Installation & Setup Instructions for BPQ32 with WinFbb 7.01, TELPAC, UIView...
- I am posting the following on behalf of Mike Melnik N9PMO who has
WinFbb, TELPAC, UI-View as well as a easy user connect remotely to my
AR-Cluster working. I worked with Mike on the phone and together we
got it going.
I have updated the folder WinFBB 7.01 Setup in the files section with
a revised description of the procedure.
This per Mike:
I am running WinFbb7.01Alpha, TELPAC, UI-VIEW and a DX Cluster connect
I run WinFBB in the BPQ Mode
TELPAC in the AGW Mode
UI-VIEW in the BPQ mode
And the DX Cluster is just a connection to an AXIP DX Cluster, all has
been running fine
The following is the BPQCFG.TXT Application setup
Note that the L4APPL= is no longer supported!
The Appl Mask Value in the AGWtoBPQ.EXE/Configuration for my
application is 0x10
Comment by N5IN: It's 0x10 because the first application interface is
via a DLL rather than via AGWtoBPQ. If in this example WinFBB
interfaced to BPQ32 via AGWtoBPQ, this mask would have been 0x11, i.e.
the hex sum of 1 and 16 (because in APPLICATIONS= the first and fifth
positional parms are used (i.e. 2^(1-1) + 2^(5-1)).
Just a Note about the Port MINQUAL= on previous versions of BPQ was
The statement just had to be added in, I was using it the 409 Version.
Big thanks to John Wiseman and Ron Stordahl for their continuous support.