Loading ...
Sorry, an error occurred while loading the content.

Re: Winmor and BPQ

Expand Messages
  • STEPHEN
    Yes that was a typo 192.168.0.108 BPQ PC 192.168.0.106 Winmor PC
    Message 1 of 10 , Nov 1, 2010
    • 0 Attachment
      Yes that was a typo 192.168.0.108 BPQ PC 192.168.0.106 Winmor PC

      --- In BPQ32@yahoogroups.com, Peter - ZL2BAU <peter.zl2bau@...> wrote:
      >
      > On 02/11/10 09:39, STEPHEN wrote:
      > >
      > > I did as stated I am recieving error code 10049
      > > if I change it to the address of the PC ie 192-168.0.106 I receive
      > > error code 10061
      > >
      >
      > Hi,
      >
      > Stephen, I hope the *-* between the 192 and 168 is a typo ?
      >
      > Are you on the *same* subnet ?
      >
      > Regards ..... Peter
      >
    • STEPHEN
      The errors are in the BPQ32 Console. Connect failed then error BPQ PC 192.168.0.110 Winmor PC 192.168.0.106 I tried 0.0.0.0 in the Basic Setup Winmor I tried
      Message 2 of 10 , Nov 1, 2010
      • 0 Attachment
        The errors are in the BPQ32 Console.
        Connect failed then error

        BPQ PC 192.168.0.110
        Winmor PC 192.168.0.106

        I tried 0.0.0.0 in the Basic Setup Winmor

        I tried 192.168.0.106 in the BQ32.CFG

        PORT
        PORTNUM=3 ; Optional but sets port number if stated
        ID=WINMOR Port 1 ; Displayed by PORTS command
        TYPE=EXTERNAL ; Calls an external module
        PROTOCOL=WINMOR ; WINMOR protocol is used
        DLLNAME=WINMOR.dll ; Uses WINMOR.dll
        QUALITY=0 ; Can't run NETROM on WINMOR Ports
        CONFIG ; BPQtoWINMOR.cfg has been deprecated. Instead the
        ; BPQtoWINMOR configuration occurs here:

        ADDR 192.168.0.106 8500 ; Use this if you want connects to go to the node.
        CWID True
        DEBUGLOG True
        LOG True
        BW 1600
        DRIVELEVEL 100
        MODE AUTO
        ROBUST False
        SHOW True
        BUSYLOCK False

        ENDPORT

        In termial it lets me see the new port but I can not interact with the TNC



        --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
        >
        > Stephen,
        >
        > Where are you seeing these errors - the TNC or on the BPQ32 console?
        >
        > When you say the address of the PC, do you mean the PC running the TNC or
        > the PC running BPQ32?
        >
        > John
        >
        >
        >
        > -----Original Message-----
        > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
        > STEPHEN
        > Sent: 01 November 2010 20:40
        > To: BPQ32@yahoogroups.com
        > Subject: [BPQ32] Re: Winmor and BPQ
        >
        >
        >
        >
        > I did as stated I am recieving error code 10049
        > if I change it to the address of the PC ie 192-168.0.106 I receive error
        > code 10061
        >
        > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "John
        > Wiseman" <john.wiseman@> wrote:
        > >
        > > Yes, it should work.
        > >
        > > On the Winmor TNC Basic Setup, you need to change TCP Address from
        > 127.0.0.1
        > > to 0.0.0.0, or it will only accept connects from 127.0.0.1
        > >
        > > The code that restarts the TNC after each session won't work if the TNC is
        > > on another machine.
        > >
        > > 73,
        > > John
        > >
        > >
        > >
        > >
        > > -----Original Message-----
        > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
        > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On Behalf
        > Of
        > > STEPHEN
        > > Sent: 01 November 2010 13:45
        > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
        > > Subject: [BPQ32] Winmor and BPQ
        > >
        > >
        > >
        > >
        > > My question is can one run BPQ on one computer and Winmor on a second
        > > computer. I did try to change the IP for 127.0.0.1 port 8500 to the IP of
        > te
        > > second cmputer with no luck, error was given. The reason is the BPQ
        > computer
        > > is running Windows 2000 and will not support Windor, so I am trying to
        > > runnig windor on a XP PC
        > > Any thoughts.......
        > >
        >
      • Bill
        Stephen Dumb question as I have not been following this closely. Is the WINMOR DLL started on the 192.168.0 106 computer? 73 Bill N9ACQ
        Message 3 of 10 , Nov 1, 2010
        • 0 Attachment

          Stephen

                          Dumb question as I have not been following this closely. Is the WINMOR DLL started on the 192.168.0 106 computer?

          73 Bill

          N9ACQ

        • STEPHEN
          Yes Bill the Winmor DLL is started on the the pc with 192.168.0.106 Everything seem to work then I receive the error message that it failed to start.
          Message 4 of 10 , Nov 2, 2010
          • 0 Attachment
            Yes Bill the Winmor DLL is started on the the pc with 192.168.0.106

            Everything seem to work then I receive the error message that it failed to start.

            --- In BPQ32@yahoogroups.com, "Bill" <n9acq@...> wrote:
            >
            > Stephen
            >
            > Dumb question as I have not been following this closely. Is
            > the WINMOR DLL started on the 192.168.0 106 computer?
            >
            > 73 Bill
            >
            > N9ACQ
            >
          • STEPHEN
            I have it working. I wish to thank all for your help. Thanks again Stephen 73 VE9SC
            Message 5 of 10 , Nov 2, 2010
            • 0 Attachment
              I have it working. I wish to thank all for your help.

              Thanks again

              Stephen 73
              VE9SC

              --- In BPQ32@yahoogroups.com, "Bill" <n9acq@...> wrote:
              >
              > Stephen
              >
              > Dumb question as I have not been following this closely. Is
              > the WINMOR DLL started on the 192.168.0 106 computer?
              >
              > 73 Bill
              >
              > N9ACQ
              >
            Your message has been successfully submitted and would be delivered to recipients shortly.