Loading ...
Sorry, an error occurred while loading the content.
 

Re: [BPQ32] Adding Port 3

Expand Messages
  • bryan randy
    John, Itt sounds like the same thing if so then maybe want need that program, would help with having to spend money to put up on a another node., thank you
    Message 1 of 11 , Jan 11, 2010
      John,  Itt sounds like the same thing if so then maybe want need that program, would help with having to spend money to put up on a another node.,
      thank you for your fine work and great programs
      Randy
         
      ----- Original Message -----
      Sent: Monday, January 11, 2010 10:41 AM
      Subject: RE: [BPQ32] Adding Port 3

       

      Yes, BPQ has a loopback port - configure with TYPE=INTERNAL. It loops transmitted frames back to the node. I don't know if that is the same as an AGW loopback.
       
      73,
      John G8BPQ
       
       
       
       
       
       
      -----Original Message-----
      From: BPQ32@yahoogroups. com [mailto:BPQ32@ yahoogroups. com] On Behalf Of bryan randy
      Sent: 11 January 2010 16:31
      To: BPQ32@yahoogroups. com
      Subject: Re: [BPQ32] Adding Port 3

       

      Hi John, just wondering if the bpq has a option like the agwpro that allows for a loopback port.
      Randy
       
      ----- Original Message -----
      Sent: Saturday, January 09, 2010 1:23 PM
      Subject: RE: [BPQ32] Adding Port 3

       

      Dale,
       
      The KAM should work fine. Depending which port you want to use, you may need to change CHANNEL to B - or to use both ports, create two port entries. one with CHANNEL=A and the other CHANNEL=B.
       
      Remember that the TNC must be put into KISS mode before starting BPQ32.
       
      73,
      John
       
      -----Original Message-----
      From: BPQ32@yahoogroups. com [mailto:BPQ32@ yahoogroups. com] On Behalf Of kj6ix@verizon. net
      Sent: 09 January 2010 19:13
      To: BPQ32@yahoogroups. com
      Subject: [BPQ32] Adding Port 3

       

      I added a port 3 to my bpqcfg.fle, I copied my port 2 which im using a Tnc-2 set up in the kiss mode. Port 3 is also a rf port. The Tnc is a Kamtronics KamPlus can this be used as a tnc for this application or must I locate another Tnc2 ? If indeed I can use the KamPlus Tnc what changes must I do to the bpqcfg.file ?
      Dale

    Your message has been successfully submitted and would be delivered to recipients shortly.