Loading ...
Sorry, an error occurred while loading the content.

New BPQ32 Beta release is available in the files section of the BPQ32 Yahoo Group

Expand Messages
  • Ron Stordahl
    A new beta release of BPQ32 is available in the files section of the BPQ32 Yahoo Group: http://groups.yahoo.com/group/BPQ32/files/BPQ32_409u_Beta_20060330 The
    Message 1 of 1 , Mar 30, 2006
    • 0 Attachment
      A new beta release of BPQ32 is available in the files section of the
      BPQ32 Yahoo Group:

      http://groups.yahoo.com/group/BPQ32/files/BPQ32_409u_Beta_20060330

      The details of this release can be found in the document
      BPQ32_409u_Beta_20060306.htm contained in the above folder.

      From the release document:

      7.15 2006/03/30 BPQAXIP resolves URL’s in bpqaxip.cfg every 15 minutes.
      This is valuable as many users have dynamic addresses and use services
      such as www.no-ip.com which will track such changes. Other changes the
      user may make to bpqaxip.cfg can be immediately applied by editing the
      file and then as sysop issuing the command EXTRESTART n m, where n = the
      bpqaxip port number and m = 1. The digit 1 is a flag that is immediately
      set in BPQ32, and regularly checked to determine if bpqaxip.cfg needs to
      be re-read. BPQ32 resets this flag to 0 upon the re-read of bpqaxip.cfg.
      To issue this command you must attain sysop status, which is done
      locally from BPQTerminal by typing ‘password’. Remotely entering
      ‘password’ will require the entry of a password as explained in the file
      password.bpq.

      BPQTelnetServer now provides for CTEXT as configured in
      BPQTelnetServer.cfg.

      Two new parameters L4APPL= and APPLnCALL= , which should follow the
      APPLICATIONS= line, have been added to bpqcfg.txt. L4APPL= controls
      which one of the positional parameters in APPLICATIONS= should be
      executed upon a connection to the BBSALIAS:BBSCALL. APPLnCALL=, for n =
      1 through 8, and all 8 may be stated, define ‘call’s, which when
      connected to will execute the corresponding positional parameter in
      APPLICATIONS=. A more thorough explanation has been added to the example
      bpqcfg.txt files.

      A new release of BPQTNC2.dll resolves a flow control issue.

      Beta testers should update to the new file set. Check for the presence
      of bpq32.dll in C:\Windows\.... If you have previously installed
      bpa32.dll there, you will have to manually replace it with the updated
      version. You may have to execute RegBPQ32.bat from your BPQ32 files
      directory to register the new BPQCtrl.ocx.

      Ron Stordahl, N5IN
    Your message has been successfully submitted and would be delivered to recipients shortly.