RE: [BPQ32] Winmor fwd call retries
It should go in the same place as CWID, DRIVELEVEL, etc.
But having just checked the code, that will only work for the first attempt. It will be set back to 4 when the session is released. I’ll fix that for the next version
From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of Alpacas
Sent: 27 May 2012 05:27
Subject: Re: [BPQ32] Winmor fwd call retries
Works fine added to any connect script.
However, would prefer to put it in the bpqconfig, but cannot find a location in the winmor port info that works. My winmor port config follows:
PORTNUM=5 ; Optional but sets port number if stated
ID=HF WINMOR ; Displayed by PORTS command
TYPE=EXTERNAL ; Port is RS232 Com
PROTOCOL=WINMOR ; TNC is used in KISS mode
QUALITY=0 ; Quality factor applied to node broadcasts heard on
; Default Winmor TNC port is 8500. Change as appropriate. Put TNC in a folder "Winmor" within BPQ32 directory.
; If using Windows 7 (or maybe Vista ), process is a bit different. Let me know.
ADDR 127.0.0.1 8700 PATH C:\PROGRAM FILES\BPQ32\WINMOR\Winmor TNC.exe
; Customize rig control as needed. If operating on a fixed freq/manually delete the rig control lines.
COM1 4800 KENWOOD TS-440S
WL2KREPORT PUBLIC, www.winlink.org, 8778, W0ECM-10, EM26bh, 00-23, 7082000, WINMOR500, 50
WL2KREPORT PUBLIC, www.winlink.org, 8778, W0ECM-10, EM26bh, 00-23, 14105700, WINMOR500, 50
Any help as to where I would insert the MAXCONREQ 7 LINE???
----- Original Message -----
From: John Wiseman
Sent: Saturday, May 26, 2012 9:26 AM
Subject: RE: [BPQ32] Winmor fwd call retries
Neither a BPQ or WINMOR problem, but a configuration issue.
The number of connect requests is controlled by the WINMOR TNC MAXCONREQ parameter. Values can be from 3 to 15, and it can be placed in either the WINMOR section of bpq32.cfg, or in the connect script.
From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of Acres of Love
Sent: 25 May 2012 23:29
Subject: [BPQ32] Winmor fwd call retries
My "all is well" proclamation may have been premature. After a fresh start of BPQ32, BPQMailchat and BPQTerminal, when commanded to start a mail forward via WINMOR TNC, 7 "con req" transmissions are made before quitting (ID transmission). Subsequent mail forward starts result in only 4 "con req" transmissions before quitting with an ID. System will only make 7 connect request transmissions the first time a connect is attempted after program restart.
BPQ problem or WINMOR?
Thanks in advance...
Owasso , OK