Loading ...
Sorry, an error occurred while loading the content.
 

Re: [BPQ32] Re: DUAL PORT TNCS

Expand Messages
  • WS7I
    Yep Tekk. Jay ... -- Jay WS7I
    Message 1 of 11 , Sep 21, 2010
      Yep Tekk.
       
      Jay

      On Mon, Sep 20, 2010 at 4:19 PM, Mark Harloff <mharloff@...> wrote:
      Jay,

      I am interested in the radio you are using that
      has a TXD that low (10ms).
      Several of us ran (and still run) GE PSX's that
      will go down to 20ms. The only radios I've been
      able to get (reliably) to run at delays below 20
      or so have been Tekk KS-1000's.
      Several of which I still have and would like to
      part with by the way.
      You can reply direct to my email address unless
      you think anyone else in the group is interested
      in this side bar.

      - Mark K2CAN

      On 9/20/2010 6:05 PM, WS7I wrote:
      >
      >
      > Yes both available but usually Channel=A, and
      > Channel=B
      > PORT
      >     PORTNUM=3      ; KPC 9612
      >     ID=Port2 VHF
      >     TYPE=ASYNC
      >     PROTOCOL=KISS
      >     IOADDR=5
      >     QUALITY=70
      >     SPEED=9600
      >     CHANNEL=A
      >     MAXFRAME=2
      >     TXDELAY=250
      >     SLOTTIME=100
      >     PERSIST=64
      >     FULLDUP=0
      >     FRACK=5000
      >     RESPTIME=1000
      >     RETRIES=10
      >     PACLEN=230
      >     MHEARD=Y
      > ENDPORT
      > PORT
      >     PORTNUM=3      ; KPC 9612
      >     ID=Port3 440.125 Mhz
      >     TYPE=ASYNC
      >     PROTOCOL=KISS
      >     IOADDR=5
      >     SPEED=9600
      >     CHANNEL=B
      >     QUALITY=200
      >     MAXFRAME=4
      >     TXDELAY=100
      >     SLOTTIME=100
      >     PERSIST=64
      >     FULLDUP=0
      >     FRACK=3000
      >     RESPTIME=1000
      >     RETRIES=15
      >     PACLEN=230
      > ENDPORT
      >
      > On Mon, Sep 20, 2010 at 2:45 PM, Jim WU3V
      > <james@... <mailto:james@...>> wrote:
      >
      >     It is automatic normally port 1 is 1200 and
      >     port 2 is 9600.
      >
      >     Jim
      >     James Moore NH0E
      >     http://www.nh0e.net <http://www.nh0e.net/>
      >
      >
      >     ----- Original Message -----
      >     From: "Howard Z" <Howard_Z@...
      >     <mailto:Howard_Z%40yahoo.com>>
      >     To: <BPQ32@yahoogroups.com
      >     <mailto:BPQ32%40yahoogroups.com>>
      >     Sent: Monday, September 20, 2010 21:37
      >     Subject: [BPQ32] Re: DUAL PORT TNCS
      >
      >      > How does one set both ports on the 9612
      >     to be in KISS mode?
      >      >
      >      > Howard
      >      >
      >      >
      >      >
      >      > ------------------------------------
      >      >
      >      > Yahoo! Groups Links
      >      >
      >      >
      >      >
      >
      >
      >
      >
      > --
      > Jay WS7I
      >
      >
      >
      >
      >
      >
      > No virus found in this incoming message.
      > Checked by AVG - www.avg.com
      > Version: 9.0.851 / Virus Database: 271.1.1/3147 - Release Date: 09/20/10 02:35:00
      >


      ------------------------------------

      Yahoo! Groups Links

      <*> To visit your group on the web, go to:
         http://groups.yahoo.com/group/BPQ32/

      <*> Your email settings:
         Individual Email | Traditional

      <*> To change settings online go to:
         http://groups.yahoo.com/group/BPQ32/join
         (Yahoo! ID required)

      <*> To change settings via email:
         BPQ32-digest@yahoogroups.com
         BPQ32-fullfeatured@yahoogroups.com

      <*> To unsubscribe from this group, send an email to:
         BPQ32-unsubscribe@yahoogroups.com

      <*> Your use of Yahoo! Groups is subject to:
         http://docs.yahoo.com/info/terms/




      --
      Jay WS7I

    Your message has been successfully submitted and would be delivered to recipients shortly.