Loading ...
Sorry, an error occurred while loading the content.
 

Winmor test tone

Expand Messages
  • Howard Z
    Hi, It would be nice for the BPQ Winmor Status window to have: o A means to do a two-tone test, and o Adjust & save the drive level. This is not a must have,
    Message 1 of 7 , Sep 8, 2010
      Hi,

      It would be nice for the BPQ Winmor Status window to have:
      o A means to do a two-tone test, and
      o Adjust & save the drive level.

      This is not a must have, but it will be nice.

      Howard
    • John Wiseman
      Howard, Once you have ATTTACHed to your winmor port from BPQTerminal you can use any WINMOR TNC commands, including DRIVELEVEL and TWOTONETEST. Once you have
      Message 2 of 7 , Sep 8, 2010
        Message
        Howard,
         
        Once you have ATTTACHed to your winmor port from BPQTerminal you can use any WINMOR TNC commands, including  DRIVELEVEL and TWOTONETEST. Once you have found the right level, you wil have to maually edit the value in your init file.
         
        I'll add providing a better way of setting up to the "wish list".
         
        73,
        John
         
        -----Original Message-----
        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Howard Z
        Sent: 08 September 2010 16:04
        To: BPQ32@yahoogroups.com
        Subject: [BPQ32] Winmor test tone

         

        Hi,

        It would be nice for the BPQ Winmor Status window to have:
        o A means to do a two-tone test, and
        o Adjust & save the drive level.

        This is not a must have, but it will be nice.

        Howard

      • Dennis Gabler
        I am curious how the WINMOR TNC knows which COM port to toggle DTRRTS on for xmit keying. Tnx es 73, Dennis Dennis G. - W5DG ... From : John
        Message 3 of 7 , Sep 8, 2010
          I am curious how the WINMOR TNC knows which COM port
          to toggle DTRRTS on for xmit keying.

          Tnx es 73,
          Dennis

          Dennis G. - W5DG




          ------- Original Message -------
          From : John Wiseman[mailto:john.wiseman@...]
          Sent : 9/8/2010 10:17:17 AM
          To : BPQ32@yahoogroups.com
          Cc :
          Subject : RE: [BPQ32] Winmor test tone















          Howard,

          Once
          you have ATTTACHed to your winmor port from
          BPQTerminal you can use any WINMOR
          TNC commands, including DRIVELEVEL and TWOTONETEST.
          Once you have
          found the right level, you wil have to maually edit
          the value in your init
          file.

          I'll
          add providing a better way of setting up to the "wish
          list".

          73,
          John



          -----Original Message-----
          From: BPQ32@yahoogroups.com
          [mailto:BPQ32@yahoogroups.com] On Behalf Of Howard Z
          Sent: 08
          September 2010 16:04
          To: BPQ32@yahoogroups.com
          Subject:
          [BPQ32] Winmor test tone



          Hi,

          It would be nice for the BPQ Winmor Status window to
          have:
          o
          A means to do a two-tone test, and
          o Adjust & save the drive
          level.

          This is not a must have, but it will be
          nice.

          Howard
        • John Wiseman
          Dennis, It doesn t. WINMOR TNC sends a message to BPQ telling it when to key and unkey the transmitter. You either use VOX, or use Rigcontrol.cfg to define
          Message 4 of 7 , Sep 8, 2010
            Message
            Dennis,
             
            It doesn't. WINMOR TNC sends a message to BPQ telling it when to key and unkey the transmitter. You either use VOX, or use Rigcontrol.cfg  to define which COM port and control line to use for PTT.
             
            73,
            John
             
            -----Original Message-----
            From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Dennis Gabler
            Sent: 08 September 2010 16:34
            To: BPQ32@yahoogroups.com
            Subject: RE: [BPQ32] Winmor test tone

             


            I am curious how the WINMOR TNC knows which COM port
            to toggle DTRRTS on for xmit keying.

            Tnx es 73,
            Dennis

            Dennis G. - W5DG

            ------- Original Message -------
            From : John Wiseman[mailto:john.wiseman@...]
            Sent : 9/8/2010 10:17:17 AM
            To : BPQ32@yahoogroups.com
            Cc :
            Subject : RE: [BPQ32] Winmor test tone

            Howard,

            Once
            you have ATTTACHed to your winmor port from
            BPQTerminal you can use any WINMOR
            TNC commands, including DRIVELEVEL and TWOTONETEST.
            Once you have
            found the right level, you wil have to maually edit
            the value in your init
            file.

            I'll
            add providing a better way of setting up to the "wish
            list".

            73,
            John


            -----Original Message-----
            From: BPQ32@yahoogroups.com
            [mailto:BPQ32@yahoogroups.com] On Behalf Of Howard Z
            Sent: 08
            September 2010 16:04
            To: BPQ32@yahoogroups.com
            Subject:
            [BPQ32] Winmor test tone

            Hi,

            It would be nice for the BPQ Winmor Status window to
            have:
            o
            A means to do a two-tone test, and
            o Adjust & save the drive
            level.

            This is not a must have, but it will be
            nice.

            Howard

          • Dennis Gabler
            Not using VOX just a Buxcom Rascal on COM7. Do I make a special Winmor entry to the Rigcontrol.cfg file ? Tnx, Dennis ... -- Dennis Gabler - W5DG
            Message 5 of 7 , Sep 8, 2010
              Not using VOX just a Buxcom Rascal on COM7. Do I make a special Winmor entry to the Rigcontrol.cfg file ?

              Tnx,
              Dennis


              On 9/8/2010 10:42 AM, John Wiseman wrote:
               

              Dennis,
               
              It doesn't. WINMOR TNC sends a message to BPQ telling it when to key and unkey the transmitter. You either use VOX, or use Rigcontrol.cfg  to define which COM port and control line to use for PTT.
               
              73,
              John
               
              -----Original Message-----
              From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Dennis Gabler
              Sent: 08 September 2010 16:34
              To: BPQ32@yahoogroups.com
              Subject: RE: [BPQ32] Winmor test tone

               


              I am curious how the WINMOR TNC knows which COM port
              to toggle DTRRTS on for xmit keying.

              Tnx es 73,
              Dennis

              Dennis G. - W5DG

              ------- Original Message -------
              From : John Wiseman[mailto:john.wiseman@...]
              Sent : 9/8/2010 10:17:17 AM
              To : BPQ32@yahoogroups.com
              Cc :
              Subject : RE: [BPQ32] Winmor test tone

              Howard,

              Once
              you have ATTTACHed to your winmor port from
              BPQTerminal you can use any WINMOR
              TNC commands, including DRIVELEVEL and TWOTONETEST.
              Once you have
              found the right level, you wil have to maually edit
              the value in your init
              file.

              I'll
              add providing a better way of setting up to the "wish
              list".

              73,
              John


              -----Original Message-----
              From: BPQ32@yahoogroups.com
              [mailto:BPQ32@yahoogroups.com] On Behalf Of Howard Z
              Sent: 08
              September 2010 16:04
              To: BPQ32@yahoogroups.com
              Subject:
              [BPQ32] Winmor test tone

              Hi,

              It would be nice for the BPQ Winmor Status window to
              have:
              o
              A means to do a two-tone test, and
              o Adjust & save the drive
              level.

              This is not a must have, but it will be
              nice.

              Howard



              -- 
              Dennis Gabler - W5DG
              
              
            • John Wiseman
              See http://www.cantab.net/users/john.wiseman/Documents/RigControl.htm There is sample of
              Message 6 of 7 , Sep 8, 2010
                Message
                 
                There is sample of  PTT control in the example Rigcontrol.cfg file towards the bottom of the page.
                 
                You need something like:
                 
                COM7 19200 PTTONLY

                # For PTT control, specify only a Name and a BPQ Port Number.
                # You can have two RADIO lines, to allow a single COM port to control two WINMOR ports, one using RTS and the other DTR

                RADIO IC7000 3
                 
                you also need the PTT option in the BPQtoWinmor,cfg file PORT line:
                 
                PORT 3 127.0.0.1 8500 PTT DTRRTS              (or just DTR or RTS if you only use one of the lines)
                73,
                John
                 

                -----Original Message-----
                From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Dennis Gabler
                Sent: 08 September 2010 17:02
                To: BPQ32@yahoogroups.com
                Subject: Re: [BPQ32] Winmor test tone

                 

                Not using VOX just a Buxcom Rascal on COM7. Do I make a special Winmor entry to the Rigcontrol.cfg file ?

                Tnx,
                Dennis


                On 9/8/2010 10:42 AM, John Wiseman wrote:

                 

                Dennis,
                 
                It doesn't. WINMOR TNC sends a message to BPQ telling it when to key and unkey the transmitter. You either use VOX, or use Rigcontrol.cfg  to define which COM port and control line to use for PTT.
                 
                73,
                John
                 
                -----Original Message-----
                From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Dennis Gabler
                Sent: 08 September 2010 16:34
                To: BPQ32@yahoogroups.com
                Subject: RE: [BPQ32] Winmor test tone

                 


                I am curious how the WINMOR TNC knows which COM port
                to toggle DTRRTS on for xmit keying.

                Tnx es 73,
                Dennis

                Dennis G. - W5DG

                ------- Original Message -------
                From : John Wiseman[mailto:john.wiseman@...]
                Sent : 9/8/2010 10:17:17 AM
                To : BPQ32@yahoogroups.com
                Cc :
                Subject : RE: [BPQ32] Winmor test tone

                Howard,

                Once
                you have ATTTACHed to your winmor port from
                BPQTerminal you can use any WINMOR
                TNC commands, including DRIVELEVEL and TWOTONETEST.
                Once you have
                found the right level, you wil have to maually edit
                the value in your init
                file.

                I'll
                add providing a better way of setting up to the "wish
                list".

                73,
                John


                -----Original Message-----
                From: BPQ32@yahoogroups.com
                [mailto:BPQ32@yahoogroups.com] On Behalf Of Howard Z
                Sent: 08
                September 2010 16:04
                To: BPQ32@yahoogroups.com
                Subject:
                [BPQ32] Winmor test tone

                Hi,

                It would be nice for the BPQ Winmor Status window to
                have:
                o
                A means to do a two-tone test, and
                o Adjust & save the drive
                level.

                This is not a must have, but it will be
                nice.

                Howard



                -- 
                Dennis Gabler - W5DG
                
                

              • Dennis Gabler
                Thanks you John.Dennis G. - W5DG------- Original Message ------- From : John Wiseman[mailto:john.wiseman@cantab.net] Sent : 9/8/2010 11:32:08 AM
                Message 7 of 7 , Sep 8, 2010
                  Thanks you John.

                  Dennis G. - W5DG




                  ------- Original Message -------
                  From : John Wiseman[mailto:john.wiseman@...]
                  Sent : 9/8/2010 11:32:08 AM
                  To : BPQ32@yahoogroups.com
                  Cc :
                  Subject : RE: [BPQ32] Winmor test tone















                  See
                  http://www.cantab.net/users/john.wiseman/Documents/RigControl.htm

                  There
                  is sample of PTT control in the example
                  Rigcontrol.cfg file towards the
                  bottom of the page.

                  You
                  need something like:

                  COM7 19200 PTTONLY

                  # For PTT control, specify only
                  a Name and a BPQ Port Number.
                  # You can have two RADIO lines, to allow a
                  single COM port to control two WINMOR ports, one
                  using RTS and the other
                  DTR

                  RADIO IC7000 3

                  you also need the
                  PTT option in the BPQtoWinmor,cfg file PORT line:

                  PORT 3 127.0.0.1 8500 PTT
                  DTRRTS (or just DTR or RTS if you only
                  use one of the
                  lines)

                  73,
                  John



                  -----Original Message-----
                  From: BPQ32@yahoogroups.com
                  [mailto:BPQ32@yahoogroups.com] On Behalf Of Dennis
                  Gabler
                  Sent: 08 September 2010 17:02
                  To:
                  BPQ32@yahoogroups.com
                  Subject: Re: [BPQ32] Winmor test
                  tone



                  Not using VOX just a Buxcom Rascal on COM7. Do I
                  make a special Winmor
                  entry to the Rigcontrol.cfg file ?

                  Tnx,
                  Dennis


                  On
                  9/8/2010 10:42 AM, John Wiseman wrote:



                  Dennis,

                  It
                  doesn't. WINMOR TNC sends a message to BPQ
                  telling it when to key and unkey
                  the transmitter. You either use VOX, or use
                  Rigcontrol.cfg to define
                  which COM port and control line to use for PTT.

                  73,
                  John


                  -----Original Message-----
                  From: BPQ32@yahoogroups.com
                  [mailto:BPQ32@yahoogroups.com]
                  On Behalf Of Dennis Gabler
                  Sent: 08 September 2010
                  16:34
                  To: BPQ32@yahoogroups.com
                  Subject:
                  RE: [BPQ32] Winmor test tone




                  I am curious how the WINMOR TNC knows which COM port
                  to toggle
                  DTRRTS on for xmit keying.

                  Tnx es 73,
                  Dennis

                  Dennis G. -
                  W5DG

                  ------- Original Message -------
                  From : John
                  Wiseman[mailto:john.wiseman@...]
                  Sent : 9/8/2010 10:17:17
                  AM
                  To : BPQ32@yahoogroups.com
                  Cc :
                  Subject : RE: [BPQ32]
                  Winmor test tone

                  Howard,

                  Once
                  you have ATTTACHed to your
                  winmor port from
                  BPQTerminal you can use any WINMOR
                  TNC commands,
                  including DRIVELEVEL and TWOTONETEST.
                  Once you have
                  found the right
                  level, you wil have to maually edit
                  the value in your init

                  file.

                  I'll
                  add providing a better way of setting up to the
                  "wish
                  list".

                  73,
                  John


                  -----Original
                  Message-----
                  From: BPQ32@yahoogroups.com
                  [mailto:BPQ32@yahoogroups.com] On Behalf Of Howard Z
                  Sent: 08

                  September 2010 16:04
                  To: BPQ32@yahoogroups.com
                  Subject:
                  [BPQ32] Winmor test
                  tone

                  Hi,

                  It would be nice for the BPQ Winmor Status window
                  to
                  have:
                  o
                  A means to do a two-tone test, and
                  o Adjust &
                  save the drive
                  level.

                  This is not a must have, but it will be

                  nice.

                  Howard



                  --
                  Dennis Gabler - W5DG
                Your message has been successfully submitted and would be delivered to recipients shortly.