Loading ...
Sorry, an error occurred while loading the content.

Re: 2 PC's BBS to Cluster via AXIP

Expand Messages
  • g3ldi
    Hi Dave. I was wondering if you had had any luck at all ? I have now managed to get the two nodes to talk to each other, with even more fiddling of the AXIPCFG
    Message 1 of 10 , Jul 16, 2007
    • 0 Attachment
      Hi Dave.

      I was wondering if you had had any luck at all ?

      I have now managed to get the two nodes to talk to each other,
      with even more fiddling of the AXIPCFG file.
      However, I still get the same message come up when I try to connect
      to the Cluster. "ALL DX ports busy, pleae try later". That is
      beginning to frustrate me now! I cannot see what else to do.

      Let me know if you have any success!

      73 de Roger, G3LDI

      --- In BPQ32@yahoogroups.com, "g3ldi" <g3ldi@...> wrote:
      >
      > Hi Dave.
      >
      > I think I need three heads!! This is really confusing me. It would
      > be better if I understood AXIP I think Dave.
      > Anyway, I am sending you my AXIPCFG file and as you see, I have
      > tried lots of things in there! If you can add any suggestions, I am
      > listening! I was not running AGWtoBPQ, forgot to invoke that, but
      > although that is now running, still no luck here. If I have any, I
      > will let you know.
      >
      > 73 de Roger, G3LDI
      >
      >
      >
      >
      >
      > ; Config file for BPQAXIP N5IN BPQ32 Node
      > MHEARD ;Opens AXIP MHEARD window
      > UDP 10093 ;Listens for UDP packets on this port
      > number
      > MAP N5IN-3 DXSPOTS.COM UDP 10093
      > MAP NODES DXSPOTS.COM UDP 10093
      > MAP VE3KPG-2 VE3EMA.MINE.NU UDP 10093
      > MAP NODES VE3EMA.MINE.NU UDP 10093
      > MAP KB8DM-5 KB8DM.NO-IP.ORG UDP 10093
      > MAP NODES KB8DM.NO-IP.ORG UDP 10093
      > MAP KB9RRX-2 KB9RRX.DYNDNS.ORG UDP 10093
      > MAP NODES KB9RRX.DYNDNS.ORG UDP 10093
      > MAP N9PMO-2 N9PMO.DYNDNS.ORG UDP 10093
      > MAP NODES N9PMO.DYNDNS.ORG UDP 10093
      > MAP KC8GKF-2 KC8GKF.DYNDNS.ORG UDP 10093
      > MAP NODES KC8GKF.DYNDNS.ORG UDP 10093
      > MAP VE3UIL-7 VE3UIL.NO-IP.ORG UDP 10093
      > MAP NODES VE3UIL.NO-IP.ORG UDP 10093
      > MAP KC9S-1 216.175.51.146 UDP 10093
      > MAP NODES 216.175.51.146 UDP 10093
      > MAP W9BBS W9BBS.NO-IP.ORG UDP 10093
      > MAP NODES W9BBS.NO-IP.ORG UDP 10093
      > MAP GB7VLS GB7VLS.ATH.CX UDP 10093
      > MAP G4VLS-6 GB7VLS.ATH.CX UDP 10093
      > MAP NODES GB7VLS.ATH.CX UDP 10093
      > MAP VE3KPG-2 VE3EMA.MINE.NU UDP 10093
      > ;
      > ; # Optional. Enables UDP support, and ;defines
      > ; # the port AX.IP listens on
      > ;
      > MHEARD
      > UDP 6300
      > MAP G3LDI 192.168.123.112 UDP 6300
      > MAP NODES 192.168.123.112 UDP 6300
      > #MAP SWAR9 192.168.123.113 UDP 7000
      > MAP NODES 192.168.123.113 UDP 6300
      > #MAP G3LDI-9 192.168.123.113 UDP 7000
      > MAP GB7RDX-1 g3ldi.shacknet.nu UDP 7000
      > MAP GB7VLS GB7VLS.ATH.CX UDP 6300
      > MAP G4VLS-6 GB7VLS.ATH.CX UDP 6300
      > #MAP NODES GB7VLS.ATH.CX UDP 6300
      > ;
      > ; # Use UDP encapulation, send to port
      > ; # 6300
      > UDP 7000
      > MAP GB7RDX-1 g3ldi.shacknet.nu UDP 7000
      > #MAP GB7RDX-1 192.168.123.113 7000
      > ;It is OK to mix Raw IP and UDP encapsulation, and to use a different
      > ;port for different destinations,
      >
      >
      >
      >
      >
      > --- In BPQ32@yahoogroups.com, "David Calder" <n4zkf@> wrote:
      > >
      > > Roger,
      > >
      > > Please send me your file. I am trying to do "exactly" the same
      > thing. Maybe
      > > two
      > > heads are better than one.
      > >
      > > 73 Dave
      > > n4zkf
      > > BBS
      > > bbs.n4zkf.com
      > > cluster
      > > dxc.n4zkf.com
      > >
      > >
      > >
      > > _____
      > >
      > > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On
      Behalf Of
      > > g3ldi
      > > Sent: Tuesday, July 10, 2007 6:00 AM
      > > To: BPQ32@yahoogroups.com
      > > Subject: [BPQ32] 2 PC's BBS to Cluster via AXIP
      > >
      > >
      > >
      > > Hi.
      > >
      > > If anybody can help with the AXIP CFG file, I would be grateful.
      > >
      > > I am running FBB32 on one PC fronted by BPQ32. I have another PC with
      > > the CCC CLuster Node running on it. I wish my users to be able to
      > > connect to the Cluster via my Node, SWAR. I did have this working once
      > > and then it stopped for some reason, probably me messing around with
      > > the above file! I can Telnet from one machine to the other, both are
      > > on the LAN, and despite hours spent fiddling, the CLuster is not
      > > available. The message I have when trying is "ALL Ports in use, please
      > > try later" .
      > > ANy help very much appreciated. I can attach my AXIPCFG file if
      > > necessary.
      > >
      > > 73 de Confused of Swardeston! Roger, G3LDI
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.