >
                    > >
                    > >
                    > >
                    > >
                    > > John
                    > >
                    > > I am running javAPRSSrvr 3.15b08 that should be fine.
                    > > http://www.ve9sc.com:14501/
                    > >
                    > > I know this works as i looked at Jerry's
                    > > http://w9bbs.no-ip.org:8080/ and it is working.
                    > >
                    > > I comment out FloodCalls, DigiCalls, and OBJECT statementsas you stated.
                    > >
                    > > Restarted BPQ and it still will not connect to the aprs server. I tried
                    > > other servers but they will not work either. I tried:
                    > >
                    > > The Main APRS servers "First" & "Second" etc.
                    > >
                    > > The console screen is fine no errors. It states :
                    > >
                    > > APRS/Digi/Gateway Enabled
                    > >
                    > > I have all the html file in the html folder no subfolders the link
                    > >
                    > > http://www.ve9sc.com:84/Node/Routes.html
                    > >
                    > > try the aprs link it will not work nor will that link "APRS" from any of
                    > the
                    > > node pages.
                    > >
                    > > But http://www.ve9sc.com:84/allrf.html works if appears the link is adding
                    > a
                    > > folder aprs.
                    > > http://www.ve9sc.com:84/aprs/all.html
                    > >
                    > > I looked at the debug log
                    > >
                    > > 120610 00:00:02 ! |Enter HouseKeeping
                    > > 120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 02:07:37 ! Too Many Program Errors - Closing
                    > > 120610 02:07:37 ! Attempting to Restart C:\Program
                    > > Files\BPQ32\BPQMailChat.exe
                    > > 120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to
                    > HouseKeeping
                    > > 78674
                    > > 120610 02:08:46 ! Program Starting
                    > > 120610 02:08:46 ! BPQMailChat Starting
                    > > 120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 06:23:18 ! Too Many Program Errors - Closing
                    > > 120610 06:23:18 ! Attempting to Restart C:\Program
                    > > Files\BPQ32\BPQMailChat.exe
                    > > 120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to
                    > HouseKeeping
                    > > 63324
                    > > 120610 06:24:36 ! Program Starting
                    > > 120610 06:24:36 ! BPQMailChat Starting
                    > > 120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 10:39:05 ! Too Many Program Errors - Closing
                    > > 120610 10:39:05 ! Attempting to Restart C:\Program
                    > > Files\BPQ32\BPQMailChat.exe
                    > > 120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to
                    > HouseKeeping
                    > > 47986
                    > > 120610 10:40:14 ! Program Starting
                    > > 120610 10:40:14 ! BPQMailChat Starting
                    > > 120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 14:54:44 ! Too Many Program Errors - Closing
                    > > 120610 14:54:44 ! Attempting to Restart C:\Program
                    > > Files\BPQ32\BPQMailChat.exe
                    > > 120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to
                    > HouseKeeping
                    > > 32644
                    > > 120610 14:55:56 ! Program Starting
                    > > 120610 14:55:56 ! BPQMailChat Starting
                    > > 120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > > 120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                    > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                    > >
                    > > I am not sure where to go from here.
                    > >
                    > > Stephen
                    > >
                    > > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                    > <mailto:BPQ32%40yahoogroups.com> , "John
                    > > Wiseman" <john.wiseman@> wrote:
                    > > >
                    > > > Stephen,
                    > > >
                    > > >
                    > > >
                    > > > You should probably comment out or change the FloodCalls, DigiCalls, and
                    > > > OBJECT statements.
                    > > >
                    > > >
                    > > >
                    > > > Usually the ISHOST is an APRS-IS server, but if the server you are
                    > running
                    > > > locally emulates an IS server, that should be ok. Do you get any error
                    > > > message on the console screen when you load bpa32?
                    > > >
                    > > >
                    > > >
                    > > > The APRS page templates should be directly in folder BPQAPRS/HTML - not
                    > a
                    > > > subfolder, under your BPQ32 config folder.
                    > > >
                    > > >
                    > > >
                    > > > 73,
                    > > >
                    > > > John
                    > > >
                    > > >
                    > > >
                    > > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                    > <mailto:BPQ32%40yahoogroups.com>
                    > > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                    > <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                    > > Of
                    > > > STEPHEN
                    > > > Sent: 10 June 2012 15:52
                    > > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                    > <mailto:BPQ32%40yahoogroups.com>
                    > > > Subject: [BPQ32] Problem with APRS and Web Pages
                    > > >
                    > > >
                    > > >
                    > > >
                    > > >
                    > > > I did the last install all worked fine with the install. I added the
                    > html
                    > > > and aprs web pages. But the aprs seems to be not working.
                    > > >
                    > > > I added the following from example to the script:
                    > > >
                    > > > APRSDIGI
                    > > >
                    > > > APRSCall VE1MPF-10
                    > > > StatusMsg=BPQ32 IGate Moncton, New Brunswick, Canada
                    > > >
                    > > > Symbol=a ; Icon to display for station.
                    > > > Symset=B ; This is a "B" in a Red Diamond.
                    > > >
                    > > > ;
                    > > > ; Specify a Dest Addreess and Path for each port you want to use for
                    > APRS.
                    > > > No dest means receive only port
                    > > > ; Ports without an APRSPath statement will not be used by the Digi
                    > > > ;
                    > > > ; Note if you specify APRS as the destination call it will be replaced
                    > by
                    > > > the current BPQ32 APRS
                    > > > ; identification destination - APBPQ1. If you really want to send APRS,
                    > > > specify APRS-0.
                    > > >
                    > > > APRSPath 1= ; Receive only port
                    > > > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
                    > > > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
                    > > >
                    > > > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
                    > > > MobileBeaconInterval=2 ; Beacon interval when moving
                    > > >
                    > > > ; Define Crossport Digi. For each port, a list of ports to send a packet
                    > > to
                    > > > (IS means send to APRS-IS)
                    > > > ; If a Digimap isn't specified for a port, digi out on the port the
                    > packet
                    > > > arrived on,
                    > > > ; and send to APRS-IS (if enabled)
                    > > > ; If you want to digi on same port, but not send to APRS-IS, Specify
                    > > Digimap
                    > > > n=n
                    > > > ; If you dont want to digi on a port, specify Digimap n=
                    > > > ;
                    > > > ; If you only have one APRS port, you probably don't need a Digimap
                    > > > statement
                    > > >
                    > > > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
                    > > > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
                    > > > ;Digimap 9= ; Don't digi packets received on port 9
                    > > >
                    > > > ; Define Digipeating parameters
                    > > >
                    > > > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
                    > > > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
                    > > > DigiCalls=SKIG ; Calls for Normal (ie no SSID manipulation) Digi
                    > > > ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave out
                    > > > TraceCalls and FloodCalls
                    > > >
                    > > > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the
                    > > > call to be left as it is received.
                    > > >
                    > > > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is
                    > > > received with n greater than
                    > > > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is
                    > > decremented.
                    > > >
                    > > > ; Specify position. You can specify a fixed LAT/LONG, or use GPS
                    > > >
                    > > > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
                    > > > LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)
                    > > >
                    > > > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
                    > > > GPSSpeed=0 ; overriding the values set above.
                    > > >
                    > > > ; The Digi can generate Object and Item reports.
                    > > >
                    > > > ; The format is pretty strict - a single space between param=value
                    > pairs,
                    > > > ; a comma but no spaces in PATH and PORT string.
                    > > >
                    > > > ; Minimum interval is 10 mins. You can have as many OBJECT lines as you
                    > > > need.
                    > > > ; See thr APRS specification for information on how to format an Object
                    > or
                    > > > Item string.
                    > > >
                    > > > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
                    > > > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
                    > > >
                    > > > ; IGATE Params. If specified you will gate RF packets and your beacons
                    > to
                    > > > APRS-IS
                    > > >
                    > > > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an IPV6
                    > > Host
                    > > > ISPort=10152 ; Normal port for a filtered feed
                    > > > ISPasscode=17580 ; If you don't already have a passcode I can issue you
                    > > one.
                    > > > ;
                    > > > ; You can specify a filter command to be sent when you log on to
                    > APRS-IS.
                    > > > Normally you don't
                    > > > ; need one. The APRS Mapping Application (BPQAPRS) sets a filter when it
                    > > > starts,
                    > > > ; and if you aren't running an APRS application, there isn't much point
                    > in
                    > > > getting info from APRS-IS
                    > > > ;
                    > > > ISFilter=m/50 ; Filter Command if needed
                    > > >
                    > > > ***
                    > > > ;
                    > > >
                    > > > The problem is it is not connecting to the aprs server. I have tried
                    > sever
                    > > > servers and I run the one I am trying to connect to and it is working.
                    > > > The second thing is the aprs pages I felt needed to be in a folder
                    > 'aprs'
                    > > > but would not work page not found it appears anything in the root works
                    > > but
                    > > > not in a folder.
                    > > >
                    > > > do I have something wrong or am I missing something.
                    > > >
                    > > > Stephen
                    > > >
                    > >
                    >
                  • STEPHEN
                    John The Node/Nodes.html etc files to edit them where are they located? I can not seem to find them. It seems to be working well now.
                    Message 9 of 30 , Jun 10, 2012
                      John
                      The Node/Nodes.html etc files to edit them where are they located?

                      I can not seem to find them.

                      It seems to be working well now.

                      --- In BPQ32@yahoogroups.com, "STEPHEN" <ve1mpf@...> wrote:
                      >
                      > I did a re-install of the update, and a fresh re-boot. I see the check box and it is working.
                      >
                      > Thanks
                      >
                      > --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@> wrote:
                      > >
                      > > Stephen
                      > >
                      > >
                      > >
                      > > You should have something like
                      > >
                      > >
                      > >
                      > >
                      > >
                      > >
                      > >
                      > > If the Igate line isn't there, then something very odd is going on - it
                      > > suggests the APRS config was rejected, but it that case there should be
                      > > error messages in the console window.
                      > >
                      > >
                      > >
                      > > Did you get "APRS Digi/Gateway Enabled" on the console window (after the
                      > > "Initialising Port. " messages)?
                      > >
                      > >
                      > >
                      > > 73
                      > >
                      > > John
                      > >
                      > >
                      > >
                      > > _____
                      > >
                      > > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                      > > STEPHEN
                      > > Sent: 10 June 2012 17:57
                      > > To: BPQ32@yahoogroups.com
                      > > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                      > >
                      > >
                      > >
                      > >
                      > >
                      > > John
                      > > we are getting closer
                      > > The aprs pages are working but I still will not connect to the APRS server
                      > > You stated "Check that the "Enable Igate" checkbox on the bpq32.dll console
                      > > window is checked."
                      > >
                      > > I don't see a Enable Igate on the bpq32.dll window?
                      > >
                      > > I also changed the server as Mike stated.
                      > >
                      > > Thanks
                      > >
                      > > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "John
                      > > Wiseman" <john.wiseman@> wrote:
                      > > >
                      > > > Stephen,
                      > > >
                      > > >
                      > > >
                      > > > http://www.ve9sc.com:84/allrf.html isn't really working. The HTML is
                      > > > returned, but the APRS data isn't being placed in the page. This suggests
                      > > to
                      > > > me that you have the APRS pages in BPQ32/HTML, not BPQ32/BPQAPRS/HTML.
                      > > >
                      > > >
                      > > >
                      > > > Check that the "Enable Igate" checkbox on the bpq32.dll console window is
                      > > > checked. It should be set by default, but if it gets unset, the code won't
                      > > > connect.
                      > > >
                      > > >
                      > > >
                      > > > I don't know why MailChat is giving a program error in Socket Data every
                      > > 10
                      > > > minutes, but this isn't related to the Web Server - it is most likely the
                      > > > POP3 server trying to retrieve a message, and being upset by what it gets.
                      > > > The LOG_TCP.txt file may give a clue as to what is going on.
                      > > >
                      > > >
                      > > >
                      > > > 73,
                      > > >
                      > > > John
                      > > >
                      > > >
                      > > >
                      > > >
                      > > >
                      > > >
                      > > >
                      > > >
                      > > >
                      > > > _____
                      > > >
                      > > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                      > > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                      > > Of
                      > > > STEPHEN
                      > > > Sent: 10 June 2012 16:46
                      > > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                      > > > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                      > > >
                      > > >
                      > > >
                      > > >
                      > > >
                      > > > John
                      > > >
                      > > > I am running javAPRSSrvr 3.15b08 that should be fine.
                      > > > http://www.ve9sc.com:14501/
                      > > >
                      > > > I know this works as i looked at Jerry's
                      > > > http://w9bbs.no-ip.org:8080/ and it is working.
                      > > >
                      > > > I comment out FloodCalls, DigiCalls, and OBJECT statementsas you stated.
                      > > >
                      > > > Restarted BPQ and it still will not connect to the aprs server. I tried
                      > > > other servers but they will not work either. I tried:
                      > > >
                      > > > The Main APRS servers "First" & "Second" etc.
                      > > >
                      > > > The console screen is fine no errors. It states :
                      > > >
                      > > > APRS/Digi/Gateway Enabled
                      > > >
                      > > > I have all the html file in the html folder no subfolders the link
                      > > >
                      > > > http://www.ve9sc.com:84/Node/Routes.html
                      > > >
                      > > > try the aprs link it will not work nor will that link "APRS" from any of
                      > > the
                      > > > node pages.
                      > > >
                      > > > But http://www.ve9sc.com:84/allrf.html works if appears the link is adding
                      > > a
                      > > > folder aprs.
                      > > > http://www.ve9sc.com:84/aprs/all.html
                      > > >
                      > > > I looked at the debug log
                      > > >
                      > > > 120610 00:00:02 ! |Enter HouseKeeping
                      > > > 120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 02:07:37 ! Too Many Program Errors - Closing
                      > > > 120610 02:07:37 ! Attempting to Restart C:\Program
                      > > > Files\BPQ32\BPQMailChat.exe
                      > > > 120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to
                      > > HouseKeeping
                      > > > 78674
                      > > > 120610 02:08:46 ! Program Starting
                      > > > 120610 02:08:46 ! BPQMailChat Starting
                      > > > 120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 06:23:18 ! Too Many Program Errors - Closing
                      > > > 120610 06:23:18 ! Attempting to Restart C:\Program
                      > > > Files\BPQ32\BPQMailChat.exe
                      > > > 120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to
                      > > HouseKeeping
                      > > > 63324
                      > > > 120610 06:24:36 ! Program Starting
                      > > > 120610 06:24:36 ! BPQMailChat Starting
                      > > > 120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 10:39:05 ! Too Many Program Errors - Closing
                      > > > 120610 10:39:05 ! Attempting to Restart C:\Program
                      > > > Files\BPQ32\BPQMailChat.exe
                      > > > 120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to
                      > > HouseKeeping
                      > > > 47986
                      > > > 120610 10:40:14 ! Program Starting
                      > > > 120610 10:40:14 ! BPQMailChat Starting
                      > > > 120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 14:54:44 ! Too Many Program Errors - Closing
                      > > > 120610 14:54:44 ! Attempting to Restart C:\Program
                      > > > Files\BPQ32\BPQMailChat.exe
                      > > > 120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to
                      > > HouseKeeping
                      > > > 32644
                      > > > 120610 14:55:56 ! Program Starting
                      > > > 120610 14:55:56 ! BPQMailChat Starting
                      > > > 120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > > 120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                      > > >
                      > > > I am not sure where to go from here.
                      > > >
                      > > > Stephen
                      > > >
                      > > > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                      > > <mailto:BPQ32%40yahoogroups.com> , "John
                      > > > Wiseman" <john.wiseman@> wrote:
                      > > > >
                      > > > > Stephen,
                      > > > >
                      > > > >
                      > > > >
                      > > > > You should probably comment out or change the FloodCalls, DigiCalls, and
                      > > > > OBJECT statements.
                      > > > >
                      > > > >
                      > > > >
                      > > > > Usually the ISHOST is an APRS-IS server, but if the server you are
                      > > running
                      > > > > locally emulates an IS server, that should be ok. Do you get any error
                      > > > > message on the console screen when you load bpa32?
                      > > > >
                      > > > >
                      > > > >
                      > > > > The APRS page templates should be directly in folder BPQAPRS/HTML - not
                      > > a
                      > > > > subfolder, under your BPQ32 config folder.
                      > > > >
                      > > > >
                      > > > >
                      > > > > 73,
                      > > > >
                      > > > > John
                      > > > >
                      > > > >
                      > > > >
                      > > > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                      > > <mailto:BPQ32%40yahoogroups.com>
                      > > > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                      > > <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                      > > > Of
                      > > > > STEPHEN
                      > > > > Sent: 10 June 2012 15:52
                      > > > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                      > > <mailto:BPQ32%40yahoogroups.com>
                      > > > > Subject: [BPQ32] Problem with APRS and Web Pages
                      > > > >
                      > > > >
                      > > > >
                      > > > >
                      > > > >
                      > > > > I did the last install all worked fine with the install. I added the
                      > > html
                      > > > > and aprs web pages. But the aprs seems to be not working.
                      > > > >
                      > > > > I added the following from example to the script:
                      > > > >
                      > > > > APRSDIGI
                      > > > >
                      > > > > APRSCall VE1MPF-10
                      > > > > StatusMsg=BPQ32 IGate Moncton, New Brunswick, Canada
                      > > > >
                      > > > > Symbol=a ; Icon to display for station.
                      > > > > Symset=B ; This is a "B" in a Red Diamond.
                      > > > >
                      > > > > ;
                      > > > > ; Specify a Dest Addreess and Path for each port you want to use for
                      > > APRS.
                      > > > > No dest means receive only port
                      > > > > ; Ports without an APRSPath statement will not be used by the Digi
                      > > > > ;
                      > > > > ; Note if you specify APRS as the destination call it will be replaced
                      > > by
                      > > > > the current BPQ32 APRS
                      > > > > ; identification destination - APBPQ1. If you really want to send APRS,
                      > > > > specify APRS-0.
                      > > > >
                      > > > > APRSPath 1= ; Receive only port
                      > > > > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
                      > > > > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
                      > > > >
                      > > > > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
                      > > > > MobileBeaconInterval=2 ; Beacon interval when moving
                      > > > >
                      > > > > ; Define Crossport Digi. For each port, a list of ports to send a packet
                      > > > to
                      > > > > (IS means send to APRS-IS)
                      > > > > ; If a Digimap isn't specified for a port, digi out on the port the
                      > > packet
                      > > > > arrived on,
                      > > > > ; and send to APRS-IS (if enabled)
                      > > > > ; If you want to digi on same port, but not send to APRS-IS, Specify
                      > > > Digimap
                      > > > > n=n
                      > > > > ; If you dont want to digi on a port, specify Digimap n=
                      > > > > ;
                      > > > > ; If you only have one APRS port, you probably don't need a Digimap
                      > > > > statement
                      > > > >
                      > > > > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
                      > > > > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
                      > > > > ;Digimap 9= ; Don't digi packets received on port 9
                      > > > >
                      > > > > ; Define Digipeating parameters
                      > > > >
                      > > > > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
                      > > > > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
                      > > > > DigiCalls=SKIG ; Calls for Normal (ie no SSID manipulation) Digi
                      > > > > ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave out
                      > > > > TraceCalls and FloodCalls
                      > > > >
                      > > > > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the
                      > > > > call to be left as it is received.
                      > > > >
                      > > > > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is
                      > > > > received with n greater than
                      > > > > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is
                      > > > decremented.
                      > > > >
                      > > > > ; Specify position. You can specify a fixed LAT/LONG, or use GPS
                      > > > >
                      > > > > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
                      > > > > LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)
                      > > > >
                      > > > > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
                      > > > > GPSSpeed=0 ; overriding the values set above.
                      > > > >
                      > > > > ; The Digi can generate Object and Item reports.
                      > > > >
                      > > > > ; The format is pretty strict - a single space between param=value
                      > > pairs,
                      > > > > ; a comma but no spaces in PATH and PORT string.
                      > > > >
                      > > > > ; Minimum interval is 10 mins. You can have as many OBJECT lines as you
                      > > > > need.
                      > > > > ; See thr APRS specification for information on how to format an Object
                      > > or
                      > > > > Item string.
                      > > > >
                      > > > > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
                      > > > > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
                      > > > >
                      > > > > ; IGATE Params. If specified you will gate RF packets and your beacons
                      > > to
                      > > > > APRS-IS
                      > > > >
                      > > > > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an IPV6
                      > > > Host
                      > > > > ISPort=10152 ; Normal port for a filtered feed
                      > > > > ISPasscode=17580 ; If you don't already have a passcode I can issue you
                      > > > one.
                      > > > > ;
                      > > > > ; You can specify a filter command to be sent when you log on to
                      > > APRS-IS.
                      > > > > Normally you don't
                      > > > > ; need one. The APRS Mapping Application (BPQAPRS) sets a filter when it
                      > > > > starts,
                      > > > > ; and if you aren't running an APRS application, there isn't much point
                      > > in
                      > > > > getting info from APRS-IS
                      > > > > ;
                      > > > > ISFilter=m/50 ; Filter Command if needed
                      > > > >
                      > > > > ***
                      > > > > ;
                      > > > >
                      > > > > The problem is it is not connecting to the aprs server. I have tried
                      > > sever
                      > > > > servers and I run the one I am trying to connect to and it is working.
                      > > > > The second thing is the aprs pages I felt needed to be in a folder
                      > > 'aprs'
                      > > > > but would not work page not found it appears anything in the root works
                      > > > but
                      > > > > not in a folder.
                      > > > >
                      > > > > do I have something wrong or am I missing something.
                      > > > >
                      > > > > Stephen
                      > > > >
                      > > >
                      > >
                      >
                    • John Wiseman
                      The Node display pages are coded in the software. You can t change them, except to add a background image. Only the index files - index.html, indexnoaprs.html
                      Message 10 of 30 , Jun 10, 2012

                        The Node display pages are coded in the software. You can’t change them, except to add a background image.

                         

                        Only the index files – index.html, indexnoaprs.html and nodemenu.html can be changed.

                         

                        John

                         


                        From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of STEPHEN
                        Sent: 10 June 2012 19:54
                        To: BPQ32@yahoogroups.com
                        Subject: [BPQ32] Re: Problem with APRS and Web Pages

                         

                         


                        John
                        The Node/Nodes.html etc files to edit them where are they located?

                        I can not seem to find them.

                        It seems to be working well now.

                        --- In BPQ32@yahoogroups.com, "STEPHEN" <ve1mpf@...> wrote:

                        >
                        > I did a re-install of the update, and a fresh re-boot. I see the check box
                        and it is working.
                        >
                        > Thanks
                        >
                        > --- In BPQ32@yahoogroups.com,
                        "John Wiseman" <john.wiseman@> wrote:
                        > >
                        > > Stephen
                        > >
                        > >
                        > >
                        > > You should have something like
                        > >
                        > >
                        > >
                        > >
                        > >
                        > >
                        > >
                        > > If the Igate line isn't there, then something very odd is going on -
                        it
                        > > suggests the APRS config was rejected, but it that case there should
                        be
                        > > error messages in the console window.
                        > >
                        > >
                        > >
                        > > Did you get "APRS Digi/Gateway Enabled" on the console
                        window (after the
                        > > "Initialising Port. " messages)?
                        > >
                        > >
                        > >
                        > > 73
                        > >
                        > > John
                        > >
                        > >
                        > >
                        > > _____
                        > >
                        > > From: BPQ32@yahoogroups.com
                        [mailto:BPQ32@yahoogroups.com] On Behalf Of
                        > > STEPHEN
                        > > Sent: 10 June 2012 17:57
                        > > To: BPQ32@yahoogroups.com
                        > > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                        > >
                        > >
                        > >
                        > >
                        > >
                        > > John
                        > > we are getting closer
                        > > The aprs pages are working but I still will not connect to the APRS
                        server
                        > > You stated "Check that the "Enable Igate" checkbox on
                        the bpq32.dll console
                        > > window is checked."
                        > >
                        > > I don't see a Enable Igate on the bpq32.dll window?
                        > >
                        > > I also changed the server as Mike stated.
                        > >
                        > > Thanks
                        > >
                        > > --- In BPQ32@yahoogroups.com
                        <mailto:BPQ32%40yahoogroups.com> , "John
                        > > Wiseman" <john.wiseman@> wrote:
                        > > >
                        > > > Stephen,
                        > > >
                        > > >
                        > > >
                        > > > http://www.ve9sc.com:84/allrf.html
                        isn't really working. The HTML is
                        > > > returned, but the APRS data isn't being placed in the page. This
                        suggests
                        > > to
                        > > > me that you have the APRS pages in BPQ32/HTML, not
                        BPQ32/BPQAPRS/HTML.
                        > > >
                        > > >
                        > > >
                        > > > Check that the "Enable Igate" checkbox on the
                        bpq32.dll console window is
                        > > > checked. It should be set by default, but if it gets unset, the
                        code won't
                        > > > connect.
                        > > >
                        > > >
                        > > >
                        > > > I don't know why MailChat is giving a program error in Socket
                        Data every
                        > > 10
                        > > > minutes, but this isn't related to the Web Server - it is most
                        likely the
                        > > > POP3 server trying to retrieve a message, and being upset by
                        what it gets.
                        > > > The LOG_TCP.txt file may give a clue as to what is going on.
                        > > >
                        > > >
                        > > >
                        > > > 73,
                        > > >
                        > > > John
                        > > >
                        > > >
                        > > >
                        > > >
                        > > >
                        > > >
                        > > >
                        > > >
                        > > >
                        > > > _____
                        > > >
                        > > > From: BPQ32@yahoogroups.com
                        <mailto:BPQ32%40yahoogroups.com>
                        > > [mailto:BPQ32@yahoogroups.com
                        <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                        > > Of
                        > > > STEPHEN
                        > > > Sent: 10 June 2012 16:46
                        > > > To: BPQ32@yahoogroups.com
                        <mailto:BPQ32%40yahoogroups.com>
                        > > > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                        > > >
                        > > >
                        > > >
                        > > >
                        > > >
                        > > > John
                        > > >
                        > > > I am running javAPRSSrvr 3.15b08 that should be fine.
                        > > > http://www.ve9sc.com:14501/
                        > > >
                        > > > I know this works as i looked at Jerry's
                        > > > http://w9bbs.no-ip.org:8080/
                        and it is working.
                        > > >
                        > > > I comment out FloodCalls, DigiCalls, and OBJECT statementsas you
                        stated.
                        > > >
                        > > > Restarted BPQ and it still will not connect to the aprs server.
                        I tried
                        > > > other servers but they will not work either. I tried:
                        > > >
                        > > > The Main APRS servers "First" & "Second"
                        etc.
                        > > >
                        > > > The console screen is fine no errors. It states :
                        > > >
                        > > > APRS/Digi/Gateway Enabled
                        > > >
                        > > > I have all the html file in the html folder no subfolders the
                        link
                        > > >
                        > > > http://www.ve9sc.com:84/Node/Routes.html
                        > > >
                        > > > try the aprs link it will not work nor will that link
                        "APRS" from any of
                        > > the
                        > > > node pages.
                        > > >
                        > > > But http://www.ve9sc.com:84/allrf.html
                        works if appears the link is adding
                        > > a
                        > > > folder aprs.
                        > > > http://www.ve9sc.com:84/aprs/all.html
                        > > >
                        > > > I looked at the debug log
                        > > >
                        > > > 120610 00:00:02 ! |Enter HouseKeeping
                        > > > 120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 02:07:37 ! Too Many Program Errors - Closing
                        > > > 120610 02:07:37 ! Attempting to Restart C:\Program
                        > > > Files\BPQ32\BPQMailChat.exe
                        > > > 120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to
                        > > HouseKeeping
                        > > > 78674
                        > > > 120610 02:08:46 ! Program Starting
                        > > > 120610 02:08:46 ! BPQMailChat Starting
                        > > > 120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 06:23:18 ! Too Many Program Errors - Closing
                        > > > 120610 06:23:18 ! Attempting to Restart C:\Program
                        > > > Files\BPQ32\BPQMailChat.exe
                        > > > 120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to
                        > > HouseKeeping
                        > > > 63324
                        > > > 120610 06:24:36 ! Program Starting
                        > > > 120610 06:24:36 ! BPQMailChat Starting
                        > > > 120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 10:39:05 ! Too Many Program Errors - Closing
                        > > > 120610 10:39:05 ! Attempting to Restart C:\Program
                        > > > Files\BPQ32\BPQMailChat.exe
                        > > > 120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to
                        > > HouseKeeping
                        > > > 47986
                        > > > 120610 10:40:14 ! Program Starting
                        > > > 120610 10:40:14 ! BPQMailChat Starting
                        > > > 120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 14:54:44 ! Too Many Program Errors - Closing
                        > > > 120610 14:54:44 ! Attempting to Restart C:\Program
                        > > > Files\BPQ32\BPQMailChat.exe
                        > > > 120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to
                        > > HouseKeeping
                        > > > 32644
                        > > > 120610 14:55:56 ! Program Starting
                        > > > 120610 14:55:56 ! BPQMailChat Starting
                        > > > 120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > > 120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445
                        in
                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                        > > >
                        > > > I am not sure where to go from here.
                        > > >
                        > > > Stephen
                        > > >
                        > > > --- In BPQ32@yahoogroups.com
                        <mailto:BPQ32%40yahoogroups.com>
                        > > <mailto:BPQ32%40yahoogroups.com> , "John
                        > > > Wiseman" <john.wiseman@> wrote:
                        > > > >
                        > > > > Stephen,
                        > > > >
                        > > > >
                        > > > >
                        > > > > You should probably comment out or change the FloodCalls,
                        DigiCalls, and
                        > > > > OBJECT statements.
                        > > > >
                        > > > >
                        > > > >
                        > > > > Usually the ISHOST is an APRS-IS server, but if the server
                        you are
                        > > running
                        > > > > locally emulates an IS server, that should be ok. Do you
                        get any error
                        > > > > message on the console screen when you load bpa32?
                        > > > >
                        > > > >
                        > > > >
                        > > > > The APRS page templates should be directly in folder
                        BPQAPRS/HTML - not
                        > > a
                        > > > > subfolder, under your BPQ32 config folder.
                        > > > >
                        > > > >
                        > > > >
                        > > > > 73,
                        > > > >
                        > > > > John
                        > > > >
                        > > > >
                        > > > >
                        > > > > From: BPQ32@yahoogroups.com
                        <mailto:BPQ32%40yahoogroups.com>
                        > > <mailto:BPQ32%40yahoogroups.com>
                        > > > [mailto:BPQ32@yahoogroups.com
                        <mailto:BPQ32%40yahoogroups.com>
                        > > <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                        > > > Of
                        > > > > STEPHEN
                        > > > > Sent: 10 June 2012 15:52
                        > > > > To: BPQ32@yahoogroups.com
                        <mailto:BPQ32%40yahoogroups.com>
                        > > <mailto:BPQ32%40yahoogroups.com>
                        > > > > Subject: [BPQ32] Problem with APRS and Web Pages
                        > > > >
                        > > > >
                        > > > >
                        > > > >
                        > > > >
                        > > > > I did the last install all worked fine with the install. I
                        added the
                        > > html
                        > > > > and aprs web pages. But the aprs seems to be not working.
                        > > > >
                        > > > > I added the following from example to the script:
                        > > > >
                        > > > > APRSDIGI
                        > > > >
                        > > > > APRSCall VE1MPF-10
                        > > > > StatusMsg=BPQ32 IGate
                        Moncton , New Brunswick , Canada
                        > > > >
                        > > > > Symbol=a ; Icon to display for station.
                        > > > > Symset=B ; This is a "B" in a Red Diamond.
                        > > > >
                        > > > > ;
                        > > > > ; Specify a Dest Addreess and Path for each port you want
                        to use for
                        > > APRS.
                        > > > > No dest means receive only port
                        > > > > ; Ports without an APRSPath statement will not be used by
                        the Digi
                        > > > > ;
                        > > > > ; Note if you specify APRS as the destination call it will
                        be replaced
                        > > by
                        > > > > the current BPQ32 APRS
                        > > > > ; identification destination - APBPQ1. If you really want
                        to send APRS,
                        > > > > specify APRS-0.
                        > > > >
                        > > > > APRSPath 1= ; Receive only port
                        > > > > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
                        > > > > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
                        > > > >
                        > > > > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is
                        5 mins
                        > > > > MobileBeaconInterval=2 ; Beacon interval when moving
                        > > > >
                        > > > > ; Define Crossport Digi. For each port, a list of ports to
                        send a packet
                        > > > to
                        > > > > (IS means send to APRS-IS)
                        > > > > ; If a Digimap isn't specified for a port, digi out on the
                        port the
                        > > packet
                        > > > > arrived on,
                        > > > > ; and send to APRS-IS (if enabled)
                        > > > > ; If you want to digi on same port, but not send to
                        APRS-IS, Specify
                        > > > Digimap
                        > > > > n=n
                        > > > > ; If you dont want to digi on a port, specify Digimap n=
                        > > > > ;
                        > > > > ; If you only have one APRS port, you probably don't need a
                        Digimap
                        > > > > statement
                        > > > >
                        > > > > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
                        > > > > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
                        > > > > ;Digimap 9= ; Don't digi packets received on port 9
                        > > > >
                        > > > > ; Define Digipeating parameters
                        > > > >
                        > > > > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with
                        Trace
                        > > > > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
                        > > > > DigiCalls=SKIG ; Calls for
                        w:st="on">Normal (ie no SSID manipulation) Digi
                        > > > > ; For a Local "Fillin" Digi, you could include
                        WIDE1-1 and leave out
                        > > > > TraceCalls and FloodCalls
                        > > > >
                        > > > > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if
                        you want the
                        > > > > call to be left as it is received.
                        > > > >
                        > > > > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a
                        packet is
                        > > > > received with n greater than
                        > > > > MaxFloodHops=2 ; this, the value will be replaced BEFORE it
                        is
                        > > > decremented.
                        > > > >
                        > > > > ; Specify position. You can specify a fixed LAT/LONG, or
                        use GPS
                        > > > >
                        > > > > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
                        > > > > LON=06451.33W ; Must be in standard APRS Format
                        (dddmm.mmE/W)
                        > > > >
                        > > > > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
                        > > > > GPSSpeed=0 ; overriding the values set above.
                        > > > >
                        > > > > ; The Digi can generate Object and Item reports.
                        > > > >
                        > > > > ; The format is pretty strict - a single space between
                        param=value
                        > > pairs,
                        > > > > ; a comma but no spaces in PATH and PORT string.
                        > > > >
                        > > > > ; Minimum interval is 10 mins. You can have as many OBJECT
                        lines as you
                        > > > > need.
                        > > > > ; See thr APRS specification for information on how to
                        format an Object
                        > > or
                        > > > > Item string.
                        > > > >
                        > > > > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
                        > > > > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
                        > > > >
                        > > > > ; IGATE Params. If specified you will gate RF packets and
                        your beacons
                        > > to
                        > > > > APRS-IS
                        > > > >
                        > > > > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4
                        or an IPV6
                        > > > Host
                        > > > > ISPort=10152 ; Normal port
                        for a filtered feed
                        > > > > ISPasscode=17580 ; If you don't already have a passcode I
                        can issue you
                        > > > one.
                        > > > > ;
                        > > > > ; You can specify a filter command to be sent when you log
                        on to
                        > > APRS-IS.
                        > > > > Normally you don't
                        > > > > ; need one. The APRS Mapping Application (BPQAPRS) sets a
                        filter when it
                        > > > > starts,
                        > > > > ; and if you aren't running an APRS application, there
                        isn't much point
                        > > in
                        > > > > getting info from APRS-IS
                        > > > > ;
                        > > > > ISFilter=m/50 ; Filter Command if needed
                        > > > >
                        > > > > ***
                        > > > > ;
                        > > > >
                        > > > > The problem is it is not connecting to the aprs server. I
                        have tried
                        > > sever
                        > > > > servers and I run the one I am trying to connect to and it
                        is working.
                        > > > > The second thing is the aprs pages I felt needed to be in a
                        folder
                        > > 'aprs'
                        > > > > but would not work page not found it appears anything in
                        the root works
                        > > > but
                        > > > > not in a folder.
                        > > > >
                        > > > > do I have something wrong or am I missing something.
                        > > > >
                        > > > > Stephen
                        > > > >
                        > > >
                        > >
                        >

                      • ken
                        Hi John I have my web server pages working. http://gb7cow.dyndns.org:5080 only think it does not do for some reason is look up the station ie:
                        Message 11 of 30 , Jun 10, 2012

                          Hi John
                          I have my web server pages working.
                          http://gb7cow.dyndns.org:5080
                          only think it does not do for some reason is look up the station
                          ie: http://gb7cow.dyndns.org:5080/aprs/find.cgi?call=EI7IG
                          all i am getting from Gerhards (F5VAG) server is a javascript error:  input is not valid
                          I have the latest Java installed and the latest code from Gerhards Aprs website

                          is it something i may have overlooked??
                          apart from the above all is working well.

                          73 de Ken
                          g7vja
                          gb7cow-3



                          On 10/06/12 20:01, John Wiseman wrote:
                           

                          The Node display pages are coded in the software. You can’t change them, except to add a background image.

                           

                          Only the index files – index.html, indexnoaprs.html and nodemenu.html can be changed.

                           

                          John

                           


                          From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com ] On Behalf Of STEPHEN
                          Sent: 10 June 2012 19:54
                          To: BPQ32@yahoogroups.com
                          Subject: [BPQ32] Re: Problem with APRS and Web Pages

                           

                           


                          John
                          The Node/Nodes.html etc files to edit them where are they located?

                          I can not seem to find them.

                          It seems to be working well now.

                          --- In BPQ32@yahoogroups.com, "STEPHEN" <ve1mpf@...> wrote:
                          >
                          > I did a re-install of the update, and a fresh re-boot. I see the check box and it is working.
                          >
                          > Thanks
                          >
                          > --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@> wrote:
                          > >
                          > > Stephen
                          > >
                          > >
                          > >
                          > > You should have something like
                          > >
                          > >
                          > >
                          > >
                          > >
                          > >
                          > >
                          > > If the Igate line isn't there, then something very odd is going on - it
                          > > suggests the APRS config was rejected, but it that case there should be
                          > > error messages in the console window.
                          > >
                          > >
                          > >
                          > > Did you get "APRS Digi/Gateway Enabled" on the console window (after the
                          > > "Initialising Port. " messages)?
                          > >
                          > >
                          > >
                          > > 73
                          > >
                          > > John
                          > >
                          > >
                          > >
                          > > _____
                          > >
                          > > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                          > > STEPHEN
                          > > Sent: 10 June 2012 17:57
                          > > To: BPQ32@yahoogroups.com
                          > > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                          > >
                          > >
                          > >
                          > >
                          > >
                          > > John
                          > > we are getting closer
                          > > The aprs pages are working but I still will not connect to the APRS server
                          > > You stated "Check that the "Enable Igate" checkbox on the bpq32.dll console
                          > > window is checked."
                          > >
                          > > I don't see a Enable Igate on the bpq32.dll window?
                          > >
                          > > I also changed the server as Mike stated.
                          > >
                          > > Thanks
                          > >
                          > > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "John
                          > > Wiseman" <john.wiseman@> wrote:
                          > > >
                          > > > Stephen,
                          > > >
                          > > >
                          > > >
                          > > > http://www.ve9sc.com:84/allrf.html isn't really working. The HTML is
                          > > > returned, but the APRS data isn't being placed in the page. This suggests
                          > > to
                          > > > me that you have the APRS pages in BPQ32/HTML, not BPQ32/BPQAPRS/HTML.
                          > > >
                          > > >
                          > > >
                          > > > Check that the "Enable Igate" checkbox on the bpq32.dll console window is
                          > > > checked. It should be set by default, but if it gets unset, the code won't
                          > > > connect.
                          > > >
                          > > >
                          > > >
                          > > > I don't know why MailChat is giving a program error in Socket Data every
                          > > 10
                          > > > minutes, but this isn't related to the Web Server - it is most likely the
                          > > > POP3 server trying to retrieve a message, and being upset by what it gets.
                          > > > The LOG_TCP.txt file may give a clue as to what is going on.
                          > > >
                          > > >
                          > > >
                          > > > 73,
                          > > >
                          > > > John
                          > > >
                          > > >
                          > > >
                          > > >
                          > > >
                          > > >
                          > > >
                          > > >
                          > > >
                          > > > _____
                          > > >
                          > > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                          > > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                          > > Of
                          > > > STEPHEN
                          > > > Sent: 10 June 2012 16:46
                          > > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                          > > > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                          > > >
                          > > >
                          > > >
                          > > >
                          > > >
                          > > > John
                          > > >
                          > > > I am running javAPRSSrvr 3.15b08 that should be fine.
                          > > > http://www.ve9sc.com:14501/
                          > > >
                          > > > I know this works as i looked at Jerry's
                          > > > http://w9bbs.no-ip.org:8080/ and it is working.
                          > > >
                          > > > I comment out FloodCalls, DigiCalls, and OBJECT statementsas you stated.
                          > > >
                          > > > Restarted BPQ and it still will not connect to the aprs server. I tried
                          > > > other servers but they will not work either. I tried:
                          > > >
                          > > > The Main APRS servers "First" & "Second" etc.
                          > > >
                          > > > The console screen is fine no errors. It states :
                          > > >
                          > > > APRS/Digi/Gateway Enabled
                          > > >
                          > > > I have all the html file in the html folder no subfolders the link
                          > > >
                          > > > http://www.ve9sc.com:84/Node/Routes.html
                          > > >
                          > > > try the aprs link it will not work nor will that link "APRS" from any of
                          > > the
                          > > > node pages.
                          > > >
                          > > > But http://www.ve9sc.com:84/allrf.html works if appears the link is adding
                          > > a
                          > > > folder aprs.
                          > > > http://www.ve9sc.com:84/aprs/all.html
                          > > >
                          > > > I looked at the debug log
                          > > >
                          > > > 120610 00:00:02 ! |Enter HouseKeeping
                          > > > 120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 02:07:37 ! Too Many Program Errors - Closing
                          > > > 120610 02:07:37 ! Attempting to Restart C:\Program
                          > > > Files\BPQ32\BPQMailChat.exe
                          > > > 120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to
                          > > HouseKeeping
                          > > > 78674
                          > > > 120610 02:08:46 ! Program Starting
                          > > > 120610 02:08:46 ! BPQMailChat Starting
                          > > > 120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 06:23:18 ! Too Many Program Errors - Closing
                          > > > 120610 06:23:18 ! Attempting to Restart C:\Program
                          > > > Files\BPQ32\BPQMailChat.exe
                          > > > 120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to
                          > > HouseKeeping
                          > > > 63324
                          > > > 120610 06:24:36 ! Program Starting
                          > > > 120610 06:24:36 ! BPQMailChat Starting
                          > > > 120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 10:39:05 ! Too Many Program Errors - Closing
                          > > > 120610 10:39:05 ! Attempting to Restart C:\Program
                          > > > Files\BPQ32\BPQMailChat.exe
                          > > > 120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to
                          > > HouseKeeping
                          > > > 47986
                          > > > 120610 10:40:14 ! Program Starting
                          > > > 120610 10:40:14 ! BPQMailChat Starting
                          > > > 120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 14:54:44 ! Too Many Program Errors - Closing
                          > > > 120610 14:54:44 ! Attempting to Restart C:\Program
                          > > > Files\BPQ32\BPQMailChat.exe
                          > > > 120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to
                          > > HouseKeeping
                          > > > 32644
                          > > > 120610 14:55:56 ! Program Starting
                          > > > 120610 14:55:56 ! BPQMailChat Starting
                          > > > 120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > > 120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                          > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                          > > >
                          > > > I am not sure where to go from here.
                          > > >
                          > > > Stephen
                          > > >
                          > > > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                          > > <mailto:BPQ32%40yahoogroups.com> , "John
                          > > > Wiseman" <john.wiseman@> wrote:
                          > > > >
                          > > > > Stephen,
                          > > > >
                          > > > >
                          > > > >
                          > > > > You should probably comment out or change the FloodCalls, DigiCalls, and
                          > > > > OBJECT statements.
                          > > > >
                          > > > >
                          > > > >
                          > > > > Usually the ISHOST is an APRS-IS server, but if the server you are
                          > > running
                          > > > > locally emulates an IS server, that should be ok. Do you get any error
                          > > > > message on the console screen when you load bpa32?
                          > > > >
                          > > > >
                          > > > >
                          > > > > The APRS page templates should be directly in folder BPQAPRS/HTML - not
                          > > a
                          > > > > subfolder, under your BPQ32 config folder.
                          > > > >
                          > > > >
                          > > > >
                          > > > > 73,
                          > > > >
                          > > > > John
                          > > > >
                          > > > >
                          > > > >
                          > > > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                          > > <mailto:BPQ32%40yahoogroups.com>
                          > > > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                          > > <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                          > > > Of
                          > > > > STEPHEN
                          > > > > Sent: 10 June 2012 15:52
                          > > > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                          > > <mailto:BPQ32%40yahoogroups.com>
                          > > > > Subject: [BPQ32] Problem with APRS and Web Pages
                          > > > >
                          > > > >
                          > > > >
                          > > > >
                          > > > >
                          > > > > I did the last install all worked fine with the install. I added the
                          > > html
                          > > > > and aprs web pages. But the aprs seems to be not working.
                          > > > >
                          > > > > I added the following from example to the script:
                          > > > >
                          > > > > APRSDIGI
                          > > > >
                          > > > > APRSCall VE1MPF-10
                          > > > > StatusMsg=BPQ32 IGateMoncton , New Brunswick , Canada
                          > > > >
                          > > > > Symbol=a ; Icon to display for station.
                          > > > > Symset=B ; This is a "B" in a Red Diamond.
                          > > > >
                          > > > > ;
                          > > > > ; Specify a Dest Addreess and Path for each port you want to use for
                          > > APRS.
                          > > > > No dest means receive only port
                          > > > > ; Ports without an APRSPath statement will not be used by the Digi
                          > > > > ;
                          > > > > ; Note if you specify APRS as the destination call it will be replaced
                          > > by
                          > > > > the current BPQ32 APRS
                          > > > > ; identification destination - APBPQ1. If you really want to send APRS,
                          > > > > specify APRS-0.
                          > > > >
                          > > > > APRSPath 1= ; Receive only port
                          > > > > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
                          > > > > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
                          > > > >
                          > > > > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
                          > > > > MobileBeaconInterval=2 ; Beacon interval when moving
                          > > > >
                          > > > > ; Define Crossport Digi. For each port, a list of ports to send a packet
                          > > > to
                          > > > > (IS means send to APRS-IS)
                          > > > > ; If a Digimap isn't specified for a port, digi out on the port the
                          > > packet
                          > > > > arrived on,
                          > > > > ; and send to APRS-IS (if enabled)
                          > > > > ; If you want to digi on same port, but not send to APRS-IS, Specify
                          > > > Digimap
                          > > > > n=n
                          > > > > ; If you dont want to digi on a port, specify Digimap n=
                          > > > > ;
                          > > > > ; If you only have one APRS port, you probably don't need a Digimap
                          > > > > statement
                          > > > >
                          > > > > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
                          > > > > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
                          > > > > ;Digimap 9= ; Don't digi packets received on port 9
                          > > > >
                          > > > > ; Define Digipeating parameters
                          > > > >
                          > > > > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
                          > > > > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
                          > > > > DigiCalls=SKIG ; Calls for Normal (ie no SSID manipulation) Digi
                          > > > > ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave out
                          > > > > TraceCalls and FloodCalls
                          > > > >
                          > > > > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the
                          > > > > call to be left as it is received.
                          > > > >
                          > > > > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is
                          > > > > received with n greater than
                          > > > > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is
                          > > > decremented.
                          > > > >
                          > > > > ; Specify position. You can specify a fixed LAT/LONG, or use GPS
                          > > > >
                          > > > > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
                          > > > > LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)
                          > > > >
                          > > > > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
                          > > > > GPSSpeed=0 ; overriding the values set above.
                          > > > >
                          > > > > ; The Digi can generate Object and Item reports.
                          > > > >
                          > > > > ; The format is pretty strict - a single space between param=value
                          > > pairs,
                          > > > > ; a comma but no spaces in PATH and PORT string.
                          > > > >
                          > > > > ; Minimum interval is 10 mins. You can have as many OBJECT lines as you
                          > > > > need.
                          > > > > ; See thr APRS specification for information on how to format an Object
                          > > or
                          > > > > Item string.
                          > > > >
                          > > > > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
                          > > > > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
                          > > > >
                          > > > > ; IGATE Params. If specified you will gate RF packets and your beacons
                          > > to
                          > > > > APRS-IS
                          > > > >
                          > > > > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an IPV6
                          > > > Host
                          > > > > ISPort=10152 ; Normal port for a filtered feed
                          > > > > ISPasscode=17580 ; If you don't already have a passcode I can issue you
                          > > > one.
                          > > > > ;
                          > > > > ; You can specify a filter command to be sent when you log on to
                          > > APRS-IS.


                          (Message over 64 KB, truncated)

                        • John Wiseman
                          Ken, I suspect you are using the wrong tag for the location. It should be ##LOCDDMMSS##. This isn t the same as UIView. 73, John _____ From:
                          Message 12 of 30 , Jun 10, 2012

                            Ken,

                             

                            I suspect you are using the wrong tag for the location. It should be ##LOCDDMMSS##. This isn’t the same as UIView.

                             

                            73, John


                            From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of ken
                            Sent: 10 June 2012 22:23
                            To: BPQ32@yahoogroups.com
                            Subject: Re: [BPQ32] Re: Problem with APRS and Web Pages

                             

                             


                            Hi John
                            I have my web server pages working.
                            http://gb7cow.dyndns.org:5080
                            only think it does not do for some reason is look up the station
                            ie: http://gb7cow.dyndns.org:5080/aprs/find.cgi?call=EI7IG
                            all i am getting from Gerhards (F5VAG) server is a javascript error:  input is not valid
                            I have the latest Java installed and the latest code from Gerhards Aprs website

                            is it something i may have overlooked??
                            apart from the above all is working well.

                            73 de Ken
                            g7vja
                            gb7cow-3



                            On 10/06/12 20:01, John Wiseman wrote:

                             

                            The Node display pages are coded in the software. You can’t change them, except to add a background image.

                             

                            Only the index files – index.html, indexnoaprs.html and nodemenu.html can be changed.

                             

                            John

                             


                            From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com ] On Behalf Of STEPHEN
                            Sent: 10 June 2012 19:54
                            To: BPQ32@yahoogroups.com
                            Subject: [BPQ32] Re: Problem with APRS and Web Pages

                             

                             


                            John
                            The Node/Nodes.html etc files to edit them where are they located?

                            I can not seem to find them.

                            It seems to be working well now.

                            --- In BPQ32@yahoogroups.com, "STEPHEN" <ve1mpf@...> wrote:
                            >
                            > I did a re-install of the update, and a fresh re-boot. I see the check box and it is working.
                            >
                            > Thanks
                            >
                            > --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@> wrote:
                            > >
                            > > Stephen
                            > >
                            > >
                            > >
                            > > You should have something like
                            > >
                            > >
                            > >
                            > >
                            > >
                            > >
                            > >
                            > > If the Igate line isn't there, then something very odd is going on - it
                            > > suggests the APRS config was rejected, but it that case there should be
                            > > error messages in the console window.
                            > >
                            > >
                            > >
                            > > Did you get "APRS Digi/Gateway Enabled" on the console window (after the
                            > > "Initialising Port. " messages)?
                            > >
                            > >
                            > >
                            > > 73
                            > >
                            > > John
                            > >
                            > >
                            > >
                            > > _____
                            > >
                            > > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                            > > STEPHEN
                            > > Sent: 10 June 2012 17:57
                            > > To: BPQ32@yahoogroups.com
                            > > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                            > >
                            > >
                            > >
                            > >
                            > >
                            > > John
                            > > we are getting closer
                            > > The aprs pages are working but I still will not connect to the APRS server
                            > > You stated "Check that the "Enable Igate" checkbox on the bpq32.dll console
                            > > window is checked."
                            > >
                            > > I don't see a Enable Igate on the bpq32.dll window?
                            > >
                            > > I also changed the server as Mike stated.
                            > >
                            > > Thanks
                            > >
                            > > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "John
                            > > Wiseman" <john.wiseman@> wrote:
                            > > >
                            > > > Stephen,
                            > > >
                            > > >
                            > > >
                            > > > http://www.ve9sc.com:84/allrf.html isn't really working. The HTML is
                            > > > returned, but the APRS data isn't being placed in the page. This suggests
                            > > to
                            > > > me that you have the APRS pages in BPQ32/HTML, not BPQ32/BPQAPRS/HTML.
                            > > >
                            > > >
                            > > >
                            > > > Check that the "Enable Igate" checkbox on the bpq32.dll console window is
                            > > > checked. It should be set by default, but if it gets unset, the code won't
                            > > > connect.
                            > > >
                            > > >
                            > > >
                            > > > I don't know why MailChat is giving a program error in Socket Data every
                            > > 10
                            > > > minutes, but this isn't related to the Web Server - it is most likely the
                            > > > POP3 server trying to retrieve a message, and being upset by what it gets.
                            > > > The LOG_TCP.txt file may give a clue as to what is going on.
                            > > >
                            > > >
                            > > >
                            > > > 73,
                            > > >
                            > > > John
                            > > >
                            > > >
                            > > >
                            > > >
                            > > >
                            > > >
                            > > >
                            > > >
                            > > >
                            > > > _____
                            > > >
                            > > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                            > > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                            > > Of
                            > > > STEPHEN
                            > > > Sent: 10 June 2012 16:46
                            > > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                            > > > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                            > > >
                            > > >
                            > > >
                            > > >
                            > > >
                            > > > John
                            > > >
                            > > > I am running javAPRSSrvr 3.15b08 that should be fine.
                            > > > http://www.ve9sc.com:14501/
                            > > >
                            > > > I know this works as i looked at Jerry's
                            > > > http://w9bbs.no-ip.org:8080/ and it is working.
                            > > >
                            > > > I comment out FloodCalls, DigiCalls, and OBJECT statementsas you stated.
                            > > >
                            > > > Restarted BPQ and it still will not connect to the aprs server. I tried
                            > > > other servers but they will not work either. I tried:
                            > > >
                            > > > The Main APRS servers "First" & "Second" etc.
                            > > >
                            > > > The console screen is fine no errors. It states :
                            > > >
                            > > > APRS/Digi/Gateway Enabled
                            > > >
                            > > > I have all the html file in the html folder no subfolders the link
                            > > >
                            > > > http://www.ve9sc.com:84/Node/Routes.html
                            > > >
                            > > > try the aprs link it will not work nor will that link "APRS" from any of
                            > > the
                            > > > node pages.
                            > > >
                            > > > But http://www.ve9sc.com:84/allrf.html works if appears the link is adding
                            > > a
                            > > > folder aprs.
                            > > > http://www.ve9sc.com:84/aprs/all.html
                            > > >
                            > > > I looked at the debug log
                            > > >
                            > > > 120610 00:00:02 ! |Enter HouseKeeping
                            > > > 120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 02:07:37 ! Too Many Program Errors - Closing
                            > > > 120610 02:07:37 ! Attempting to Restart C:\Program
                            > > > Files\BPQ32\BPQMailChat.exe
                            > > > 120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to
                            > > HouseKeeping
                            > > > 78674
                            > > > 120610 02:08:46 ! Program Starting
                            > > > 120610 02:08:46 ! BPQMailChat Starting
                            > > > 120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 06:23:18 ! Too Many Program Errors - Closing
                            > > > 120610 06:23:18 ! Attempting to Restart C:\Program
                            > > > Files\BPQ32\BPQMailChat.exe
                            > > > 120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to
                            > > HouseKeeping
                            > > > 63324
                            > > > 120610 06:24:36 ! Program Starting
                            > > > 120610 06:24:36 ! BPQMailChat Starting
                            > > > 120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 10:39:05 ! Too Many Program Errors - Closing
                            > > > 120610 10:39:05 ! Attempting to Restart C:\Program
                            > > > Files\BPQ32\BPQMailChat.exe
                            > > > 120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to
                            > > HouseKeeping
                            > > > 47986
                            > > > 120610 10:40:14 ! Program Starting
                            > > > 120610 10:40:14 ! BPQMailChat Starting
                            > > > 120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 14:54:44 ! Too Many Program Errors - Closing
                            > > > 120610 14:54:44 ! Attempting to Restart C:\Program
                            > > > Files\BPQ32\BPQMailChat.exe
                            > > > 120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to
                            > > HouseKeeping
                            > > > 32644
                            > > > 120610 14:55:56 ! Program Starting
                            > > > 120610 14:55:56 ! BPQMailChat Starting
                            > > > 120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > > 120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                            > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                            > > >
                            > > > I am not sure where to go from here.
                            > > >
                            > > > Stephen
                            > > >
                            > > > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                            > > <mailto:BPQ32%40yahoogroups.com> , "John
                            > > > Wiseman" <john.wiseman@> wrote:
                            > > > >
                            > > > > Stephen,
                            > > > >
                            > > > >
                            > > > >
                            > > > > You should probably comment out or change the FloodCalls, DigiCalls, and
                            > > > > OBJECT statements.
                            > > > >
                            > > > >
                            > > > >
                            > > > > Usually the ISHOST is an APRS-IS server, but if the server you are
                            > > running
                            > > > > locally emulates an IS server, that should be ok. Do you get any error
                            > > > > message on the console screen when you load bpa32?
                            > > > >
                            > > > >
                            > > > >
                            > > > > The APRS page templates should be directly in folder BPQAPRS/HTML - not
                            > > a
                            > > > > subfolder, under your BPQ32 config folder.
                            > > > >
                            > > > >
                            > > > >
                            > > > > 73,
                            > > > >
                            > > > > John
                            > > > >
                            > > > >
                            > > > >
                            > > > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                            > > <mailto:BPQ32%40yahoogroups.com>
                            > > > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                            > > <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                            > > > Of
                            > > > > STEPHEN
                            > > > > Sent: 10 June 2012 15:52
                            > > > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                            > > <mailto:BPQ32%40yahoogroups.com>
                            > > > > Subject: [BPQ32] Problem with APRS and Web Pages
                            > > > >
                            > > > >
                            > > > >
                            > > > >
                            > > > >
                            > > > > I did the last install all worked fine with the install. I added the
                            > > html
                            > > > > and aprs web pages. But the aprs seems to be not working.
                            > > > >
                            > > > > I added the following from example to the script:
                            > > > >
                            > > > > APRSDIGI
                            > > > >
                            > > > > APRSCall VE1MPF-10
                            > > > > StatusMsg=BPQ32 IGate Moncton , New Brunswick , Canada
                            > > > >
                            > > > > Symbol=a ; Icon to display for station.
                            > > > > Symset=B ; This is a "B" in a Red Diamond.
                            > > > >
                            > > > > ;
                            > > > > ; Specify a Dest Addreess and Path for each port you want to use for
                            > > APRS.
                            > > > > No dest means receive only port
                            > > > > ; Ports without an APRSPath statement will not be used by the Digi
                            > > > > ;
                            > > > > ; Note if you specify APRS as the destination call it will be replaced
                            > > by
                            > > > > the current BPQ32 APRS
                            > > > > ; identification destination - APBPQ1. If you really want to send APRS,
                            > > > > specify APRS-0.
                            > > > >
                            > > > > APRSPath 1= ; Receive only port
                            > > > > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
                            > > > > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
                            > > > >
                            > > > > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
                            > > > > MobileBeaconInterval=2 ; Beacon interval when moving
                            > > > >
                            > > > > ; Define Crossport Digi. For each port, a list of ports to send a packet
                            > > > to
                            > > > > (IS means send to APRS-IS)
                            > > > > ; If a Digimap isn't specified for a port, digi out on the port the
                            > > packet
                            > > > > arrived on,
                            > > > > ; and send to APRS-IS (if enabled)
                            > > > > ; If you want to digi on same port, but not send to APRS-IS, Specify
                            > > > Digimap
                            > > > > n=n
                            > > > > ; If you dont want to digi on a port, specify Digimap n=
                            > > > > ;
                            > > > > ; If you only have one APRS port, you probably don't need a Digimap
                            > > > > statement
                            > > > >
                            > > > > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
                            > > > > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
                            > > > > ;Digimap 9= ; Don't digi packets received on port 9
                            > > > >
                            > > > > ; Define Digipeating parameters
                            > > > >
                            > > > > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
                            > > > > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
                            > > > > DigiCalls=SKIG ; Calls for Normal (ie no SSID manipulation) Digi
                            > > > > ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave out
                            > > > > TraceCalls and FloodCalls
                            > > > >
                            > > > > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the
                            > > > > call to be left as it is received.
                            > > > >
                            > > > > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is
                            > > > > received with n greater than
                            > > > > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is
                            > > > decremented.
                            > > > >
                            > > > > ; Specify position. You can specify a fixed LAT/LONG, or use GPS
                            > > > >
                            > > > > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
                            > > > > LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)
                            > > > >
                            > > > > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
                            > > > > GPSSpeed=0 ; overriding the values set above.
                            > > > >
                            > > > > ; The Digi can generate Object and Item reports.
                            > > > >
                            > > > > ; The format is pretty strict - a single space between param=value
                            > > pairs,
                            > > > > ; a comma but no spaces in PATH and PORT string.
                            > > > >
                            > > > > ; Minimum interval is 10 mins. You can have as many OBJECT lines as you
                            > > > > need.
                            > > > > ; See thr APRS specification for information on how to format an Object
                            > > or
                            > > > > Item string.
                            > > > >
                            > > > > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
                            > > > > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
                            > > > >
                            > > > > ; IGATE Params. If specified you will gate RF packets and your beacons
                            > > to
                            > > > > APRS-IS
                            > > > >
                            > > > > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an IPV6
                            > > > Host
                            > > > > ISPort=10152 ; Normal port for a filtered feed
                            > > > > ISPasscode=17580 ; If you don't already have a passcode I can issue you
                            > > > one.
                            > > > > ;
                            > > > > ; You can specify a filter command to be sent when you log on to
                            > > APRS-IS.
                            > > > > Normally you don't
                            > > > > ; need one. The APRS Mapping Application (BPQAPRS) sets a filter when it
                            > > > > starts,
                            > > > > ; and if you aren't running an APRS application, there isn't much point
                            > > in
                            > > > > getting info from APRS-IS
                            > > > > ;
                            > > > > ISFilter=m/50 ; Filter Command if needed
                            > > > >
                            > > > > ***
                            > > > > ;
                            > > > >
                            > > > > The problem is it is not connecting to the aprs server. I have tried
                            > > sever
                            > > > > servers and I run the one I am trying to connect to and it is working.
                            > > > > The second thing is the aprs pages I felt needed to be in a folder
                            > > 'aprs'
                            > > > > but would not work page not found it appears anything in the root works
                            > > > but
                            > > > > not in a folder.
                            > > > >
                            > > > > do I have something wrong or am I missing something.
                            > > > >
                            > > > > Stephen
                            > > > >
                            > > >
                            > >
                            >

                             

                            --
                            Message sent via Ubuntu 11.04 & ThunderBird

                          • Gerhard.F5VAG
                            ... Ken, The request your server is sending is not correct. It sends:
                            Message 13 of 30 , Jun 10, 2012
                              On Sun, Jun 10, 2012 at 11:22 PM, ken <ken@...> wrote:

                              > ie: http://gb7cow.dyndns.org:5080/aprs/find.cgi?call=EI7IG
                              > all i am getting from Gerhards (F5VAG) server is a javascript error:  input is not valid
                              > I have the latest Java installed and the latest code from Gerhards Aprs website

                              Ken,

                              The request your server is sending is not correct.

                              It sends:
                              <iframe src="http://f5vag.nerim.net/maps/gstatmap.php?call=GB7COW-5&posit=50%c2%b059.70'N
                              4°28.84'W&sd=Digi&range=2"...

                              It is supposed to be:
                              <iframe src="http://f5vag.nerim.net/maps/gstatmap.php?call=GB7COW-5&posit=50%c2%b059.70'N,
                              4°28.84'W&sd=Digi&range=2"...

                              The UI-WebServer sends exactly ", " between latitude and longitude.
                              You are sending two spaces.


                              73 de Gerhard, F5VAG
                            • kenny
                              Hi John the ##LOCDDMMSS## did the job. all working now. thanks to all that replied 73 de Ken g7vja - gb7cow-3
                              Message 14 of 30 , Jun 10, 2012
                                Hi John
                                the ##LOCDDMMSS## did the job.
                                all working now.
                                thanks to all that replied

                                73 de Ken
                                g7vja - gb7cow-3



                                --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
                                >
                                > Ken,
                                >
                                >
                                >
                                > I suspect you are using the wrong tag for the location. It should be
                                > ##LOCDDMMSS##. This isn't the same as UIView.
                                >
                                >
                                >
                                > 73, John
                                >
                                > _____
                                >
                                > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of ken
                                > Sent: 10 June 2012 22:23
                                > To: BPQ32@yahoogroups.com
                                > Subject: Re: [BPQ32] Re: Problem with APRS and Web Pages
                                >
                                >
                                >
                                >
                                >
                                >
                                > Hi John
                                > I have my web server pages working.
                                > http://gb7cow.dyndns.org:5080
                                > only think it does not do for some reason is look up the station
                                > ie: http://gb7cow.dyndns.org:5080/aprs/find.cgi?call=EI7IG
                                > all i am getting from Gerhards (F5VAG) server is a javascript error: input
                                > is not valid
                                > I have the latest Java installed and the latest code from Gerhards Aprs
                                > website
                                >
                                > is it something i may have overlooked??
                                > apart from the above all is working well.
                                >
                                > 73 de Ken
                                > g7vja
                                > gb7cow-3
                                >
                                >
                                >
                                > On 10/06/12 20:01, John Wiseman wrote:
                                >
                                >
                                >
                                > The Node display pages are coded in the software. You can't change them,
                                > except to add a background image.
                                >
                                >
                                >
                                > Only the index files - index.html, indexnoaprs.html and nodemenu.html can be
                                > changed.
                                >
                                >
                                >
                                > John
                                >
                                >
                                >
                                >
                                > _____
                                >
                                >
                                > From: <mailto:BPQ32@yahoogroups.com> BPQ32@yahoogroups.com
                                > [mailto:BPQ32@yahoogroups.com] On Behalf Of STEPHEN
                                > Sent: 10 June 2012 19:54
                                > To: BPQ32@yahoogroups.com
                                > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                >
                                >
                                >
                                >
                                >
                                >
                                > John
                                > The Node/Nodes.html etc files to edit them where are they located?
                                >
                                > I can not seem to find them.
                                >
                                > It seems to be working well now.
                                >
                                > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "STEPHEN"
                                > <mailto:ve1mpf@> <ve1mpf@> wrote:
                                > >
                                > > I did a re-install of the update, and a fresh re-boot. I see the check box
                                > and it is working.
                                > >
                                > > Thanks
                                > >
                                > > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "John
                                > Wiseman" <john.wiseman@> wrote:
                                > > >
                                > > > Stephen
                                > > >
                                > > >
                                > > >
                                > > > You should have something like
                                > > >
                                > > >
                                > > >
                                > > >
                                > > >
                                > > >
                                > > >
                                > > > If the Igate line isn't there, then something very odd is going on - it
                                > > > suggests the APRS config was rejected, but it that case there should be
                                > > > error messages in the console window.
                                > > >
                                > > >
                                > > >
                                > > > Did you get "APRS Digi/Gateway Enabled" on the console window (after the
                                > > > "Initialising Port. " messages)?
                                > > >
                                > > >
                                > > >
                                > > > 73
                                > > >
                                > > > John
                                > > >
                                > > >
                                > > >
                                > > > _____
                                > > >
                                > > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                                > Of
                                > > > STEPHEN
                                > > > Sent: 10 June 2012 17:57
                                > > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                > > > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                > > >
                                > > >
                                > > >
                                > > >
                                > > >
                                > > > John
                                > > > we are getting closer
                                > > > The aprs pages are working but I still will not connect to the APRS
                                > server
                                > > > You stated "Check that the "Enable Igate" checkbox on the bpq32.dll
                                > console
                                > > > window is checked."
                                > > >
                                > > > I don't see a Enable Igate on the bpq32.dll window?
                                > > >
                                > > > I also changed the server as Mike stated.
                                > > >
                                > > > Thanks
                                > > >
                                > > > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                > <mailto:BPQ32%40yahoogroups.com> <mailto:BPQ32%40yahoogroups.com> , "John
                                > > > Wiseman" <john.wiseman@> wrote:
                                > > > >
                                > > > > Stephen,
                                > > > >
                                > > > >
                                > > > >
                                > > > > http://www.ve9sc.com:84/allrf.html isn't really working. The HTML is
                                > > > > returned, but the APRS data isn't being placed in the page. This
                                > suggests
                                > > > to
                                > > > > me that you have the APRS pages in BPQ32/HTML, not BPQ32/BPQAPRS/HTML.
                                >
                                > > > >
                                > > > >
                                > > > >
                                > > > > Check that the "Enable Igate" checkbox on the bpq32.dll console window
                                > is
                                > > > > checked. It should be set by default, but if it gets unset, the code
                                > won't
                                > > > > connect.
                                > > > >
                                > > > >
                                > > > >
                                > > > > I don't know why MailChat is giving a program error in Socket Data
                                > every
                                > > > 10
                                > > > > minutes, but this isn't related to the Web Server - it is most likely
                                > the
                                > > > > POP3 server trying to retrieve a message, and being upset by what it
                                > gets.
                                > > > > The LOG_TCP.txt file may give a clue as to what is going on.
                                > > > >
                                > > > >
                                > > > >
                                > > > > 73,
                                > > > >
                                > > > > John
                                > > > >
                                > > > >
                                > > > >
                                > > > >
                                > > > >
                                > > > >
                                > > > >
                                > > > >
                                > > > >
                                > > > > _____
                                > > > >
                                > > > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                > <mailto:BPQ32%40yahoogroups.com> <mailto:BPQ32%40yahoogroups.com>
                                > > > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                > <mailto:BPQ32%40yahoogroups.com> <mailto:BPQ32%40yahoogroups.com> ] On
                                > Behalf
                                > > > Of
                                > > > > STEPHEN
                                > > > > Sent: 10 June 2012 16:46
                                > > > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                > <mailto:BPQ32%40yahoogroups.com> <mailto:BPQ32%40yahoogroups.com>
                                > > > > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                > > > >
                                > > > >
                                > > > >
                                > > > >
                                > > > >
                                > > > > John
                                > > > >
                                > > > > I am running javAPRSSrvr 3.15b08 that should be fine.
                                > > > > http://www.ve9sc.com:14501/
                                > > > >
                                > > > > I know this works as i looked at Jerry's
                                > > > > http://w9bbs.no-ip.org:8080/ and it is working.
                                > > > >
                                > > > > I comment out FloodCalls, DigiCalls, and OBJECT statementsas you
                                > stated.
                                > > > >
                                > > > > Restarted BPQ and it still will not connect to the aprs server. I
                                > tried
                                > > > > other servers but they will not work either. I tried:
                                > > > >
                                > > > > The Main APRS servers "First" & "Second" etc.
                                > > > >
                                > > > > The console screen is fine no errors. It states :
                                > > > >
                                > > > > APRS/Digi/Gateway Enabled
                                > > > >
                                > > > > I have all the html file in the html folder no subfolders the link
                                > > > >
                                > > > > http://www.ve9sc.com:84/Node/Routes.html
                                > > > >
                                > > > > try the aprs link it will not work nor will that link "APRS" from any
                                > of
                                > > > the
                                > > > > node pages.
                                > > > >
                                > > > > But http://www.ve9sc.com:84/allrf.html works if appears the link is
                                > adding
                                > > > a
                                > > > > folder aprs.
                                > > > > http://www.ve9sc.com:84/aprs/all.html
                                > > > >
                                > > > > I looked at the debug log
                                > > > >
                                > > > > 120610 00:00:02 ! |Enter HouseKeeping
                                > > > > 120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 02:07:37 ! Too Many Program Errors - Closing
                                > > > > 120610 02:07:37 ! Attempting to Restart C:\Program
                                > > > > Files\BPQ32\BPQMailChat.exe
                                > > > > 120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to
                                > > > HouseKeeping
                                > > > > 78674
                                > > > > 120610 02:08:46 ! Program Starting
                                > > > > 120610 02:08:46 ! BPQMailChat Starting
                                > > > > 120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 06:23:18 ! Too Many Program Errors - Closing
                                > > > > 120610 06:23:18 ! Attempting to Restart C:\Program
                                > > > > Files\BPQ32\BPQMailChat.exe
                                > > > > 120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to
                                > > > HouseKeeping
                                > > > > 63324
                                > > > > 120610 06:24:36 ! Program Starting
                                > > > > 120610 06:24:36 ! BPQMailChat Starting
                                > > > > 120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 10:39:05 ! Too Many Program Errors - Closing
                                > > > > 120610 10:39:05 ! Attempting to Restart C:\Program
                                > > > > Files\BPQ32\BPQMailChat.exe
                                > > > > 120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to
                                > > > HouseKeeping
                                > > > > 47986
                                > > > > 120610 10:40:14 ! Program Starting
                                > > > > 120610 10:40:14 ! BPQMailChat Starting
                                > > > > 120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 14:54:44 ! Too Many Program Errors - Closing
                                > > > > 120610 14:54:44 ! Attempting to Restart C:\Program
                                > > > > Files\BPQ32\BPQMailChat.exe
                                > > > > 120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to
                                > > > HouseKeeping
                                > > > > 32644
                                > > > > 120610 14:55:56 ! Program Starting
                                > > > > 120610 14:55:56 ! BPQMailChat Starting
                                > > > > 120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > > 120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                > > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                > > > >
                                > > > > I am not sure where to go from here.
                                > > > >
                                > > > > Stephen
                                > > > >
                                > > > > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                > <mailto:BPQ32%40yahoogroups.com> <mailto:BPQ32%40yahoogroups.com>
                                > > > <mailto:BPQ32%40yahoogroups.com> <mailto:BPQ32%40yahoogroups.com> ,
                                > "John
                                > > > > Wiseman" <john.wiseman@> wrote:
                                > > > > >
                                > > > > > Stephen,
                                > > > > >
                                > > > > >
                                > > > > >
                                > > > > > You should probably comment out or change the FloodCalls, DigiCalls,
                                > and
                                > > > > > OBJECT statements.
                                > > > > >
                                > > > > >
                                > > > > >
                                > > > > > Usually the ISHOST is an APRS-IS server, but if the server you are
                                > > > running
                                > > > > > locally emulates an IS server, that should be ok. Do you get any
                                > error
                                > > > > > message on the console screen when you load bpa32?
                                > > > > >
                                > > > > >
                                > > > > >
                                > > > > > The APRS page templates should be directly in folder BPQAPRS/HTML -
                                > not
                                > > > a
                                > > > > > subfolder, under your BPQ32 config folder.
                                > > > > >
                                > > > > >
                                > > > > >
                                > > > > > 73,
                                > > > > >
                                > > > > > John
                                > > > > >
                                > > > > >
                                > > > > >
                                > > > > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                > <mailto:BPQ32%40yahoogroups.com> <mailto:BPQ32%40yahoogroups.com>
                                > > > <mailto:BPQ32%40yahoogroups.com> <mailto:BPQ32%40yahoogroups.com>
                                > > > > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                > <mailto:BPQ32%40yahoogroups.com> <mailto:BPQ32%40yahoogroups.com>
                                > > > <mailto:BPQ32%40yahoogroups.com> <mailto:BPQ32%40yahoogroups.com> ] On
                                > Behalf
                                > > > > Of
                                > > > > > STEPHEN
                                > > > > > Sent: 10 June 2012 15:52
                                > > > > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                > <mailto:BPQ32%40yahoogroups.com> <mailto:BPQ32%40yahoogroups.com>
                                > > > <mailto:BPQ32%40yahoogroups.com> <mailto:BPQ32%40yahoogroups.com>
                                > > > > > Subject: [BPQ32] Problem with APRS and Web Pages
                                > > > > >
                                > > > > >
                                > > > > >
                                > > > > >
                                > > > > >
                                > > > > > I did the last install all worked fine with the install. I added the
                                > > > html
                                > > > > > and aprs web pages. But the aprs seems to be not working.
                                > > > > >
                                > > > > > I added the following from example to the script:
                                > > > > >
                                > > > > > APRSDIGI
                                > > > > >
                                > > > > > APRSCall VE1MPF-10
                                > > > > > StatusMsg=BPQ32 IGate Moncton, New Brunswick, Canada
                                > > > > >
                                > > > > > Symbol=a ; Icon to display for station.
                                > > > > > Symset=B ; This is a "B" in a Red Diamond.
                                > > > > >
                                > > > > > ;
                                > > > > > ; Specify a Dest Addreess and Path for each port you want to use for
                                > > > APRS.
                                > > > > > No dest means receive only port
                                > > > > > ; Ports without an APRSPath statement will not be used by the Digi
                                > > > > > ;
                                > > > > > ; Note if you specify APRS as the destination call it will be
                                > replaced
                                > > > by
                                > > > > > the current BPQ32 APRS
                                > > > > > ; identification destination - APBPQ1. If you really want to send
                                > APRS,
                                > > > > > specify APRS-0.
                                > > > > >
                                > > > > > APRSPath 1= ; Receive only port
                                > > > > > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
                                > > > > > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
                                > > > > >
                                > > > > > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
                                > > > > > MobileBeaconInterval=2 ; Beacon interval when moving
                                > > > > >
                                > > > > > ; Define Crossport Digi. For each port, a list of ports to send a
                                > packet
                                > > > > to
                                > > > > > (IS means send to APRS-IS)
                                > > > > > ; If a Digimap isn't specified for a port, digi out on the port the
                                > > > packet
                                > > > > > arrived on,
                                > > > > > ; and send to APRS-IS (if enabled)
                                > > > > > ; If you want to digi on same port, but not send to APRS-IS, Specify
                                > > > > Digimap
                                > > > > > n=n
                                > > > > > ; If you dont want to digi on a port, specify Digimap n=
                                > > > > > ;
                                > > > > > ; If you only have one APRS port, you probably don't need a Digimap
                                > > > > > statement
                                > > > > >
                                > > > > > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
                                > > > > > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
                                > > > > > ;Digimap 9= ; Don't digi packets received on port 9
                                > > > > >
                                > > > > > ; Define Digipeating parameters
                                > > > > >
                                > > > > > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
                                > > > > > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
                                > > > > > DigiCalls=SKIG ; Calls for Normal (ie no SSID manipulation) Digi
                                > > > > > ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave out
                                > > > > > TraceCalls and FloodCalls
                                > > > > >
                                > > > > > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want
                                > the
                                > > > > > call to be left as it is received.
                                > > > > >
                                > > > > > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet
                                > is
                                > > > > > received with n greater than
                                > > > > > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is
                                > > > > decremented.
                                > > > > >
                                > > > > > ; Specify position. You can specify a fixed LAT/LONG, or use GPS
                                > > > > >
                                > > > > > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
                                > > > > > LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)
                                > > > > >
                                > > > > > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
                                > > > > > GPSSpeed=0 ; overriding the values set above.
                                > > > > >
                                > > > > > ; The Digi can generate Object and Item reports.
                                > > > > >
                                > > > > > ; The format is pretty strict - a single space between param=value
                                > > > pairs,
                                > > > > > ; a comma but no spaces in PATH and PORT string.
                                > > > > >
                                > > > > > ; Minimum interval is 10 mins. You can have as many OBJECT lines as
                                > you
                                > > > > > need.
                                > > > > > ; See thr APRS specification for information on how to format an
                                > Object
                                > > > or
                                > > > > > Item string.
                                > > > > >
                                > > > > > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
                                > > > > > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
                                > > > > >
                                > > > > > ; IGATE Params. If specified you will gate RF packets and your
                                > beacons
                                > > > to
                                > > > > > APRS-IS
                                > > > > >
                                > > > > > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an
                                > IPV6
                                > > > > Host
                                > > > > > ISPort=10152 ; Normal port for a filtered feed
                                > > > > > ISPasscode=17580 ; If you don't already have a passcode I can issue
                                > you
                                > > > > one.
                                > > > > > ;
                                > > > > > ; You can specify a filter command to be sent when you log on to
                                > > > APRS-IS.
                                > > > > > Normally you don't
                                > > > > > ; need one. The APRS Mapping Application (BPQAPRS) sets a filter
                                > when it
                                > > > > > starts,
                                > > > > > ; and if you aren't running an APRS application, there isn't much
                                > point
                                > > > in
                                > > > > > getting info from APRS-IS
                                > > > > > ;
                                > > > > > ISFilter=m/50 ; Filter Command if needed
                                > > > > >
                                > > > > > ***
                                > > > > > ;
                                > > > > >
                                > > > > > The problem is it is not connecting to the aprs server. I have tried
                                > > > sever
                                > > > > > servers and I run the one I am trying to connect to and it is
                                > working.
                                > > > > > The second thing is the aprs pages I felt needed to be in a folder
                                > > > 'aprs'
                                > > > > > but would not work page not found it appears anything in the root
                                > works
                                > > > > but
                                > > > > > not in a folder.
                                > > > > >
                                > > > > > do I have something wrong or am I missing something.
                                > > > > >
                                > > > > > Stephen
                                > > > > >
                                > > > >
                                > > >
                                > >
                                >
                                >
                                >
                                > --
                                > Message sent via Ubuntu 11.04 & ThunderBird
                                >
                              • Michael Mullikin
                                Hi John I seem to have a problem with BPQ32 Window. I notice your picture of Bpq dll consol Shows a top line identifying the window. When BPQ runs the only
                                Message 15 of 30 , Jun 11, 2012

                                  Hi John

                                  I seem to have a problem with BPQ32 Window.  I notice your picture of Bpq dll consol

                                  Shows a top line identifying the window.  When BPQ runs the only top line on the windows is the BPQ consol None of the other windows show the header line.  Also if I click the minimize button on the BPQ consol it disappears in to computer land.  I cant  find it and cant bring it back up.  I have to shut down the program and restart it to get it to come back.  I am using widows XP PRO service pack 3.  I  there a setting I need to adjust???

                                   

                                  Thank You 

                                  Mike  W8EHH


                                  From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of John Wiseman
                                  Sent: Sunday, June 10, 2012 1:16 PM
                                  To: BPQ32@yahoogroups.com
                                  Subject: RE: [BPQ32] Re: Problem with APRS and Web Pages

                                   

                                   

                                  Stephen

                                   

                                  You should have something like

                                   

                                   

                                  If the Igate line isn’t there, then something very odd is going on – it suggests the APRS config was rejected, but it that case there should be error messages in the console window.

                                   

                                  Did you get “APRS Digi/Gateway Enabled” on the console window (after the “ Initialising Port … “ messages)?

                                   

                                  73

                                  John

                                   


                                  From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of STEPHEN
                                  Sent: 10 June 2012 17:57
                                  To: BPQ32@yahoogroups.com
                                  Subject: [BPQ32] Re: Problem with APRS and Web Pages

                                   

                                   

                                  John
                                  we are getting closer
                                  The aprs pages are working but I still will not connect to the APRS server
                                  You stated "Check that the "Enable Igate" checkbox on the bpq32.dll console window is checked."

                                  I don't see a Enable Igate on the bpq32.dll window?

                                  I also changed the server as Mike stated.

                                  Thanks

                                  --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:

                                  >
                                  > Stephen,
                                  >
                                  >
                                  >
                                  > http://www.ve9sc.com:84/allrf.html
                                  isn't really working. The HTML is
                                  > returned, but the APRS data isn't being placed in the page. This suggests
                                  to
                                  > me that you have the APRS pages in BPQ32/HTML, not BPQ32/BPQAPRS/HTML.
                                  >
                                  >
                                  >
                                  > Check that the "Enable Igate" checkbox on the bpq32.dll console
                                  window is
                                  > checked. It should be set by default, but if it gets unset, the code won't
                                  > connect.
                                  >
                                  >
                                  >
                                  > I don't know why MailChat is giving a program error in Socket Data every
                                  10
                                  > minutes, but this isn't related to the Web Server - it is most likely the
                                  > POP3 server trying to retrieve a message, and being upset by what it gets.
                                  > The LOG_TCP.txt file may give a clue as to what is going on.
                                  >
                                  >
                                  >
                                  > 73,
                                  >
                                  > John
                                  >
                                  >
                                  >
                                  >
                                  >
                                  >
                                  >
                                  >
                                  >
                                  > _____
                                  >
                                  > From: BPQ32@yahoogroups.com
                                  [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                  > STEPHEN
                                  > Sent: 10 June 2012 16:46
                                  > To: BPQ32@yahoogroups.com
                                  > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                  >
                                  >
                                  >
                                  >
                                  >
                                  > John
                                  >
                                  > I am running javAPRSSrvr 3.15b08 that should be fine.
                                  > http://www.ve9sc.com:14501/
                                  >
                                  > I know this works as i looked at Jerry's
                                  > http://w9bbs.no-ip.org:8080/
                                  and it is working.
                                  >
                                  > I comment out FloodCalls, DigiCalls, and OBJECT statementsas you stated.
                                  >
                                  > Restarted BPQ and it still will not connect to the aprs server. I tried
                                  > other servers but they will not work either. I tried:
                                  >
                                  > The Main APRS servers "First" & "Second" etc.
                                  >
                                  > The console screen is fine no errors. It states :
                                  >
                                  > APRS/Digi/Gateway Enabled
                                  >
                                  > I have all the html file in the html folder no subfolders the link
                                  >
                                  > http://www.ve9sc.com:84/Node/Routes.html
                                  >
                                  > try the aprs link it will not work nor will that link "APRS"
                                  from any of the
                                  > node pages.
                                  >
                                  > But http://www.ve9sc.com:84/allrf.html
                                  works if appears the link is adding a
                                  > folder aprs.
                                  > http://www.ve9sc.com:84/aprs/all.html
                                  >
                                  > I looked at the debug log
                                  >
                                  > 120610 00:00:02 ! |Enter HouseKeeping
                                  > 120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 02:07:37 ! Too Many Program Errors - Closing
                                  > 120610 02:07:37 ! Attempting to Restart C:\Program
                                  > Files\BPQ32\BPQMailChat.exe
                                  > 120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to
                                  HouseKeeping
                                  > 78674
                                  > 120610 02:08:46 ! Program Starting
                                  > 120610 02:08:46 ! BPQMailChat Starting
                                  > 120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 06:23:18 ! Too Many Program Errors - Closing
                                  > 120610 06:23:18 ! Attempting to Restart C:\Program
                                  > Files\BPQ32\BPQMailChat.exe
                                  > 120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to
                                  HouseKeeping
                                  > 63324
                                  > 120610 06:24:36 ! Program Starting
                                  > 120610 06:24:36 ! BPQMailChat Starting
                                  > 120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 10:39:05 ! Too Many Program Errors - Closing
                                  > 120610 10:39:05 ! Attempting to Restart C:\Program
                                  > Files\BPQ32\BPQMailChat.exe
                                  > 120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to
                                  HouseKeeping
                                  > 47986
                                  > 120610 10:40:14 ! Program Starting
                                  > 120610 10:40:14 ! BPQMailChat Starting
                                  > 120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 14:54:44 ! Too Many Program Errors - Closing
                                  > 120610 14:54:44 ! Attempting to Restart C:\Program
                                  > Files\BPQ32\BPQMailChat.exe
                                  > 120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to
                                  HouseKeeping
                                  > 32644
                                  > 120610 14:55:56 ! Program Starting
                                  > 120610 14:55:56 ! BPQMailChat Starting
                                  > 120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  > 120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                  >
                                  > I am not sure where to go from here.
                                  >
                                  > Stephen
                                  >
                                  > --- In BPQ32@yahoogroups.com
                                  <mailto:BPQ32%40yahoogroups.com> , "John
                                  > Wiseman" <john.wiseman@> wrote:
                                  > >
                                  > > Stephen,
                                  > >
                                  > >
                                  > >
                                  > > You should probably comment out or change the FloodCalls, DigiCalls,
                                  and
                                  > > OBJECT statements.
                                  > >
                                  > >
                                  > >
                                  > > Usually the ISHOST is an APRS-IS server, but if the server you are
                                  running
                                  > > locally emulates an IS server, that should be ok. Do you get any
                                  error
                                  > > message on the console screen when you load bpa32?
                                  > >
                                  > >
                                  > >
                                  > > The APRS page templates should be directly in folder BPQAPRS/HTML -
                                  not a
                                  > > subfolder, under your BPQ32 config folder.
                                  > >
                                  > >
                                  > >
                                  > > 73,
                                  > >
                                  > > John
                                  > >
                                  > >
                                  > >
                                  > > From: BPQ32@yahoogroups.com
                                  <mailto:BPQ32%40yahoogroups.com>
                                  > [mailto:BPQ32@yahoogroups.com
                                  <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                                  > Of
                                  > > STEPHEN
                                  > > Sent: 10 June 2012 15:52
                                  > > To: BPQ32@yahoogroups.com
                                  <mailto:BPQ32%40yahoogroups.com>
                                  > > Subject: [BPQ32] Problem with APRS and Web Pages
                                  > >
                                  > >
                                  > >
                                  > >
                                  > >
                                  > > I did the last install all worked fine with the install. I added the
                                  html
                                  > > and aprs web pages. But the aprs seems to be not working.
                                  > >
                                  > > I added the following from example to the script:
                                  > >
                                  > > APRSDIGI
                                  > >
                                  > > APRSCall VE1MPF-10
                                  > > StatusMsg=BPQ32 IGate
                                  Moncton , New Brunswick , Canada
                                  > >
                                  > > Symbol=a ; Icon to display for station.
                                  > > Symset=B ; This is a "B" in a Red Diamond.
                                  > >
                                  > > ;
                                  > > ; Specify a Dest Addreess and Path for each port you want to use for
                                  APRS.
                                  > > No dest means receive only port
                                  > > ; Ports without an APRSPath statement will not be used by the Digi
                                  > > ;
                                  > > ; Note if you specify APRS as the destination call it will be
                                  replaced by
                                  > > the current BPQ32 APRS
                                  > > ; identification destination - APBPQ1. If you really want to send
                                  APRS,
                                  > > specify APRS-0.
                                  > >
                                  > > APRSPath 1= ; Receive only port
                                  > > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
                                  > > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
                                  > >
                                  > > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
                                  > > MobileBeaconInterval=2 ; Beacon interval when moving
                                  > >
                                  > > ; Define Crossport Digi. For each port, a list of ports to send a
                                  packet
                                  > to
                                  > > (IS means send to APRS-IS)
                                  > > ; If a Digimap isn't specified for a port, digi out on the port the
                                  packet
                                  > > arrived on,
                                  > > ; and send to APRS-IS (if enabled)
                                  > > ; If you want to digi on same port, but not send to APRS-IS, Specify
                                  > Digimap
                                  > > n=n
                                  > > ; If you dont want to digi on a port, specify Digimap n=
                                  > > ;
                                  > > ; If you only have one APRS port, you probably don't need a Digimap
                                  > > statement
                                  > >
                                  > > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
                                  > > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
                                  > > ;Digimap 9= ; Don't digi packets received on port 9
                                  > >
                                  > > ; Define Digipeating parameters
                                  > >
                                  > > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
                                  > > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
                                  > > DigiCalls=SKIG ; Calls for
                                  w:st="on">Normal (ie no SSID manipulation) Digi
                                  > > ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave
                                  out
                                  > > TraceCalls and FloodCalls
                                  > >
                                  > > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want
                                  the
                                  > > call to be left as it is received.
                                  > >
                                  > > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is
                                  > > received with n greater than
                                  > > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is
                                  > decremented.
                                  > >
                                  > > ; Specify position. You can specify a fixed LAT/LONG, or use GPS
                                  > >
                                  > > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
                                  > > LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)
                                  > >
                                  > > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
                                  > > GPSSpeed=0 ; overriding the values set above.
                                  > >
                                  > > ; The Digi can generate Object and Item reports.
                                  > >
                                  > > ; The format is pretty strict - a single space between param=value
                                  pairs,
                                  > > ; a comma but no spaces in PATH and PORT string.
                                  > >
                                  > > ; Minimum interval is 10 mins. You can have as many OBJECT lines as
                                  you
                                  > > need.
                                  > > ; See thr APRS specification for information on how to format an
                                  Object or
                                  > > Item string.
                                  > >
                                  > > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
                                  > > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
                                  > >
                                  > > ; IGATE Params. If specified you will gate RF packets and your
                                  beacons to
                                  > > APRS-IS
                                  > >
                                  > > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an
                                  IPV6
                                  > Host
                                  > > ISPort=10152 ; Normal
                                  port for a filtered feed
                                  > > ISPasscode=17580 ; If you don't already have a passcode I can issue
                                  you
                                  > one.
                                  > > ;
                                  > > ; You can specify a filter command to be sent when you log on to
                                  APRS-IS.
                                  > > Normally you don't
                                  > > ; need one. The APRS Mapping Application (BPQAPRS) sets a filter when
                                  it
                                  > > starts,
                                  > > ; and if you aren't running an APRS application, there isn't much
                                  point in
                                  > > getting info from APRS-IS
                                  > > ;
                                  > > ISFilter=m/50 ; Filter Command if needed
                                  > >
                                  > > ***
                                  > > ;
                                  > >
                                  > > The problem is it is not connecting to the aprs server. I have tried
                                  sever
                                  > > servers and I run the one I am trying to connect to and it is
                                  working.
                                  > > The second thing is the aprs pages I felt needed to be in a folder
                                  'aprs'
                                  > > but would not work page not found it appears anything in the root
                                  works
                                  > but
                                  > > not in a folder.
                                  > >
                                  > > do I have something wrong or am I missing something.
                                  > >
                                  > > Stephen
                                  > >
                                  >

                                • Mike Melnik
                                  Mike Send me your bpq32.cfg Mike-N9PMO www.n9pmo.com mmelnik1@wi.rr.com ... From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Michael
                                  Message 16 of 30 , Jun 11, 2012
                                    Mike

                                    Send me your bpq32.cfg

                                    Mike-N9PMO
                                    www.n9pmo.com
                                    mmelnik1@...

                                    -----Original Message-----
                                    From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                    Michael Mullikin
                                    Sent: Monday, June 11, 2012 8:53 AM
                                    To: BPQ32@yahoogroups.com
                                    Subject: RE: [BPQ32] Re: Problem BPQ 32 windows

                                     
                                    Hi John
                                    I seem to have a problem with BPQ32 Window.  I notice your picture of Bpq
                                    dll consol
                                    Shows a top line identifying the window.  When BPQ runs the only top line on
                                    the windows is the BPQ consol None of the other windows show the header
                                    line.  Also if I click the minimize button on the BPQ consol it disappears
                                    in to computer land.  I cant  find it and cant bring it back up.  I have to
                                    shut down the program and restart it to get it to come back.  I am using
                                    widows XP PRO service pack 3.  I  there a setting I need to adjust???
                                     
                                    Thank You 
                                    Mike  W8EHH

                                    From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of John
                                    Wiseman
                                    Sent: Sunday, June 10, 2012 1:16 PM
                                    To: BPQ32@yahoogroups.com
                                    Subject: RE: [BPQ32] Re: Problem with APRS and Web Pages
                                     
                                     
                                    Stephen
                                     
                                    You should have something like
                                     

                                     
                                    If the Igate line isn’t there, then something very odd is going on – it
                                    suggests the APRS config was rejected, but it that case there should be
                                    error messages in the console window.
                                     
                                    Did you get “APRS Digi/Gateway Enabled” on the console window (after the
                                    “Initialising Port… “ messages)?
                                     
                                    73
                                    John
                                     

                                    From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                    STEPHEN
                                    Sent: 10 June 2012 17:57
                                    To: BPQ32@yahoogroups.com
                                    Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                     
                                     
                                    John
                                    we are getting closer
                                    The aprs pages are working but I still will not connect to the APRS server
                                    You stated "Check that the "Enable Igate" checkbox on the bpq32.dll console
                                    window is checked."

                                    I don't see a Enable Igate on the bpq32.dll window?

                                    I also changed the server as Mike stated.

                                    Thanks

                                    --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
                                    >
                                    > Stephen,
                                    >
                                    >
                                    >
                                    > http://www.ve9sc.com:84/allrf.html isn't really working. The HTML is
                                    > returned, but the APRS data isn't being placed in the page. This suggests
                                    to
                                    > me that you have the APRS pages in BPQ32/HTML, not BPQ32/BPQAPRS/HTML.
                                    >
                                    >
                                    >
                                    > Check that the "Enable Igate" checkbox on the bpq32.dll console window is
                                    > checked. It should be set by default, but if it gets unset, the code won't
                                    > connect.
                                    >
                                    >
                                    >
                                    > I don't know why MailChat is giving a program error in Socket Data every
                                    10
                                    > minutes, but this isn't related to the Web Server - it is most likely the
                                    > POP3 server trying to retrieve a message, and being upset by what it gets.
                                    > The LOG_TCP.txt file may give a clue as to what is going on.
                                    >
                                    >
                                    >
                                    > 73,
                                    >
                                    > John
                                    >
                                    >
                                    >
                                    >
                                    >
                                    >
                                    >
                                    >
                                    >
                                    > _____
                                    >
                                    > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                    > STEPHEN
                                    > Sent: 10 June 2012 16:46
                                    > To: BPQ32@yahoogroups.com
                                    > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                    >
                                    >
                                    >
                                    >
                                    >
                                    > John
                                    >
                                    > I am running javAPRSSrvr 3.15b08 that should be fine.
                                    > http://www.ve9sc.com:14501/
                                    >
                                    > I know this works as i looked at Jerry's
                                    > http://w9bbs.no-ip.org:8080/ and it is working.
                                    >
                                    > I comment out FloodCalls, DigiCalls, and OBJECT statementsas you stated.
                                    >
                                    > Restarted BPQ and it still will not connect to the aprs server. I tried
                                    > other servers but they will not work either. I tried:
                                    >
                                    > The Main APRS servers "First" & "Second" etc.
                                    >
                                    > The console screen is fine no errors. It states :
                                    >
                                    > APRS/Digi/Gateway Enabled
                                    >
                                    > I have all the html file in the html folder no subfolders the link
                                    >
                                    > http://www.ve9sc.com:84/Node/Routes.html
                                    >
                                    > try the aprs link it will not work nor will that link "APRS" from any of
                                    the
                                    > node pages.
                                    >
                                    > But http://www.ve9sc.com:84/allrf.html works if appears the link is adding
                                    a
                                    > folder aprs.
                                    > http://www.ve9sc.com:84/aprs/all.html
                                    >
                                    > I looked at the debug log
                                    >
                                    > 120610 00:00:02 ! |Enter HouseKeeping
                                    > 120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 02:07:37 ! Too Many Program Errors - Closing
                                    > 120610 02:07:37 ! Attempting to Restart C:\Program
                                    > Files\BPQ32\BPQMailChat.exe
                                    > 120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to
                                    HouseKeeping
                                    > 78674
                                    > 120610 02:08:46 ! Program Starting
                                    > 120610 02:08:46 ! BPQMailChat Starting
                                    > 120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 06:23:18 ! Too Many Program Errors - Closing
                                    > 120610 06:23:18 ! Attempting to Restart C:\Program
                                    > Files\BPQ32\BPQMailChat.exe
                                    > 120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to
                                    HouseKeeping
                                    > 63324
                                    > 120610 06:24:36 ! Program Starting
                                    > 120610 06:24:36 ! BPQMailChat Starting
                                    > 120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 10:39:05 ! Too Many Program Errors - Closing
                                    > 120610 10:39:05 ! Attempting to Restart C:\Program
                                    > Files\BPQ32\BPQMailChat.exe
                                    > 120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to
                                    HouseKeeping
                                    > 47986
                                    > 120610 10:40:14 ! Program Starting
                                    > 120610 10:40:14 ! BPQMailChat Starting
                                    > 120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 14:54:44 ! Too Many Program Errors - Closing
                                    > 120610 14:54:44 ! Attempting to Restart C:\Program
                                    > Files\BPQ32\BPQMailChat.exe
                                    > 120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to
                                    HouseKeeping
                                    > 32644
                                    > 120610 14:55:56 ! Program Starting
                                    > 120610 14:55:56 ! BPQMailChat Starting
                                    > 120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    > 120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                    >
                                    > I am not sure where to go from here.
                                    >
                                    > Stephen
                                    >
                                    > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "John
                                    > Wiseman" <john.wiseman@> wrote:
                                    > >
                                    > > Stephen,
                                    > >
                                    > >
                                    > >
                                    > > You should probably comment out or change the FloodCalls, DigiCalls, and
                                    > > OBJECT statements.
                                    > >
                                    > >
                                    > >
                                    > > Usually the ISHOST is an APRS-IS server, but if the server you are
                                    running
                                    > > locally emulates an IS server, that should be ok. Do you get any error
                                    > > message on the console screen when you load bpa32?
                                    > >
                                    > >
                                    > >
                                    > > The APRS page templates should be directly in folder BPQAPRS/HTML - not
                                    a
                                    > > subfolder, under your BPQ32 config folder.
                                    > >
                                    > >
                                    > >
                                    > > 73,
                                    > >
                                    > > John
                                    > >
                                    > >
                                    > >
                                    > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                    > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                                    > Of
                                    > > STEPHEN
                                    > > Sent: 10 June 2012 15:52
                                    > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                    > > Subject: [BPQ32] Problem with APRS and Web Pages
                                    > >
                                    > >
                                    > >
                                    > >
                                    > >
                                    > > I did the last install all worked fine with the install. I added the
                                    html
                                    > > and aprs web pages. But the aprs seems to be not working.
                                    > >
                                    > > I added the following from example to the script:
                                    > >
                                    > > APRSDIGI
                                    > >
                                    > > APRSCall VE1MPF-10
                                    > > StatusMsg=BPQ32 IGate Moncton, New Brunswick, Canada
                                    > >
                                    > > Symbol=a ; Icon to display for station.
                                    > > Symset=B ; This is a "B" in a Red Diamond.
                                    > >
                                    > > ;
                                    > > ; Specify a Dest Addreess and Path for each port you want to use for
                                    APRS.
                                    > > No dest means receive only port
                                    > > ; Ports without an APRSPath statement will not be used by the Digi
                                    > > ;
                                    > > ; Note if you specify APRS as the destination call it will be replaced
                                    by
                                    > > the current BPQ32 APRS
                                    > > ; identification destination - APBPQ1. If you really want to send APRS,
                                    > > specify APRS-0.
                                    > >
                                    > > APRSPath 1= ; Receive only port
                                    > > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
                                    > > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
                                    > >
                                    > > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
                                    > > MobileBeaconInterval=2 ; Beacon interval when moving
                                    > >
                                    > > ; Define Crossport Digi. For each port, a list of ports to send a packet
                                    > to
                                    > > (IS means send to APRS-IS)
                                    > > ; If a Digimap isn't specified for a port, digi out on the port the
                                    packet
                                    > > arrived on,
                                    > > ; and send to APRS-IS (if enabled)
                                    > > ; If you want to digi on same port, but not send to APRS-IS, Specify
                                    > Digimap
                                    > > n=n
                                    > > ; If you dont want to digi on a port, specify Digimap n=
                                    > > ;
                                    > > ; If you only have one APRS port, you probably don't need a Digimap
                                    > > statement
                                    > >
                                    > > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
                                    > > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
                                    > > ;Digimap 9= ; Don't digi packets received on port 9
                                    > >
                                    > > ; Define Digipeating parameters
                                    > >
                                    > > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
                                    > > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
                                    > > DigiCalls=SKIG ; Calls for Normal (ie no SSID manipulation) Digi
                                    > > ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave out
                                    > > TraceCalls and FloodCalls
                                    > >
                                    > > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the
                                    > > call to be left as it is received.
                                    > >
                                    > > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is
                                    > > received with n greater than
                                    > > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is
                                    > decremented.
                                    > >
                                    > > ; Specify position. You can specify a fixed LAT/LONG, or use GPS
                                    > >
                                    > > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
                                    > > LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)
                                    > >
                                    > > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
                                    > > GPSSpeed=0 ; overriding the values set above.
                                    > >
                                    > > ; The Digi can generate Object and Item reports.
                                    > >
                                    > > ; The format is pretty strict - a single space between param=value
                                    pairs,
                                    > > ; a comma but no spaces in PATH and PORT string.
                                    > >
                                    > > ; Minimum interval is 10 mins. You can have as many OBJECT lines as you
                                    > > need.
                                    > > ; See thr APRS specification for information on how to format an Object
                                    or
                                    > > Item string.
                                    > >
                                    > > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
                                    > > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
                                    > >
                                    > > ; IGATE Params. If specified you will gate RF packets and your beacons
                                    to
                                    > > APRS-IS
                                    > >
                                    > > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an IPV6
                                    > Host
                                    > > ISPort=10152 ; Normal port for a filtered feed
                                    > > ISPasscode=17580 ; If you don't already have a passcode I can issue you
                                    > one.
                                    > > ;
                                    > > ; You can specify a filter command to be sent when you log on to
                                    APRS-IS.
                                    > > Normally you don't
                                    > > ; need one. The APRS Mapping Application (BPQAPRS) sets a filter when it
                                    > > starts,
                                    > > ; and if you aren't running an APRS application, there isn't much point
                                    in
                                    > > getting info from APRS-IS
                                    > > ;
                                    > > ISFilter=m/50 ; Filter Command if needed
                                    > >
                                    > > ***
                                    > > ;
                                    > >
                                    > > The problem is it is not connecting to the aprs server. I have tried
                                    sever
                                    > > servers and I run the one I am trying to connect to and it is working.
                                    > > The second thing is the aprs pages I felt needed to be in a folder
                                    'aprs'
                                    > > but would not work page not found it appears anything in the root works
                                    > but
                                    > > not in a folder.
                                    > >
                                    > > do I have something wrong or am I missing something.
                                    > >
                                    > > Stephen
                                    > >
                                    >
                                  • K.O. Higgs
                                    I am running the same Windows system and am having the same problem. K.O. n0kfq ... -- K.O. Higgs n0kfq@centurytel.net
                                    Message 17 of 30 , Jun 11, 2012
                                      I am running the same Windows system and am having the same problem.

                                      K.O. n0kfq
                                      On 6/11/2012 10:16 AM, Mike Melnik wrote:
                                       

                                      Mike

                                      Send me your bpq32.cfg

                                      Mike-N9PMO
                                      www.n9pmo.com
                                      mmelnik1@...

                                      -----Original Message-----
                                      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                      Michael Mullikin
                                      Sent: Monday, June 11, 2012 8:53 AM
                                      To: BPQ32@yahoogroups.com
                                      Subject: RE: [BPQ32] Re: Problem BPQ 32 windows

                                       
                                      Hi John
                                      I seem to have a problem with BPQ32 Window.  I notice your picture of Bpq
                                      dll consol
                                      Shows a top line identifying the window.  When BPQ runs the only top line on
                                      the windows is the BPQ consol None of the other windows show the header
                                      line.  Also if I click the minimize button on the BPQ consol it disappears
                                      in to computer land.  I cant  find it and cant bring it back up.  I have to
                                      shut down the program and restart it to get it to come back.  I am using
                                      widows XP PRO service pack 3.  I  there a setting I need to adjust???
                                       
                                      Thank You 
                                      Mike  W8EHH

                                      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of John
                                      Wiseman
                                      Sent: Sunday, June 10, 2012 1:16 PM
                                      To: BPQ32@yahoogroups.com
                                      Subject: RE: [BPQ32] Re: Problem with APRS and Web Pages
                                       
                                       
                                      Stephen
                                       
                                      You should have something like
                                       

                                       
                                      If the Igate line isn’t there, then something very odd is going on – it
                                      suggests the APRS config was rejected, but it that case there should be
                                      error messages in the console window.
                                       
                                      Did you get “APRS Digi/Gateway Enabled” on the console window (after the
                                      “Initialising Port… “ messages)?
                                       
                                      73
                                      John
                                       

                                      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                      STEPHEN
                                      Sent: 10 June 2012 17:57
                                      To: BPQ32@yahoogroups.com
                                      Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                       
                                       
                                      John
                                      we are getting closer
                                      The aprs pages are working but I still will not connect to the APRS server
                                      You stated "Check that the "Enable Igate" checkbox on the bpq32.dll console
                                      window is checked."

                                      I don't see a Enable Igate on the bpq32.dll window?

                                      I also changed the server as Mike stated.

                                      Thanks

                                      --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
                                      >
                                      > Stephen,
                                      >
                                      >
                                      >
                                      > http://www.ve9sc.com:84/allrf.html isn't really working. The HTML is
                                      > returned, but the APRS data isn't being placed in the page. This suggests
                                      to
                                      > me that you have the APRS pages in BPQ32/HTML, not BPQ32/BPQAPRS/HTML.
                                      >
                                      >
                                      >
                                      > Check that the "Enable Igate" checkbox on the bpq32.dll console window is
                                      > checked. It should be set by default, but if it gets unset, the code won't
                                      > connect.
                                      >
                                      >
                                      >
                                      > I don't know why MailChat is giving a program error in Socket Data every
                                      10
                                      > minutes, but this isn't related to the Web Server - it is most likely the
                                      > POP3 server trying to retrieve a message, and being upset by what it gets.
                                      > The LOG_TCP.txt file may give a clue as to what is going on.
                                      >
                                      >
                                      >
                                      > 73,
                                      >
                                      > John
                                      >
                                      >
                                      >
                                      >
                                      >
                                      >
                                      >
                                      >
                                      >
                                      > _____
                                      >
                                      > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                      > STEPHEN
                                      > Sent: 10 June 2012 16:46
                                      > To: BPQ32@yahoogroups.com
                                      > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                      >
                                      >
                                      >
                                      >
                                      >
                                      > John
                                      >
                                      > I am running javAPRSSrvr 3.15b08 that should be fine.
                                      > http://www.ve9sc.com:14501/
                                      >
                                      > I know this works as i looked at Jerry's
                                      > http://w9bbs.no-ip.org:8080/ and it is working.
                                      >
                                      > I comment out FloodCalls, DigiCalls, and OBJECT statementsas you stated.
                                      >
                                      > Restarted BPQ and it still will not connect to the aprs server. I tried
                                      > other servers but they will not work either. I tried:
                                      >
                                      > The Main APRS servers "First" & "Second" etc.
                                      >
                                      > The console screen is fine no errors. It states :
                                      >
                                      > APRS/Digi/Gateway Enabled
                                      >
                                      > I have all the html file in the html folder no subfolders the link
                                      >
                                      > http://www.ve9sc.com:84/Node/Routes.html
                                      >
                                      > try the aprs link it will not work nor will that link "APRS" from any of
                                      the
                                      > node pages.
                                      >
                                      > But http://www.ve9sc.com:84/allrf.html works if appears the link is adding
                                      a
                                      > folder aprs.
                                      > http://www.ve9sc.com:84/aprs/all.html
                                      >
                                      > I looked at the debug log
                                      >
                                      > 120610 00:00:02 ! |Enter HouseKeeping
                                      > 120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 02:07:37 ! Too Many Program Errors - Closing
                                      > 120610 02:07:37 ! Attempting to Restart C:\Program
                                      > Files\BPQ32\BPQMailChat.exe
                                      > 120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to
                                      HouseKeeping
                                      > 78674
                                      > 120610 02:08:46 ! Program Starting
                                      > 120610 02:08:46 ! BPQMailChat Starting
                                      > 120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 06:23:18 ! Too Many Program Errors - Closing
                                      > 120610 06:23:18 ! Attempting to Restart C:\Program
                                      > Files\BPQ32\BPQMailChat.exe
                                      > 120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to
                                      HouseKeeping
                                      > 63324
                                      > 120610 06:24:36 ! Program Starting
                                      > 120610 06:24:36 ! BPQMailChat Starting
                                      > 120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 10:39:05 ! Too Many Program Errors - Closing
                                      > 120610 10:39:05 ! Attempting to Restart C:\Program
                                      > Files\BPQ32\BPQMailChat.exe
                                      > 120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to
                                      HouseKeeping
                                      > 47986
                                      > 120610 10:40:14 ! Program Starting
                                      > 120610 10:40:14 ! BPQMailChat Starting
                                      > 120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 14:54:44 ! Too Many Program Errors - Closing
                                      > 120610 14:54:44 ! Attempting to Restart C:\Program
                                      > Files\BPQ32\BPQMailChat.exe
                                      > 120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to
                                      HouseKeeping
                                      > 32644
                                      > 120610 14:55:56 ! Program Starting
                                      > 120610 14:55:56 ! BPQMailChat Starting
                                      > 120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      > 120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                      > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                      >
                                      > I am not sure where to go from here.
                                      >
                                      > Stephen
                                      >
                                      > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "John
                                      > Wiseman" <john.wiseman@> wrote:
                                      > >
                                      > > Stephen,
                                      > >
                                      > >
                                      > >
                                      > > You should probably comment out or change the FloodCalls, DigiCalls, and
                                      > > OBJECT statements.
                                      > >
                                      > >
                                      > >
                                      > > Usually the ISHOST is an APRS-IS server, but if the server you are
                                      running
                                      > > locally emulates an IS server, that should be ok. Do you get any error
                                      > > message on the console screen when you load bpa32?
                                      > >
                                      > >
                                      > >
                                      > > The APRS page templates should be directly in folder BPQAPRS/HTML - not
                                      a
                                      > > subfolder, under your BPQ32 config folder.
                                      > >
                                      > >
                                      > >
                                      > > 73,
                                      > >
                                      > > John
                                      > >
                                      > >
                                      > >
                                      > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                      > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                                      > Of
                                      > > STEPHEN
                                      > > Sent: 10 June 2012 15:52
                                      > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                      > > Subject: [BPQ32] Problem with APRS and Web Pages
                                      > >
                                      > >
                                      > >
                                      > >
                                      > >
                                      > > I did the last install all worked fine with the install. I added the
                                      html
                                      > > and aprs web pages. But the aprs seems to be not working.
                                      > >
                                      > > I added the following from example to the script:
                                      > >
                                      > > APRSDIGI
                                      > >
                                      > > APRSCall VE1MPF-10
                                      > > StatusMsg=BPQ32 IGate Moncton, New Brunswick, Canada
                                      > >
                                      > > Symbol=a ; Icon to display for station.
                                      > > Symset=B ; This is a "B" in a Red Diamond.
                                      > >
                                      > > ;
                                      > > ; Specify a Dest Addreess and Path for each port you want to use for
                                      APRS.
                                      > > No dest means receive only port
                                      > > ; Ports without an APRSPath statement will not be used by the Digi
                                      > > ;
                                      > > ; Note if you specify APRS as the destination call it will be replaced
                                      by
                                      > > the current BPQ32 APRS
                                      > > ; identification destination - APBPQ1. If you really want to send APRS,
                                      > > specify APRS-0.
                                      > >
                                      > > APRSPath 1= ; Receive only port
                                      > > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
                                      > > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
                                      > >
                                      > > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
                                      > > MobileBeaconInterval=2 ; Beacon interval when moving
                                      > >
                                      > > ; Define Crossport Digi. For each port, a list of ports to send a packet
                                      > to
                                      > > (IS means send to APRS-IS)
                                      > > ; If a Digimap isn't specified for a port, digi out on the port the
                                      packet
                                      > > arrived on,
                                      > > ; and send to APRS-IS (if enabled)
                                      > > ; If you want to digi on same port, but not send to APRS-IS, Specify
                                      > Digimap
                                      > > n=n
                                      > > ; If you dont want to digi on a port, specify Digimap n=
                                      > > ;
                                      > > ; If you only have one APRS port, you probably don't need a Digimap
                                      > > statement
                                      > >
                                      > > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
                                      > > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
                                      > > ;Digimap 9= ; Don't digi packets received on port 9
                                      > >
                                      > > ; Define Digipeating parameters
                                      > >
                                      > > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
                                      > > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
                                      > > DigiCalls=SKIG ; Calls for Normal (ie no SSID manipulation) Digi
                                      > > ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave out
                                      > > TraceCalls and FloodCalls
                                      > >
                                      > > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the
                                      > > call to be left as it is received.
                                      > >
                                      > > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is
                                      > > received with n greater than
                                      > > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is
                                      > decremented.
                                      > >
                                      > > ; Specify position. You can specify a fixed LAT/LONG, or use GPS
                                      > >
                                      > > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
                                      > > LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)
                                      > >
                                      > > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
                                      > > GPSSpeed=0 ; overriding the values set above.
                                      > >
                                      > > ; The Digi can generate Object and Item reports.
                                      > >
                                      > > ; The format is pretty strict - a single space between param=value
                                      pairs,
                                      > > ; a comma but no spaces in PATH and PORT string.
                                      > >
                                      > > ; Minimum interval is 10 mins. You can have as many OBJECT lines as you
                                      > > need.
                                      > > ; See thr APRS specification for information on how to format an Object
                                      or
                                      > > Item string.
                                      > >
                                      > > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
                                      > > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
                                      > >
                                      > > ; IGATE Params. If specified you will gate RF packets and your beacons
                                      to
                                      > > APRS-IS
                                      > >
                                      > > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an IPV6
                                      > Host
                                      > > ISPort=10152 ; Normal port for a filtered feed
                                      > > ISPasscode=17580 ; If you don't already have a passcode I can issue you
                                      > one.
                                      > > ;
                                      > > ; You can specify a filter command to be sent when you log on to
                                      APRS-IS.
                                      > > Normally you don't
                                      > > ; need one. The APRS Mapping Application (BPQAPRS) sets a filter when it
                                      > > starts,
                                      > > ; and if you aren't running an APRS application, there isn't much point
                                      in
                                      > > getting info from APRS-IS
                                      > > ;
                                      > > ISFilter=m/50 ; Filter Command if needed
                                      > >
                                      > > ***
                                      > > ;
                                      > >
                                      > > The problem is it is not connecting to the aprs server. I have tried
                                      sever
                                      > > servers and I run the one I am trying to connect to and it is working.
                                      > > The second thing is the aprs pages I felt needed to be in a folder
                                      'aprs'
                                      > > but would not work page not found it appears anything in the root works
                                      > but
                                      > > not in a folder.
                                      > >
                                      > > do I have something wrong or am I missing something.
                                      > >
                                      > > Stephen
                                      > >
                                      >


                                      -- 
                                      
                                      K.O. Higgs 
                                      n0kfq@...
                                      
                                      


                                    • Joel Yates
                                      Tell it to cascade the windows and then reposition them. ...73 s Joel N4JOA Sent via BlackBerry from T-Mobile ... From: K.O. Higgs
                                      Message 18 of 30 , Jun 11, 2012
                                        Tell it to cascade the windows and then reposition them.
                                        ...73's Joel N4JOA
                                        Sent via BlackBerry from T-Mobile

                                        From: "K.O. Higgs" <n0kfq@...>
                                        Sender: BPQ32@yahoogroups.com
                                        Date: Mon, 11 Jun 2012 10:33:31 -0500
                                        To: <BPQ32@yahoogroups.com>
                                        ReplyTo: BPQ32@yahoogroups.com
                                        Subject: Re: [BPQ32] Re: Problem BPQ 32 windows

                                        I am running the same Windows system and am having the same problem.

                                        K.O. n0kfq
                                        On 6/11/2012 10:16 AM, Mike Melnik wrote:
                                         

                                        Mike

                                        Send me your bpq32.cfg

                                        Mike-N9PMO
                                        www.n9pmo.com
                                        mmelnik1@...

                                        -----Original Message-----
                                        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                        Michael Mullikin
                                        Sent: Monday, June 11, 2012 8:53 AM
                                        To: BPQ32@yahoogroups.com
                                        Subject: RE: [BPQ32] Re: Problem BPQ 32 windows

                                         
                                        Hi John
                                        I seem to have a problem with BPQ32 Window.  I notice your picture of Bpq
                                        dll consol
                                        Shows a top line identifying the window.  When BPQ runs the only top line on
                                        the windows is the BPQ consol None of the other windows show the header
                                        line.  Also if I click the minimize button on the BPQ consol it disappears
                                        in to computer land.  I cant  find it and cant bring it back up.  I have to
                                        shut down the program and restart it to get it to come back.  I am using
                                        widows XP PRO service pack 3.  I  there a setting I need to adjust???
                                         
                                        Thank You 
                                        Mike  W8EHH

                                        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of John
                                        Wiseman
                                        Sent: Sunday, June 10, 2012 1:16 PM
                                        To: BPQ32@yahoogroups.com
                                        Subject: RE: [BPQ32] Re: Problem with APRS and Web Pages
                                         
                                         
                                        Stephen
                                         
                                        You should have something like
                                         

                                         
                                        If the Igate line isn’t there, then something very odd is going on – it
                                        suggests the APRS config was rejected, but it that case there should be
                                        error messages in the console window.
                                         
                                        Did you get “APRS Digi/Gateway Enabled” on the console window (after the
                                        “Initialising Port… “ messages)?
                                         
                                        73
                                        John
                                         

                                        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                        STEPHEN
                                        Sent: 10 June 2012 17:57
                                        To: BPQ32@yahoogroups.com
                                        Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                         
                                         
                                        John
                                        we are getting closer
                                        The aprs pages are working but I still will not connect to the APRS server
                                        You stated "Check that the "Enable Igate" checkbox on the bpq32.dll console
                                        window is checked."

                                        I don't see a Enable Igate on the bpq32.dll window?

                                        I also changed the server as Mike stated.

                                        Thanks

                                        --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
                                        >
                                        > Stephen,
                                        >
                                        >
                                        >
                                        > http://www.ve9sc.com:84/allrf.html isn't really working. The HTML is
                                        > returned, but the APRS data isn't being placed in the page. This suggests
                                        to
                                        > me that you have the APRS pages in BPQ32/HTML, not BPQ32/BPQAPRS/HTML.
                                        >
                                        >
                                        >
                                        > Check that the "Enable Igate" checkbox on the bpq32.dll console window is
                                        > checked. It should be set by default, but if it gets unset, the code won't
                                        > connect.
                                        >
                                        >
                                        >
                                        > I don't know why MailChat is giving a program error in Socket Data every
                                        10
                                        > minutes, but this isn't related to the Web Server - it is most likely the
                                        > POP3 server trying to retrieve a message, and being upset by what it gets.
                                        > The LOG_TCP.txt file may give a clue as to what is going on.
                                        >
                                        >
                                        >
                                        > 73,
                                        >
                                        > John
                                        >
                                        >
                                        >
                                        >
                                        >
                                        >
                                        >
                                        >
                                        >
                                        > _____
                                        >
                                        > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                        > STEPHEN
                                        > Sent: 10 June 2012 16:46
                                        > To: BPQ32@yahoogroups.com
                                        > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                        >
                                        >
                                        >
                                        >
                                        >
                                        > John
                                        >
                                        > I am running javAPRSSrvr 3.15b08 that should be fine.
                                        > http://www.ve9sc.com:14501/
                                        >
                                        > I know this works as i looked at Jerry's
                                        > http://w9bbs.no-ip.org:8080/ and it is working.
                                        >
                                        > I comment out FloodCalls, DigiCalls, and OBJECT statementsas you stated.
                                        >
                                        > Restarted BPQ and it still will not connect to the aprs server. I tried
                                        > other servers but they will not work either. I tried:
                                        >
                                        > The Main APRS servers "First" & "Second" etc.
                                        >
                                        > The console screen is fine no errors. It states :
                                        >
                                        > APRS/Digi/Gateway Enabled
                                        >
                                        > I have all the html file in the html folder no subfolders the link
                                        >
                                        > http://www.ve9sc.com:84/Node/Routes.html
                                        >
                                        > try the aprs link it will not work nor will that link "APRS" from any of
                                        the
                                        > node pages.
                                        >
                                        > But http://www.ve9sc.com:84/allrf.html works if appears the link is adding
                                        a
                                        > folder aprs.
                                        > http://www.ve9sc.com:84/aprs/all.html
                                        >
                                        > I looked at the debug log
                                        >
                                        > 120610 00:00:02 ! |Enter HouseKeeping
                                        > 120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 02:07:37 ! Too Many Program Errors - Closing
                                        > 120610 02:07:37 ! Attempting to Restart C:\Program
                                        > Files\BPQ32\BPQMailChat.exe
                                        > 120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to
                                        HouseKeeping
                                        > 78674
                                        > 120610 02:08:46 ! Program Starting
                                        > 120610 02:08:46 ! BPQMailChat Starting
                                        > 120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 06:23:18 ! Too Many Program Errors - Closing
                                        > 120610 06:23:18 ! Attempting to Restart C:\Program
                                        > Files\BPQ32\BPQMailChat.exe
                                        > 120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to
                                        HouseKeeping
                                        > 63324
                                        > 120610 06:24:36 ! Program Starting
                                        > 120610 06:24:36 ! BPQMailChat Starting
                                        > 120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 10:39:05 ! Too Many Program Errors - Closing
                                        > 120610 10:39:05 ! Attempting to Restart C:\Program
                                        > Files\BPQ32\BPQMailChat.exe
                                        > 120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to
                                        HouseKeeping
                                        > 47986
                                        > 120610 10:40:14 ! Program Starting
                                        > 120610 10:40:14 ! BPQMailChat Starting
                                        > 120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 14:54:44 ! Too Many Program Errors - Closing
                                        > 120610 14:54:44 ! Attempting to Restart C:\Program
                                        > Files\BPQ32\BPQMailChat.exe
                                        > 120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to
                                        HouseKeeping
                                        > 32644
                                        > 120610 14:55:56 ! Program Starting
                                        > 120610 14:55:56 ! BPQMailChat Starting
                                        > 120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        > 120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                        > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                        >
                                        > I am not sure where to go from here.
                                        >
                                        > Stephen
                                        >
                                        > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "John
                                        > Wiseman" <john.wiseman@> wrote:
                                        > >
                                        > > Stephen,
                                        > >
                                        > >
                                        > >
                                        > > You should probably comment out or change the FloodCalls, DigiCalls, and
                                        > > OBJECT statements.
                                        > >
                                        > >
                                        > >
                                        > > Usually the ISHOST is an APRS-IS server, but if the server you are
                                        running
                                        > > locally emulates an IS server, that should be ok. Do you get any error
                                        > > message on the console screen when you load bpa32?
                                        > >
                                        > >
                                        > >
                                        > > The APRS page templates should be directly in folder BPQAPRS/HTML - not
                                        a
                                        > > subfolder, under your BPQ32 config folder.
                                        > >
                                        > >
                                        > >
                                        > > 73,
                                        > >
                                        > > John
                                        > >
                                        > >
                                        > >
                                        > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                        > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                                        > Of
                                        > > STEPHEN
                                        > > Sent: 10 June 2012 15:52
                                        > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                        > > Subject: [BPQ32] Problem with APRS and Web Pages
                                        > >
                                        > >
                                        > >
                                        > >
                                        > >
                                        > > I did the last install all worked fine with the install. I added the
                                        html
                                        > > and aprs web pages. But the aprs seems to be not working.
                                        > >
                                        > > I added the following from example to the script:
                                        > >
                                        > > APRSDIGI
                                        > >
                                        > > APRSCall VE1MPF-10
                                        > > StatusMsg=BPQ32 IGate Moncton, New Brunswick, Canada
                                        > >
                                        > > Symbol=a ; Icon to display for station.
                                        > > Symset=B ; This is a "B" in a Red Diamond.
                                        > >
                                        > > ;
                                        > > ; Specify a Dest Addreess and Path for each port you want to use for
                                        APRS.
                                        > > No dest means receive only port
                                        > > ; Ports without an APRSPath statement will not be used by the Digi
                                        > > ;
                                        > > ; Note if you specify APRS as the destination call it will be replaced
                                        by
                                        > > the current BPQ32 APRS
                                        > > ; identification destination - APBPQ1. If you really want to send APRS,
                                        > > specify APRS-0.
                                        > >
                                        > > APRSPath 1= ; Receive only port
                                        > > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
                                        > > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
                                        > >
                                        > > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
                                        > > MobileBeaconInterval=2 ; Beacon interval when moving
                                        > >
                                        > > ; Define Crossport Digi. For each port, a list of ports to send a packet
                                        > to
                                        > > (IS means send to APRS-IS)
                                        > > ; If a Digimap isn't specified for a port, digi out on the port the
                                        packet
                                        > > arrived on,
                                        > > ; and send to APRS-IS (if enabled)
                                        > > ; If you want to digi on same port, but not send to APRS-IS, Specify
                                        > Digimap
                                        > > n=n
                                        > > ; If you dont want to digi on a port, specify Digimap n=
                                        > > ;
                                        > > ; If you only have one APRS port, you probably don't need a Digimap
                                        > > statement
                                        > >
                                        > > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
                                        > > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
                                        > > ;Digimap 9= ; Don't digi packets received on port 9
                                        > >
                                        > > ; Define Digipeating parameters
                                        > >
                                        > > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
                                        > > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
                                        > > DigiCalls=SKIG ; Calls for Normal (ie no SSID manipulation) Digi
                                        > > ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave out
                                        > > TraceCalls and FloodCalls
                                        > >
                                        > > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the
                                        > > call to be left as it is received.
                                        > >
                                        > > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is
                                        > > received with n greater than
                                        > > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is
                                        > decremented.
                                        > >
                                        > > ; Specify position. You can specify a fixed LAT/LONG, or use GPS
                                        > >
                                        > > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
                                        > > LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)
                                        > >
                                        > > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
                                        > > GPSSpeed=0 ; overriding the values set above.
                                        > >
                                        > > ; The Digi can generate Object and Item reports.
                                        > >
                                        > > ; The format is pretty strict - a single space between param=value
                                        pairs,
                                        > > ; a comma but no spaces in PATH and PORT string.
                                        > >
                                        > > ; Minimum interval is 10 mins. You can have as many OBJECT lines as you
                                        > > need.
                                        > > ; See thr APRS specification for information on how to format an Object
                                        or
                                        > > Item string.
                                        > >
                                        > > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
                                        > > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
                                        > >
                                        > > ; IGATE Params. If specified you will gate RF packets and your beacons
                                        to
                                        > > APRS-IS
                                        > >
                                        > > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an IPV6
                                        > Host
                                        > > ISPort=10152 ; Normal port for a filtered feed
                                        > > ISPasscode=17580 ; If you don't already have a passcode I can issue you
                                        > one.
                                        > > ;
                                        > > ; You can specify a filter command to be sent when you log on to
                                        APRS-IS.
                                        > > Normally you don't
                                        > > ; need one. The APRS Mapping Application (BPQAPRS) sets a filter when it
                                        > > starts,
                                        > > ; and if you aren't running an APRS application, there isn't much point
                                        in
                                        > > getting info from APRS-IS
                                        > > ;
                                        > > ISFilter=m/50 ; Filter Command if needed
                                        > >
                                        > > ***
                                        > > ;
                                        > >
                                        > > The problem is it is not connecting to the aprs server. I have tried
                                        sever
                                        > > servers and I run the one I am trying to connect to and it is working.
                                        > > The second thing is the aprs pages I felt needed to be in a folder
                                        'aprs'
                                        > > but would not work page not found it appears anything in the root works
                                        > but
                                        > > not in a folder.
                                        > >
                                        > > do I have something wrong or am I missing something.
                                        > >
                                        > > Stephen
                                        > >
                                        >


                                        -- 
                                        
                                        K.O. Higgs 
                                        n0kfq@...
                                        
                                        


                                      • K.O. Higgs
                                        Will try that... but don t see how that will fix the problem about having to re-boot the computer when BPQ fails.. K.O. ... -- K.O. Higgs n0kfq@centurytel.net
                                        Message 19 of 30 , Jun 11, 2012
                                          Will try that... but don't see how that will fix the problem about having to re-boot the
                                          computer when BPQ fails..

                                          K.O.
                                          On 6/11/2012 10:44 AM, Joel Yates wrote:
                                           

                                          Tell it to cascade the windows and then reposition them.
                                          ...73's Joel N4JOA

                                          Sent via BlackBerry from T-Mobile

                                          From: "K.O. Higgs" <n0kfq@...>
                                          Date: Mon, 11 Jun 2012 10:33:31 -0500
                                          Subject: Re: [BPQ32] Re: Problem BPQ 32 windows

                                          I am running the same Windows system and am having the same problem.

                                          K.O. n0kfq
                                          On 6/11/2012 10:16 AM, Mike Melnik wrote:
                                           

                                          Mike

                                          Send me your bpq32.cfg

                                          Mike-N9PMO
                                          www.n9pmo.com
                                          mmelnik1@...

                                          -----Original Message-----
                                          From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                          Michael Mullikin
                                          Sent: Monday, June 11, 2012 8:53 AM
                                          To: BPQ32@yahoogroups.com
                                          Subject: RE: [BPQ32] Re: Problem BPQ 32 windows

                                           
                                          Hi John
                                          I seem to have a problem with BPQ32 Window.  I notice your picture of Bpq
                                          dll consol
                                          Shows a top line identifying the window.  When BPQ runs the only top line on
                                          the windows is the BPQ consol None of the other windows show the header
                                          line.  Also if I click the minimize button on the BPQ consol it disappears
                                          in to computer land.  I cant  find it and cant bring it back up.  I have to
                                          shut down the program and restart it to get it to come back.  I am using
                                          widows XP PRO service pack 3.  I  there a setting I need to adjust???
                                           
                                          Thank You 
                                          Mike  W8EHH

                                          From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of John
                                          Wiseman
                                          Sent: Sunday, June 10, 2012 1:16 PM
                                          To: BPQ32@yahoogroups.com
                                          Subject: RE: [BPQ32] Re: Problem with APRS and Web Pages
                                           
                                           
                                          Stephen
                                           
                                          You should have something like
                                           

                                           
                                          If the Igate line isn’t there, then something very odd is going on – it
                                          suggests the APRS config was rejected, but it that case there should be
                                          error messages in the console window.
                                           
                                          Did you get “APRS Digi/Gateway Enabled” on the console window (after the
                                          “Initialising Port… “ messages)?
                                           
                                          73
                                          John
                                           

                                          From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                          STEPHEN
                                          Sent: 10 June 2012 17:57
                                          To: BPQ32@yahoogroups.com
                                          Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                           
                                           
                                          John
                                          we are getting closer
                                          The aprs pages are working but I still will not connect to the APRS server
                                          You stated "Check that the "Enable Igate" checkbox on the bpq32.dll console
                                          window is checked."

                                          I don't see a Enable Igate on the bpq32.dll window?

                                          I also changed the server as Mike stated.

                                          Thanks

                                          --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
                                          >
                                          > Stephen,
                                          >
                                          >
                                          >
                                          > http://www.ve9sc.com:84/allrf.html isn't really working. The HTML is
                                          > returned, but the APRS data isn't being placed in the page. This suggests
                                          to
                                          > me that you have the APRS pages in BPQ32/HTML, not BPQ32/BPQAPRS/HTML.
                                          >
                                          >
                                          >
                                          > Check that the "Enable Igate" checkbox on the bpq32.dll console window is
                                          > checked. It should be set by default, but if it gets unset, the code won't
                                          > connect.
                                          >
                                          >
                                          >
                                          > I don't know why MailChat is giving a program error in Socket Data every
                                          10
                                          > minutes, but this isn't related to the Web Server - it is most likely the
                                          > POP3 server trying to retrieve a message, and being upset by what it gets.
                                          > The LOG_TCP.txt file may give a clue as to what is going on.
                                          >
                                          >
                                          >
                                          > 73,
                                          >
                                          > John
                                          >
                                          >
                                          >
                                          >
                                          >
                                          >
                                          >
                                          >
                                          >
                                          > _____
                                          >
                                          > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                          > STEPHEN
                                          > Sent: 10 June 2012 16:46
                                          > To: BPQ32@yahoogroups.com
                                          > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                          >
                                          >
                                          >
                                          >
                                          >
                                          > John
                                          >
                                          > I am running javAPRSSrvr 3.15b08 that should be fine.
                                          > http://www.ve9sc.com:14501/
                                          >
                                          > I know this works as i looked at Jerry's
                                          > http://w9bbs.no-ip.org:8080/ and it is working.
                                          >
                                          > I comment out FloodCalls, DigiCalls, and OBJECT statementsas you stated.
                                          >
                                          > Restarted BPQ and it still will not connect to the aprs server. I tried
                                          > other servers but they will not work either. I tried:
                                          >
                                          > The Main APRS servers "First" & "Second" etc.
                                          >
                                          > The console screen is fine no errors. It states :
                                          >
                                          > APRS/Digi/Gateway Enabled
                                          >
                                          > I have all the html file in the html folder no subfolders the link
                                          >
                                          > http://www.ve9sc.com:84/Node/Routes.html
                                          >
                                          > try the aprs link it will not work nor will that link "APRS" from any of
                                          the
                                          > node pages.
                                          >
                                          > But http://www.ve9sc.com:84/allrf.html works if appears the link is adding
                                          a
                                          > folder aprs.
                                          > http://www.ve9sc.com:84/aprs/all.html
                                          >
                                          > I looked at the debug log
                                          >
                                          > 120610 00:00:02 ! |Enter HouseKeeping
                                          > 120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 02:07:37 ! Too Many Program Errors - Closing
                                          > 120610 02:07:37 ! Attempting to Restart C:\Program
                                          > Files\BPQ32\BPQMailChat.exe
                                          > 120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to
                                          HouseKeeping
                                          > 78674
                                          > 120610 02:08:46 ! Program Starting
                                          > 120610 02:08:46 ! BPQMailChat Starting
                                          > 120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 06:23:18 ! Too Many Program Errors - Closing
                                          > 120610 06:23:18 ! Attempting to Restart C:\Program
                                          > Files\BPQ32\BPQMailChat.exe
                                          > 120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to
                                          HouseKeeping
                                          > 63324
                                          > 120610 06:24:36 ! Program Starting
                                          > 120610 06:24:36 ! BPQMailChat Starting
                                          > 120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 10:39:05 ! Too Many Program Errors - Closing
                                          > 120610 10:39:05 ! Attempting to Restart C:\Program
                                          > Files\BPQ32\BPQMailChat.exe
                                          > 120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to
                                          HouseKeeping
                                          > 47986
                                          > 120610 10:40:14 ! Program Starting
                                          > 120610 10:40:14 ! BPQMailChat Starting
                                          > 120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 14:54:44 ! Too Many Program Errors - Closing
                                          > 120610 14:54:44 ! Attempting to Restart C:\Program
                                          > Files\BPQ32\BPQMailChat.exe
                                          > 120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to
                                          HouseKeeping
                                          > 32644
                                          > 120610 14:55:56 ! Program Starting
                                          > 120610 14:55:56 ! BPQMailChat Starting
                                          > 120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          >
                                          > I am not sure where to go from here.
                                          >
                                          > Stephen
                                          >
                                          > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "John
                                          > Wiseman" <john.wiseman@> wrote:
                                          > >
                                          > > Stephen,
                                          > >
                                          > >
                                          > >
                                          > > You should probably comment out or change the FloodCalls, DigiCalls, and
                                          > > OBJECT statements.
                                          > >
                                          > >
                                          > >
                                          > > Usually the ISHOST is an APRS-IS server, but if the server you are
                                          running
                                          > > locally emulates an IS server, that should be ok. Do you get any error
                                          > > message on the console screen when you load bpa32?
                                          > >
                                          > >
                                          > >
                                          > > The APRS page templates should be directly in folder BPQAPRS/HTML - not
                                          a
                                          > > subfolder, under your BPQ32 config folder.
                                          > >
                                          > >
                                          > >
                                          > > 73,
                                          > >
                                          > > John
                                          > >
                                          > >
                                          > >
                                          > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                          > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                                          > Of
                                          > > STEPHEN
                                          > > Sent: 10 June 2012 15:52
                                          > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                          > > Subject: [BPQ32] Problem with APRS and Web Pages
                                          > >
                                          > >
                                          > >
                                          > >
                                          > >
                                          > > I did the last install all worked fine with the install. I added the
                                          html
                                          > > and aprs web pages. But the aprs seems to be not working.
                                          > >
                                          > > I added the following from example to the script:
                                          > >
                                          > > APRSDIGI
                                          > >
                                          > > APRSCall VE1MPF-10
                                          > > StatusMsg=BPQ32 IGate Moncton, New Brunswick, Canada
                                          > >
                                          > > Symbol=a ; Icon to display for station.
                                          > > Symset=B ; This is a "B" in a Red Diamond.
                                          > >
                                          > > ;
                                          > > ; Specify a Dest Addreess and Path for each port you want to use for
                                          APRS.
                                          > > No dest means receive only port
                                          > > ; Ports without an APRSPath statement will not be used by the Digi
                                          > > ;
                                          > > ; Note if you specify APRS as the destination call it will be replaced
                                          by
                                          > > the current BPQ32 APRS
                                          > > ; identification destination - APBPQ1. If you really want to send APRS,
                                          > > specify APRS-0.
                                          > >
                                          > > APRSPath 1= ; Receive only port
                                          > > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
                                          > > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
                                          > >
                                          > > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
                                          > > MobileBeaconInterval=2 ; Beacon interval when moving
                                          > >
                                          > > ; Define Crossport Digi. For each port, a list of ports to send a packet
                                          > to
                                          > > (IS means send to APRS-IS)
                                          > > ; If a Digimap isn't specified for a port, digi out on the port the
                                          packet
                                          > > arrived on,
                                          > > ; and send to APRS-IS (if enabled)
                                          > > ; If you want to digi on same port, but not send to APRS-IS, Specify
                                          > Digimap
                                          > > n=n
                                          > > ; If you dont want to digi on a port, specify Digimap n=
                                          > > ;
                                          > > ; If you only have one APRS port, you probably don't need a Digimap
                                          > > statement
                                          > >
                                          > > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
                                          > > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
                                          > > ;Digimap 9= ; Don't digi packets received on port 9
                                          > >
                                          > > ; Define Digipeating parameters
                                          > >
                                          > > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
                                          > > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
                                          > > DigiCalls=SKIG ; Calls for Normal (ie no SSID manipulation) Digi
                                          > > ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave out
                                          > > TraceCalls and FloodCalls
                                          > >
                                          > > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the
                                          > > call to be left as it is received.
                                          > >
                                          > > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is
                                          > > received with n greater than
                                          > > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is
                                          > decremented.
                                          > >
                                          > > ; Specify position. You can specify a fixed LAT/LONG, or use GPS
                                          > >
                                          > > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
                                          > > LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)
                                          > >
                                          > > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
                                          > > GPSSpeed=0 ; overriding the values set above.
                                          > >
                                          > > ; The Digi can generate Object and Item reports.
                                          > >
                                          > > ; The format is pretty strict - a single space between param=value
                                          pairs,
                                          > > ; a comma but no spaces in PATH and PORT string.
                                          > >
                                          > > ; Minimum interval is 10 mins. You can have as many OBJECT lines as you
                                          > > need.
                                          > > ; See thr APRS specification for information on how to format an Object
                                          or
                                          > > Item string.
                                          > >
                                          > > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
                                          > > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
                                          > >
                                          > > ; IGATE Params. If specified you will gate RF packets and your beacons
                                          to
                                          > > APRS-IS
                                          > >
                                          > > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an IPV6
                                          > Host
                                          > > ISPort=10152 ; Normal port for a filtered feed
                                          > > ISPasscode=17580 ; If you don't already have a passcode I can issue you
                                          > one.
                                          > > ;
                                          > > ; You can specify a filter command to be sent when you log on to
                                          APRS-IS.
                                          > > Normally you don't
                                          > > ; need one. The APRS Mapping Application (BPQAPRS) sets a filter when it
                                          > > starts,
                                          > > ; and if you aren't running an APRS application, there isn't much point
                                          in
                                          > > getting info from APRS-IS
                                          > > ;
                                          > > ISFilter=m/50 ; Filter Command if needed
                                          > >
                                          > > ***
                                          > > ;
                                          > >
                                          > > The problem is it is not connecting to the aprs server. I have tried
                                          sever
                                          > > servers and I run the one I am trying to connect to and it is working.
                                          > > The second thing is the aprs pages I felt needed to be in a folder
                                          'aprs'
                                          > > but would not work page not found it appears anything in the root works
                                          > but
                                          > > not in a folder.
                                          > >
                                          > > do I have something wrong or am I missing something.
                                          > >
                                          > > Stephen
                                          > >
                                          >


                                          -- 
                                          
                                          K.O. Higgs 
                                          n0kfq@...
                                          
                                          



                                          -- 
                                          
                                          K.O. Higgs 
                                          n0kfq@...
                                          
                                          


                                      • Joel Yates
                                        That was in response to the header line problem...73 s Joel N4JOA Sent via BlackBerry from T-Mobile ... From: K.O. Higgs Sender:
                                        Message 20 of 30 , Jun 11, 2012
                                          That was in response to the header line problem...73's Joel N4JOA
                                          Sent via BlackBerry from T-Mobile

                                          From: "K.O. Higgs" <n0kfq@...>
                                          Sender: BPQ32@yahoogroups.com
                                          Date: Mon, 11 Jun 2012 10:48:37 -0500
                                          To: <BPQ32@yahoogroups.com>
                                          ReplyTo: BPQ32@yahoogroups.com
                                          Subject: Re: [BPQ32] Re: Problem BPQ 32 windows

                                          Will try that... but don't see how that will fix the problem about having to re-boot the
                                          computer when BPQ fails..

                                          K.O.
                                          On 6/11/2012 10:44 AM, Joel Yates wrote:
                                           

                                          Tell it to cascade the windows and then reposition them.
                                          ...73's Joel N4JOA

                                          Sent via BlackBerry from T-Mobile

                                          From: "K.O. Higgs" <n0kfq@...>
                                          Date: Mon, 11 Jun 2012 10:33:31 -0500
                                          Subject: Re: [BPQ32] Re: Problem BPQ 32 windows

                                          I am running the same Windows system and am having the same problem.

                                          K.O. n0kfq
                                          On 6/11/2012 10:16 AM, Mike Melnik wrote:
                                           

                                          Mike

                                          Send me your bpq32.cfg

                                          Mike-N9PMO
                                          www.n9pmo.com
                                          mmelnik1@...

                                          -----Original Message-----
                                          From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                          Michael Mullikin
                                          Sent: Monday, June 11, 2012 8:53 AM
                                          To: BPQ32@yahoogroups.com
                                          Subject: RE: [BPQ32] Re: Problem BPQ 32 windows

                                           
                                          Hi John
                                          I seem to have a problem with BPQ32 Window.  I notice your picture of Bpq
                                          dll consol
                                          Shows a top line identifying the window.  When BPQ runs the only top line on
                                          the windows is the BPQ consol None of the other windows show the header
                                          line.  Also if I click the minimize button on the BPQ consol it disappears
                                          in to computer land.  I cant  find it and cant bring it back up.  I have to
                                          shut down the program and restart it to get it to come back.  I am using
                                          widows XP PRO service pack 3.  I  there a setting I need to adjust???
                                           
                                          Thank You 
                                          Mike  W8EHH

                                          From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of John
                                          Wiseman
                                          Sent: Sunday, June 10, 2012 1:16 PM
                                          To: BPQ32@yahoogroups.com
                                          Subject: RE: [BPQ32] Re: Problem with APRS and Web Pages
                                           
                                           
                                          Stephen
                                           
                                          You should have something like
                                           

                                           
                                          If the Igate line isn’t there, then something very odd is going on – it
                                          suggests the APRS config was rejected, but it that case there should be
                                          error messages in the console window.
                                           
                                          Did you get “APRS Digi/Gateway Enabled” on the console window (after the
                                          “Initialising Port… “ messages)?
                                           
                                          73
                                          John
                                           

                                          From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                          STEPHEN
                                          Sent: 10 June 2012 17:57
                                          To: BPQ32@yahoogroups.com
                                          Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                           
                                           
                                          John
                                          we are getting closer
                                          The aprs pages are working but I still will not connect to the APRS server
                                          You stated "Check that the "Enable Igate" checkbox on the bpq32.dll console
                                          window is checked."

                                          I don't see a Enable Igate on the bpq32.dll window?

                                          I also changed the server as Mike stated.

                                          Thanks

                                          --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
                                          >
                                          > Stephen,
                                          >
                                          >
                                          >
                                          > http://www.ve9sc.com:84/allrf.html isn't really working. The HTML is
                                          > returned, but the APRS data isn't being placed in the page. This suggests
                                          to
                                          > me that you have the APRS pages in BPQ32/HTML, not BPQ32/BPQAPRS/HTML.
                                          >
                                          >
                                          >
                                          > Check that the "Enable Igate" checkbox on the bpq32.dll console window is
                                          > checked. It should be set by default, but if it gets unset, the code won't
                                          > connect.
                                          >
                                          >
                                          >
                                          > I don't know why MailChat is giving a program error in Socket Data every
                                          10
                                          > minutes, but this isn't related to the Web Server - it is most likely the
                                          > POP3 server trying to retrieve a message, and being upset by what it gets.
                                          > The LOG_TCP.txt file may give a clue as to what is going on.
                                          >
                                          >
                                          >
                                          > 73,
                                          >
                                          > John
                                          >
                                          >
                                          >
                                          >
                                          >
                                          >
                                          >
                                          >
                                          >
                                          > _____
                                          >
                                          > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                          > STEPHEN
                                          > Sent: 10 June 2012 16:46
                                          > To: BPQ32@yahoogroups.com
                                          > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                          >
                                          >
                                          >
                                          >
                                          >
                                          > John
                                          >
                                          > I am running javAPRSSrvr 3.15b08 that should be fine.
                                          > http://www.ve9sc.com:14501/
                                          >
                                          > I know this works as i looked at Jerry's
                                          > http://w9bbs.no-ip.org:8080/ and it is working.
                                          >
                                          > I comment out FloodCalls, DigiCalls, and OBJECT statementsas you stated.
                                          >
                                          > Restarted BPQ and it still will not connect to the aprs server. I tried
                                          > other servers but they will not work either. I tried:
                                          >
                                          > The Main APRS servers "First" & "Second" etc.
                                          >
                                          > The console screen is fine no errors. It states :
                                          >
                                          > APRS/Digi/Gateway Enabled
                                          >
                                          > I have all the html file in the html folder no subfolders the link
                                          >
                                          > http://www.ve9sc.com:84/Node/Routes.html
                                          >
                                          > try the aprs link it will not work nor will that link "APRS" from any of
                                          the
                                          > node pages.
                                          >
                                          > But http://www.ve9sc.com:84/allrf.html works if appears the link is adding
                                          a
                                          > folder aprs.
                                          > http://www.ve9sc.com:84/aprs/all.html
                                          >
                                          > I looked at the debug log
                                          >
                                          > 120610 00:00:02 ! |Enter HouseKeeping
                                          > 120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 02:07:37 ! Too Many Program Errors - Closing
                                          > 120610 02:07:37 ! Attempting to Restart C:\Program
                                          > Files\BPQ32\BPQMailChat.exe
                                          > 120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to
                                          HouseKeeping
                                          > 78674
                                          > 120610 02:08:46 ! Program Starting
                                          > 120610 02:08:46 ! BPQMailChat Starting
                                          > 120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 06:23:18 ! Too Many Program Errors - Closing
                                          > 120610 06:23:18 ! Attempting to Restart C:\Program
                                          > Files\BPQ32\BPQMailChat.exe
                                          > 120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to
                                          HouseKeeping
                                          > 63324
                                          > 120610 06:24:36 ! Program Starting
                                          > 120610 06:24:36 ! BPQMailChat Starting
                                          > 120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 10:39:05 ! Too Many Program Errors - Closing
                                          > 120610 10:39:05 ! Attempting to Restart C:\Program
                                          > Files\BPQ32\BPQMailChat.exe
                                          > 120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to
                                          HouseKeeping
                                          > 47986
                                          > 120610 10:40:14 ! Program Starting
                                          > 120610 10:40:14 ! BPQMailChat Starting
                                          > 120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 14:54:44 ! Too Many Program Errors - Closing
                                          > 120610 14:54:44 ! Attempting to Restart C:\Program
                                          > Files\BPQ32\BPQMailChat.exe
                                          > 120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to
                                          HouseKeeping
                                          > 32644
                                          > 120610 14:55:56 ! Program Starting
                                          > 120610 14:55:56 ! BPQMailChat Starting
                                          > 120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          > 120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                          >
                                          > I am not sure where to go from here.
                                          >
                                          > Stephen
                                          >
                                          > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "John
                                          > Wiseman" <john.wiseman@> wrote:
                                          > >
                                          > > Stephen,
                                          > >
                                          > >
                                          > >
                                          > > You should probably comment out or change the FloodCalls, DigiCalls, and
                                          > > OBJECT statements.
                                          > >
                                          > >
                                          > >
                                          > > Usually the ISHOST is an APRS-IS server, but if the server you are
                                          running
                                          > > locally emulates an IS server, that should be ok. Do you get any error
                                          > > message on the console screen when you load bpa32?
                                          > >
                                          > >
                                          > >
                                          > > The APRS page templates should be directly in folder BPQAPRS/HTML - not
                                          a
                                          > > subfolder, under your BPQ32 config folder.
                                          > >
                                          > >
                                          > >
                                          > > 73,
                                          > >
                                          > > John
                                          > >
                                          > >
                                          > >
                                          > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                          > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                                          > Of
                                          > > STEPHEN
                                          > > Sent: 10 June 2012 15:52
                                          > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                          > > Subject: [BPQ32] Problem with APRS and Web Pages
                                          > >
                                          > >
                                          > >
                                          > >
                                          > >
                                          > > I did the last install all worked fine with the install. I added the
                                          html
                                          > > and aprs web pages. But the aprs seems to be not working.
                                          > >
                                          > > I added the following from example to the script:
                                          > >
                                          > > APRSDIGI
                                          > >
                                          > > APRSCall VE1MPF-10
                                          > > StatusMsg=BPQ32 IGate Moncton, New Brunswick, Canada
                                          > >
                                          > > Symbol=a ; Icon to display for station.
                                          > > Symset=B ; This is a "B" in a Red Diamond.
                                          > >
                                          > > ;
                                          > > ; Specify a Dest Addreess and Path for each port you want to use for
                                          APRS.
                                          > > No dest means receive only port
                                          > > ; Ports without an APRSPath statement will not be used by the Digi
                                          > > ;
                                          > > ; Note if you specify APRS as the destination call it will be replaced
                                          by
                                          > > the current BPQ32 APRS
                                          > > ; identification destination - APBPQ1. If you really want to send APRS,
                                          > > specify APRS-0.
                                          > >
                                          > > APRSPath 1= ; Receive only port
                                          > > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
                                          > > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
                                          > >
                                          > > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
                                          > > MobileBeaconInterval=2 ; Beacon interval when moving
                                          > >
                                          > > ; Define Crossport Digi. For each port, a list of ports to send a packet
                                          > to
                                          > > (IS means send to APRS-IS)
                                          > > ; If a Digimap isn't specified for a port, digi out on the port the
                                          packet
                                          > > arrived on,
                                          > > ; and send to APRS-IS (if enabled)
                                          > > ; If you want to digi on same port, but not send to APRS-IS, Specify
                                          > Digimap
                                          > > n=n
                                          > > ; If you dont want to digi on a port, specify Digimap n=
                                          > > ;
                                          > > ; If you only have one APRS port, you probably don't need a Digimap
                                          > > statement
                                          > >
                                          > > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
                                          > > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
                                          > > ;Digimap 9= ; Don't digi packets received on port 9
                                          > >
                                          > > ; Define Digipeating parameters
                                          > >
                                          > > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
                                          > > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
                                          > > DigiCalls=SKIG ; Calls for Normal (ie no SSID manipulation) Digi
                                          > > ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave out
                                          > > TraceCalls and FloodCalls
                                          > >
                                          > > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the
                                          > > call to be left as it is received.
                                          > >
                                          > > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is
                                          > > received with n greater than
                                          > > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is
                                          > decremented.
                                          > >
                                          > > ; Specify position. You can specify a fixed LAT/LONG, or use GPS
                                          > >
                                          > > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
                                          > > LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)
                                          > >
                                          > > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
                                          > > GPSSpeed=0 ; overriding the values set above.
                                          > >
                                          > > ; The Digi can generate Object and Item reports.
                                          > >
                                          > > ; The format is pretty strict - a single space between param=value
                                          pairs,
                                          > > ; a comma but no spaces in PATH and PORT string.
                                          > >
                                          > > ; Minimum interval is 10 mins. You can have as many OBJECT lines as you
                                          > > need.
                                          > > ; See thr APRS specification for information on how to format an Object
                                          or
                                          > > Item string.
                                          > >
                                          > > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
                                          > > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
                                          > >
                                          > > ; IGATE Params. If specified you will gate RF packets and your beacons
                                          to
                                          > > APRS-IS
                                          > >
                                          > > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an IPV6
                                          > Host
                                          > > ISPort=10152 ; Normal port for a filtered feed
                                          > > ISPasscode=17580 ; If you don't already have a passcode I can issue you
                                          > one.
                                          > > ;
                                          > > ; You can specify a filter command to be sent when you log on to
                                          APRS-IS.
                                          > > Normally you don't
                                          > > ; need one. The APRS Mapping Application (BPQAPRS) sets a filter when it
                                          > > starts,
                                          > > ; and if you aren't running an APRS application, there isn't much point
                                          in
                                          > > getting info from APRS-IS
                                          > > ;
                                          > > ISFilter=m/50 ; Filter Command if needed
                                          > >
                                          > > ***
                                          > > ;
                                          > >
                                          > > The problem is it is not connecting to the aprs server. I have tried
                                          sever
                                          > > servers and I run the one I am trying to connect to and it is working.
                                          > > The second thing is the aprs pages I felt needed to be in a folder
                                          'aprs'
                                          > > but would not work page not found it appears anything in the root works
                                          > but
                                          > > not in a folder.
                                          > >
                                          > > do I have something wrong or am I missing something.
                                          > >
                                          > > Stephen
                                          > >
                                          >


                                          -- 
                                          
                                          K.O. Higgs 
                                          n0kfq@...
                                          
                                          



                                          -- 
                                          
                                          K.O. Higgs 
                                          n0kfq@...
                                          
                                          


                                        • K.O. Higgs
                                          Oooops! Sorry... K.O. ... -- K.O. Higgs n0kfq@centurytel.net Oooops! Sorry... K.O. On 6/11/2012 10:56 AM, Joel Yates wrote:   That was in response to the
                                          Message 21 of 30 , Jun 11, 2012
                                            Oooops! Sorry...

                                            K.O.
                                            On 6/11/2012 10:56 AM, Joel Yates wrote:
                                             

                                            That was in response to the header line problem...73's Joel N4JOA

                                            Sent via BlackBerry from T-Mobile

                                            From: "K.O. Higgs" <n0kfq@...>
                                            Date: Mon, 11 Jun 2012 10:48:37 -0500
                                            Subject: Re: [BPQ32] Re: Problem BPQ 32 windows

                                            Will try that... but don't see how that will fix the problem about having to re-boot the
                                            computer when BPQ fails..

                                            K.O.
                                            On 6/11/2012 10:44 AM, Joel Yates wrote:
                                             

                                            Tell it to cascade the windows and then reposition them.
                                            ...73's Joel N4JOA

                                            Sent via BlackBerry from T-Mobile

                                            From: "K.O. Higgs" <n0kfq@...>
                                            Date: Mon, 11 Jun 2012 10:33:31 -0500
                                            Subject: Re: [BPQ32] Re: Problem BPQ 32 windows

                                            I am running the same Windows system and am having the same problem.

                                            K.O. n0kfq
                                            On 6/11/2012 10:16 AM, Mike Melnik wrote:
                                             

                                            Mike

                                            Send me your bpq32.cfg

                                            Mike-N9PMO
                                            www.n9pmo.com
                                            mmelnik1@...

                                            -----Original Message-----
                                            From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                            Michael Mullikin
                                            Sent: Monday, June 11, 2012 8:53 AM
                                            To: BPQ32@yahoogroups.com
                                            Subject: RE: [BPQ32] Re: Problem BPQ 32 windows

                                             
                                            Hi John
                                            I seem to have a problem with BPQ32 Window.  I notice your picture of Bpq
                                            dll consol
                                            Shows a top line identifying the window.  When BPQ runs the only top line on
                                            the windows is the BPQ consol None of the other windows show the header
                                            line.  Also if I click the minimize button on the BPQ consol it disappears
                                            in to computer land.  I cant  find it and cant bring it back up.  I have to
                                            shut down the program and restart it to get it to come back.  I am using
                                            widows XP PRO service pack 3.  I  there a setting I need to adjust???
                                             
                                            Thank You 
                                            Mike  W8EHH

                                            From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of John
                                            Wiseman
                                            Sent: Sunday, June 10, 2012 1:16 PM
                                            To: BPQ32@yahoogroups.com
                                            Subject: RE: [BPQ32] Re: Problem with APRS and Web Pages
                                             
                                             
                                            Stephen
                                             
                                            You should have something like
                                             

                                             
                                            If the Igate line isn’t there, then something very odd is going on – it
                                            suggests the APRS config was rejected, but it that case there should be
                                            error messages in the console window.
                                             
                                            Did you get “APRS Digi/Gateway Enabled” on the console window (after the
                                            “Initialising Port… “ messages)?
                                             
                                            73
                                            John
                                             

                                            From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                            STEPHEN
                                            Sent: 10 June 2012 17:57
                                            To: BPQ32@yahoogroups.com
                                            Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                             
                                             
                                            John
                                            we are getting closer
                                            The aprs pages are working but I still will not connect to the APRS server
                                            You stated "Check that the "Enable Igate" checkbox on the bpq32.dll console
                                            window is checked."

                                            I don't see a Enable Igate on the bpq32.dll window?

                                            I also changed the server as Mike stated.

                                            Thanks

                                            --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
                                            >
                                            > Stephen,
                                            >
                                            >
                                            >
                                            > http://www.ve9sc.com:84/allrf.html isn't really working. The HTML is
                                            > returned, but the APRS data isn't being placed in the page. This suggests
                                            to
                                            > me that you have the APRS pages in BPQ32/HTML, not BPQ32/BPQAPRS/HTML.
                                            >
                                            >
                                            >
                                            > Check that the "Enable Igate" checkbox on the bpq32.dll console window is
                                            > checked. It should be set by default, but if it gets unset, the code won't
                                            > connect.
                                            >
                                            >
                                            >
                                            > I don't know why MailChat is giving a program error in Socket Data every
                                            10
                                            > minutes, but this isn't related to the Web Server - it is most likely the
                                            > POP3 server trying to retrieve a message, and being upset by what it gets.
                                            > The LOG_TCP.txt file may give a clue as to what is going on.
                                            >
                                            >
                                            >
                                            > 73,
                                            >
                                            > John
                                            >
                                            >
                                            >
                                            >
                                            >
                                            >
                                            >
                                            >
                                            >
                                            > _____
                                            >
                                            > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                            > STEPHEN
                                            > Sent: 10 June 2012 16:46
                                            > To: BPQ32@yahoogroups.com
                                            > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                            >
                                            >
                                            >
                                            >
                                            >
                                            > John
                                            >
                                            > I am running javAPRSSrvr 3.15b08 that should be fine.
                                            > http://www.ve9sc.com:14501/
                                            >
                                            > I know this works as i looked at Jerry's
                                            > http://w9bbs.no-ip.org:8080/ and it is working.
                                            >
                                            > I comment out FloodCalls, DigiCalls, and OBJECT statementsas you stated.
                                            >
                                            > Restarted BPQ and it still will not connect to the aprs server. I tried
                                            > other servers but they will not work either. I tried:
                                            >
                                            > The Main APRS servers "First" & "Second" etc.
                                            >
                                            > The console screen is fine no errors. It states :
                                            >
                                            > APRS/Digi/Gateway Enabled
                                            >
                                            > I have all the html file in the html folder no subfolders the link
                                            >
                                            > http://www.ve9sc.com:84/Node/Routes.html
                                            >
                                            > try the aprs link it will not work nor will that link "APRS" from any of
                                            the
                                            > node pages.
                                            >
                                            > But http://www.ve9sc.com:84/allrf.html works if appears the link is adding
                                            a
                                            > folder aprs.
                                            > http://www.ve9sc.com:84/aprs/all.html
                                            >
                                            > I looked at the debug log
                                            >
                                            > 120610 00:00:02 ! |Enter HouseKeeping
                                            > 120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 02:07:37 ! Too Many Program Errors - Closing
                                            > 120610 02:07:37 ! Attempting to Restart C:\Program
                                            > Files\BPQ32\BPQMailChat.exe
                                            > 120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to
                                            HouseKeeping
                                            > 78674
                                            > 120610 02:08:46 ! Program Starting
                                            > 120610 02:08:46 ! BPQMailChat Starting
                                            > 120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 06:23:18 ! Too Many Program Errors - Closing
                                            > 120610 06:23:18 ! Attempting to Restart C:\Program
                                            > Files\BPQ32\BPQMailChat.exe
                                            > 120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to
                                            HouseKeeping
                                            > 63324
                                            > 120610 06:24:36 ! Program Starting
                                            > 120610 06:24:36 ! BPQMailChat Starting
                                            > 120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 10:39:05 ! Too Many Program Errors - Closing
                                            > 120610 10:39:05 ! Attempting to Restart C:\Program
                                            > Files\BPQ32\BPQMailChat.exe
                                            > 120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to
                                            HouseKeeping
                                            > 47986
                                            > 120610 10:40:14 ! Program Starting
                                            > 120610 10:40:14 ! BPQMailChat Starting
                                            > 120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 14:54:44 ! Too Many Program Errors - Closing
                                            > 120610 14:54:44 ! Attempting to Restart C:\Program
                                            > Files\BPQ32\BPQMailChat.exe
                                            > 120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to
                                            HouseKeeping
                                            > 32644
                                            > 120610 14:55:56 ! Program Starting
                                            > 120610 14:55:56 ! BPQMailChat Starting
                                            > 120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            > 120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                            > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                            >
                                            > I am not sure where to go from here.
                                            >
                                            > Stephen
                                            >
                                            > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "John
                                            > Wiseman" <john.wiseman@> wrote:
                                            > >
                                            > > Stephen,
                                            > >
                                            > >
                                            > >
                                            > > You should probably comment out or change the FloodCalls, DigiCalls, and
                                            > > OBJECT statements.
                                            > >
                                            > >
                                            > >
                                            > > Usually the ISHOST is an APRS-IS server, but if the server you are
                                            running
                                            > > locally emulates an IS server, that should be ok. Do you get any error
                                            > > message on the console screen when you load bpa32?
                                            > >
                                            > >
                                            > >
                                            > > The APRS page templates should be directly in folder BPQAPRS/HTML - not
                                            a
                                            > > subfolder, under your BPQ32 config folder.
                                            > >
                                            > >
                                            > >
                                            > > 73,
                                            > >
                                            > > John
                                            > >
                                            > >
                                            > >
                                            > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                            > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                                            > Of
                                            > > STEPHEN
                                            > > Sent: 10 June 2012 15:52
                                            > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                            > > Subject: [BPQ32] Problem with APRS and Web Pages
                                            > >
                                            > >
                                            > >
                                            > >
                                            > >
                                            > > I did the last install all worked fine with the install. I added the
                                            html
                                            > > and aprs web pages. But the aprs seems to be not working.
                                            > >
                                            > > I added the following from example to the script:
                                            > >
                                            > > APRSDIGI
                                            > >
                                            > > APRSCall VE1MPF-10
                                            > > StatusMsg=BPQ32 IGate Moncton, New Brunswick, Canada
                                            > >
                                            > > Symbol=a ; Icon to display for station.
                                            > > Symset=B ; This is a "B" in a Red Diamond.
                                            > >
                                            > > ;
                                            > > ; Specify a Dest Addreess and Path for each port you want to use for
                                            APRS.
                                            > > No dest means receive only port
                                            > > ; Ports without an APRSPath statement will not be used by the Digi
                                            > > ;
                                            > > ; Note if you specify APRS as the destination call it will be replaced
                                            by
                                            > > the current BPQ32 APRS
                                            > > ; identification destination - APBPQ1. If you really want to send APRS,
                                            > > specify APRS-0.
                                            > >
                                            > > APRSPath 1= ; Receive only port
                                            > > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
                                            > > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
                                            > >
                                            > > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
                                            > > MobileBeaconInterval=2 ; Beacon interval when moving
                                            > >
                                            > > ; Define Crossport Digi. For each port, a list of ports to send a packet
                                            > to
                                            > > (IS means send to APRS-IS)
                                            > > ; If a Digimap isn't specified for a port, digi out on the port the
                                            packet
                                            > > arrived on,
                                            > > ; and send to APRS-IS (if enabled)
                                            > > ; If you want to digi on same port, but not send to APRS-IS, Specify
                                            > Digimap
                                            > > n=n
                                            > > ; If you dont want to digi on a port, specify Digimap n=
                                            > > ;
                                            > > ; If you only have one APRS port, you probably don't need a Digimap
                                            > > statement
                                            > >
                                            > > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
                                            > > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
                                            > > ;Digimap 9= ; Don't digi packets received on port 9
                                            > >
                                            > > ; Define Digipeating parameters
                                            > >
                                            > > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
                                            > > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
                                            > > DigiCalls=SKIG ; Calls for Normal (ie no SSID manipulation) Digi
                                            > > ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave out
                                            > > TraceCalls and FloodCalls
                                            > >
                                            > > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the
                                            > > call to be left as it is received.
                                            > >
                                            > > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is
                                            > > received with n greater than
                                            > > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is
                                            > decremented.
                                            > >
                                            > > ; Specify position. You can specify a fixed LAT/LONG, or use GPS
                                            > >
                                            > > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
                                            > > LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)
                                            > >
                                            > > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
                                            > > GPSSpeed=0 ; overriding the values set above.
                                            > >
                                            > > ; The Digi can generate Object and Item reports.
                                            > >
                                            > > ; The format is pretty strict - a single space between param=value
                                            pairs,
                                            > > ; a comma but no spaces in PATH and PORT string.
                                            > >
                                            > > ; Minimum interval is 10 mins. You can have as many OBJECT lines as you
                                            > > need.
                                            > > ; See thr APRS specification for information on how to format an Object
                                            or
                                            > > Item string.
                                            > >
                                            > > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
                                            > > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
                                            > >
                                            > > ; IGATE Params. If specified you will gate RF packets and your beacons
                                            to
                                            > > APRS-IS
                                            > >
                                            > > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an IPV6
                                            > Host
                                            > > ISPort=10152 ; Normal port for a filtered feed
                                            > > ISPasscode=17580 ; If you don't already have a passcode I can issue you
                                            > one.
                                            > > ;
                                            > > ; You can specify a filter command to be sent when you log on to
                                            APRS-IS.
                                            > > Normally you don't
                                            > > ; need one. The APRS Mapping Application (BPQAPRS) sets a filter when it
                                            > > starts,
                                            > > ; and if you aren't running an APRS application, there isn't much point
                                            in
                                            > > getting info from APRS-IS
                                            > > ;
                                            > > ISFilter=m/50 ; Filter Command if needed
                                            > >
                                            > > ***
                                            > > ;
                                            > >
                                            > > The problem is it is not connecting to the aprs server. I have tried
                                            sever
                                            > > servers and I run the one I am trying to connect to and it is working.
                                            > > The second thing is the aprs pages I felt needed to be in a folder
                                            'aprs'
                                            > > but would not work page not found it appears anything in the root works
                                            > but
                                            > > not in a folder.
                                            > >
                                            > > do I have something wrong or am I missing something.
                                            > >
                                            > > Stephen
                                            > >
                                            >


                                            -- 
                                            
                                            K.O. Higgs 
                                            n0kfq@...
                                            
                                            



                                            -- 
                                            
                                            K.O. Higgs 
                                            n0kfq@...
                                            
                                            



                                            -- 
                                            
                                            K.O. Higgs 
                                            n0kfq@...
                                            
                                            


                                          • Daryll Webb
                                            My console looks good but my mail/chat is my trouble. I came home from work and mail/chat 1.4.51.1 had crashed and windows needed to close it. I did and the
                                            Message 22 of 30 , Jun 11, 2012
                                              My console looks good but my mail/chat is my trouble. I came home from work and mail/chat 1.4.51.1 had crashed and windows needed to close it. I did and the hole bpq program closed as well, no pc reboot jest restart bpq and working ok now.
                                              Bpq ran all day yesterday and last night about 20 hours  then 8 hours later after work it stopped. 
                                              My console window works grate. It holds the monitor window and the sub windows r stream, telnet, bpq32dll.
                                              I like it.  My mail/chat don't start with bpq and I need to start it after the main program starts.
                                              Is there a way to have mail/chat and aprs start as bpq starts? Can I put mail/chat and aprs in the start folder in windows? One click and we r off.
                                              Buster kg9nd


                                              From: K.O. Higgs <n0kfq@...>
                                              To: BPQ32@yahoogroups.com
                                              Sent: Monday, June 11, 2012 11:14 AM
                                              Subject: Re: [BPQ32] Re: Problem BPQ 32 windows

                                               
                                              Oooops! Sorry...

                                              K.O.
                                              On 6/11/2012 10:56 AM, Joel Yates wrote:
                                               
                                              That was in response to the header line problem...73's Joel N4JOA
                                              Sent via BlackBerry from T-Mobile

                                              From: "K.O. Higgs" <n0kfq@...>
                                              Date: Mon, 11 Jun 2012 10:48:37 -0500
                                              Subject: Re: [BPQ32] Re: Problem BPQ 32 windows

                                              Will try that... but don't see how that will fix the problem about having to re-boot the
                                              computer when BPQ fails..

                                              K.O.
                                              On 6/11/2012 10:44 AM, Joel Yates wrote:
                                               
                                              Tell it to cascade the windows and then reposition them.
                                              ...73's Joel N4JOA
                                              Sent via BlackBerry from T-Mobile

                                              From: "K.O. Higgs" <n0kfq@...>
                                              Date: Mon, 11 Jun 2012 10:33:31 -0500
                                              Subject: Re: [BPQ32] Re: Problem BPQ 32 windows

                                              I am running the same Windows system and am having the same problem.

                                              K.O. n0kfq
                                              On 6/11/2012 10:16 AM, Mike Melnik wrote:
                                               
                                              Mike

                                              Send me your bpq32.cfg

                                              Mike-N9PMO
                                              www.n9pmo.com
                                              mmelnik1@...

                                              -----Original Message-----
                                              From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                              Michael Mullikin
                                              Sent: Monday, June 11, 2012 8:53 AM
                                              To: BPQ32@yahoogroups.com
                                              Subject: RE: [BPQ32] Re: Problem BPQ 32 windows

                                               
                                              Hi John
                                              I seem to have a problem with BPQ32 Window.  I notice your picture of Bpq
                                              dll consol
                                              Shows a top line identifying the window.  When BPQ runs the only top line on
                                              the windows is the BPQ consol None of the other windows show the header
                                              line.  Also if I click the minimize button on the BPQ consol it disappears
                                              in to computer land.  I cant  find it and cant bring it back up.  I have to
                                              shut down the program and restart it to get it to come back.  I am using
                                              widows XP PRO service pack 3.  I  there a setting I need to adjust???
                                               
                                              Thank You 
                                              Mike  W8EHH

                                              From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of John
                                              Wiseman
                                              Sent: Sunday, June 10, 2012 1:16 PM
                                              To: BPQ32@yahoogroups.com
                                              Subject: RE: [BPQ32] Re: Problem with APRS and Web Pages
                                               
                                               
                                              Stephen
                                               
                                              You should have something like
                                               

                                               
                                              If the Igate line isn’t there, then something very odd is going on – it
                                              suggests the APRS config was rejected, but it that case there should be
                                              error messages in the console window.
                                               
                                              Did you get “APRS Digi/Gateway Enabled” on the console window (after the
                                              “Initialising Port… “ messages)?
                                               
                                              73
                                              John
                                               

                                              From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                              STEPHEN
                                              Sent: 10 June 2012 17:57
                                              To: BPQ32@yahoogroups.com
                                              Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                               
                                               
                                              John
                                              we are getting closer
                                              The aprs pages are working but I still will not connect to the APRS server
                                              You stated "Check that the "Enable Igate" checkbox on the bpq32.dll console
                                              window is checked."

                                              I don't see a Enable Igate on the bpq32.dll window?

                                              I also changed the server as Mike stated.

                                              Thanks

                                              --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
                                              >
                                              > Stephen,
                                              >
                                              >
                                              >
                                              > http://www.ve9sc.com:84/allrf.html isn't really working. The HTML is
                                              > returned, but the APRS data isn't being placed in the page. This suggests
                                              to
                                              > me that you have the APRS pages in BPQ32/HTML, not BPQ32/BPQAPRS/HTML.
                                              >
                                              >
                                              >
                                              > Check that the "Enable Igate" checkbox on the bpq32.dll console window is
                                              > checked. It should be set by default, but if it gets unset, the code won't
                                              > connect.
                                              >
                                              >
                                              >
                                              > I don't know why MailChat is giving a program error in Socket Data every
                                              10
                                              > minutes, but this isn't related to the Web Server - it is most likely the
                                              > POP3 server trying to retrieve a message, and being upset by what it gets.
                                              > The LOG_TCP.txt file may give a clue as to what is going on.
                                              >
                                              >
                                              >
                                              > 73,
                                              >
                                              > John
                                              >
                                              >
                                              >
                                              >
                                              >
                                              >
                                              >
                                              >
                                              >
                                              > _____
                                              >
                                              > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                              > STEPHEN
                                              > Sent: 10 June 2012 16:46
                                              > To: BPQ32@yahoogroups.com
                                              > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                              >
                                              >
                                              >
                                              >
                                              >
                                              > John
                                              >
                                              > I am running javAPRSSrvr 3.15b08 that should be fine.
                                              > http://www.ve9sc.com:14501/
                                              >
                                              > I know this works as i looked at Jerry's
                                              > http://w9bbs.no-ip.org:8080/ and it is working.
                                              >
                                              > I comment out FloodCalls, DigiCalls, and OBJECT statementsas you stated.
                                              >
                                              > Restarted BPQ and it still will not connect to the aprs server. I tried
                                              > other servers but they will not work either. I tried:
                                              >
                                              > The Main APRS servers "First" & "Second" etc.
                                              >
                                              > The console screen is fine no errors. It states :
                                              >
                                              > APRS/Digi/Gateway Enabled
                                              >
                                              > I have all the html file in the html folder no subfolders the link
                                              >
                                              > http://www.ve9sc.com:84/Node/Routes.html
                                              >
                                              > try the aprs link it will not work nor will that link "APRS" from any of
                                              the
                                              > node pages.
                                              >
                                              > But http://www.ve9sc.com:84/allrf.html works if appears the link is adding
                                              a
                                              > folder aprs.
                                              > http://www.ve9sc.com:84/aprs/all.html
                                              >
                                              > I looked at the debug log
                                              >
                                              > 120610 00:00:02 ! |Enter HouseKeeping
                                              > 120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 02:07:37 ! Too Many Program Errors - Closing
                                              > 120610 02:07:37 ! Attempting to Restart C:\Program
                                              > Files\BPQ32\BPQMailChat.exe
                                              > 120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to
                                              HouseKeeping
                                              > 78674
                                              > 120610 02:08:46 ! Program Starting
                                              > 120610 02:08:46 ! BPQMailChat Starting
                                              > 120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 06:23:18 ! Too Many Program Errors - Closing
                                              > 120610 06:23:18 ! Attempting to Restart C:\Program
                                              > Files\BPQ32\BPQMailChat.exe
                                              > 120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to
                                              HouseKeeping
                                              > 63324
                                              > 120610 06:24:36 ! Program Starting
                                              > 120610 06:24:36 ! BPQMailChat Starting
                                              > 120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 10:39:05 ! Too Many Program Errors - Closing
                                              > 120610 10:39:05 ! Attempting to Restart C:\Program
                                              > Files\BPQ32\BPQMailChat.exe
                                              > 120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to
                                              HouseKeeping
                                              > 47986
                                              > 120610 10:40:14 ! Program Starting
                                              > 120610 10:40:14 ! BPQMailChat Starting
                                              > 120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 14:54:44 ! Too Many Program Errors - Closing
                                              > 120610 14:54:44 ! Attempting to Restart C:\Program
                                              > Files\BPQ32\BPQMailChat.exe
                                              > 120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to
                                              HouseKeeping
                                              > 32644
                                              > 120610 14:55:56 ! Program Starting
                                              > 120610 14:55:56 ! BPQMailChat Starting
                                              > 120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              > 120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                              > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                              >
                                              > I am not sure where to go from here.
                                              >
                                              > Stephen
                                              >
                                              > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "John
                                              > Wiseman" <john.wiseman@> wrote:
                                              > >
                                              > > Stephen,
                                              > >
                                              > >
                                              > >
                                              > > You should probably comment out or change the FloodCalls, DigiCalls, and
                                              > > OBJECT statements.
                                              > >
                                              > >
                                              > >
                                              > > Usually the ISHOST is an APRS-IS server, but if the server you are
                                              running
                                              > > locally emulates an IS server, that should be ok. Do you get any error
                                              > > message on the console screen when you load bpa32?
                                              > >
                                              > >
                                              > >
                                              > > The APRS page templates should be directly in folder BPQAPRS/HTML - not
                                              a
                                              > > subfolder, under your BPQ32 config folder.
                                              > >
                                              > >
                                              > >
                                              > > 73,
                                              > >
                                              > > John
                                              > >
                                              > >
                                              > >
                                              > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                              > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                                              > Of
                                              > > STEPHEN
                                              > > Sent: 10 June 2012 15:52
                                              > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                              > > Subject: [BPQ32] Problem with APRS and Web Pages
                                              > >
                                              > >
                                              > >
                                              > >
                                              > >
                                              > > I did the last install all worked fine with the install. I added the
                                              html
                                              > > and aprs web pages. But the aprs seems to be not working.
                                              > >
                                              > > I added the following from example to the script:
                                              > >
                                              > > APRSDIGI
                                              > >
                                              > > APRSCall VE1MPF-10
                                              > > StatusMsg=BPQ32 IGate Moncton, New Brunswick, Canada
                                              > >
                                              > > Symbol=a ; Icon to display for station.
                                              > > Symset=B ; This is a "B" in a Red Diamond.
                                              > >
                                              > > ;
                                              > > ; Specify a Dest Addreess and Path for each port you want to use for
                                              APRS.
                                              > > No dest means receive only port
                                              > > ; Ports without an APRSPath statement will not be used by the Digi
                                              > > ;
                                              > > ; Note if you specify APRS as the destination call it will be replaced
                                              by
                                              > > the current BPQ32 APRS
                                              > > ; identification destination - APBPQ1. If you really want to send APRS,
                                              > > specify APRS-0.
                                              > >
                                              > > APRSPath 1= ; Receive only port
                                              > > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
                                              > > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
                                              > >
                                              > > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
                                              > > MobileBeaconInterval=2 ; Beacon interval when moving
                                              > >
                                              > > ; Define Crossport Digi. For each port, a list of ports to send a packet
                                              > to
                                              > > (IS means send to APRS-IS)
                                              > > ; If a Digimap isn't specified for a port, digi out on the port the
                                              packet
                                              > > arrived on,
                                              > > ; and send to APRS-IS (if enabled)
                                              > > ; If you want to digi on same port, but not send to APRS-IS, Specify
                                              > Digimap
                                              > > n=n
                                              > > ; If you dont want to digi on a port, specify Digimap n=
                                              > > ;
                                              > > ; If you only have one APRS port, you probably don't need a Digimap
                                              > > statement
                                              > >
                                              > > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
                                              > > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
                                              > > ;Digimap 9= ; Don't digi packets received on port 9
                                              > >
                                              > > ; Define Digipeating parameters
                                              > >
                                              > > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
                                              > > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
                                              > > DigiCalls=SKIG ; Calls for Normal (ie no SSID manipulation) Digi
                                              > > ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave out
                                              > > TraceCalls and FloodCalls
                                              > >
                                              > > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the
                                              > > call to be left as it is received.
                                              > >
                                              > > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is
                                              > > received with n greater than
                                              > > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is
                                              > decremented.
                                              > >
                                              > > ; Specify position. You can specify a fixed LAT/LONG, or use GPS
                                              > >
                                              > > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
                                              > > LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)
                                              > >
                                              > > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
                                              > > GPSSpeed=0 ; overriding the values set above.
                                              > >
                                              > > ; The Digi can generate Object and Item reports.
                                              > >
                                              > > ; The format is pretty strict - a single space between param=value
                                              pairs,
                                              > > ; a comma but no spaces in PATH and PORT string.
                                              > >
                                              > > ; Minimum interval is 10 mins. You can have as many OBJECT lines as you
                                              > > need.
                                              > > ; See thr APRS specification for information on how to format an Object
                                              or
                                              > > Item string.
                                              > >
                                              > > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
                                              > > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
                                              > >
                                              > > ; IGATE Params. If specified you will gate RF packets and your beacons
                                              to
                                              > > APRS-IS
                                              > >
                                              > > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an IPV6
                                              > Host
                                              > > ISPort=10152 ; Normal port for a filtered feed
                                              > > ISPasscode=17580 ; If you don't already have a passcode I can issue you
                                              > one.
                                              > > ;
                                              > > ; You can specify a filter command to be sent when you log on to
                                              APRS-IS.
                                              > > Normally you don't
                                              > > ; need one. The APRS Mapping Application (BPQAPRS) sets a filter when it
                                              > > starts,
                                              > > ; and if you aren't running an APRS application, there isn't much point
                                              in
                                              > > getting info from APRS-IS
                                              > > ;
                                              > > ISFilter=m/50 ; Filter Command if needed
                                              > >
                                              > > ***
                                              > > ;
                                              > >
                                              > > The problem is it is not connecting to the aprs server. I have tried
                                              sever
                                              > > servers and I run the one I am trying to connect to and it is working.
                                              > > The second thing is the aprs pages I felt needed to be in a folder
                                              'aprs'
                                              > > but would not work page not found it appears anything in the root works
                                              > but
                                              > > not in a folder.
                                              > >
                                              > > do I have something wrong or am I missing something.
                                              > >
                                              > > Stephen
                                              > >
                                              >


                                              -- 
                                              
                                              K.O. Higgs 
                                              n0kfq@...
                                              
                                              



                                              -- 
                                              
                                              K.O. Higgs 
                                              n0kfq@...
                                              
                                              



                                              -- 
                                              
                                              K.O. Higgs 
                                              n0kfq@...
                                              
                                              




                                            • Daryll Webb
                                              I find my console after minimize in the bpq icon bottom right in task bar jest like the last program. Running winxp pro sp3 Buster kg9nd
                                              Message 23 of 30 , Jun 11, 2012
                                                I find my console after minimize in the bpq icon bottom right in task bar jest like the last program.
                                                Running winxp pro sp3
                                                Buster kg9nd


                                                From: Michael Mullikin <w8ehh1@...>
                                                To: BPQ32@yahoogroups.com
                                                Sent: Monday, June 11, 2012 8:53 AM
                                                Subject: RE: [BPQ32] Re: Problem BPQ 32 windows

                                                 
                                                Hi John
                                                I seem to have a problem with BPQ32 Window.  I notice your picture of Bpq dll consol
                                                Shows a top line identifying the window.  When BPQ runs the only top line on the windows is the BPQ consol None of the other windows show the header line.  Also if I click the minimize button on the BPQ consol it disappears in to computer land.  I cant  find it and cant bring it back up.  I have to shut down the program and restart it to get it to come back.  I am using widows XP PRO service pack 3.  I  there a setting I need to adjust???
                                                 
                                                Thank You 
                                                Mike  W8EHH

                                                From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of John Wiseman
                                                Sent: Sunday, June 10, 2012 1:16 PM
                                                To: BPQ32@yahoogroups.com
                                                Subject: RE: [BPQ32] Re: Problem with APRS and Web Pages
                                                 
                                                 
                                                Stephen
                                                 
                                                You should have something like
                                                 
                                                 
                                                If the Igate line isn’t there, then something very odd is going on – it suggests the APRS config was rejected, but it that case there should be error messages in the console window.
                                                 
                                                Did you get “APRS Digi/Gateway Enabled” on the console window (after the “ Initialising Port … “ messages)?
                                                 
                                                73
                                                John
                                                 

                                                From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of STEPHEN
                                                Sent: 10 June 2012 17:57
                                                To: BPQ32@yahoogroups.com
                                                Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                                 
                                                 
                                                John
                                                we are getting closer
                                                The aprs pages are working but I still will not connect to the APRS server
                                                You stated "Check that the "Enable Igate" checkbox on the bpq32.dll console window is checked."

                                                I don't see a Enable Igate on the bpq32.dll window?

                                                I also changed the server as Mike stated.

                                                Thanks

                                                --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
                                                >
                                                > Stephen,
                                                >
                                                >
                                                >
                                                > http://www.ve9sc.com:84/allrf.html
                                                isn't really working. The HTML is
                                                > returned, but the APRS data isn't being placed in the page. This suggests
                                                to
                                                > me that you have the APRS pages in BPQ32/HTML, not BPQ32/BPQAPRS/HTML.
                                                >
                                                >
                                                >
                                                > Check that the "Enable Igate" checkbox on the bpq32.dll console
                                                window is
                                                > checked. It should be set by default, but if it gets unset, the code won't
                                                > connect.
                                                >
                                                >
                                                >
                                                > I don't know why MailChat is giving a program error in Socket Data every
                                                10
                                                > minutes, but this isn't related to the Web Server - it is most likely the
                                                > POP3 server trying to retrieve a message, and being upset by what it gets.
                                                > The LOG_TCP.txt file may give a clue as to what is going on.
                                                >
                                                >
                                                >
                                                > 73,
                                                >
                                                > John
                                                >
                                                >
                                                >
                                                >
                                                >
                                                >
                                                >
                                                >
                                                >
                                                > _____
                                                >
                                                > From: BPQ32@yahoogroups.com
                                                [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                                > STEPHEN
                                                > Sent: 10 June 2012 16:46
                                                > To: BPQ32@yahoogroups.com
                                                > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                                >
                                                >
                                                >
                                                >
                                                >
                                                > John
                                                >
                                                > I am running javAPRSSrvr 3.15b08 that should be fine.
                                                > http://www.ve9sc.com:14501/
                                                >
                                                > I know this works as i looked at Jerry's
                                                > http://w9bbs.no-ip.org:8080/
                                                and it is working.
                                                >
                                                > I comment out FloodCalls, DigiCalls, and OBJECT statementsas you stated.
                                                >
                                                > Restarted BPQ and it still will not connect to the aprs server. I tried
                                                > other servers but they will not work either. I tried:
                                                >
                                                > The Main APRS servers "First" & "Second" etc.
                                                >
                                                > The console screen is fine no errors. It states :
                                                >
                                                > APRS/Digi/Gateway Enabled
                                                >
                                                > I have all the html file in the html folder no subfolders the link
                                                >
                                                > http://www.ve9sc.com:84/Node/Routes.html
                                                >
                                                > try the aprs link it will not work nor will that link "APRS"
                                                from any of the
                                                > node pages.
                                                >
                                                > But http://www.ve9sc.com:84/allrf.html
                                                works if appears the link is adding a
                                                > folder aprs.
                                                > http://www.ve9sc.com:84/aprs/all.html
                                                >
                                                > I looked at the debug log
                                                >
                                                > 120610 00:00:02 ! |Enter HouseKeeping
                                                > 120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 02:07:37 ! Too Many Program Errors - Closing
                                                > 120610 02:07:37 ! Attempting to Restart C:\Program
                                                > Files\BPQ32\BPQMailChat.exe
                                                > 120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to
                                                HouseKeeping
                                                > 78674
                                                > 120610 02:08:46 ! Program Starting
                                                > 120610 02:08:46 ! BPQMailChat Starting
                                                > 120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 06:23:18 ! Too Many Program Errors - Closing
                                                > 120610 06:23:18 ! Attempting to Restart C:\Program
                                                > Files\BPQ32\BPQMailChat.exe
                                                > 120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to
                                                HouseKeeping
                                                > 63324
                                                > 120610 06:24:36 ! Program Starting
                                                > 120610 06:24:36 ! BPQMailChat Starting
                                                > 120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 10:39:05 ! Too Many Program Errors - Closing
                                                > 120610 10:39:05 ! Attempting to Restart C:\Program
                                                > Files\BPQ32\BPQMailChat.exe
                                                > 120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to
                                                HouseKeeping
                                                > 47986
                                                > 120610 10:40:14 ! Program Starting
                                                > 120610 10:40:14 ! BPQMailChat Starting
                                                > 120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 14:54:44 ! Too Many Program Errors - Closing
                                                > 120610 14:54:44 ! Attempting to Restart C:\Program
                                                > Files\BPQ32\BPQMailChat.exe
                                                > 120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to
                                                HouseKeeping
                                                > 32644
                                                > 120610 14:55:56 ! Program Starting
                                                > 120610 14:55:56 ! BPQMailChat Starting
                                                > 120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                > 120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                >
                                                > I am not sure where to go from here.
                                                >
                                                > Stephen
                                                >
                                                > --- In BPQ32@yahoogroups.com
                                                <mailto:BPQ32%40yahoogroups.com> , "John
                                                > Wiseman" <john.wiseman@> wrote:
                                                > >
                                                > > Stephen,
                                                > >
                                                > >
                                                > >
                                                > > You should probably comment out or change the FloodCalls, DigiCalls,
                                                and
                                                > > OBJECT statements.
                                                > >
                                                > >
                                                > >
                                                > > Usually the ISHOST is an APRS-IS server, but if the server you are
                                                running
                                                > > locally emulates an IS server, that should be ok. Do you get any
                                                error
                                                > > message on the console screen when you load bpa32?
                                                > >
                                                > >
                                                > >
                                                > > The APRS page templates should be directly in folder BPQAPRS/HTML -
                                                not a
                                                > > subfolder, under your BPQ32 config folder.
                                                > >
                                                > >
                                                > >
                                                > > 73,
                                                > >
                                                > > John
                                                > >
                                                > >
                                                > >
                                                > > From: BPQ32@yahoogroups.com
                                                <mailto:BPQ32%40yahoogroups.com>
                                                > [mailto:BPQ32@yahoogroups.com
                                                <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                                                > Of
                                                > > STEPHEN
                                                > > Sent: 10 June 2012 15:52
                                                > > To: BPQ32@yahoogroups.com
                                                <mailto:BPQ32%40yahoogroups.com>
                                                > > Subject: [BPQ32] Problem with APRS and Web Pages
                                                > >
                                                > >
                                                > >
                                                > >
                                                > >
                                                > > I did the last install all worked fine with the install. I added the
                                                html
                                                > > and aprs web pages. But the aprs seems to be not working.
                                                > >
                                                > > I added the following from example to the script:
                                                > >
                                                > > APRSDIGI
                                                > >
                                                > > APRSCall VE1MPF-10
                                                > > StatusMsg=BPQ32 IGate
                                                Moncton , New Brunswick , Canada
                                                > >
                                                > > Symbol=a ; Icon to display for station.
                                                > > Symset=B ; This is a "B" in a Red Diamond.
                                                > >
                                                > > ;
                                                > > ; Specify a Dest Addreess and Path for each port you want to use for
                                                APRS.
                                                > > No dest means receive only port
                                                > > ; Ports without an APRSPath statement will not be used by the Digi
                                                > > ;
                                                > > ; Note if you specify APRS as the destination call it will be
                                                replaced by
                                                > > the current BPQ32 APRS
                                                > > ; identification destination - APBPQ1. If you really want to send
                                                APRS,
                                                > > specify APRS-0.
                                                > >
                                                > > APRSPath 1= ; Receive only port
                                                > > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
                                                > > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
                                                > >
                                                > > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
                                                > > MobileBeaconInterval=2 ; Beacon interval when moving
                                                > >
                                                > > ; Define Crossport Digi. For each port, a list of ports to send a
                                                packet
                                                > to
                                                > > (IS means send to APRS-IS)
                                                > > ; If a Digimap isn't specified for a port, digi out on the port the
                                                packet
                                                > > arrived on,
                                                > > ; and send to APRS-IS (if enabled)
                                                > > ; If you want to digi on same port, but not send to APRS-IS, Specify
                                                > Digimap
                                                > > n=n
                                                > > ; If you dont want to digi on a port, specify Digimap n=
                                                > > ;
                                                > > ; If you only have one APRS port, you probably don't need a Digimap
                                                > > statement
                                                > >
                                                > > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
                                                > > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
                                                > > ;Digimap 9= ; Don't digi packets received on port 9
                                                > >
                                                > > ; Define Digipeating parameters
                                                > >
                                                > > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
                                                > > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
                                                > > DigiCalls=SKIG ; Calls for Normal (ie no SSID manipulation)
                                                Digi
                                                > > ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave
                                                out
                                                > > TraceCalls and FloodCalls
                                                > >
                                                > > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want
                                                the
                                                > > call to be left as it is received.
                                                > >
                                                > > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is
                                                > > received with n greater than
                                                > > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is
                                                > decremented.
                                                > >
                                                > > ; Specify position. You can specify a fixed LAT/LONG, or use GPS
                                                > >
                                                > > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
                                                > > LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)
                                                > >
                                                > > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
                                                > > GPSSpeed=0 ; overriding the values set above.
                                                > >
                                                > > ; The Digi can generate Object and Item reports.
                                                > >
                                                > > ; The format is pretty strict - a single space between param=value
                                                pairs,
                                                > > ; a comma but no spaces in PATH and PORT string.
                                                > >
                                                > > ; Minimum interval is 10 mins. You can have as many OBJECT lines as
                                                you
                                                > > need.
                                                > > ; See thr APRS specification for information on how to format an
                                                Object or
                                                > > Item string.
                                                > >
                                                > > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
                                                > > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
                                                > >
                                                > > ; IGATE Params. If specified you will gate RF packets and your
                                                beacons to
                                                > > APRS-IS
                                                > >
                                                > > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an
                                                IPV6
                                                > Host
                                                > > ISPort=10152 ; Normal
                                                port for a filtered feed
                                                > > ISPasscode=17580 ; If you don't already have a passcode I can issue
                                                you
                                                > one.
                                                > > ;
                                                > > ; You can specify a filter command to be sent when you log on to
                                                APRS-IS.
                                                > > Normally you don't
                                                > > ; need one. The APRS Mapping Application (BPQAPRS) sets a filter when
                                                it
                                                > > starts,
                                                > > ; and if you aren't running an APRS application, there isn't much
                                                point in
                                                > > getting info from APRS-IS
                                                > > ;
                                                > > ISFilter=m/50 ; Filter Command if needed
                                                > >
                                                > > ***
                                                > > ;
                                                > >
                                                > > The problem is it is not connecting to the aprs server. I have tried
                                                sever
                                                > > servers and I run the one I am trying to connect to and it is
                                                working.
                                                > > The second thing is the aprs pages I felt needed to be in a folder
                                                'aprs'
                                                > > but would not work page not found it appears anything in the root
                                                works
                                                > but
                                                > > not in a folder.
                                                > >
                                                > > do I have something wrong or am I missing something.
                                                > >
                                                > > Stephen
                                                > >
                                                >


                                              • Jerry
                                                Use Startupdelayer your best option and its FREE…. DO a Search for Startupdelayer… 73 jk From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On
                                                Message 24 of 30 , Jun 11, 2012

                                                  Use Startupdelayer your best option and its FREE…. DO a Search for Startupdelayer…   73 jk

                                                   

                                                  From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Daryll Webb
                                                  Sent: Monday, June 11, 2012 4:51 PM
                                                  To: BPQ32@yahoogroups.com
                                                  Subject: Re: [BPQ32] Re: Problem BPQ 32 windows

                                                   

                                                   

                                                  My console looks good but my mail/chat is my trouble. I came home from work and mail/chat 1.4.51.1 had crashed and windows needed to close it. I did and the hole bpq program closed as well, no pc reboot jest restart bpq and working ok now.

                                                  Bpq ran all day yesterday and last night about 20 hours  then 8 hours later after work it stopped. 

                                                  My console window works grate. It holds the monitor window and the sub windows r stream, telnet, bpq32dll.

                                                  I like it.  My mail/chat don't start with bpq and I need to start it after the main program starts.

                                                  Is there a way to have mail/chat and aprs start as bpq starts? Can I put mail/chat and aprs in the start folder in windows? One click and we r off.

                                                  Buster kg9nd

                                                   


                                                  From: K.O. Higgs <n0kfq@...>
                                                  To: BPQ32@yahoogroups.com
                                                  Sent: Monday, June 11, 2012 11:14 AM
                                                  Subject: Re: [BPQ32] Re: Problem BPQ 32 windows

                                                   

                                                   

                                                  Oooops! Sorry...

                                                  K.O.

                                                  On 6/11/2012 10:56 AM, Joel Yates wrote:

                                                   

                                                  That was in response to the header line problem...73's Joel N4JOA

                                                  Sent via BlackBerry from T-Mobile


                                                  From: "K.O. Higgs" <n0kfq@...>

                                                  Date: Mon, 11 Jun 2012 10:48:37 -0500

                                                  Subject: Re: [BPQ32] Re: Problem BPQ 32 windows

                                                   

                                                  Will try that... but don't see how that will fix the problem about having to re-boot the
                                                  computer when BPQ fails..

                                                  K.O.

                                                  On 6/11/2012 10:44 AM, Joel Yates wrote:

                                                   

                                                  Tell it to cascade the windows and then reposition them.
                                                  ...73's Joel N4JOA

                                                  Sent via BlackBerry from T-Mobile


                                                  From: "K.O. Higgs" <n0kfq@...>

                                                  Date: Mon, 11 Jun 2012 10:33:31 -0500

                                                  Subject: Re: [BPQ32] Re: Problem BPQ 32 windows

                                                   

                                                  I am running the same Windows system and am having the same problem.

                                                  K.O. n0kfq

                                                  On 6/11/2012 10:16 AM, Mike Melnik wrote:

                                                   

                                                  Mike

                                                  Send me your bpq32.cfg

                                                  Mike-N9PMO
                                                  www.n9pmo.com
                                                  mmelnik1@...

                                                  -----Original Message-----
                                                  From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                                  Michael Mullikin
                                                  Sent: Monday, June 11, 2012 8:53 AM
                                                  To: BPQ32@yahoogroups.com
                                                  Subject: RE: [BPQ32] Re: Problem BPQ 32 windows

                                                   
                                                  Hi John
                                                  I seem to have a problem with BPQ32 Window.  I notice your picture of Bpq
                                                  dll consol
                                                  Shows a top line identifying the window.  When BPQ runs the only top line on
                                                  the windows is the BPQ consol None of the other windows show the header
                                                  line.  Also if I click the minimize button on the BPQ consol it disappears
                                                  in to computer land.  I cant  find it and cant bring it back up.  I have to
                                                  shut down the program and restart it to get it to come back.  I am using
                                                  widows XP PRO service pack 3.  I  there a setting I need to adjust???
                                                   
                                                  Thank You 
                                                  Mike  W8EHH

                                                  From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of John
                                                  Wiseman
                                                  Sent: Sunday, June 10, 2012 1:16 PM
                                                  To: BPQ32@yahoogroups.com
                                                  Subject: RE: [BPQ32] Re: Problem with APRS and Web Pages
                                                   
                                                   
                                                  Stephen
                                                   
                                                  You should have something like
                                                   

                                                   
                                                  If the Igate line isn’t there, then something very odd is going on – it
                                                  suggests the APRS config was rejected, but it that case there should be
                                                  error messages in the console window.
                                                   
                                                  Did you get “APRS Digi/Gateway Enabled” on the console window (after the
                                                  “Initialising Port… “ messages)?
                                                   
                                                  73
                                                  John
                                                   

                                                  From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                                  STEPHEN
                                                  Sent: 10 June 2012 17:57
                                                  To: BPQ32@yahoogroups.com
                                                  Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                                   
                                                   
                                                  John
                                                  we are getting closer
                                                  The aprs pages are working but I still will not connect to the APRS server
                                                  You stated "Check that the "Enable Igate" checkbox on the bpq32.dll console
                                                  window is checked."

                                                  I don't see a Enable Igate on the bpq32.dll window?

                                                  I also changed the server as Mike stated.

                                                  Thanks

                                                  --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
                                                  >
                                                  > Stephen,
                                                  >
                                                  >
                                                  >
                                                  > http://www.ve9sc.com:84/allrf.html isn't really working. The HTML is
                                                  > returned, but the APRS data isn't being placed in the page. This suggests
                                                  to
                                                  > me that you have the APRS pages in BPQ32/HTML, not BPQ32/BPQAPRS/HTML.
                                                  >
                                                  >
                                                  >
                                                  > Check that the "Enable Igate" checkbox on the bpq32.dll console window is
                                                  > checked. It should be set by default, but if it gets unset, the code won't
                                                  > connect.
                                                  >
                                                  >
                                                  >
                                                  > I don't know why MailChat is giving a program error in Socket Data every
                                                  10
                                                  > minutes, but this isn't related to the Web Server - it is most likely the
                                                  > POP3 server trying to retrieve a message, and being upset by what it gets.
                                                  > The LOG_TCP.txt file may give a clue as to what is going on.
                                                  >
                                                  >
                                                  >
                                                  > 73,
                                                  >
                                                  > John
                                                  >
                                                  >
                                                  >
                                                  >
                                                  >
                                                  >
                                                  >
                                                  >
                                                  >
                                                  > _____
                                                  >
                                                  > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                                  > STEPHEN
                                                  > Sent: 10 June 2012 16:46
                                                  > To: BPQ32@yahoogroups.com
                                                  > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                                  >
                                                  >
                                                  >
                                                  >
                                                  >
                                                  > John
                                                  >
                                                  > I am running javAPRSSrvr 3.15b08 that should be fine.
                                                  > http://www.ve9sc.com:14501/
                                                  >
                                                  > I know this works as i looked at Jerry's
                                                  > http://w9bbs.no-ip.org:8080/ and it is working.
                                                  >
                                                  > I comment out FloodCalls, DigiCalls, and OBJECT statementsas you stated.
                                                  >
                                                  > Restarted BPQ and it still will not connect to the aprs server. I tried
                                                  > other servers but they will not work either. I tried:
                                                  >
                                                  > The Main APRS servers "First" & "Second" etc.
                                                  >
                                                  > The console screen is fine no errors. It states :
                                                  >
                                                  > APRS/Digi/Gateway Enabled
                                                  >
                                                  > I have all the html file in the html folder no subfolders the link
                                                  >
                                                  > http://www.ve9sc.com:84/Node/Routes.html
                                                  >
                                                  > try the aprs link it will not work nor will that link "APRS" from any of
                                                  the
                                                  > node pages.
                                                  >
                                                  > But http://www.ve9sc.com:84/allrf.html works if appears the link is adding
                                                  a
                                                  > folder aprs.
                                                  > http://www.ve9sc.com:84/aprs/all.html
                                                  >
                                                  > I looked at the debug log
                                                  >
                                                  > 120610 00:00:02 ! |Enter HouseKeeping
                                                  > 120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 02:07:37 ! Too Many Program Errors - Closing
                                                  > 120610 02:07:37 ! Attempting to Restart C:\Program
                                                  > Files\BPQ32\BPQMailChat.exe
                                                  > 120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to
                                                  HouseKeeping
                                                  > 78674
                                                  > 120610 02:08:46 ! Program Starting
                                                  > 120610 02:08:46 ! BPQMailChat Starting
                                                  > 120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 06:23:18 ! Too Many Program Errors - Closing
                                                  > 120610 06:23:18 ! Attempting to Restart C:\Program
                                                  > Files\BPQ32\BPQMailChat.exe
                                                  > 120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to
                                                  HouseKeeping
                                                  > 63324
                                                  > 120610 06:24:36 ! Program Starting
                                                  > 120610 06:24:36 ! BPQMailChat Starting
                                                  > 120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 10:39:05 ! Too Many Program Errors - Closing
                                                  > 120610 10:39:05 ! Attempting to Restart C:\Program
                                                  > Files\BPQ32\BPQMailChat.exe
                                                  > 120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to
                                                  HouseKeeping
                                                  > 47986
                                                  > 120610 10:40:14 ! Program Starting
                                                  > 120610 10:40:14 ! BPQMailChat Starting
                                                  > 120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 14:54:44 ! Too Many Program Errors - Closing
                                                  > 120610 14:54:44 ! Attempting to Restart C:\Program
                                                  > Files\BPQ32\BPQMailChat.exe
                                                  > 120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to
                                                  HouseKeeping
                                                  > 32644
                                                  > 120610 14:55:56 ! Program Starting
                                                  > 120610 14:55:56 ! BPQMailChat Starting
                                                  > 120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  > 120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                  > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                  >
                                                  > I am not sure where to go from here.
                                                  >
                                                  > Stephen
                                                  >
                                                  > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "John
                                                  > Wiseman" <john.wiseman@> wrote:
                                                  > >
                                                  > > Stephen,
                                                  > >
                                                  > >
                                                  > >
                                                  > > You should probably comment out or change the FloodCalls, DigiCalls, and
                                                  > > OBJECT statements.
                                                  > >
                                                  > >
                                                  > >
                                                  > > Usually the ISHOST is an APRS-IS server, but if the server you are
                                                  running
                                                  > > locally emulates an IS server, that should be ok. Do you get any error
                                                  > > message on the console screen when you load bpa32?
                                                  > >
                                                  > >
                                                  > >
                                                  > > The APRS page templates should be directly in folder BPQAPRS/HTML - not
                                                  a
                                                  > > subfolder, under your BPQ32 config folder.
                                                  > >
                                                  > >
                                                  > >
                                                  > > 73,
                                                  > >
                                                  > > John
                                                  > >
                                                  > >
                                                  > >
                                                  > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                                  > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                                                  > Of
                                                  > > STEPHEN
                                                  > > Sent: 10 June 2012 15:52
                                                  > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                                  > > Subject: [BPQ32] Problem with APRS and Web Pages
                                                  > >
                                                  > >
                                                  > >
                                                  > >
                                                  > >
                                                  > > I did the last install all worked fine with the install. I added the
                                                  html
                                                  > > and aprs web pages. But the aprs seems to be not working.
                                                  > >
                                                  > > I added the following from example to the script:
                                                  > >
                                                  > > APRSDIGI
                                                  > >
                                                  > > APRSCall VE1MPF-10
                                                  > > StatusMsg=BPQ32 IGate Moncton, New Brunswick, Canada
                                                  > >
                                                  > > Symbol=a ; Icon to display for station.
                                                  > > Symset=B ; This is a "B" in a Red Diamond.
                                                  > >
                                                  > > ;
                                                  > > ; Specify a Dest Addreess and Path for each port you want to use for
                                                  APRS.
                                                  > > No dest means receive only port
                                                  > > ; Ports without an APRSPath statement will not be used by the Digi
                                                  > > ;
                                                  > > ; Note if you specify APRS as the destination call it will be replaced
                                                  by
                                                  > > the current BPQ32 APRS
                                                  > > ; identification destination - APBPQ1. If you really want to send APRS,
                                                  > > specify APRS-0.
                                                  > >
                                                  > > APRSPath 1= ; Receive only port
                                                  > > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
                                                  > > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
                                                  > >
                                                  > > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
                                                  > > MobileBeaconInterval=2 ; Beacon interval when moving
                                                  > >
                                                  > > ; Define Crossport Digi. For each port, a list of ports to send a packet
                                                  > to
                                                  > > (IS means send to APRS-IS)
                                                  > > ; If a Digimap isn't specified for a port, digi out on the port the
                                                  packet
                                                  > > arrived on,
                                                  > > ; and send to APRS-IS (if enabled)
                                                  > > ; If you want to digi on same port, but not send to APRS-IS, Specify
                                                  > Digimap
                                                  > > n=n
                                                  > > ; If you dont want to digi on a port, specify Digimap n=
                                                  > > ;
                                                  > > ; If you only have one APRS port, you probably don't need a Digimap
                                                  > > statement
                                                  > >
                                                  > > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
                                                  > > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
                                                  > > ;Digimap 9= ; Don't digi packets received on port 9
                                                  > >
                                                  > > ; Define Digipeating parameters
                                                  > >
                                                  > > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
                                                  > > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
                                                  > > DigiCalls=SKIG ; Calls for Normal (ie no SSID manipulation) Digi
                                                  > > ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave out
                                                  > > TraceCalls and FloodCalls
                                                  > >
                                                  > > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the
                                                  > > call to be left as it is received.
                                                  > >
                                                  > > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is
                                                  > > received with n greater than
                                                  > > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is
                                                  > decremented.
                                                  > >
                                                  > > ; Specify position. You can specify a fixed LAT/LONG, or use GPS
                                                  > >
                                                  > > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
                                                  > > LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)
                                                  > >
                                                  > > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
                                                  > > GPSSpeed=0 ; overriding the values set above.
                                                  > >
                                                  > > ; The Digi can generate Object and Item reports.
                                                  > >
                                                  > > ; The format is pretty strict - a single space between param=value
                                                  pairs,
                                                  > > ; a comma but no spaces in PATH and PORT string.
                                                  > >
                                                  > > ; Minimum interval is 10 mins. You can have as many OBJECT lines as you
                                                  > > need.
                                                  > > ; See thr APRS specification for information on how to format an Object
                                                  or
                                                  > > Item string.
                                                  > >
                                                  > > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
                                                  > > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
                                                  > >
                                                  > > ; IGATE Params. If specified you will gate RF packets and your beacons
                                                  to
                                                  > > APRS-IS
                                                  > >
                                                  > > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an IPV6
                                                  > Host
                                                  > > ISPort=10152 ; Normal port for a filtered feed
                                                  > > ISPasscode=17580 ; If you don't already have a passcode I can issue you
                                                  > one.
                                                  > > ;
                                                  > > ; You can specify a filter command to be sent when you log on to
                                                  APRS-IS.
                                                  > > Normally you don't
                                                  > > ; need one. The APRS Mapping Application (BPQAPRS) sets a filter when it
                                                  > > starts,
                                                  > > ; and if you aren't running an APRS application, there isn't much point
                                                  in
                                                  > > getting info from APRS-IS
                                                  > > ;
                                                  > > ISFilter=m/50 ; Filter Command if needed
                                                  > >
                                                  > > ***
                                                  > > ;
                                                  > >
                                                  > > The problem is it is not connecting to the aprs server. I have tried
                                                  sever
                                                  > > servers and I run the one I am trying to connect to and it is working.
                                                  > > The second thing is the aprs pages I felt needed to be in a folder
                                                  'aprs'
                                                  > > but would not work page not found it appears anything in the root works
                                                  > but
                                                  > > not in a folder.
                                                  > >
                                                  > > do I have something wrong or am I missing something.
                                                  > >
                                                  > > Stephen
                                                  > >
                                                  >

                                                   

                                                  -- 
                                                    
                                                  K.O. Higgs 
                                                  n0kfq@...
                                                    

                                                   

                                                   

                                                  -- 
                                                    
                                                  K.O. Higgs 
                                                  n0kfq@...
                                                    

                                                   

                                                   

                                                  -- 
                                                    
                                                  K.O. Higgs 
                                                  n0kfq@...
                                                    

                                                   

                                                   

                                                • Daryll Webb
                                                  Thanks will do ________________________________ From: Jerry To: BPQ32@yahoogroups.com Sent: Monday, June 11, 2012 4:05 PM Subject: RE:
                                                  Message 25 of 30 , Jun 11, 2012
                                                    Thanks will do


                                                    From: Jerry <n9lya@...>
                                                    To: BPQ32@yahoogroups.com
                                                    Sent: Monday, June 11, 2012 4:05 PM
                                                    Subject: RE: [BPQ32] Re: Problem BPQ 32 windows

                                                     
                                                    Use Startupdelayer your best option and its FREE…. DO a Search for Startupdelayer…   73 jk
                                                     
                                                    From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Daryll Webb
                                                    Sent: Monday, June 11, 2012 4:51 PM
                                                    To: BPQ32@yahoogroups.com
                                                    Subject: Re: [BPQ32] Re: Problem BPQ 32 windows
                                                     
                                                     
                                                    My console looks good but my mail/chat is my trouble. I came home from work and mail/chat 1.4.51.1 had crashed and windows needed to close it. I did and the hole bpq program closed as well, no pc reboot jest restart bpq and working ok now.
                                                    Bpq ran all day yesterday and last night about 20 hours  then 8 hours later after work it stopped. 
                                                    My console window works grate. It holds the monitor window and the sub windows r stream, telnet, bpq32dll.
                                                    I like it.  My mail/chat don't start with bpq and I need to start it after the main program starts.
                                                    Is there a way to have mail/chat and aprs start as bpq starts? Can I put mail/chat and aprs in the start folder in windows? One click and we r off.
                                                    Buster kg9nd
                                                     

                                                    From: K.O. Higgs <n0kfq@...>
                                                    To: BPQ32@yahoogroups.com
                                                    Sent: Monday, June 11, 2012 11:14 AM
                                                    Subject: Re: [BPQ32] Re: Problem BPQ 32 windows
                                                     
                                                     
                                                    Oooops! Sorry...

                                                    K.O.
                                                    On 6/11/2012 10:56 AM, Joel Yates wrote:
                                                     
                                                    That was in response to the header line problem...73's Joel N4JOA
                                                    Sent via BlackBerry from T-Mobile

                                                    From: "K.O. Higgs" <n0kfq@...>
                                                    Date: Mon, 11 Jun 2012 10:48:37 -0500
                                                    Subject: Re: [BPQ32] Re: Problem BPQ 32 windows
                                                     
                                                    Will try that... but don't see how that will fix the problem about having to re-boot the
                                                    computer when BPQ fails..

                                                    K.O.
                                                    On 6/11/2012 10:44 AM, Joel Yates wrote:
                                                     
                                                    Tell it to cascade the windows and then reposition them.
                                                    ...73's Joel N4JOA
                                                    Sent via BlackBerry from T-Mobile

                                                    From: "K.O. Higgs" <n0kfq@...>
                                                    Date: Mon, 11 Jun 2012 10:33:31 -0500
                                                    Subject: Re: [BPQ32] Re: Problem BPQ 32 windows
                                                     
                                                    I am running the same Windows system and am having the same problem.

                                                    K.O. n0kfq
                                                    On 6/11/2012 10:16 AM, Mike Melnik wrote:
                                                     
                                                    Mike

                                                    Send me your bpq32.cfg

                                                    Mike-N9PMO
                                                    www.n9pmo.com
                                                    mmelnik1@...

                                                    -----Original Message-----
                                                    From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                                    Michael Mullikin
                                                    Sent: Monday, June 11, 2012 8:53 AM
                                                    To: BPQ32@yahoogroups.com
                                                    Subject: RE: [BPQ32] Re: Problem BPQ 32 windows

                                                     
                                                    Hi John
                                                    I seem to have a problem with BPQ32 Window.  I notice your picture of Bpq
                                                    dll consol
                                                    Shows a top line identifying the window.  When BPQ runs the only top line on
                                                    the windows is the BPQ consol None of the other windows show the header
                                                    line.  Also if I click the minimize button on the BPQ consol it disappears
                                                    in to computer land.  I cant  find it and cant bring it back up.  I have to
                                                    shut down the program and restart it to get it to come back.  I am using
                                                    widows XP PRO service pack 3.  I  there a setting I need to adjust???
                                                     
                                                    Thank You 
                                                    Mike  W8EHH

                                                    From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of John
                                                    Wiseman
                                                    Sent: Sunday, June 10, 2012 1:16 PM
                                                    To: BPQ32@yahoogroups.com
                                                    Subject: RE: [BPQ32] Re: Problem with APRS and Web Pages
                                                     
                                                     
                                                    Stephen
                                                     
                                                    You should have something like
                                                     

                                                     
                                                    If the Igate line isn’t there, then something very odd is going on – it
                                                    suggests the APRS config was rejected, but it that case there should be
                                                    error messages in the console window.
                                                     
                                                    Did you get “APRS Digi/Gateway Enabled” on the console window (after the
                                                    “Initialising Port… “ messages)?
                                                     
                                                    73
                                                    John
                                                     

                                                    From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                                    STEPHEN
                                                    Sent: 10 June 2012 17:57
                                                    To: BPQ32@yahoogroups.com
                                                    Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                                     
                                                     
                                                    John
                                                    we are getting closer
                                                    The aprs pages are working but I still will not connect to the APRS server
                                                    You stated "Check that the "Enable Igate" checkbox on the bpq32.dll console
                                                    window is checked."

                                                    I don't see a Enable Igate on the bpq32.dll window?

                                                    I also changed the server as Mike stated.

                                                    Thanks

                                                    --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
                                                    >
                                                    > Stephen,
                                                    >
                                                    >
                                                    >
                                                    > http://www.ve9sc.com:84/allrf.html isn't really working. The HTML is
                                                    > returned, but the APRS data isn't being placed in the page. This suggests
                                                    to
                                                    > me that you have the APRS pages in BPQ32/HTML, not BPQ32/BPQAPRS/HTML.
                                                    >
                                                    >
                                                    >
                                                    > Check that the "Enable Igate" checkbox on the bpq32.dll console window is
                                                    > checked. It should be set by default, but if it gets unset, the code won't
                                                    > connect.
                                                    >
                                                    >
                                                    >
                                                    > I don't know why MailChat is giving a program error in Socket Data every
                                                    10
                                                    > minutes, but this isn't related to the Web Server - it is most likely the
                                                    > POP3 server trying to retrieve a message, and being upset by what it gets.
                                                    > The LOG_TCP.txt file may give a clue as to what is going on.
                                                    >
                                                    >
                                                    >
                                                    > 73,
                                                    >
                                                    > John
                                                    >
                                                    >
                                                    >
                                                    >
                                                    >
                                                    >
                                                    >
                                                    >
                                                    >
                                                    > _____
                                                    >
                                                    > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                                    > STEPHEN
                                                    > Sent: 10 June 2012 16:46
                                                    > To: BPQ32@yahoogroups.com
                                                    > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                                    >
                                                    >
                                                    >
                                                    >
                                                    >
                                                    > John
                                                    >
                                                    > I am running javAPRSSrvr 3.15b08 that should be fine.
                                                    > http://www.ve9sc.com:14501/
                                                    >
                                                    > I know this works as i looked at Jerry's
                                                    > http://w9bbs.no-ip.org:8080/ and it is working.
                                                    >
                                                    > I comment out FloodCalls, DigiCalls, and OBJECT statementsas you stated.
                                                    >
                                                    > Restarted BPQ and it still will not connect to the aprs server. I tried
                                                    > other servers but they will not work either. I tried:
                                                    >
                                                    > The Main APRS servers "First" & "Second" etc.
                                                    >
                                                    > The console screen is fine no errors. It states :
                                                    >
                                                    > APRS/Digi/Gateway Enabled
                                                    >
                                                    > I have all the html file in the html folder no subfolders the link
                                                    >
                                                    > http://www.ve9sc.com:84/Node/Routes.html
                                                    >
                                                    > try the aprs link it will not work nor will that link "APRS" from any of
                                                    the
                                                    > node pages.
                                                    >
                                                    > But http://www.ve9sc.com:84/allrf.html works if appears the link is adding
                                                    a
                                                    > folder aprs.
                                                    > http://www.ve9sc.com:84/aprs/all.html
                                                    >
                                                    > I looked at the debug log
                                                    >
                                                    > 120610 00:00:02 ! |Enter HouseKeeping
                                                    > 120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 02:07:37 ! Too Many Program Errors - Closing
                                                    > 120610 02:07:37 ! Attempting to Restart C:\Program
                                                    > Files\BPQ32\BPQMailChat.exe
                                                    > 120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to
                                                    HouseKeeping
                                                    > 78674
                                                    > 120610 02:08:46 ! Program Starting
                                                    > 120610 02:08:46 ! BPQMailChat Starting
                                                    > 120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 06:23:18 ! Too Many Program Errors - Closing
                                                    > 120610 06:23:18 ! Attempting to Restart C:\Program
                                                    > Files\BPQ32\BPQMailChat.exe
                                                    > 120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to
                                                    HouseKeeping
                                                    > 63324
                                                    > 120610 06:24:36 ! Program Starting
                                                    > 120610 06:24:36 ! BPQMailChat Starting
                                                    > 120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 10:39:05 ! Too Many Program Errors - Closing
                                                    > 120610 10:39:05 ! Attempting to Restart C:\Program
                                                    > Files\BPQ32\BPQMailChat.exe
                                                    > 120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to
                                                    HouseKeeping
                                                    > 47986
                                                    > 120610 10:40:14 ! Program Starting
                                                    > 120610 10:40:14 ! BPQMailChat Starting
                                                    > 120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 14:54:44 ! Too Many Program Errors - Closing
                                                    > 120610 14:54:44 ! Attempting to Restart C:\Program
                                                    > Files\BPQ32\BPQMailChat.exe
                                                    > 120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to
                                                    HouseKeeping
                                                    > 32644
                                                    > 120610 14:55:56 ! Program Starting
                                                    > 120610 14:55:56 ! BPQMailChat Starting
                                                    > 120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    > 120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                    > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                    >
                                                    > I am not sure where to go from here.
                                                    >
                                                    > Stephen
                                                    >
                                                    > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "John
                                                    > Wiseman" <john.wiseman@> wrote:
                                                    > >
                                                    > > Stephen,
                                                    > >
                                                    > >
                                                    > >
                                                    > > You should probably comment out or change the FloodCalls, DigiCalls, and
                                                    > > OBJECT statements.
                                                    > >
                                                    > >
                                                    > >
                                                    > > Usually the ISHOST is an APRS-IS server, but if the server you are
                                                    running
                                                    > > locally emulates an IS server, that should be ok. Do you get any error
                                                    > > message on the console screen when you load bpa32?
                                                    > >
                                                    > >
                                                    > >
                                                    > > The APRS page templates should be directly in folder BPQAPRS/HTML - not
                                                    a
                                                    > > subfolder, under your BPQ32 config folder.
                                                    > >
                                                    > >
                                                    > >
                                                    > > 73,
                                                    > >
                                                    > > John
                                                    > >
                                                    > >
                                                    > >
                                                    > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                                    > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                                                    > Of
                                                    > > STEPHEN
                                                    > > Sent: 10 June 2012 15:52
                                                    > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                                    > > Subject: [BPQ32] Problem with APRS and Web Pages
                                                    > >
                                                    > >
                                                    > >
                                                    > >
                                                    > >
                                                    > > I did the last install all worked fine with the install. I added the
                                                    html
                                                    > > and aprs web pages. But the aprs seems to be not working.
                                                    > >
                                                    > > I added the following from example to the script:
                                                    > >
                                                    > > APRSDIGI
                                                    > >
                                                    > > APRSCall VE1MPF-10
                                                    > > StatusMsg=BPQ32 IGate Moncton, New Brunswick, Canada
                                                    > >
                                                    > > Symbol=a ; Icon to display for station.
                                                    > > Symset=B ; This is a "B" in a Red Diamond.
                                                    > >
                                                    > > ;
                                                    > > ; Specify a Dest Addreess and Path for each port you want to use for
                                                    APRS.
                                                    > > No dest means receive only port
                                                    > > ; Ports without an APRSPath statement will not be used by the Digi
                                                    > > ;
                                                    > > ; Note if you specify APRS as the destination call it will be replaced
                                                    by
                                                    > > the current BPQ32 APRS
                                                    > > ; identification destination - APBPQ1. If you really want to send APRS,
                                                    > > specify APRS-0.
                                                    > >
                                                    > > APRSPath 1= ; Receive only port
                                                    > > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
                                                    > > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
                                                    > >
                                                    > > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
                                                    > > MobileBeaconInterval=2 ; Beacon interval when moving
                                                    > >
                                                    > > ; Define Crossport Digi. For each port, a list of ports to send a packet
                                                    > to
                                                    > > (IS means send to APRS-IS)
                                                    > > ; If a Digimap isn't specified for a port, digi out on the port the
                                                    packet
                                                    > > arrived on,
                                                    > > ; and send to APRS-IS (if enabled)
                                                    > > ; If you want to digi on same port, but not send to APRS-IS, Specify
                                                    > Digimap
                                                    > > n=n
                                                    > > ; If you dont want to digi on a port, specify Digimap n=
                                                    > > ;
                                                    > > ; If you only have one APRS port, you probably don't need a Digimap
                                                    > > statement
                                                    > >
                                                    > > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
                                                    > > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
                                                    > > ;Digimap 9= ; Don't digi packets received on port 9
                                                    > >
                                                    > > ; Define Digipeating parameters
                                                    > >
                                                    > > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
                                                    > > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
                                                    > > DigiCalls=SKIG ; Calls for Normal (ie no SSID manipulation) Digi
                                                    > > ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave out
                                                    > > TraceCalls and FloodCalls
                                                    > >
                                                    > > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the
                                                    > > call to be left as it is received.
                                                    > >
                                                    > > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is
                                                    > > received with n greater than
                                                    > > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is
                                                    > decremented.
                                                    > >
                                                    > > ; Specify position. You can specify a fixed LAT/LONG, or use GPS
                                                    > >
                                                    > > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
                                                    > > LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)
                                                    > >
                                                    > > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
                                                    > > GPSSpeed=0 ; overriding the values set above.
                                                    > >
                                                    > > ; The Digi can generate Object and Item reports.
                                                    > >
                                                    > > ; The format is pretty strict - a single space between param=value
                                                    pairs,
                                                    > > ; a comma but no spaces in PATH and PORT string.
                                                    > >
                                                    > > ; Minimum interval is 10 mins. You can have as many OBJECT lines as you
                                                    > > need.
                                                    > > ; See thr APRS specification for information on how to format an Object
                                                    or
                                                    > > Item string.
                                                    > >
                                                    > > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
                                                    > > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
                                                    > >
                                                    > > ; IGATE Params. If specified you will gate RF packets and your beacons
                                                    to
                                                    > > APRS-IS
                                                    > >
                                                    > > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an IPV6
                                                    > Host
                                                    > > ISPort=10152 ; Normal port for a filtered feed
                                                    > > ISPasscode=17580 ; If you don't already have a passcode I can issue you
                                                    > one.
                                                    > > ;
                                                    > > ; You can specify a filter command to be sent when you log on to
                                                    APRS-IS.
                                                    > > Normally you don't
                                                    > > ; need one. The APRS Mapping Application (BPQAPRS) sets a filter when it
                                                    > > starts,
                                                    > > ; and if you aren't running an APRS application, there isn't much point
                                                    in
                                                    > > getting info from APRS-IS
                                                    > > ;
                                                    > > ISFilter=m/50 ; Filter Command if needed
                                                    > >
                                                    > > ***
                                                    > > ;
                                                    > >
                                                    > > The problem is it is not connecting to the aprs server. I have tried
                                                    sever
                                                    > > servers and I run the one I am trying to connect to and it is working.
                                                    > > The second thing is the aprs pages I felt needed to be in a folder
                                                    'aprs'
                                                    > > but would not work page not found it appears anything in the root works
                                                    > but
                                                    > > not in a folder.
                                                    > >
                                                    > > do I have something wrong or am I missing something.
                                                    > >
                                                    > > Stephen
                                                    > >
                                                    >
                                                     
                                                    -- 
                                                      
                                                    K.O. Higgs 
                                                    n0kfq@...
                                                      
                                                     
                                                     
                                                    -- 
                                                      
                                                    K.O. Higgs 
                                                    n0kfq@...
                                                      
                                                     
                                                     
                                                    -- 
                                                      
                                                    K.O. Higgs 
                                                    n0kfq@...
                                                      
                                                     
                                                     


                                                  • Mike Melnik
                                                    Looks very nice Ken, Mine is not 100% complete yet http://n9pmo.dyndns.org:81 also have a link on my Web site. 73 Mike-N9PMO www.n9pmo.com ... From:
                                                    Message 26 of 30 , Jun 12, 2012
                                                      Looks very nice Ken,
                                                      Mine is not 100% complete yet http://n9pmo.dyndns.org:81 also have a link on
                                                      my
                                                      Web site.

                                                      73

                                                      Mike-N9PMO
                                                      www.n9pmo.com
                                                      -----Original Message-----
                                                      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of ken
                                                      Sent: Sunday, June 10, 2012 4:23 PM
                                                      To: BPQ32@yahoogroups.com
                                                      Subject: Re: [BPQ32] Re: Problem with APRS and Web Pages

                                                       

                                                      Hi John
                                                      I have my web server pages working.
                                                      http://gb7cow.dyndns.org:5080
                                                      only think it does not do for some reason is look up the station
                                                      ie: http://gb7cow.dyndns.org:5080/aprs/find.cgi?call=EI7IG
                                                      all i am getting from Gerhards (F5VAG) server is a javascript error:  input
                                                      is not valid
                                                      I have the latest Java installed and the latest code from Gerhards Aprs
                                                      website

                                                      is it something i may have overlooked??
                                                      apart from the above all is working well.

                                                      73 de Ken
                                                      g7vja
                                                      gb7cow-3



                                                      On 10/06/12 20:01, John Wiseman wrote:
                                                       
                                                      The Node display pages are coded in the software. You can’t change them,
                                                      except to add a background image.
                                                       
                                                      Only the index files – index.html, indexnoaprs.html and nodemenu.html can be
                                                      changed.
                                                       
                                                      John
                                                       

                                                      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                                      STEPHEN
                                                      Sent: 10 June 2012 19:54
                                                      To: BPQ32@yahoogroups.com
                                                      Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                                       
                                                       

                                                      John
                                                      The Node/Nodes.html etc files to edit them where are they located?

                                                      I can not seem to find them.

                                                      It seems to be working well now.

                                                      --- In BPQ32@yahoogroups.com, "STEPHEN" <ve1mpf@...> wrote:
                                                      >
                                                      > I did a re-install of the update, and a fresh re-boot. I see the check box
                                                      and it is working.
                                                      >
                                                      > Thanks
                                                      >
                                                      > --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@> wrote:
                                                      > >
                                                      > > Stephen
                                                      > >
                                                      > >
                                                      > >
                                                      > > You should have something like
                                                      > >
                                                      > >
                                                      > >
                                                      > >
                                                      > >
                                                      > >
                                                      > >
                                                      > > If the Igate line isn't there, then something very odd is going on - it
                                                      > > suggests the APRS config was rejected, but it that case there should be
                                                      > > error messages in the console window.
                                                      > >
                                                      > >
                                                      > >
                                                      > > Did you get "APRS Digi/Gateway Enabled" on the console window (after the
                                                      > > "Initialising Port. " messages)?
                                                      > >
                                                      > >
                                                      > >
                                                      > > 73
                                                      > >
                                                      > > John
                                                      > >
                                                      > >
                                                      > >
                                                      > > _____
                                                      > >
                                                      > > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                                      > > STEPHEN
                                                      > > Sent: 10 June 2012 17:57
                                                      > > To: BPQ32@yahoogroups.com
                                                      > > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                                      > >
                                                      > >
                                                      > >
                                                      > >
                                                      > >
                                                      > > John
                                                      > > we are getting closer
                                                      > > The aprs pages are working but I still will not connect to the APRS
                                                      server
                                                      > > You stated "Check that the "Enable Igate" checkbox on the bpq32.dll
                                                      console
                                                      > > window is checked."
                                                      > >
                                                      > > I don't see a Enable Igate on the bpq32.dll window?
                                                      > >
                                                      > > I also changed the server as Mike stated.
                                                      > >
                                                      > > Thanks
                                                      > >
                                                      > > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "John
                                                      > > Wiseman" <john.wiseman@> wrote:
                                                      > > >
                                                      > > > Stephen,
                                                      > > >
                                                      > > >
                                                      > > >
                                                      > > > http://www.ve9sc.com:84/allrf.html isn't really working. The HTML is
                                                      > > > returned, but the APRS data isn't being placed in the page. This
                                                      suggests
                                                      > > to
                                                      > > > me that you have the APRS pages in BPQ32/HTML, not BPQ32/BPQAPRS/HTML.

                                                      > > >
                                                      > > >
                                                      > > >
                                                      > > > Check that the "Enable Igate" checkbox on the bpq32.dll console window
                                                      is
                                                      > > > checked. It should be set by default, but if it gets unset, the code
                                                      won't
                                                      > > > connect.
                                                      > > >
                                                      > > >
                                                      > > >
                                                      > > > I don't know why MailChat is giving a program error in Socket Data
                                                      every
                                                      > > 10
                                                      > > > minutes, but this isn't related to the Web Server - it is most likely
                                                      the
                                                      > > > POP3 server trying to retrieve a message, and being upset by what it
                                                      gets.
                                                      > > > The LOG_TCP.txt file may give a clue as to what is going on.
                                                      > > >
                                                      > > >
                                                      > > >
                                                      > > > 73,
                                                      > > >
                                                      > > > John
                                                      > > >
                                                      > > >
                                                      > > >
                                                      > > >
                                                      > > >
                                                      > > >
                                                      > > >
                                                      > > >
                                                      > > >
                                                      > > > _____
                                                      > > >
                                                      > > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                                      > > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On
                                                      Behalf
                                                      > > Of
                                                      > > > STEPHEN
                                                      > > > Sent: 10 June 2012 16:46
                                                      > > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                                      > > > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                                      > > >
                                                      > > >
                                                      > > >
                                                      > > >
                                                      > > >
                                                      > > > John
                                                      > > >
                                                      > > > I am running javAPRSSrvr 3.15b08 that should be fine.
                                                      > > > http://www.ve9sc.com:14501/
                                                      > > >
                                                      > > > I know this works as i looked at Jerry's
                                                      > > > http://w9bbs.no-ip.org:8080/ and it is working.
                                                      > > >
                                                      > > > I comment out FloodCalls, DigiCalls, and OBJECT statementsas you
                                                      stated.
                                                      > > >
                                                      > > > Restarted BPQ and it still will not connect to the aprs server. I
                                                      tried
                                                      > > > other servers but they will not work either. I tried:
                                                      > > >
                                                      > > > The Main APRS servers "First" & "Second" etc.
                                                      > > >
                                                      > > > The console screen is fine no errors. It states :
                                                      > > >
                                                      > > > APRS/Digi/Gateway Enabled
                                                      > > >
                                                      > > > I have all the html file in the html folder no subfolders the link
                                                      > > >
                                                      > > > http://www.ve9sc.com:84/Node/Routes.html
                                                      > > >
                                                      > > > try the aprs link it will not work nor will that link "APRS" from any
                                                      of
                                                      > > the
                                                      > > > node pages.
                                                      > > >
                                                      > > > But http://www.ve9sc.com:84/allrf.html works if appears the link is
                                                      adding
                                                      > > a
                                                      > > > folder aprs.
                                                      > > > http://www.ve9sc.com:84/aprs/all.html
                                                      > > >
                                                      > > > I looked at the debug log
                                                      > > >
                                                      > > > 120610 00:00:02 ! |Enter HouseKeeping
                                                      > > > 120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 02:07:37 ! Too Many Program Errors - Closing
                                                      > > > 120610 02:07:37 ! Attempting to Restart C:\Program
                                                      > > > Files\BPQ32\BPQMailChat.exe
                                                      > > > 120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to
                                                      > > HouseKeeping
                                                      > > > 78674
                                                      > > > 120610 02:08:46 ! Program Starting
                                                      > > > 120610 02:08:46 ! BPQMailChat Starting
                                                      > > > 120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 06:23:18 ! Too Many Program Errors - Closing
                                                      > > > 120610 06:23:18 ! Attempting to Restart C:\Program
                                                      > > > Files\BPQ32\BPQMailChat.exe
                                                      > > > 120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to
                                                      > > HouseKeeping
                                                      > > > 63324
                                                      > > > 120610 06:24:36 ! Program Starting
                                                      > > > 120610 06:24:36 ! BPQMailChat Starting
                                                      > > > 120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 10:39:05 ! Too Many Program Errors - Closing
                                                      > > > 120610 10:39:05 ! Attempting to Restart C:\Program
                                                      > > > Files\BPQ32\BPQMailChat.exe
                                                      > > > 120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to
                                                      > > HouseKeeping
                                                      > > > 47986
                                                      > > > 120610 10:40:14 ! Program Starting
                                                      > > > 120610 10:40:14 ! BPQMailChat Starting
                                                      > > > 120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 14:54:44 ! Too Many Program Errors - Closing
                                                      > > > 120610 14:54:44 ! Attempting to Restart C:\Program
                                                      > > > Files\BPQ32\BPQMailChat.exe
                                                      > > > 120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to
                                                      > > HouseKeeping
                                                      > > > 32644
                                                      > > > 120610 14:55:56 ! Program Starting
                                                      > > > 120610 14:55:56 ! BPQMailChat Starting
                                                      > > > 120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > > 120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                      > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                      > > >
                                                      > > > I am not sure where to go from here.
                                                      > > >
                                                      > > > Stephen
                                                      > > >
                                                      > > > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                                      > > <mailto:BPQ32%40yahoogroups.com> , "John
                                                      > > > Wiseman" <john.wiseman@> wrote:
                                                      > > > >
                                                      > > > > Stephen,
                                                      > > > >
                                                      > > > >
                                                      > > > >
                                                      > > > > You should probably comment out or change the FloodCalls, DigiCalls,
                                                      and
                                                      > > > > OBJECT statements.
                                                      > > > >
                                                      > > > >
                                                      > > > >
                                                      > > > > Usually the ISHOST is an APRS-IS server, but if the server you are
                                                      > > running
                                                      > > > > locally emulates an IS server, that should be ok. Do you get any
                                                      error
                                                      > > > > message on the console screen when you load bpa32?
                                                      > > > >
                                                      > > > >
                                                      > > > >
                                                      > > > > The APRS page templates should be directly in folder BPQAPRS/HTML -
                                                      not
                                                      > > a
                                                      > > > > subfolder, under your BPQ32 config folder.
                                                      > > > >
                                                      > > > >
                                                      > > > >
                                                      > > > > 73,
                                                      > > > >
                                                      > > > > John
                                                      > > > >
                                                      > > > >
                                                      > > > >
                                                      > > > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                                      > > <mailto:BPQ32%40yahoogroups.com>
                                                      > > > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                                      > > <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                                                      > > > Of
                                                      > > > > STEPHEN
                                                      > > > > Sent: 10 June 2012 15:52
                                                      > > > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                                      > > <mailto:BPQ32%40yahoogroups.com>
                                                      > > > > Subject: [BPQ32] Problem with APRS and Web Pages
                                                      > > > >
                                                      > > > >
                                                      > > > >
                                                      > > > >
                                                      > > > >
                                                      > > > > I did the last install all worked fine with the install. I added the
                                                      > > html
                                                      > > > > and aprs web pages. But the aprs seems to be not working.
                                                      > > > >
                                                      > > > > I added the following from example to the script:
                                                      > > > >
                                                      > > > > APRSDIGI
                                                      > > > >
                                                      > > > > APRSCall VE1MPF-10
                                                      > > > > StatusMsg=BPQ32 IGate Moncton, New Brunswick, Canada
                                                      > > > >
                                                      > > > > Symbol=a ; Icon to display for station.
                                                      > > > > Symset=B ; This is a "B" in a Red Diamond.
                                                      > > > >
                                                      > > > > ;
                                                      > > > > ; Specify a Dest Addreess and Path for each port you want to use for
                                                      > > APRS.
                                                      > > > > No dest means receive only port
                                                      > > > > ; Ports without an APRSPath statement will not be used by the Digi
                                                      > > > > ;
                                                      > > > > ; Note if you specify APRS as the destination call it will be
                                                      replaced
                                                      > > by
                                                      > > > > the current BPQ32 APRS
                                                      > > > > ; identification destination - APBPQ1. If you really want to send
                                                      APRS,
                                                      > > > > specify APRS-0.
                                                      > > > >
                                                      > > > > APRSPath 1= ; Receive only port
                                                      > > > > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
                                                      > > > > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
                                                      > > > >
                                                      > > > > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
                                                      > > > > MobileBeaconInterval=2 ; Beacon interval when moving
                                                      > > > >
                                                      > > > > ; Define Crossport Digi. For each port, a list of ports to send a
                                                      packet
                                                      > > > to
                                                      > > > > (IS means send to APRS-IS)
                                                      > > > > ; If a Digimap isn't specified for a port, digi out on the port the
                                                      > > packet
                                                      > > > > arrived on,
                                                      > > > > ; and send to APRS-IS (if enabled)
                                                      > > > > ; If you want to digi on same port, but not send to APRS-IS, Specify
                                                      > > > Digimap
                                                      > > > > n=n
                                                      > > > > ; If you dont want to digi on a port, specify Digimap n=
                                                      > > > > ;
                                                      > > > > ; If you only have one APRS port, you probably don't need a Digimap
                                                      > > > > statement
                                                      > > > >
                                                      > > > > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
                                                      > > > > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
                                                      > > > > ;Digimap 9= ; Don't digi packets received on port 9
                                                      > > > >
                                                      > > > > ; Define Digipeating parameters
                                                      > > > >
                                                      > > > > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
                                                      > > > > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
                                                      > > > > DigiCalls=SKIG ; Calls for Normal (ie no SSID manipulation) Digi
                                                      > > > > ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave out
                                                      > > > > TraceCalls and FloodCalls
                                                      > > > >
                                                      > > > > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want
                                                      the
                                                      > > > > call to be left as it is received.
                                                      > > > >
                                                      > > > > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet
                                                      is
                                                      > > > > received with n greater than
                                                      > > > > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is
                                                      > > > decremented.
                                                      > > > >
                                                      > > > > ; Specify position. You can specify a fixed LAT/LONG, or use GPS
                                                      > > > >
                                                      > > > > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
                                                      > > > > LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)
                                                      > > > >
                                                      > > > > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
                                                      > > > > GPSSpeed=0 ; overriding the values set above.
                                                      > > > >
                                                      > > > > ; The Digi can generate Object and Item reports.
                                                      > > > >
                                                      > > > > ; The format is pretty strict - a single space between param=value
                                                      > > pairs,
                                                      > > > > ; a comma but no spaces in PATH and PORT string.
                                                      > > > >
                                                      > > > > ; Minimum interval is 10 mins. You can have as many OBJECT lines as
                                                      you
                                                      > > > > need.
                                                      > > > > ; See thr APRS specification for information on how to format an
                                                      Object
                                                      > > or
                                                      > > > > Item string.
                                                      > > > >
                                                      > > > > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
                                                      > > > > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
                                                      > > > >
                                                      > > > > ; IGATE Params. If specified you will gate RF packets and your
                                                      beacons
                                                      > > to
                                                      > > > > APRS-IS
                                                      > > > >
                                                      > > > > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an
                                                      IPV6
                                                      > > > Host
                                                      > > > > ISPort=10152 ; Normal port for a filtered feed
                                                      > > > > ISPasscode=17580 ; If you don't already have a passcode I can issue
                                                      you
                                                      > > > one.
                                                      > > > > ;
                                                      > > > > ; You can specify a filter command to be sent when you log on to
                                                      > > APRS-IS.
                                                      > > > > Normally you don't
                                                      > > > > ; need one. The APRS Mapping Application (BPQAPRS) sets a filter
                                                      when it
                                                      > > > > starts,
                                                      > > > > ; and if you aren't running an APRS application, there isn't much
                                                      point
                                                      > > in
                                                      > > > > getting info from APRS-IS
                                                      > > > > ;
                                                      > > > > ISFilter=m/50 ; Filter Command if needed
                                                      > > > >
                                                      > > > > ***
                                                      > > > > ;
                                                      > > > >
                                                      > > > > The problem is it is not connecting to the aprs server. I have tried
                                                      > > sever
                                                      > > > > servers and I run the one I am trying to connect to and it is
                                                      working.
                                                      > > > > The second thing is the aprs pages I felt needed to be in a folder
                                                      > > 'aprs'
                                                      > > > > but would not work page not found it appears anything in the root
                                                      works
                                                      > > > but
                                                      > > > > not in a folder.
                                                      > > > >
                                                      > > > > do I have something wrong or am I missing something.
                                                      > > > >
                                                      > > > > Stephen
                                                      > > > >
                                                      > > >
                                                      > >
                                                      >

                                                      --
                                                      Message sent via Ubuntu 11.04 & ThunderBird
                                                    • ken
                                                      Hi Mike yours is looking good as well.i have a bit of tweaking to do. Index.html wont change it keeps coming up on the white screen?? only want to add a
                                                      Message 27 of 30 , Jun 12, 2012
                                                        Hi Mike
                                                        yours is looking good as well.i have a bit of tweaking to do.
                                                        Index.html wont change it keeps coming up on the white screen??
                                                        only want to add a background picture.

                                                        73 de Ken
                                                        g7vja - gb7cow-3

                                                        On 12/06/12 17:27, Mike Melnik wrote:  

                                                        Looks very nice Ken,
                                                        Mine is not 100% complete yet http://n9pmo.dyndns.org:81 also have a link on
                                                        my
                                                        Web site.

                                                        73

                                                        Mike-N9PMO
                                                        www.n9pmo.com
                                                        -----Original Message-----
                                                        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of ken
                                                        Sent: Sunday, June 10, 2012 4:23 PM
                                                        To: BPQ32@yahoogroups.com
                                                        Subject: Re: [BPQ32] Re: Problem with APRS and Web Pages

                                                         

                                                        Hi John
                                                        I have my web server pages working.
                                                        http://gb7cow.dyndns.org:5080
                                                        only think it does not do for some reason is look up the station
                                                        ie: http://gb7cow.dyndns.org:5080/aprs/find.cgi?call=EI7IG
                                                        all i am getting from Gerhards (F5VAG) server is a javascript error:  input
                                                        is not valid
                                                        I have the latest Java installed and the latest code from Gerhards Aprs
                                                        website

                                                        is it something i may have overlooked??
                                                        apart from the above all is working well.

                                                        73 de Ken
                                                        g7vja
                                                        gb7cow-3

                                                        On 10/06/12 20:01, John Wiseman wrote:
                                                         
                                                        The Node display pages are coded in the software. You can’t change them,
                                                        except to add a background image.
                                                         
                                                        Only the index files – index.html, indexnoaprs.html and nodemenu.html can be
                                                        changed.
                                                         
                                                        John
                                                         

                                                        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                                        STEPHEN
                                                        Sent: 10 June 2012 19:54
                                                        To: BPQ32@yahoogroups.com
                                                        Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                                         
                                                         

                                                        John
                                                        The Node/Nodes.html etc files to edit them where are they located?

                                                        I can not seem to find them.

                                                        It seems to be working well now.

                                                        --- In BPQ32@yahoogroups.com, "STEPHEN" <ve1mpf@...> wrote:
                                                        >
                                                        > I did a re-install of the update, and a fresh re-boot. I see the check box
                                                        and it is working.
                                                        >
                                                        > Thanks
                                                        >
                                                        > --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@> wrote:
                                                        > >
                                                        > > Stephen
                                                        > >
                                                        > >
                                                        > >
                                                        > > You should have something like
                                                        > >
                                                        > >
                                                        > >
                                                        > >
                                                        > >
                                                        > >
                                                        > >
                                                        > > If the Igate line isn't there, then something very odd is going on - it
                                                        > > suggests the APRS config was rejected, but it that case there should be
                                                        > > error messages in the console window.
                                                        > >
                                                        > >
                                                        > >
                                                        > > Did you get "APRS Digi/Gateway Enabled" on the console window (after the
                                                        > > "Initialising Port. " messages)?
                                                        > >
                                                        > >
                                                        > >
                                                        > > 73
                                                        > >
                                                        > > John
                                                        > >
                                                        > >
                                                        > >
                                                        > > _____
                                                        > >
                                                        > > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                                        > > STEPHEN
                                                        > > Sent: 10 June 2012 17:57
                                                        > > To: BPQ32@yahoogroups.com
                                                        > > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                                        > >
                                                        > >
                                                        > >
                                                        > >
                                                        > >
                                                        > > John
                                                        > > we are getting closer
                                                        > > The aprs pages are working but I still will not connect to the APRS
                                                        server
                                                        > > You stated "Check that the "Enable Igate" checkbox on the bpq32.dll
                                                        console
                                                        > > window is checked."
                                                        > >
                                                        > > I don't see a Enable Igate on the bpq32.dll window?
                                                        > >
                                                        > > I also changed the server as Mike stated.
                                                        > >
                                                        > > Thanks
                                                        > >
                                                        > > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "John
                                                        > > Wiseman" <john.wiseman@> wrote:
                                                        > > >
                                                        > > > Stephen,
                                                        > > >
                                                        > > >
                                                        > > >
                                                        > > > http://www.ve9sc.com:84/allrf.html isn't really working. The HTML is
                                                        > > > returned, but the APRS data isn't being placed in the page. This
                                                        suggests
                                                        > > to
                                                        > > > me that you have the APRS pages in BPQ32/HTML, not BPQ32/BPQAPRS/HTML.

                                                        > > >
                                                        > > >
                                                        > > >
                                                        > > > Check that the "Enable Igate" checkbox on the bpq32.dll console window
                                                        is
                                                        > > > checked. It should be set by default, but if it gets unset, the code
                                                        won't
                                                        > > > connect.
                                                        > > >
                                                        > > >
                                                        > > >
                                                        > > > I don't know why MailChat is giving a program error in Socket Data
                                                        every
                                                        > > 10
                                                        > > > minutes, but this isn't related to the Web Server - it is most likely
                                                        the
                                                        > > > POP3 server trying to retrieve a message, and being upset by what it
                                                        gets.
                                                        > > > The LOG_TCP.txt file may give a clue as to what is going on.
                                                        > > >
                                                        > > >
                                                        > > >
                                                        > > > 73,
                                                        > > >
                                                        > > > John
                                                        > > >
                                                        > > >
                                                        > > >
                                                        > > >
                                                        > > >
                                                        > > >
                                                        > > >
                                                        > > >
                                                        > > >
                                                        > > > _____
                                                        > > >
                                                        > > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                                        > > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On
                                                        Behalf
                                                        > > Of
                                                        > > > STEPHEN
                                                        > > > Sent: 10 June 2012 16:46
                                                        > > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                                        > > > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                                        > > >
                                                        > > >
                                                        > > >
                                                        > > >
                                                        > > >
                                                        > > > John
                                                        > > >
                                                        > > > I am running javAPRSSrvr 3.15b08 that should be fine.
                                                        > > > http://www.ve9sc.com:14501/
                                                        > > >
                                                        > > > I know this works as i looked at Jerry's
                                                        > > > http://w9bbs.no-ip.org:8080/ and it is working.
                                                        > > >
                                                        > > > I comment out FloodCalls, DigiCalls, and OBJECT statementsas you
                                                        stated.
                                                        > > >
                                                        > > > Restarted BPQ and it still will not connect to the aprs server. I
                                                        tried
                                                        > > > other servers but they will not work either. I tried:
                                                        > > >
                                                        > > > The Main APRS servers "First" & "Second" etc.
                                                        > > >
                                                        > > > The console screen is fine no errors. It states :
                                                        > > >
                                                        > > > APRS/Digi/Gateway Enabled
                                                        > > >
                                                        > > > I have all the html file in the html folder no subfolders the link
                                                        > > >
                                                        > > > http://www.ve9sc.com:84/Node/Routes.html
                                                        > > >
                                                        > > > try the aprs link it will not work nor will that link "APRS" from any
                                                        of
                                                        > > the
                                                        > > > node pages.
                                                        > > >
                                                        > > > But http://www.ve9sc.com:84/allrf.html works if appears the link is
                                                        adding
                                                        > > a
                                                        > > > folder aprs.
                                                        > > > http://www.ve9sc.com:84/aprs/all.html
                                                        > > >
                                                        > > > I looked at the debug log
                                                        > > >
                                                        > > > 120610 00:00:02 ! |Enter HouseKeeping
                                                        > > > 120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 02:07:37 ! Too Many Program Errors - Closing
                                                        > > > 120610 02:07:37 ! Attempting to Restart C:\Program
                                                        > > > Files\BPQ32\BPQMailChat.exe
                                                        > > > 120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to
                                                        > > HouseKeeping
                                                        > > > 78674
                                                        > > > 120610 02:08:46 ! Program Starting
                                                        > > > 120610 02:08:46 ! BPQMailChat Starting
                                                        > > > 120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 06:23:18 ! Too Many Program Errors - Closing
                                                        > > > 120610 06:23:18 ! Attempting to Restart C:\Program
                                                        > > > Files\BPQ32\BPQMailChat.exe
                                                        > > > 120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to
                                                        > > HouseKeeping
                                                        > > > 63324
                                                        > > > 120610 06:24:36 ! Program Starting
                                                        > > > 120610 06:24:36 ! BPQMailChat Starting
                                                        > > > 120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 10:39:05 ! Too Many Program Errors - Closing
                                                        > > > 120610 10:39:05 ! Attempting to Restart C:\Program
                                                        > > > Files\BPQ32\BPQMailChat.exe
                                                        > > > 120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to
                                                        > > HouseKeeping
                                                        > > > 47986
                                                        > > > 120610 10:40:14 ! Program Starting
                                                        > > > 120610 10:40:14 ! BPQMailChat Starting
                                                        > > > 120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 14:54:44 ! Too Many Program Errors - Closing
                                                        > > > 120610 14:54:44 ! Attempting to Restart C:\Program
                                                        > > > Files\BPQ32\BPQMailChat.exe
                                                        > > > 120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to
                                                        > > HouseKeeping
                                                        > > > 32644
                                                        > > > 120610 14:55:56 ! Program Starting
                                                        > > > 120610 14:55:56 ! BPQMailChat Starting
                                                        > > > 120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > > 120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                        > > > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                        > > >
                                                        > > > I am not sure where to go from here.
                                                        > > >
                                                        > > > Stephen
                                                        > > >
                                                        > > > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                                        > > <mailto:BPQ32%40yahoogroups.com> , "John
                                                        > > > Wiseman" <john.wiseman@> wrote:
                                                        > > > >
                                                        > > > > Stephen,
                                                        > > > >
                                                        > > > >
                                                        > > > >
                                                        > > > > You should probably comment out or change the FloodCalls, DigiCalls,
                                                        and
                                                        > > > > OBJECT statements.
                                                        > > > >
                                                        > > > >
                                                        > > > >
                                                        > > > > Usually the ISHOST is an APRS-IS server, but if the server you are
                                                        > > running
                                                        > > > > locally emulates an IS server, that should be ok. Do you get any
                                                        error
                                                        > > > > message on the console screen when you load bpa32?
                                                        > > > >
                                                        > > > >
                                                        > > > >
                                                        > > > > The APRS page templates should be directly in folder BPQAPRS/HTML -
                                                        not
                                                        > > a
                                                        > > > > subfolder, under your BPQ32 config folder.
                                                        > > > >
                                                        > > > >
                                                        > > > >
                                                        > > > > 73,
                                                        > > > >
                                                        > > > > John
                                                        > > > >
                                                        > > > >
                                                        > > > >
                                                        > > > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                                        > > <mailto:BPQ32%40yahoogroups.com>
                                                        > > > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                                        > > <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                                                        > > > Of
                                                        > > > > STEPHEN
                                                        > > > > Sent: 10 June 2012 15:52
                                                        > > > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                                        > > <mailto:BPQ32%40yahoogroups.com>
                                                        > > > > Subject: [BPQ32] Problem with APRS and Web Pages
                                                        > > > >
                                                        > > > >
                                                        > > > >
                                                        > > > >
                                                        > > > >
                                                        > > > > I did the last install all worked fine with the install. I added the
                                                        > > html
                                                        > > > > and aprs web pages. But the aprs seems to be not working.
                                                        > > > >
                                                        > > > > I added the following from example to the script:
                                                        > > > >
                                                        > > > > APRSDIGI
                                                        > > > >
                                                        > > > > APRSCall VE1MPF-10
                                                        > > > > StatusMsg=BPQ32 IGate Moncton, New Brunswick, Canada
                                                        > > > >
                                                        > > > > Symbol=a ; Icon to display for station.
                                                        > > > > Symset=B ; This is a "B" in a Red Diamond.
                                                        > > > >
                                                        > > > > ;
                                                        > > > > ; Specify a Dest Addreess and Path for each port you want to use for
                                                        > > APRS.
                                                        > > > > No dest means receive only port
                                                        > > > > ; Ports without an APRSPath statement will not be used by the Digi
                                                        > > > > ;
                                                        > > > > ; Note if you specify APRS as the destination call it will be
                                                        replaced
                                                        > > by
                                                        > > > > the current BPQ32 APRS
                                                        > > > > ; identification destination - APBPQ1. If you really want to send
                                                        APRS,
                                                        > > > > specify APRS-0.
                                                        > > > >
                                                        > > > > APRSPath 1= ; Receive only port
                                                        > > > > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
                                                        > > > > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
                                                        > > > >
                                                        > > > > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
                                                        > > > > MobileBeaconInterval=2 ; Beacon interval when moving
                                                        > > > >
                                                        > > > > ; Define Crossport Digi. For each port, a list of ports to send a
                                                        packet
                                                        > > > to
                                                        > > > > (IS means send to APRS-IS)
                                                        > > > > ; If a Digimap isn't specified for a port, digi out on the port the
                                                        > > packet
                                                        > > > > arrived on,
                                                        > > > > ; and send to APRS-IS (if enabled)
                                                        > > > > ; If you want to digi on same port, but not send to APRS-IS, Specify
                                                        > > > Digimap
                                                        > > > > n=n
                                                        > > > > ; If you dont want to digi on a port, specify Digimap n=
                                                        > > > > ;
                                                        > > > > ; If you only have one APRS port, you probably don't need a Digimap
                                                        > > > > statement
                                                        > > > >
                                                        > > > > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
                                                        > > > > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
                                                        > > > > ;Digimap 9= ; Don't digi packets received on port 9
                                                        > > > >
                                                        > > > > ; Define Digipeating parameters
                                                        > > > >
                                                        > > > > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
                                                        > > > > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
                                                        > > > > DigiCalls=SKIG ; Calls for Normal (ie no SSID manipulation) Digi
                                                        > > > > ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave out
                                                        > > > > TraceCalls and FloodCalls
                                                        > > > >
                                                        > > > > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want
                                                        the
                                                        > > > > call to be left as it is received.
                                                        > > > >
                                                        > > > > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet
                                                        is
                                                        > > > > received with n greater than
                                                        > > > > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is
                                                        > > > decremented.
                                                        > > > >
                                                        > > > > ; Specify position. You can specify a fixed LAT/LONG, or use GPS
                                                        > > > >
                                                        > > > > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
                                                        > > > > LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)
                                                        > > > >
                                                        > > > > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
                                                        > > > > GPSSpeed=0 ; overriding the values set above.
                                                        > > > >
                                                        > > > > ; The Digi can generate Object and Item reports.
                                                        > > > >
                                                        > > > > ; The format is pretty strict - a single space between param=value
                                                        > > pairs,
                                                        > > > > ; a comma but no spaces in PATH and PORT string.
                                                        > > > >
                                                        > > > > ; Minimum interval is 10 mins. You can have as many OBJECT lines as
                                                        you
                                                        > > > > need.
                                                        > > > > ; See thr APRS specification for information on how to format an
                                                        Object
                                                        > > or
                                                        > > > > Item string.
                                                        > > > >
                                                        > > > > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
                                                        > > > > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
                                                        > > > >
                                                        > > > > ; IGATE Params. If specified you will gate RF packets and your
                                                        beacons
                                                        > > to
                                                        > > > > APRS-IS
                                                        > > > >
                                                        > > > > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an
                                                        IPV6
                                                        > > > Host
                                                        > > > > ISPort=10152 ; Normal port for a filtered feed
                                                        > > > > ISPasscode=17580 ; If you don't already have a passcode I can issue
                                                        you
                                                        > > > one.
                                                        > > > > ;
                                                        > > > > ; You can specify a filter command to be sent when you log on to
                                                        > > APRS-IS.
                                                        > > > > Normally you don't
                                                        > > > > ; need one. The APRS Mapping Application (BPQAPRS) sets a filter
                                                        when it
                                                        > > > > starts,
                                                        > > > > ; and if you aren't running an APRS application, there isn't much
                                                        point
                                                        > > in
                                                        > > > > getting info from APRS-IS
                                                        > > > > ;
                                                        > > > > ISFilter=m/50 ; Filter Command if needed
                                                        > > > >
                                                        > > > > ***
                                                        > > > > ;
                                                        > > > >
                                                        > > > > The problem is it is not connecting to the aprs server. I have tried
                                                        > > sever
                                                        > > > > servers and I run the one I am trying to connect to and it is
                                                        working.
                                                        > > > > The second thing is the aprs pages I felt needed to be in a folder
                                                        > > 'aprs'
                                                        > > > > but would not work page not found it appears anything in the root
                                                        works
                                                        > > > but
                                                        > > > > not in a folder.
                                                        > > > >
                                                        > > > > do I have something wrong or am I missing something.
                                                        > > > >
                                                        > > > > Stephen
                                                        > > > >
                                                        > > >
                                                        > >
                                                        >

                                                        --
                                                        Message sent via Ubuntu 11.04 & ThunderBird



                                                        --
                                                        Message sent via Ubuntu 11.04 & ThunderBird
                                                      • Michael Mullikin
                                                        Sorry for me it is not there it is hiding in computer space some where Mike _____ From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                                        Message 28 of 30 , Jun 12, 2012

                                                          Sorry for me it is not there it is hiding in computer space some where

                                                           

                                                          Mike

                                                           


                                                          From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Daryll Webb
                                                          Sent: Monday, June 11, 2012 5:01 PM
                                                          To: BPQ32@yahoogroups.com
                                                          Subject: Re: [BPQ32] Re: Problem BPQ 32 windows

                                                           

                                                           

                                                          I find my console after minimize in the bpq icon bottom right in task bar jest like the last program.

                                                          Running winxp pro sp3

                                                          Buster kg9nd

                                                           


                                                          From: Michael Mullikin <w8ehh1@...>
                                                          To: BPQ32@yahoogroups.com
                                                          Sent: Monday, June 11, 2012 8:53 AM
                                                          Subject: RE: [BPQ32] Re: Problem BPQ 32 windows

                                                           

                                                           

                                                          Hi John

                                                          I seem to have a problem with BPQ32 Window.  I notice your picture of Bpq dll consol

                                                          Shows a top line identifying the window.  When BPQ runs the only top line on the windows is the BPQ consol None of the other windows show the header line.  Also if I click the minimize button on the BPQ consol it disappears in to computer land.  I cant  find it and cant bring it back up.  I have to shut down the program and restart it to get it to come back.  I am using widows XP PRO service pack 3.  I  there a setting I need to adjust???

                                                           

                                                          Thank You 

                                                          Mike  W8EHH


                                                          From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of John Wiseman
                                                          Sent: Sunday, June 10, 2012 1:16 PM
                                                          To: BPQ32@yahoogroups.com
                                                          Subject: RE: [BPQ32] Re: Problem with APRS and Web Pages

                                                           

                                                           

                                                          Stephen

                                                           

                                                          You should have something like

                                                           

                                                           

                                                          If the Igate line isn’t there, then something very odd is going on – it suggests the APRS config was rejected, but it that case there should be error messages in the console window.

                                                           

                                                          Did you get “APRS Digi/Gateway Enabled” on the console window (after the “ Initialising Port … “ messages)?

                                                           

                                                          73

                                                          John

                                                           


                                                          From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of STEPHEN
                                                          Sent: 10 June 2012 17:57
                                                          To: BPQ32@yahoogroups.com
                                                          Subject: [BPQ32] Re: Problem with APRS and Web Pages

                                                           

                                                           

                                                          John
                                                          we are getting closer
                                                          The aprs pages are working but I still will not connect to the APRS server
                                                          You stated "Check that the "Enable Igate" checkbox on the bpq32.dll console window is checked."

                                                          I don't see a Enable Igate on the bpq32.dll window?

                                                          I also changed the server as Mike stated.

                                                          Thanks

                                                          --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:

                                                          >
                                                          > Stephen,
                                                          >
                                                          >
                                                          >
                                                          > http://www.ve9sc.com:84/allrf.html
                                                          isn't really working. The HTML is
                                                          > returned, but the APRS data isn't being placed in the page. This suggests
                                                          to
                                                          > me that you have the APRS pages in BPQ32/HTML, not BPQ32/BPQAPRS/HTML.
                                                          >
                                                          >
                                                          >
                                                          > Check that the "Enable Igate" checkbox on the bpq32.dll console
                                                          window is
                                                          > checked. It should be set by default, but if it gets unset, the code won't
                                                          > connect.
                                                          >
                                                          >
                                                          >
                                                          > I don't know why MailChat is giving a program error in Socket Data every
                                                          10
                                                          > minutes, but this isn't related to the Web Server - it is most likely the
                                                          > POP3 server trying to retrieve a message, and being upset by what it gets.
                                                          > The LOG_TCP.txt file may give a clue as to what is going on.
                                                          >
                                                          >
                                                          >
                                                          > 73,
                                                          >
                                                          > John
                                                          >
                                                          >
                                                          >
                                                          >
                                                          >
                                                          >
                                                          >
                                                          >
                                                          >
                                                          > _____
                                                          >
                                                          > From:
                                                          ymailto="mailto:BPQ32%40yahoogroups.com">BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                                          > STEPHEN
                                                          > Sent: 10 June 2012 16:46
                                                          > To:
                                                          ymailto="mailto:BPQ32%40yahoogroups.com">BPQ32@yahoogroups.com
                                                          > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                                          >
                                                          >
                                                          >
                                                          >
                                                          >
                                                          > John
                                                          >
                                                          > I am running javAPRSSrvr 3.15b08 that should be fine.
                                                          > http://www.ve9sc.com:14501/
                                                          >
                                                          > I know this works as i looked at Jerry's
                                                          > http://w9bbs.no-ip.org:8080/
                                                          and it is working.
                                                          >
                                                          > I comment out FloodCalls, DigiCalls, and OBJECT statementsas you stated.
                                                          >
                                                          > Restarted BPQ and it still will not connect to the aprs server. I tried
                                                          > other servers but they will not work either. I tried:
                                                          >
                                                          > The Main APRS servers "First" & "Second" etc.
                                                          >
                                                          > The console screen is fine no errors. It states :
                                                          >
                                                          > APRS/Digi/Gateway Enabled
                                                          >
                                                          > I have all the html file in the html folder no subfolders the link
                                                          >
                                                          > http://www.ve9sc.com:84/Node/Routes.html
                                                          >
                                                          > try the aprs link it will not work nor will that link "APRS"
                                                          from any of the
                                                          > node pages.
                                                          >
                                                          > But http://www.ve9sc.com:84/allrf.html
                                                          works if appears the link is adding a
                                                          > folder aprs.
                                                          > http://www.ve9sc.com:84/aprs/all.html
                                                          >
                                                          > I looked at the debug log
                                                          >
                                                          > 120610 00:00:02 ! |Enter HouseKeeping
                                                          > 120610 00:05:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 00:15:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 00:25:54 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 00:36:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 00:46:15 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 00:56:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 01:06:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 01:16:46 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 01:26:56 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 01:37:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 01:47:17 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 01:57:27 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 02:07:37 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 02:07:37 ! Too Many Program Errors - Closing
                                                          > 120610 02:07:37 ! Attempting to Restart C:\Program
                                                          > Files\BPQ32\BPQMailChat.exe
                                                          > 120610 02:08:46 ! Maint Clock 1339372800 NOW 1339294126 Time to
                                                          HouseKeeping
                                                          > 78674
                                                          > 120610 02:08:46 ! Program Starting
                                                          > 120610 02:08:46 ! BPQMailChat Starting
                                                          > 120610 02:08:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 02:19:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 02:29:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 02:39:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 02:49:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 02:59:49 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 03:09:59 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 03:20:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 03:30:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 03:40:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 03:50:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 04:00:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 04:11:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 04:21:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 04:31:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 04:41:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 04:51:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 05:01:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 05:12:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 05:22:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 05:32:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 05:42:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 05:52:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 06:02:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 06:13:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 06:23:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 06:23:18 ! Too Many Program Errors - Closing
                                                          > 120610 06:23:18 ! Attempting to Restart C:\Program
                                                          > Files\BPQ32\BPQMailChat.exe
                                                          > 120610 06:24:36 ! Maint Clock 1339372800 NOW 1339309476 Time to
                                                          HouseKeeping
                                                          > 63324
                                                          > 120610 06:24:36 ! Program Starting
                                                          > 120610 06:24:36 ! BPQMailChat Starting
                                                          > 120610 06:24:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 06:34:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 06:45:08 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 06:55:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 07:05:29 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 07:15:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 07:25:51 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 07:36:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 07:46:10 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 07:56:20 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 08:06:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 08:16:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 08:26:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 08:37:02 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 08:47:12 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 08:57:22 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 09:07:32 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 09:17:43 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 09:27:53 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 09:38:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 09:48:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 09:58:24 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 10:08:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 10:18:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 10:28:55 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 10:39:05 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 10:39:05 ! Too Many Program Errors - Closing
                                                          > 120610 10:39:05 ! Attempting to Restart C:\Program
                                                          > Files\BPQ32\BPQMailChat.exe
                                                          > 120610 10:40:14 ! Maint Clock 1339372800 NOW 1339324814 Time to
                                                          HouseKeeping
                                                          > 47986
                                                          > 120610 10:40:14 ! Program Starting
                                                          > 120610 10:40:14 ! BPQMailChat Starting
                                                          > 120610 10:40:25 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 10:50:36 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 11:00:47 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 11:10:57 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 11:21:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 11:31:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 11:41:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 11:51:38 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 12:01:48 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 12:11:58 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 12:22:09 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 12:32:19 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 12:42:30 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 12:52:40 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 13:02:50 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 13:13:00 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 13:23:11 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 13:33:21 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 13:43:31 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 13:53:41 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 14:03:52 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 14:14:03 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 14:24:13 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 14:34:23 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 14:44:34 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 14:54:44 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 14:54:44 ! Too Many Program Errors - Closing
                                                          > 120610 14:54:44 ! Attempting to Restart C:\Program
                                                          > Files\BPQ32\BPQMailChat.exe
                                                          > 120610 14:55:56 ! Maint Clock 1339372800 NOW 1339340156 Time to
                                                          HouseKeeping
                                                          > 32644
                                                          > 120610 14:55:56 ! Program Starting
                                                          > 120610 14:55:56 ! BPQMailChat Starting
                                                          > 120610 14:56:07 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 15:06:18 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 15:16:28 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          > 120610 15:26:39 ! MAILCHAT *** Program Error c0000005 at 426445 in
                                                          > Socket_Data EAX 0 EBX 0 ECX 12f100 EDX 12f180 ESI 0 EDI 12f170
                                                          >
                                                          > I am not sure where to go from here.
                                                          >
                                                          > Stephen
                                                          >
                                                          > --- In
                                                          ymailto="mailto:BPQ32%40yahoogroups.com">BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "John
                                                          > Wiseman" <john.wiseman@> wrote:
                                                          > >
                                                          > > Stephen,
                                                          > >
                                                          > >
                                                          > >
                                                          > > You should probably comment out or change the FloodCalls, DigiCalls,
                                                          and
                                                          > > OBJECT statements.
                                                          > >
                                                          > >
                                                          > >
                                                          > > Usually the ISHOST is an APRS-IS server, but if the server you are
                                                          running
                                                          > > locally emulates an IS server, that should be ok. Do you get any
                                                          error
                                                          > > message on the console screen when you load bpa32?
                                                          > >
                                                          > >
                                                          > >
                                                          > > The APRS page templates should be directly in folder BPQAPRS/HTML -
                                                          not a
                                                          > > subfolder, under your BPQ32 config folder.
                                                          > >
                                                          > >
                                                          > >
                                                          > > 73,
                                                          > >
                                                          > > John
                                                          > >
                                                          > >
                                                          > >
                                                          > > From:
                                                          ymailto="mailto:BPQ32%40yahoogroups.com">BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                                          > [mailto:
                                                          ymailto="mailto:BPQ32%40yahoogroups.com">BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On Behalf
                                                          > Of
                                                          > > STEPHEN
                                                          > > Sent: 10 June 2012 15:52
                                                          > > To:
                                                          ymailto="mailto:BPQ32%40yahoogroups.com">BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
                                                          > > Subject: [BPQ32] Problem with APRS and Web Pages
                                                          > >
                                                          > >
                                                          > >
                                                          > >
                                                          > >
                                                          > > I did the last install all worked fine with the install. I added the
                                                          html
                                                          > > and aprs web pages. But the aprs seems to be not working.
                                                          > >
                                                          > > I added the following from example to the script:
                                                          > >
                                                          > > APRSDIGI
                                                          > >
                                                          > > APRSCall VE1MPF-10
                                                          > > StatusMsg=BPQ32 IGate
                                                          Moncton , New Brunswick , Canada
                                                          > >
                                                          > > Symbol=a ; Icon to display for station.
                                                          > > Symset=B ; This is a "B" in a Red Diamond.
                                                          > >
                                                          > > ;
                                                          > > ; Specify a Dest Addreess and Path for each port you want to use for
                                                          APRS.
                                                          > > No dest means receive only port
                                                          > > ; Ports without an APRSPath statement will not be used by the Digi
                                                          > > ;
                                                          > > ; Note if you specify APRS as the destination call it will be
                                                          replaced by
                                                          > > the current BPQ32 APRS
                                                          > > ; identification destination - APBPQ1. If you really want to send
                                                          APRS,
                                                          > > specify APRS-0.
                                                          > >
                                                          > > APRSPath 1= ; Receive only port
                                                          > > ;APRSPath 7=APRS,WIDE1-1 ; Dest and up to 8 digis
                                                          > > ;APRSPath 9=APRS,WIDE1-1,WIDE2-1
                                                          > >
                                                          > > BeaconInterval=30 ; Send Beacon every 30 minute. Minimum is 5 mins
                                                          > > MobileBeaconInterval=2 ; Beacon interval when moving
                                                          > >
                                                          > > ; Define Crossport Digi. For each port, a list of ports to send a
                                                          packet
                                                          > to
                                                          > > (IS means send to APRS-IS)
                                                          > > ; If a Digimap isn't specified for a port, digi out on the port the
                                                          packet
                                                          > > arrived on,
                                                          > > ; and send to APRS-IS (if enabled)
                                                          > > ; If you want to digi on same port, but not send to APRS-IS, Specify
                                                          > Digimap
                                                          > > n=n
                                                          > > ; If you dont want to digi on a port, specify Digimap n=
                                                          > > ;
                                                          > > ; If you only have one APRS port, you probably don't need a Digimap
                                                          > > statement
                                                          > >
                                                          > > ;Digimap 1=9 ; Packets from 1 to 9, but not APRS-IS
                                                          > > ;Digimap 7=7,9,IS ; Packets from 7 to 7, 9 and APRS-IS
                                                          > > ;Digimap 9= ; Don't digi packets received on port 9
                                                          > >
                                                          > > ; Define Digipeating parameters
                                                          > >
                                                          > > TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
                                                          > > FloodCalls=GBR ; Calls for CALLN-n Processing without Trace
                                                          > > DigiCalls=SKIG ; Calls for Normal
                                                          (ie no SSID manipulation) Digi
                                                          > > ; For a Local "Fillin" Digi, you could include WIDE1-1 and
                                                          leave out
                                                          > > TraceCalls and FloodCalls
                                                          > >
                                                          > > ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want
                                                          the
                                                          > > call to be left as it is received.
                                                          > >
                                                          > > MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is
                                                          > > received with n greater than
                                                          > > MaxFloodHops=2 ; this, the value will be replaced BEFORE it is
                                                          > decremented.
                                                          > >
                                                          > > ; Specify position. You can specify a fixed LAT/LONG, or use GPS
                                                          > >
                                                          > > LAT=4607.17N ; Must be in standard APRS Format (ddmm.mmN/S)
                                                          > > LON=06451.33W ; Must be in standard APRS Format (dddmm.mmE/W)
                                                          > >
                                                          > > GPSPort=0 ; if specified, lat/lon will be taken from a GPS,
                                                          > > GPSSpeed=0 ; overriding the values set above.
                                                          > >
                                                          > > ; The Digi can generate Object and Item reports.
                                                          > >
                                                          > > ; The format is pretty strict - a single space between param=value
                                                          pairs,
                                                          > > ; a comma but no spaces in PATH and PORT string.
                                                          > >
                                                          > > ; Minimum interval is 10 mins. You can have as many OBJECT lines as
                                                          you
                                                          > > need.
                                                          > > ; See thr APRS specification for information on how to format an
                                                          Object or
                                                          > > Item string.
                                                          > >
                                                          > > OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30
                                                          > > TEXT=;444.80BPQ*111111z5807.60N/00610.63Wr%156 R15m
                                                          > >
                                                          > > ; IGATE Params. If specified you will gate RF packets and your
                                                          beacons to
                                                          > > APRS-IS
                                                          > >
                                                          > > ISHost=ve9sc.com ; APRS-IS Host Name. May be either an IPV4 or an
                                                          IPV6
                                                          > Host
                                                          > > ISPort=10152 ; Normal port for a
                                                          filtered feed
                                                          > > ISPasscode=17580 ; If you don't already have a passcode I can issue
                                                          you
                                                          > one.
                                                          > > ;
                                                          > > ; You can specify a filter command to be sent when you log on to
                                                          APRS-IS.
                                                          > > Normally you don't
                                                          > > ; need one. The APRS Mapping Application (BPQAPRS) sets a filter when
                                                          it
                                                          > > starts,
                                                          > > ; and if you aren't running an APRS application, there isn't much
                                                          point in
                                                          > > getting info from APRS-IS
                                                          > > ;
                                                          > > ISFilter=m/50 ; Filter Command if needed
                                                          > >
                                                          > > ***
                                                          > > ;
                                                          > >
                                                          > > The problem is it is not connecting to the aprs server. I have tried
                                                          sever
                                                          > > servers and I run the one I am trying to connect to and it is
                                                          working.
                                                          > > The second thing is the aprs pages I felt needed to be in a folder
                                                          'aprs'
                                                          > > but would not work page not found it appears anything in the root
                                                          works
                                                          > but
                                                          > > not in a folder.
                                                          > >
                                                          > > do I have something wrong or am I missing something.
                                                          > >
                                                          > > Stephen
                                                          > >
                                                          >

                                                           

                                                        • John Wiseman
                                                          Mike, I don t understand where the Icon is going, but you could try turning off the Minimize to Notification Area (System Tray) option in the bpq32.dll
                                                          Message 29 of 30 , Jun 13, 2012

                                                            Mike,

                                                             

                                                            I don’t understand where the Icon is going, but you could try turning off the “Minimize to Notification Area (System Tray)” option in the bpq32.dll console Actions menu. The programs should then minimize to the task bar.

                                                             

                                                            73, John


                                                            From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of Michael Mullikin
                                                            Sent: 12 June 2012 22:45
                                                            To: BPQ32@yahoogroups.com
                                                            Subject: RE: [BPQ32] Re: Problem BPQ 32 windows

                                                             

                                                             

                                                            Sorry for me it is not there it is hiding in computer space some where

                                                             

                                                            Mike

                                                             


                                                            From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of Daryll Webb
                                                            Sent: Monday, June 11, 2012 5:01 PM
                                                            To: BPQ32@yahoogroups.com
                                                            Subject: Re: [BPQ32] Re: Problem BPQ 32 windows

                                                             

                                                             

                                                            I find my console after minimize in the bpq icon bottom right in task bar jest like the last program.

                                                            Running winxp pro sp3

                                                            Buster kg9nd

                                                             


                                                            From: Michael Mullikin <w8ehh1@...>
                                                            To: BPQ32@yahoogroups.com
                                                            Sent: Monday, June 11, 2012 8:53 AM
                                                            Subject: RE: [BPQ32] Re: Problem BPQ 32 windows

                                                             

                                                             

                                                            Hi John

                                                            I seem to have a problem with BPQ32 Window.  I notice your picture of Bpq dll consol

                                                            Shows a top line identifying the window.  When BPQ runs the only top line on the windows is the BPQ consol None of the other windows show the header line.  Also if I click the minimize button on the BPQ consol it disappears in to computer land.  I cant  find it and cant bring it back up.  I have to shut down the program and restart it to get it to come back.  I am using widows XP PRO service pack 3.  I  there a setting I need to adjust???

                                                             

                                                            Thank You 

                                                            Mike  W8EHH


                                                            From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of John Wiseman
                                                            Sent: Sunday, June 10, 2012 1:16 PM
                                                            To: BPQ32@yahoogroups.com
                                                            Subject: RE: [BPQ32] Re: Problem with APRS and Web Pages

                                                             

                                                             

                                                            Stephen

                                                             

                                                            You should have something like

                                                             

                                                             

                                                            If the Igate line isn’t there, then something very odd is going on – it suggests the APRS config was rejected, but it that case there should be error messages in the console window.

                                                             

                                                            Did you get “APRS Digi/Gateway Enabled” on the console window (after the “ Initialising Port … “ messages)?

                                                             

                                                            73

                                                            John

                                                             


                                                            From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of STEPHEN
                                                            Sent: 10 June 2012 17:57
                                                            To: BPQ32@yahoogroups.com
                                                            Subject: [BPQ32] Re: Problem with APRS and Web Pages

                                                             

                                                             

                                                            John
                                                            we are getting closer
                                                            The aprs pages are working but I still will not connect to the APRS server
                                                            You stated "Check that the "Enable Igate" checkbox on the bpq32.dll console window is checked."

                                                            I don't see a Enable Igate on the bpq32.dll window?

                                                            I also changed the server as Mike stated.

                                                            Thanks

                                                            --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:

                                                            >
                                                            > Stephen,
                                                            >
                                                            >
                                                            >
                                                            > http://www.ve9sc.com:84/allrf.html
                                                            isn't really working. The HTML is
                                                            > returned, but the APRS data isn't being placed in the page. This suggests
                                                            to
                                                            > me that you have the APRS pages in BPQ32/HTML, not BPQ32/BPQAPRS/HTML.
                                                            >
                                                            >
                                                            >
                                                            > Check that the "Enable Igate" checkbox on the bpq32.dll console
                                                            window is
                                                            > checked. It should be set by default, but if it gets unset, the code won't
                                                            > connect.
                                                            >
                                                            >
                                                            >
                                                            > I don't know why MailChat is giving a program error in Socket Data every
                                                            10
                                                            > minutes, but this isn't related to the Web Server - it is most likely the
                                                            > POP3 server trying to retrieve a message, and being upset by what it gets.
                                                            > The LOG_TCP.txt file may give a clue as to what is going on.
                                                            >
                                                            >
                                                            >
                                                            > 73,
                                                            >
                                                            > John
                                                            >
                                                            >
                                                            >
                                                            >
                                                            >
                                                            >
                                                            >
                                                            >
                                                            >
                                                            > _____
                                                            >
                                                            > From:
                                                            ymailto="mailto:BPQ32%40yahoogroups.com">BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                                                            > STEPHEN
                                                            > Sent: 10 June 2012 16:46
                                                            > To:
                                                            ymailto="mailto:BPQ32%40yahoogroups.com">BPQ32@yahoogroups.com
                                                            > Subject: [BPQ32] Re: Problem with APRS and Web Pages
                                                            >
                                                            >
                                                            >
                                                            >
                                                            >
                                                            > John
                                                            >
                                                            > I am running javAPRSSrvr 3.15b08 that should be fine.
                                                            > http://www.ve9sc.com:14501/
                                                            >
                                                            > I know this works as i looked at Jerry's
                                                            > http://w9bbs.no-ip.org:8080/
                                                            and it is working.
                                                            >
                                                            > I comment out FloodCalls, DigiCalls, and OBJECT statementsas you stated.
                                                            >
                                                            > Restarted BPQ and it still will not connect to the aprs server. I tried
                                                            > other servers but they will not work either. I tried:
                                                            >
                                                            > The Main APRS servers "First" & "Second" etc.
                                                            >
                                                            > The console screen is fine no errors. It states :
                                                            >
                                                            > APRS/Digi/Gateway Enabled
                                                            >
                                                            > I have all the html file in the html folder no subfolders the link
                                                            >
                                                            > http://www.ve9sc.com:84/Node/Routes.html
                                                            >
                                                            > try the aprs link it will not work nor will that link "APRS"
                                                            from any of the
                                                            > node pages.
                                                            >
                                                            > But http://www.ve9sc.com:84/allrf.html
                                                            works if appears the link is adding a
                                                            > folder aprs.
                                                            > http://www.ve9sc.com:84/aprs/all.html
                                                            >
                                                            > I looked