Loading ...
Sorry, an error occurred while loading the content.
 

Re: [BPQ32] Help...link...XNET-BPQ32-ARcluster

Expand Messages
  • K.O. Higgs
    You listen on 10094 and transmit on 10093?? On 2/10/2010 3:44 PM, IK2XDE Andrea wrote: Hi, can someone help me to setup a link with: XNET BPQ32
    Message 1 of 5 , Feb 10, 2010
      You listen on 10094 and transmit on 10093??

      On 2/10/2010 3:44 PM, IK2XDE Andrea wrote:
       

      Hi,
      can someone help me to setup a link
      with: XNET <-> BPQ32 <-> ARcluster

      All run on the same machine under Windowx XP-Pro SP3

      IR2UBX-10 XNET node
      IK2XDE-14 BPQ node...???
      IK2XDE-9 ARCluster

      I know that I will make an UDP link XNET<->BPQ,
      but i dont know how....

      I try this solution, but dont work fine:

      XNET node is IR2UBX-10 listen on UDP 93

      ************ ********* ********* *******
      ; Config file for BPQAXIP
      MHEARD ON
      UDP 10094
      AUTOADDMAP
      MAP IR2UBX-10 127.0.0.1 KEEPALIVE 180 UDP 10093
      MAP NODES 127.0.0.1 UDP 10093
      ************ ********* ********* *******

      ************ ********* ********* *******
      ;;;;; BPQCONFIG file

      HOSTINTERRUPT= 127
      EMS=0
      DESQVIEW=0
      NODECALL=IK2XDE- 14
      NODEALIAS=XDENOD
      ;
      ; CTEXT deleted
      ;

      ; Network System Parameters:
      OBSINIT=6
      OBSMIN=4
      NODESINTERVAL= 15
      IDINTERVAL=60
      BTINTERVAL=60
      L3TIMETOLIVE= 25
      L4RETRIES=3
      L4TIMEOUT=60
      L4DELAY=10
      L4WINDOW=4
      MAXLINKS=63
      MAXNODES=128
      MAXROUTES=64
      MAXCIRCUITS= 128
      MINQUAL=168
      MAXHOPS=4
      MAXRTT=90
      BUFFERS=255

      ; TNC default parameters:

      PACLEN=236 ; Max packet size (236 max for net/rom)
      TRANSDELAY=1 ; Transparent node send delay in seconds

      ; Level 2 Parameters:

      T3=60
      IDLETIME=720

      ; Configuration Options:

      AUTOSAVE=1
      BBS=1
      NODE=1
      HIDENODES=1
      ENABLE_LINKED= N

      ; Port Definitions:

      ; AX/IP/UDP port definition:

      PORT
      PORTNUM=1
      ID=UDP link
      TYPE=EXTERNAL
      DLLNAME=BPQAXIP. DLL
      QUALITY=192
      MINQUAL=168
      MAXFRAME=5
      FRACK=3000
      RESPTIME=1000
      RETRIES=5
      PACLEN=236
      ENDPORT

      ROUTES: ; Locked routes (31 maximum)
      IK2XDE-9,255, 1 ; BPQ AX/UPD to production machine


      -- 
      
      K.O. Higgs 
      n0kfq@...
      
      
    • John Wiseman
      You are sending to IR2UB-10 on UDP Port 10093, but say XNET is listening on UDP 93. If XNET is also sending on 93, you need a UDP 93 in bpqaxip.cfg. 73 John
      Message 2 of 5 , Feb 10, 2010
        Message
        You are sending to IR2UB-10 on UDP Port 10093, but say XNET is listening on UDP 93.
         
        If XNET is also sending on 93, you need a UDP 93 in bpqaxip.cfg.
         
        73
        John G8BPQ
         
         
        -----Original Message-----
        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of IK2XDE Andrea
        Sent: 10 February 2010 21:44
        To: BPQ32@yahoogroups.com
        Subject: [BPQ32] Help...link...XNET-BPQ32-ARcluster

         

        Hi,
        can someone help me to setup a link
        with: XNET <-> BPQ32 <-> ARcluster

        All run on the same machine under Windowx XP-Pro SP3

        IR2UBX-10 XNET node
        IK2XDE-14 BPQ node...???
        IK2XDE-9 ARCluster

        I know that I will make an UDP link XNET<->BPQ,
        but i dont know how....

        I try this solution, but dont work fine:

        XNET node is IR2UBX-10 listen on UDP 93

        ************ ********* ********* *******
        ; Config file for BPQAXIP
        MHEARD ON
        UDP 10094
        AUTOADDMAP
        MAP IR2UBX-10 127.0.0.1 KEEPALIVE 180 UDP 10093
        MAP NODES 127.0.0.1 UDP 10093
        ************ ********* ********* *******

        ************ ********* ********* *******
        ;;;;; BPQCONFIG file

        HOSTINTERRUPT= 127
        EMS=0
        DESQVIEW=0
        NODECALL=IK2XDE- 14
        NODEALIAS=XDENOD
        ;
        ; CTEXT deleted
        ;

        ; Network System Parameters:
        OBSINIT=6
        OBSMIN=4
        NODESINTERVAL= 15
        IDINTERVAL=60
        BTINTERVAL=60
        L3TIMETOLIVE= 25
        L4RETRIES=3
        L4TIMEOUT=60
        L4DELAY=10
        L4WINDOW=4
        MAXLINKS=63
        MAXNODES=128
        MAXROUTES=64
        MAXCIRCUITS= 128
        MINQUAL=168
        MAXHOPS=4
        MAXRTT=90
        BUFFERS=255

        ; TNC default parameters:

        PACLEN=236 ; Max packet size (236 max for net/rom)
        TRANSDELAY=1 ; Transparent node send delay in seconds

        ; Level 2 Parameters:

        T3=60
        IDLETIME=720

        ; Configuration Options:

        AUTOSAVE=1
        BBS=1
        NODE=1
        HIDENODES=1
        ENABLE_LINKED= N

        ; Port Definitions:

        ; AX/IP/UDP port definition:

        PORT
        PORTNUM=1
        ID=UDP link
        TYPE=EXTERNAL
        DLLNAME=BPQAXIP. DLL
        QUALITY=192
        MINQUAL=168
        MAXFRAME=5
        FRACK=3000
        RESPTIME=1000
        RETRIES=5
        PACLEN=236
        ENDPORT

        ROUTES: ; Locked routes (31 maximum)
        IK2XDE-9,255, 1 ; BPQ AX/UPD to production machine

      • IK2XDE Andrea
        Hi, *************************************** IR2UBX-10 (XNET node) listen on UDP 93 send on UDP 94 Of course, on XNET amake alink as follow: att ip1 axudp 1
        Message 3 of 5 , Feb 10, 2010
          Hi,

          ***************************************
          IR2UBX-10 (XNET node)
          listen on UDP 93
          send on UDP 94

          Of course, on XNET amake alink as follow:

          att ip1 axudp 1 1 l93 d94 127.0.0.1
          po 1 baud 256000
          po 1 name UDPLINK
          po 1 per 255
          po 1 DUP 1
          po 1 txd 2
          po 1 win 7

          ro local add 18 IK2XDE-9 ND
          ro local add 18 IK2XDE-14 ND
          *********************************************


          BQP32 (bpqaxip.cfg)
          listen on UDP 94
          send on UDP 93

          ; Config file for BPQAXIP

          MHEARD ON
          UDP 94
          AUTOADDMAP
          MAP IR2UBX-10 127.0.0.1 KEEPALIVE 180 UDP 93
          MAP NODES 127.0.0.1 UDP 93

          *************************************************


          Other question is if all other setting is ok,
          for example, is correct to call node IK2XDE-14....??

          Is correct to make e "Locked routes"
          with IK2XDE-9 (AR Cluster)
          or i will put IK2XDE-14....??

          How to declare a link BPQ32 (IK2XDE-14) and ARcluster (IK2XDE-9)

          Thanks.




          On 2/10/2010 3:44 PM, IK2XDE Andrea wrote:

          Hi,
          can someone help me to setup a link
          with: XNET <-> BPQ32 <-> ARcluster

          All run on the same machine under Windowx XP-Pro SP3

          IR2UBX-10 XNET node
          IK2XDE-14 BPQ node...???
          IK2XDE-9 ARCluster

          I know that I will make an UDP link XNET<->BPQ,
          but i dont know how....

          I try this solution, but dont work fine:

          XNET node is IR2UBX-10 listen on UDP 93

          *************************************
          ; Config file for BPQAXIP
          MHEARD ON
          UDP 10094
          AUTOADDMAP
          MAP IR2UBX-10 127.0.0.1 KEEPALIVE 180 UDP 10093
          MAP NODES 127.0.0.1 UDP 10093
          *************************************

          *************************************
          ;;;;; BPQCONFIG file

          HOSTINTERRUPT=127
          EMS=0
          DESQVIEW=0
          NODECALL=IK2XDE-14
          NODEALIAS=XDENOD
          ;
          ; CTEXT deleted
          ;

          ; Network System Parameters:
          OBSINIT=6
          OBSMIN=4
          NODESINTERVAL=15
          IDINTERVAL=60
          BTINTERVAL=60
          L3TIMETOLIVE=25
          L4RETRIES=3
          L4TIMEOUT=60
          L4DELAY=10
          L4WINDOW=4
          MAXLINKS=63
          MAXNODES=128
          MAXROUTES=64
          MAXCIRCUITS=128
          MINQUAL=168
          MAXHOPS=4
          MAXRTT=90
          BUFFERS=255

          ; TNC default parameters:

          PACLEN=236 ; Max packet size (236 max for net/rom)
          TRANSDELAY=1 ; Transparent node send delay in seconds

          ; Level 2 Parameters:

          T3=60
          IDLETIME=720

          ; Configuration Options:

          AUTOSAVE=1
          BBS=1
          NODE=1
          HIDENODES=1
          ENABLE_LINKED=N

          ; Port Definitions:

          ; AX/IP/UDP port definition:

          PORT
          PORTNUM=1
          ID=UDP link
          TYPE=EXTERNAL
          DLLNAME=BPQAXIP.DLL
          QUALITY=192
          MINQUAL=168
          MAXFRAME=5
          FRACK=3000
          RESPTIME=1000
          RETRIES=5
          PACLEN=236
          ENDPORT

          ROUTES: ; Locked routes (31 maximum)
          IK2XDE-9,255,1 ; BPQ AX/UPD to production machine
        • IK2XDE Andrea
          MessageHi, *************************************** IR2UBX-10 (XNET node) listen on UDP 93 send on UDP 94 Of course, on XNET amake alink as follow: att ip1
          Message 4 of 5 , Feb 10, 2010
            MessageHi,

            ***************************************
            IR2UBX-10 (XNET node)
            listen on  UDP 93
            send  on  UDP 94

            Of course, on XNET amake alink as follow:

            att ip1 axudp 1 1 l93 d94 127.0.0.1
            po 1 baud 256000
            po 1 name UDPLINK
            po 1 per 255
            po 1 DUP 1
            po 1 txd 2
            po 1 win 7

            ro local add 18 IK2XDE-9 ND
            ro local add 18 IK2XDE-14 ND
            *********************************************


            BQP32 (bpqaxip.cfg)
            listen on UDP 94
            send  on UDP 93

            ; Config file for BPQAXIP

            MHEARD ON
            UDP 94
            AUTOADDMAP
            MAP IR2UBX-10 127.0.0.1 KEEPALIVE 180 UDP 93
            MAP NODES 127.0.0.1 UDP 93

            *************************************************


            Other question is if all other setting is ok,
            for example, is correct to call node  IK2XDE-14....??

            Is correct to make e  "Locked routes"
            with IK2XDE-9 (AR Cluster)
            or i will put IK2XDE-14....??

            How to declare a link  BPQ32 (IK2XDE-14)  and ARcluster (IK2XDE-9)

            Thanks.

             
             
             
            ----- Original Message -----
            Sent: Wednesday, February 10, 2010 11:10 PM
            Subject: RE: [BPQ32] Help...link...XNET-BPQ32-ARcluster

            You are sending to IR2UB-10 on UDP Port 10093, but say XNET is listening on UDP 93.
             
            If XNET is also sending on 93, you need a UDP 93 in bpqaxip.cfg.
             
            73
            John G8BPQ
             
          Your message has been successfully submitted and would be delivered to recipients shortly.