Loading ...
Sorry, an error occurred while loading the content.

Re: BPQMailChat startup error

Expand Messages
  • gsw_mail
    Rereading my original post, I left something out. Upon launching MailChat, I receive the bind(25) failed Error 10048 as noted. Upon clearing that error
    Message 1 of 5 , Feb 4, 2012
    • 0 Attachment
      Rereading my original post, I left something out.

      Upon launching MailChat, I receive the "bind(25) failed Error 10048" as noted. Upon clearing that error message I receive a similar "bind(110) failed Error 10048" message. Then all appears okay.

      Apologies for the omission.


      Gary S. Wong
      W6GSW
      Emergency Coordinator
      Northeast District, Los Angeles Section
      Amateur Radio Emergency Service
      ARRL-accredited Volunteer Examiner
      Email w6gsw@...


      --- In BPQ32@yahoogroups.com, "gsw_mail" <w6gsw@...> wrote:
      >
      > I operate a VHF Winlink RMS Packet gateway. BPQ32 controls the radio and Telnet port access. No apparent issues there.
      >
      > Having just upgraded to BPQ 5.2.4.1, I wanted to experiment with BPQMailChat. Upon launching the program a dialog box pops up displaying the message "bind(25) failed Error 10048".
      >
      > Clicking "OK" to clear the error message I configured and began "playing around" with MailChat. Everything appears (to me at least) to be functioning as expected. I can connect to the BBS both manually and using Outpost.
      >
      > But every time I start MailChat the error message appears. Is this something to be concerned with, as all seems to be operating properly?
      >
      > The computer OS is Windows XP Professional, Service Pack 3. TNC is a TNC-X attached by USB.
      >
      > Any thoughts are appreciated.
      >
      > Thanks and 73.
      >
      >
      > Gary S. Wong
      > W6GSW
      > Emergency Coordinator
      > Northeast District, Los Angeles Section
      > Amateur Radio Emergency Service
      > ARRL-accredited Volunteer Examiner
      > Email w6gsw@...
      >
    • Andre
      ... Sounds like some program is using either port 25, 110 or 119 preventing mailchat from using them, you can set them different in mailchat or turn them off
      Message 2 of 5 , Feb 4, 2012
      • 0 Attachment
        Op 4-2-2012 18:59, gsw_mail schreef:
        > I operate a VHF Winlink RMS Packet gateway. BPQ32 controls the radio and Telnet port access. No apparent issues there.
        >
        > Having just upgraded to BPQ 5.2.4.1, I wanted to experiment with BPQMailChat. Upon launching the program a dialog box pops up displaying the message "bind(25) failed Error 10048".
        >
        > Clicking "OK" to clear the error message I configured and began "playing around" with MailChat. Everything appears (to me at least) to be functioning as expected. I can connect to the BBS both manually and using Outpost.
        >
        > But every time I start MailChat the error message appears. Is this something to be concerned with, as all seems to be operating properly?
        >
        > The computer OS is Windows XP Professional, Service Pack 3. TNC is a TNC-X attached by USB.
        >
        > Any thoughts are appreciated.
        >
        > Thanks and 73.
        >
        >
        Sounds like some program is using either port 25, 110 or 119 preventing
        mailchat from using them, you can set them different in mailchat or turn
        them off if you don't want to write messages using your email client.

        73 Andre PE1RDW
      • gsw_mail
        Thanks Andre. You are absolutely correct. After pulling out quite a few of my remaining hairs I was having a coffee just a few minutes ago and it suddenly
        Message 3 of 5 , Feb 4, 2012
        • 0 Attachment
          Thanks Andre. You are absolutely correct.

          After pulling out quite a few of my remaining hairs I was having a coffee just a few minutes ago and it suddenly occurred to me that "25" and "110" from the error messages are the SMTP and POP ports.

          Configuration changed and problem solved.

          Thanks again.


          Gary S. Wong
          W6GSW
          Emergency Coordinator
          Northeast District, Los Angeles Section
          Amateur Radio Emergency Service
          ARRL-accredited Volunteer Examiner
          Email w6gsw@...

          --- In BPQ32@yahoogroups.com, Andre <pe1rdw@...> wrote:
          >
          > Op 4-2-2012 18:59, gsw_mail schreef:
          > > I operate a VHF Winlink RMS Packet gateway. BPQ32 controls the radio and Telnet port access. No apparent issues there.
          > >
          > > Having just upgraded to BPQ 5.2.4.1, I wanted to experiment with BPQMailChat. Upon launching the program a dialog box pops up displaying the message "bind(25) failed Error 10048".
          > >
          > > Clicking "OK" to clear the error message I configured and began "playing around" with MailChat. Everything appears (to me at least) to be functioning as expected. I can connect to the BBS both manually and using Outpost.
          > >
          > > But every time I start MailChat the error message appears. Is this something to be concerned with, as all seems to be operating properly?
          > >
          > > The computer OS is Windows XP Professional, Service Pack 3. TNC is a TNC-X attached by USB.
          > >
          > > Any thoughts are appreciated.
          > >
          > > Thanks and 73.
          > >
          > >
          > Sounds like some program is using either port 25, 110 or 119 preventing
          > mailchat from using them, you can set them different in mailchat or turn
          > them off if you don't want to write messages using your email client.
          >
          > 73 Andre PE1RDW
          >
        • Daryll Webb
          We had the same bind thing happen at cvlle we change usb drivers and cable and no more bind isue I don t know why that is jest what we did. Buster kg9nd
          Message 4 of 5 , Feb 4, 2012
          • 0 Attachment
            We had the same bind thing happen at cvlle we change usb drivers and cable and no more bind isue I don't know why that is jest what we did.
            Buster kg9nd


            From: gsw_mail <w6gsw@...>
            To: BPQ32@yahoogroups.com
            Sent: Saturday, February 4, 2012 1:09 PM
            Subject: [BPQ32] Re: BPQMailChat startup error

             


            Rereading my original post, I left something out.

            Upon launching MailChat, I receive the "bind(25) failed Error 10048" as noted. Upon clearing that error message I receive a similar "bind(110) failed Error 10048" message. Then all appears okay.

            Apologies for the omission.

            Gary S. Wong
            W6GSW
            Emergency Coordinator
            Northeast District, Los Angeles Section
            Amateur Radio Emergency Service
            ARRL-accredited Volunteer Examiner
            Email w6gsw@...

            --- In BPQ32@yahoogroups.com, "gsw_mail" <w6gsw@...> wrote:
            >
            > I operate a VHF Winlink RMS Packet gateway. BPQ32 controls the radio and Telnet port access. No apparent issues there.
            >
            > Having just upgraded to BPQ 5.2.4.1, I wanted to experiment with BPQMailChat. Upon launching the program a dialog box pops up displaying the message "bind(25) failed Error 10048".
            >
            > Clicking "OK" to clear the error message I configured and began "playing around" with MailChat. Everything appears (to me at least) to be functioning as expected. I can connect to the BBS both manually and using Outpost.
            >
            > But every time I start MailChat the error message appears. Is this something to be concerned with, as all seems to be operating properly?
            >
            > The computer OS is Windows XP Professional, Service Pack 3. TNC is a TNC-X attached by USB.
            >
            > Any thoughts are appreciated.
            >
            > Thanks and 73.
            >
            >
            > Gary S. Wong
            > W6GSW
            > Emergency Coordinator
            > Northeast District, Los Angeles Section
            > Amateur Radio Emergency Service
            > ARRL-accredited Volunteer Examiner
            > Email w6gsw@...
            >



          Your message has been successfully submitted and would be delivered to recipients shortly.