Loading ...
Sorry, an error occurred while loading the content.

RE: [BPQ32] Re: Forwarding

Expand Messages
  • John Wiseman
    Jeff/Ed, Either he doesn t have you as a BBS, or does not have Allow Binary checked. 73, John (one of the old retired guys!) _____ From:
    Message 1 of 37 , Feb 25, 2011
    • 0 Attachment
      Jeff/Ed,
       
      Either he doesn't have you as a BBS, or does not have "Allow Binary" checked.
       
      73,
      John (one of the old retired guys!)
       
       


      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Jeff - WA4ZKO
      Sent: 25 February 2011 15:58
      To: BPQ32@yahoogroups.com
      Subject: [BPQ32] Re: Forwarding

       

      Ed,
      For giggles, you might try "unchecking" B1 and so forth on your end and see if that makes any difference. Was hoping John or one of the BBS "gurus" would chime in (I know just enough to be dangerous, grin) on your captures.

      Wouldn't make fun of the old retired guys, they're probably the lucky ones. Rest of us may not see retirement till age 90, grin.

      73
      Jeff
      WA4ZKO

      --- In BPQ32@yahoogroups.com, Edward Tune <ottotune@...> wrote:

      >
      > Woof! Quick response.
      >
      > Thanks Jeff.
      >
      > Well, Dale assures me that there is no
      problem down there but again, he is
      > an old retired guy. Will discuss
      that with him again. Thanks!
      >
      > On Fri, Feb 25, 2011 at 2:13 PM,
      Jeff - WA4ZKO <wa4zko@...> wrote:
      >
      > >
      > >
      > > I think that's the response you get if he doesn't have your
      user record
      > > flagged as a BBS on his end.
      > >
      > >
      73
      > > Jeff
      > > WA4ZKO
      > >
      > >
      > >
      --- In BPQ32@yahoogroups.com, "kv7j" <ottotune@> wrote:
      > > >
      > > > Mornin'
      John, et al; from snowy Nevada:
      > > >
      > > > I am having
      a problem with Dale, KJ6IX (other than the one when he comes
      > > into
      my station and bootlegs my call sign)and that is with forwarding.
      > > >
      > > > For some reason I have lost contact with him for
      forwarding. Just went
      > > through again and checked everything and it
      appears to be correct but you
      > > will notice that his SSID only pops
      out with a H to show he supports
      > > H-addressing. No '1' or '2' is
      shown for B1 or B2. I have B1 selected on his
      > > forwarding GUI but of
      course, if he does not respond with one or the other,
      > > I do not
      respond with one back.
      > > >
      > > > Then it sits as a
      normal connect until the timeout time kicks in.
      > > >
      > > > Any idea what Dale is doing wrong (as it can't be my fault!)?
      > > >
      > > > 1.0.4.38 worked fine on install. This has just been going
      on for a few
      > > days so I am assuming it is a 'fat finger' problem
      somewhere.
      > > >
      > > > V/R
      > > >
      > > > Otto, KV7J
      > > >
      > > > ====
      > > >
      > > > 13:51:53T KV7J-4>KJ6IX-4 Port=1 <I C P S3 R2>
      NET/ROM
      > > > KV7J-3 to KJ6IX-4 ttl=25 cct=01C8 <CON REQ> w=4
      KV7J-3 at KV7J-3 t/o=60
      > > > 13:51:54R KJ6IX-4>KV7J-4 Port=1
      <RR R F R4>
      > > > 13:51:54R KJ6IX-4>KV7J-4 Port=1 <I C P
      S2 R4> NET/ROM
      > > > KJ6IX-4 to KV7J-3 ttl=25 cct=01C8 <CON
      ACK> w=4 my cct=00EB
      > > > 13:51:54T KV7J-4>KJ6IX-4 Port=1
      <RR R F R3>
      > > > 13:51:54T KV7J-4>KJ6IX-4 Port=1 <I C P
      S4 R3> NET/ROM
      > > > KV7J-3 to KJ6IX-4 ttl=25 cct=00EB <INFO
      S0 R0>:
      > > > BBS
      > > > 13:51:55R KJ6IX-4>KV7J-4
      Port=1 <RR R F R5>
      > > > 13:51:55R KJ6IX-4>KV7J-4 Port=1
      <I C P S3 R5> NET/ROM
      > > > KJ6IX-4 to KV7J-3 ttl=25 cct=01C8
      <INFO S0 R1>:
      > > > KMEV:KJ6IX-4} Connected to BBS
      > > > 13:51:55T KV7J-4>KJ6IX-4 Port=1 <RR R F R4>
      > > >
      13:51:56R KJ6IX-4>KV7J-4 Port=1 <I C P S4 R5> NET/ROM
      > > >
      KJ6IX-4 to KV7J-3 ttl=25 cct=01C8 <INFO S1 R1>:
      > > >
      [BPQ-1.0.4.38-H$]
      > > > de KJ6IX>
      > > > 13:51:56T
      KV7J-4>KJ6IX-4 Port=1 <RR R F R5>
      > > > 13:51:56T
      KV7J-4>KJ6IX-4 Port=1 <I C P S5 R5> NET/ROM
      > > > KV7J-3 to
      KJ6IX-4 ttl=25 cct=00EB <INFO S1 R2>:
      > > >
      [BPQ-1.0.4.38-H$]
      > > > 13:51:56R KJ6IX-4>KV7J-4 Port=1 <RR R
      F R6>
      > > >
      > >
      > >
      > >
      >

    • Jim
      I am looking for hf pactor forward stations. Jim wu3v
      Message 37 of 37 , Nov 18, 2013
      • 0 Attachment
        I am looking for hf pactor forward stations.
        Jim wu3v
         
      Your message has been successfully submitted and would be delivered to recipients shortly.