Re: BPQ32 with WinFBB
- Can BPQ transmit the "mail for" beacons that originate in WinFBB.
Can BPQ pass the resync <UI> frames from the various radio ports to
WinFBB and have WinFBB send out the mail headers on the port where
the user requested a resync?
--- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
> Hi Folks,
> I've been away for a few days, so will try to summarize, rather
> to individual posts.
> The TNCPORT.
> ENDPORT stuff is not used by BPQ32. It MAY be used when
> BPQCODE to pass params to BPQHTNC2 - the other option is command
> to BPQHTNC2.
> WinFBB 7.01.35 stores its configuration in the registry, not
> I've found I need to use both WinFBBCFG.exe and WInFBBPorts.exe to
> things to work properly. (but that may be ignorance on my part!)
> Beacons will only be sent to ports that have an UNPROTO= line in
> Monitoring doesn't work with the FBB-supplied BPQ.DLL. I've fixed
> added a facility to run FBB with APPLMASK set to values other than
> if runnnig, say, a DX Cluster and FBB on the same machine). I'll
> this as soon as I've sorted out the documentation
> If I've missed any other questions, plase remind me!.
> John G8BPQ
- Hi John,I replaced the the earlier (jan.) with your new one, i am not sure how to cfg. theports in the bpqcfg.txt with wimfbb 7.01Ai have the UNPROTO=MAIL in the ports 1, 2, and 3 statement, port 4 is myaxip port, in the statement for port 4 I left out the UNPROTO=, then i triedUNPROTO=0 it still send a beacon out on port 4, also is there a way to includea Via in just one port? I tried UNPROTO=MAIL V IQP on port 3 with no luck,in each case i ran the bpqcfg.exe as it is now I have to have the Via in the Beacon1.txt in WinFBB..Mike/N9PMO----- Original Message -----From: John WisemanSent: Thursday, April 06, 2006 4:17 AMSubject: [BPQ32] BPQ32 with WinFBB 7.01.35I've just uploaded a new bpq.dll for use with WinFBB 7.01.35, to
replace the one I posted on 31st March. This adds a means of
controlling which ports are used by WinFBB for sending UI messages.