Loading ...
Sorry, an error occurred while loading the content.
 

Re: [BPQ32] Help...link...XNET-BPQ32-ARcluster

Expand Messages
  • IK2XDE Andrea
    Hi, *************************************** IR2UBX-10 (XNET node) listen on UDP 93 send on UDP 94 Of course, on XNET amake alink as follow: att ip1 axudp 1
    Message 1 of 5 , Feb 10, 2010
      Hi,

      ***************************************
      IR2UBX-10 (XNET node)
      listen on UDP 93
      send on UDP 94

      Of course, on XNET amake alink as follow:

      att ip1 axudp 1 1 l93 d94 127.0.0.1
      po 1 baud 256000
      po 1 name UDPLINK
      po 1 per 255
      po 1 DUP 1
      po 1 txd 2
      po 1 win 7

      ro local add 18 IK2XDE-9 ND
      ro local add 18 IK2XDE-14 ND
      *********************************************


      BQP32 (bpqaxip.cfg)
      listen on UDP 94
      send on UDP 93

      ; Config file for BPQAXIP

      MHEARD ON
      UDP 94
      AUTOADDMAP
      MAP IR2UBX-10 127.0.0.1 KEEPALIVE 180 UDP 93
      MAP NODES 127.0.0.1 UDP 93

      *************************************************


      Other question is if all other setting is ok,
      for example, is correct to call node IK2XDE-14....??

      Is correct to make e "Locked routes"
      with IK2XDE-9 (AR Cluster)
      or i will put IK2XDE-14....??

      How to declare a link BPQ32 (IK2XDE-14) and ARcluster (IK2XDE-9)

      Thanks.




      On 2/10/2010 3:44 PM, IK2XDE Andrea wrote:

      Hi,
      can someone help me to setup a link
      with: XNET <-> BPQ32 <-> ARcluster

      All run on the same machine under Windowx XP-Pro SP3

      IR2UBX-10 XNET node
      IK2XDE-14 BPQ node...???
      IK2XDE-9 ARCluster

      I know that I will make an UDP link XNET<->BPQ,
      but i dont know how....

      I try this solution, but dont work fine:

      XNET node is IR2UBX-10 listen on UDP 93

      *************************************
      ; Config file for BPQAXIP
      MHEARD ON
      UDP 10094
      AUTOADDMAP
      MAP IR2UBX-10 127.0.0.1 KEEPALIVE 180 UDP 10093
      MAP NODES 127.0.0.1 UDP 10093
      *************************************

      *************************************
      ;;;;; BPQCONFIG file

      HOSTINTERRUPT=127
      EMS=0
      DESQVIEW=0
      NODECALL=IK2XDE-14
      NODEALIAS=XDENOD
      ;
      ; CTEXT deleted
      ;

      ; Network System Parameters:
      OBSINIT=6
      OBSMIN=4
      NODESINTERVAL=15
      IDINTERVAL=60
      BTINTERVAL=60
      L3TIMETOLIVE=25
      L4RETRIES=3
      L4TIMEOUT=60
      L4DELAY=10
      L4WINDOW=4
      MAXLINKS=63
      MAXNODES=128
      MAXROUTES=64
      MAXCIRCUITS=128
      MINQUAL=168
      MAXHOPS=4
      MAXRTT=90
      BUFFERS=255

      ; TNC default parameters:

      PACLEN=236 ; Max packet size (236 max for net/rom)
      TRANSDELAY=1 ; Transparent node send delay in seconds

      ; Level 2 Parameters:

      T3=60
      IDLETIME=720

      ; Configuration Options:

      AUTOSAVE=1
      BBS=1
      NODE=1
      HIDENODES=1
      ENABLE_LINKED=N

      ; Port Definitions:

      ; AX/IP/UDP port definition:

      PORT
      PORTNUM=1
      ID=UDP link
      TYPE=EXTERNAL
      DLLNAME=BPQAXIP.DLL
      QUALITY=192
      MINQUAL=168
      MAXFRAME=5
      FRACK=3000
      RESPTIME=1000
      RETRIES=5
      PACLEN=236
      ENDPORT

      ROUTES: ; Locked routes (31 maximum)
      IK2XDE-9,255,1 ; BPQ AX/UPD to production machine
    • IK2XDE Andrea
      MessageHi, *************************************** IR2UBX-10 (XNET node) listen on UDP 93 send on UDP 94 Of course, on XNET amake alink as follow: att ip1
      Message 2 of 5 , Feb 10, 2010
        MessageHi,

        ***************************************
        IR2UBX-10 (XNET node)
        listen on  UDP 93
        send  on  UDP 94

        Of course, on XNET amake alink as follow:

        att ip1 axudp 1 1 l93 d94 127.0.0.1
        po 1 baud 256000
        po 1 name UDPLINK
        po 1 per 255
        po 1 DUP 1
        po 1 txd 2
        po 1 win 7

        ro local add 18 IK2XDE-9 ND
        ro local add 18 IK2XDE-14 ND
        *********************************************


        BQP32 (bpqaxip.cfg)
        listen on UDP 94
        send  on UDP 93

        ; Config file for BPQAXIP

        MHEARD ON
        UDP 94
        AUTOADDMAP
        MAP IR2UBX-10 127.0.0.1 KEEPALIVE 180 UDP 93
        MAP NODES 127.0.0.1 UDP 93

        *************************************************


        Other question is if all other setting is ok,
        for example, is correct to call node  IK2XDE-14....??

        Is correct to make e  "Locked routes"
        with IK2XDE-9 (AR Cluster)
        or i will put IK2XDE-14....??

        How to declare a link  BPQ32 (IK2XDE-14)  and ARcluster (IK2XDE-9)

        Thanks.

         
         
         
        ----- Original Message -----
        Sent: Wednesday, February 10, 2010 11:10 PM
        Subject: RE: [BPQ32] Help...link...XNET-BPQ32-ARcluster

        You are sending to IR2UB-10 on UDP Port 10093, but say XNET is listening on UDP 93.
         
        If XNET is also sending on 93, you need a UDP 93 in bpqaxip.cfg.
         
        73
        John G8BPQ
         
      Your message has been successfully submitted and would be delivered to recipients shortly.