Loading ...
Sorry, an error occurred while loading the content.
 

RE: [BPQ32] WL2KREPORT not posting after install of 5.2.6.1 [1 Attachment]

Expand Messages
  • Jerry
    Mine seems to work fine now after about 13 Months of not working???? Go figure it is set up with the new style.. From: BPQ32@yahoogroups.com
    Message 1 of 16 , Apr 30, 2012
    Mine seems to work fine now after about 13 Months of not working???? Go
    figure it is set up with the new style..



    From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Mike
    Melnik
    Sent: Monday, April 30, 2012 4:40 PM
    To: BPQ32@yahoogroups.com
    Subject: RE: [BPQ32] WL2KREPORT not posting after install of 5.2.6.1 [1
    Attachment]





    [Attachment(s) from Mike Melnik included below]

    Ken

    There is more to the reporting problem then just editing the report line and
    moving it to the
    Ports section.

    Mike-N9PMO
    www.n9pmo.com
    -----Original Message-----
    From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
    [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ]
    On Behalf Of Ken Jacobs
    Sent: Monday, April 30, 2012 3:27 PM
    To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
    Subject: Re: [BPQ32] WL2KREPORT not posting after install of
    5.2.6.1


    The winlink reporting has changed in the last
    release......check out this link:


    http://www.cantab.net/users/john.wiseman/Documents/WL2KReporting.html

    Note: all reporting now goes in each rf port....not the
    telnet port anymore. So, every rf port you want to report to winlink will
    have a WL2KREPORT line....

    Ken KD6PGI
    On Mon, Apr 30, 2012 at 1:02 PM, Douglas Parker
    <n4ata@... <mailto:n4ata%40comcast.net> > wrote:


    Hi All,

    Since upgrading to 5.2.6.1 a couple of weeks ago, I have
    noticed that my WL2KREPORT information is not
    showing up on the WL2K RMS Map on winlink.org website.

    After doing some research I found an reference that
    indicates the WL2KREPORT needed to be modified
    adding PUBLIC, and PKT in the line. Here is how my entry in
    my BPQ32.CFG TELNET PORT Definition reads:

    CMS=1
    WL2KREPORT PUBLIC, www.winlink.org, 8778, N4ATA, DM79lq,
    00-23, 145050000, PKT1200, 35. 25, 7, 0

    I made the change Yesterday, April 29 2012 and restarted my
    system. To date, I still don't see anything showing
    up on the WL2K map or even any of the aprs reporting
    websites showing my Winlink information. Prior to 5.2.6.1
    it was working and posting regularly

    Any suggestions will be welcome.



    73, Doug - N4ATA
    Denver, CO 80219
    n4ata@... <mailto:n4ata%40comcast.net>
  • Jay WS7I
    ... ^^^^^^^^^^^^^^^ after 35 and b4 25 you have period should be a comma
    Message 2 of 16 , Apr 30, 2012
      On 4/30/2012 1:02 PM, Douglas Parker wrote:
       




      Hi All,

      Since upgrading to 5.2.6.1 a couple of weeks ago, I have noticed that my WL2KREPORT information is not
      showing up on the WL2K RMS Map on winlink.org website.

      After doing some research I found an reference that indicates the WL2KREPORT needed to be modified
      adding PUBLIC, and PKT in the line. Here is how my entry in my BPQ32.CFG TELNET PORT Definition reads:

      CMS=1
      WL2KREPORT PUBLIC, www.winlink.org, 8778, N4ATA, DM79lq, 00-23, 145050000, PKT1200, 35. 25, 7, 0
                                                                                 

                                                                                                                                                    ^^^^^^^^^^^^^^^
                                                                                                                                                     after 35 and b4 25 you have period should be a comma
          

      I made the change Yesterday, April 29 2012 and restarted my system. To date, I still don’t see  anything showing
      up on the WL2K map or even any of the aprs reporting websites showing my Winlink information. Prior to 5.2.6.1
      it was working and posting regularly

      Any suggestions will be welcome.



      73, Doug – N4ATA
      Denver, CO 80219
      n4ata@...






    • John Wiseman
      If reporting worked before upgrading to 5.2.6.1, then changing the config to the new format described in the link below should fix it. If you have just started
      Message 3 of 16 , Apr 30, 2012
      If reporting worked before upgrading to 5.2.6.1, then changing the config to
      the new format described in the link below should fix it.



      If you have just started using bpq32 for WL2K access, and have never run RMS
      Packet before, you will not have a SYSOP record on the WL2K database, so
      even if your reporting is correct, you will not show up on the new frequency
      list, although your call will appear on the program versions page. The next
      version of BPQ32 will have a facility to create and update the sysop record.



      The WL2K team have changed the way they detect out of date versions, so now
      you should only appear on the out of date list if you are running a version
      prior to 5.2.6.1 (many thanks to Lee for making this change).



      73,

      John











      _____

      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Mike
      Melnik
      Sent: 30 April 2012 21:40
      To: BPQ32@yahoogroups.com
      Subject: RE: [BPQ32] WL2KREPORT not posting after install of 5.2.6.1 [1
      Attachment]





      [Attachment(s) from Mike Melnik included below]

      Ken

      There is more to the reporting problem then just editing the report line and
      moving it to the
      Ports section.

      Mike-N9PMO
      www.n9pmo.com
      -----Original Message-----
      From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ]
      On Behalf Of Ken Jacobs
      Sent: Monday, April 30, 2012 3:27 PM
      To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      Subject: Re: [BPQ32] WL2KREPORT not posting after install of
      5.2.6.1


      The winlink reporting has changed in the last
      release......check out this link:


      http://www.cantab.net/users/john.wiseman/Documents/WL2KReporting.html

      Note: all reporting now goes in each rf port....not the
      telnet port anymore. So, every rf port you want to report to winlink will
      have a WL2KREPORT line....

      Ken KD6PGI
      On Mon, Apr 30, 2012 at 1:02 PM, Douglas Parker
      <n4ata@... <mailto:n4ata%40comcast.net> > wrote:


      Hi All,

      Since upgrading to 5.2.6.1 a couple of weeks ago, I have
      noticed that my WL2KREPORT information is not
      showing up on the WL2K RMS Map on winlink.org website.

      After doing some research I found an reference that
      indicates the WL2KREPORT needed to be modified
      adding PUBLIC, and PKT in the line. Here is how my entry in
      my BPQ32.CFG TELNET PORT Definition reads:

      CMS=1
      WL2KREPORT PUBLIC, www.winlink.org, 8778, N4ATA, DM79lq,
      00-23, 145050000, PKT1200, 35. 25, 7, 0

      I made the change Yesterday, April 29 2012 and restarted my
      system. To date, I still don't see anything showing
      up on the WL2K map or even any of the aprs reporting
      websites showing my Winlink information. Prior to 5.2.6.1
      it was working and posting regularly

      Any suggestions will be welcome.



      73, Doug - N4ATA
      Denver, CO 80219
      n4ata@... <mailto:n4ata%40comcast.net>
    • Jay WS7I
      This is working on both the public side and on the MARS side. Works for Packet and Winmor in those sections. Jay WS7I AAR0AR
      Message 4 of 16 , Apr 30, 2012
        This is working on both the public side and on the MARS side.  Works for Packet and Winmor in those sections.

        Jay WS7I  AAR0AR
      Your message has been successfully submitted and would be delivered to recipients shortly.