Loading ...
Sorry, an error occurred while loading the content.

RE: [BPQ32] Traffic one way only?

Expand Messages
  • John Wiseman
    This sounds as if it could be an axip resolver issue. Can you check with Wireshark if the frames are actually going out on the LAN? Thanks, John ... From:
    Message 1 of 2 , Mar 8, 2010
    • 0 Attachment
      Message
      This sounds as if it could be an axip resolver issue. Can you check with Wireshark if the frames are actually going out on the LAN?
       
      Thanks,
       
      John
       
      -----Original Message-----
      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Keith
      Sent: 08 March 2010 11:43
      To: BPQ32@yahoogroups.com
      Subject: [BPQ32] Traffic one way only?

       

      I have found out why BPPQ32 didn't appear to pass re-synch frames, the problem is the xrouter node at the other end of my AXip port is not seeing anything sent from BPQ32 but BPQ32 is seeing anything sent by Xrouter. I can connect to the BPQ32 Node using Sally or BPQ Terminal and both programmes show frames being transmitted by themselves but they are not appearing the other end of the LAN.
      BPQ Port settings

      ; AX/IP/UDP port definition.

      PORT
      PORTNUM=1 ; Optional but sets port number if stated
      ID=AX/IP/UDP ; Displayed by PORTS command
      TYPE=EXTERNAL ; Calls an external module
      DLLNAME=BPQAXIP. DLL ; Uses BPQAXIP.DLL
      QUALITY=192 ; Quality factor applied to node broadcasts heard on
      ; this port, unless overridden by a locked route
      ; entry. Setting to 0 stops node broadcasts
      MINQUAL=168 ; Entries in the nodes table with qualities greater or
      ; equal to MINQUAL will be sent on this port. A value
      ; of 0 sends everything.
      MAXFRAME=7 ; Max outstanding frames (1 thru 7)
      FRACK=3000 ; Level 2 timout in milliseconds
      RESPTIME=1000 ; Level 2 delayed ack timer in milliseconds
      RETRIES=5 ; Level 2 maximum retry value
      PACLEN=236 ; Max = 236
      UNPROTO=MAIL :
      ENDPORT

      Xrouter Port Settings
      INTERFACE=8
      TYPE=AXUDP
      MTU=256
      ENDINTERFACE

      PORT=5
      ID=AXUDP link to PMS
      INTERFACENUM= 8
      UDPLOCAL=93
      UDPREMOTE=93
      IPLINK=192.168. 0.15
      MINQUAL=10
      FRACK 2000
      RESPTIME=200
      RFBAUDS=56000 ; controls TCP window/nodes broadcasts
      QUALITY=10 ; disable all L3/L4 on this port
      NODESINTERVAL= 60
      CFLAGS=15 ; allow up/down links/stop L3RTT
      MAXHOPS=0 ; limits time domain horizon to 2 hops
      MAXTT=0 ; limits time domain horizon
      PROXY=GB7SOU, BBSSOU
      MHEARD=10
      SYSOP=1
      ENDPORT

      Dont think it is the Xrouter settings causing the problem as it works fine with AGWPe

      73 de Keith G1GXB


    Your message has been successfully submitted and would be delivered to recipients shortly.