Loading ...
Sorry, an error occurred while loading the content.

UIView32 Ports Display Issue

Expand Messages
  • Ron Stordahl
    In the example bpqcfg.txt file supplied with the beta you will note that for Ports 1 and 2 the ID= definition appears thus: ID=BPQ 147.525 MHz ; Displayed
    Message 1 of 1 , Sep 15, 2005
    • 0 Attachment
      In the example bpqcfg.txt file supplied with the beta you will note that
      for Ports 1 and 2 the ID= definition appears thus:

      ID=BPQ 147.525 MHz ; Displayed by PORTS command OR
      ID=AGW 147.525 MHz ; Displayed by PORTS command

      A running BPQ32 will respond to a PORTS command with

      1 BPQ 147.525 MHz OR
      1 AGW 147.525 MHz

      However in UIView32 in the AGWPE Ports Information Window, which
      displays briefly after doing the Setup/Comms Setup skips over the first
      word, in this case BPQ or AGW, displaying only 147.525 MHz. I have not
      tried other possible 'first words', perhaps just a period or a dash in
      that space would be enough so that the balance would be displayed. It's
      a pretty minor issue, and apparently would require a fix to UIView32,
      something which is unlikely to happen. So the work around is just to
      add an additional piece of text, and live with it disappearing.

      Ron, N5IN
    Your message has been successfully submitted and would be delivered to recipients shortly.