Loading ...
Sorry, an error occurred while loading the content.

Paclink cannot acces node

Expand Messages
  • pd4u_dares
    Hi All, I have paclink running on the same PC as BPQ. Paclink can access my RMS PD4U-10 via a VKISS port. But I can t connect to my node PD4U-12 with Paclink
    Message 1 of 3 , Nov 5, 2010
    • 0 Attachment
      Hi All,

      I have paclink running on the same PC as BPQ. Paclink can access my RMS PD4U-10 via a VKISS port. But I can't connect to my node PD4U-12 with Paclink in a script and then access another RMS via AXIP link.

      The first line of my script is C PD4U-12, but after a while Paclink says "connect failed with PD4U-12". And If I use BPQ monitor I see no traffic on either my VKISS port nor my AXIP port.
      While when I connect directly to my RMS (without using a script of course) I see the traffic over my VKISS port.

      If I omit connecting to my own node in the script and try to connect to the node in the first hop. It also fails and no traffic appears over my VKISS port. Paclink then just displays:

      #Begin Connection Script
      #Script(1) C PI1DXC-15
      *** CONNECT PENDING
      *** DISCONNECTED
      *** Connect failure with PI1DXC-15

      Marc
    • John Wiseman
      Marc, This setp works here, to connect to KE7XO-10 via AXIP. My node is G8BPQ-2, and my VCOM port is COM1 This ls the log 2010/11/06 10:54:03 *** Serial port
      Message 2 of 3 , Nov 6, 2010
      • 0 Attachment
        Message
        Marc,
         
        This setp works here, to connect to KE7XO-10 via AXIP. My node is G8BPQ-2, and my VCOM port is COM1
         
         
        This ls the log
         
        2010/11/06 10:54:03 *** Serial port COM1 opened
        2010/11/06 10:54:04 *** KISS TNC Generic KISS KISS mode opened
        2010/11/06 10:54:04 *** Starting Packet Channel: NODE at 2010/11/06 10:54:04
        2010/11/06 10:54:04  #Begin Connection Script
        2010/11/06 10:54:04      #Script(1): C G8BPQ-2
        2010/11/06 10:54:05 *** CONNECTED
        2010/11/06 10:54:05 > Welcome to G8BPQ's Test Switch in Nottingham
        Type ? for list of available commands.
         
        2010/11/06 10:54:05 >
        2010/11/06 10:54:05      #Script(2):COMMANDS
        2010/11/06 10:54:05      #Script(3):C KE7XO-10
        2010/11/06 10:54:08 > BPQ:G8BPQ-2} Connected to NLVRMS:KE7XO-10 
         
        2010/11/06 10:54:08 >
        2010/11/06 10:54:08      #Script(4):NLVRMS
        2010/11/06 10:54:08      #Script(5):
        2010/11/06 10:54:08  #End of Script File...
        2010/11/06 10:54:08 > :KE7XO-10 
        2010/11/06 10:54:09 > BPQ32
        2010/11/06 10:54:09 > Welcome to the BPQ Network
        2010/11/06 10:54:09 > type    i    for a brief file
        2010/11/06 10:54:09 > BPQ32...
        2010/11/06 10:54:09 > [WL2K-2.4.0.6-B2FIHJM$]
        2010/11/06 10:54:10 > SanDiego CMS via KE7XO-10 >
        2010/11/06 10:54:10 < ;FW: GM8BPQ-1 G8BPQ G8BPQ-5 GM8BPQ G8BPQ-1 2E1BHT GM8BPQ-2 BPQTST
        2010/11/06 10:54:10 < [Paclink-4.2.0.0-N01B2FIHM$]
        2010/11/06 10:54:10 < ; G8BPQ-2 DE GM8BPQ-1 (IO92KX) QTC 0...
        2010/11/06 10:54:10 < FF
        2010/11/06 10:54:16 > FC EM 1MT2GXDH48O0 684 453 0
        2010/11/06 10:54:16 > FC EM GGC8MUHDJPNS 669 446 0
        2010/11/06 10:54:16 > FC EM KE9RJ9RY84HV 1199 752 0
        2010/11/06 10:54:16 > F> 46
        2010/11/06 10:54:16 < FS YYY
        2010/11/06 10:54:21 *** 1MT2GXDH48O0 - 961/453 bytes received
        2010/11/06 10:54:23 *** GGC8MUHDJPNS - 946/446 bytes received
        2010/11/06 10:54:30 *** KE9RJ9RY84HV - 1476/752 bytes received
        2010/11/06 10:54:30 < FF
        2010/11/06 10:54:34 > FQ
        2010/11/06 10:54:34 *** DISCONNECT PENDING
        2010/11/06 10:54:35 *** DISCONNECTED
        2010/11/06 10:54:35 *** Closing Packet Channel NODE at 2010/11/06 10:54:35
         
        73,
        John
         
         
        -----Original Message-----
        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of pd4u_dares
        Sent: 06 November 2010 06:46
        To: BPQ32@yahoogroups.com
        Subject: [BPQ32] Paclink cannot acces node

         

        Hi All,

        I have paclink running on the same PC as BPQ. Paclink can access my RMS PD4U-10 via a VKISS port. But I can't connect to my node PD4U-12 with Paclink in a script and then access another RMS via AXIP link.

        The first line of my script is C PD4U-12, but after a while Paclink says "connect failed with PD4U-12". And If I use BPQ monitor I see no traffic on either my VKISS port nor my AXIP port.
        While when I connect directly to my RMS (without using a script of course) I see the traffic over my VKISS port.

        If I omit connecting to my own node in the script and try to connect to the node in the first hop. It also fails and no traffic appears over my VKISS port. Paclink then just displays:

        #Begin Connection Script
        #Script(1) C PI1DXC-15
        *** CONNECT PENDING
        *** DISCONNECTED
        *** Connect failure with PI1DXC-15

        Marc

      • pd4u_dares
        I had the wrong com port defoned in Paclink s TNC chanel. Problem solved. TNX 4 reply John de Marc
        Message 3 of 3 , Nov 6, 2010
        • 0 Attachment
          I had the wrong com port defoned in Paclink's TNC chanel. Problem solved.

          TNX 4 reply John de Marc
          --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
          >
          > Marc,
          >
          > This setp works here, to connect to KE7XO-10 via AXIP. My node is G8BPQ-2,
          > and my VCOM port is COM1
          >
          >
          >
          > This ls the log
          >
          > 2010/11/06 10:54:03 *** Serial port COM1 opened
          > 2010/11/06 10:54:04 *** KISS TNC Generic KISS KISS mode opened
          > 2010/11/06 10:54:04 *** Starting Packet Channel: NODE at 2010/11/06 10:54:04
          > 2010/11/06 10:54:04 #Begin Connection Script
          > 2010/11/06 10:54:04 #Script(1): C G8BPQ-2
          > 2010/11/06 10:54:05 *** CONNECTED
          > 2010/11/06 10:54:05 > Welcome to G8BPQ's Test Switch in Nottingham
          > Type ? for list of available commands.
          >
          > 2010/11/06 10:54:05 >
          > 2010/11/06 10:54:05 #Script(2):COMMANDS
          > 2010/11/06 10:54:05 #Script(3):C KE7XO-10
          > 2010/11/06 10:54:08 > BPQ:G8BPQ-2} Connected to NLVRMS:KE7XO-10
          >
          > 2010/11/06 10:54:08 >
          > 2010/11/06 10:54:08 #Script(4):NLVRMS
          > 2010/11/06 10:54:08 #Script(5):
          > 2010/11/06 10:54:08 #End of Script File...
          > 2010/11/06 10:54:08 > :KE7XO-10
          > 2010/11/06 10:54:09 > BPQ32
          > 2010/11/06 10:54:09 > Welcome to the BPQ Network
          > 2010/11/06 10:54:09 > type i for a brief file
          > 2010/11/06 10:54:09 > BPQ32...
          > 2010/11/06 10:54:09 > [WL2K-2.4.0.6-B2FIHJM$]
          > 2010/11/06 10:54:10 > SanDiego CMS via KE7XO-10 >
          > 2010/11/06 10:54:10 < ;FW: GM8BPQ-1 G8BPQ G8BPQ-5 GM8BPQ G8BPQ-1 2E1BHT
          > GM8BPQ-2 BPQTST
          > 2010/11/06 10:54:10 < [Paclink-4.2.0.0-N01B2FIHM$]
          > 2010/11/06 10:54:10 < ; G8BPQ-2 DE GM8BPQ-1 (IO92KX) QTC 0...
          > 2010/11/06 10:54:10 < FF
          > 2010/11/06 10:54:16 > FC EM 1MT2GXDH48O0 684 453 0
          > 2010/11/06 10:54:16 > FC EM GGC8MUHDJPNS 669 446 0
          > 2010/11/06 10:54:16 > FC EM KE9RJ9RY84HV 1199 752 0
          > 2010/11/06 10:54:16 > F> 46
          > 2010/11/06 10:54:16 < FS YYY
          > 2010/11/06 10:54:21 *** 1MT2GXDH48O0 - 961/453 bytes received
          > 2010/11/06 10:54:23 *** GGC8MUHDJPNS - 946/446 bytes received
          > 2010/11/06 10:54:30 *** KE9RJ9RY84HV - 1476/752 bytes received
          > 2010/11/06 10:54:30 < FF
          > 2010/11/06 10:54:34 > FQ
          > 2010/11/06 10:54:34 *** DISCONNECT PENDING
          > 2010/11/06 10:54:35 *** DISCONNECTED
          > 2010/11/06 10:54:35 *** Closing Packet Channel NODE at 2010/11/06 10:54:35
          >
          >
          > 73,
          > John
          >
          >
          >
          > -----Original Message-----
          > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
          > pd4u_dares
          > Sent: 06 November 2010 06:46
          > To: BPQ32@yahoogroups.com
          > Subject: [BPQ32] Paclink cannot acces node
          >
          >
          >
          >
          > Hi All,
          >
          > I have paclink running on the same PC as BPQ. Paclink can access my RMS
          > PD4U-10 via a VKISS port. But I can't connect to my node PD4U-12 with
          > Paclink in a script and then access another RMS via AXIP link.
          >
          > The first line of my script is C PD4U-12, but after a while Paclink says
          > "connect failed with PD4U-12". And If I use BPQ monitor I see no traffic on
          > either my VKISS port nor my AXIP port.
          > While when I connect directly to my RMS (without using a script of course) I
          > see the traffic over my VKISS port.
          >
          > If I omit connecting to my own node in the script and try to connect to the
          > node in the first hop. It also fails and no traffic appears over my VKISS
          > port. Paclink then just displays:
          >
          > #Begin Connection Script
          > #Script(1) C PI1DXC-15
          > *** CONNECT PENDING
          > *** DISCONNECTED
          > *** Connect failure with PI1DXC-15
          >
          > Marc
          >
        Your message has been successfully submitted and would be delivered to recipients shortly.