Loading ...
Sorry, an error occurred while loading the content.

Re: WL2KREPORT not working for HF WINMOR

Expand Messages
  • n9vt_andy
    John et. al., Thank you for the quick response. I ve moved the WINMOR WL2KREPORT statement to the WINMOR port configuration. I can live w/o my station status
    Message 1 of 6 , Mar 18, 2011
    • 0 Attachment
      John et. al.,

      Thank you for the quick response. I've moved the WINMOR WL2KREPORT statement to the WINMOR port configuration.

      I can live w/o my station status showing up on the website. As long as it's updated in the RMS Express frequency lists that's good enough for me. Back to BPQ-only!

      73/Andy
      N9VT


      --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
      >
      > Andy,
      >
      > The WL2KREPORT line for your WINMOR port should be in the WINMOR config. The
      > statements in the Telnet config generate VHF staus reports.
      >
      > There is something odd going on with the winlink.org database updates. I
      > haven't got a complete picture, but it seems that at least sometimes the
      > Maps are updating but the lists not. I believe the station selection list
      > used by WINMOR is updating - try looking for your call in the selection
      > list.
      >
      > 73,
      > John
      >
      >
      > -----Original Message-----
      > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
      > n9vt_andy
      > Sent: 18 March 2011 18:50
      > To: BPQ32@yahoogroups.com
      > Subject: [BPQ32] WL2KREPORT not working for HF WINMOR
      >
      >
      >
      >
      > All,
      >
      > WL2KREPORT doesn't seem to be updating my RMS WINMOR station information in
      > the RMS server status listings.
      >
      > I'm an RMS Packet and WINMOR sysop. I'd like to turn off the RMS software
      > and use BPQ exclusively for RMS access. Everything is working great on the
      > RF side. My only challenge is that the WL2KREPORT command doesn't seem to be
      > updating the RMS WINMOR status list on the Winlink.org website or in the RMS
      > Express software.
      >
      > The RMS Packet status report does appear to be working, at least part of the
      > time.
      >
      > I placed both WL2KREPORT statements at the end of the Telnet port
      > configuration section. Besides the Telnet port I have one VHF port (using
      > AGWPE) and one HF WINMOR port.
      >
      > Can anyone see any obvious problems?
      >
      > Note: I'm running the RMS WINMOR software until I get this sorted out so you
      > will see current status information if you check the website.
      >
      > Thanks,
      > Andy
      > N9VT
      >
      > PORT
      > PORTNUM=9
      > ID=Telnet Server
      > TYPE=EXTERNAL
      > DLLNAME=Telnet.DLL
      >
      > CONFIG
      >
      > LOGGING=1
      > DisconnectOnClose=1
      > CMS=1
      > TCPPORT=8023
      > LOGINPROMPT=user:
      > PASSWORDPROMPT=password:
      > MAXSESSIONS=10
      >
      > CTEXT=Welcome to N9VT's BPQ Telnet Server...\nVTNODE:N9VT} CONNECT BBS BYE
      > CHAT INFO MHEARD NODES PORTS RMS
      >
      > ROUTES USERS\n\nEnter ? for list of commands\n\n
      >
      > USER=xxxx,xxxx,xxxx
      > USER=xxxx,xxxx,xxxx
      >
      > WL2KREPORT www.winlink.org, 8778, N9VT, FM18GF, 24/7 BPQ, 145550000, 1200,
      > 10, 25, 4, 0
      > WL2KREPORT www.winlink.org, 8778, N9VT, FM18GF, 24/7 BPQ, 3587500, N
      > ENDPORT
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.