Loading ...
Sorry, an error occurred while loading the content.
 

Re: Digest Number 611

Expand Messages
  • PD0SNK
    Already found out. Installed a clean bpq and found the settings in the bpqcfg.txt: ; INP3 Routing is experimental. The two parms which follow will be ignored
    Message 1 of 2 , Dec 26, 2009
      Already found out.

      Installed a clean bpq and found the settings in the bpqcfg.txt:

      ; INP3 Routing is experimental. The two parms which follow will be ignored
      ; unless activated in the ROUTES: section.
      MAXHOPS=4 ; INP3 hop limit to add to tables
      MAXRTT=90 ; INP3 max RTT in seconds
      BUFFERS=255 ; Packet buffers - 255 means allocate as many as
      ; possible, normally about 130, depending upon other
      ; table sizes.

      Normaly i don't see this becouse i upgrade from an older version hi.

      Danny.

      Ps. in Xrouter days we used maxrtt=50 and maxhops=2 to and a net/rom quality of 10 for locked routes.

      This worked ok then but now might need some tuning.

      73's Danny PD0SNK

      --- In BPQ32@yahoogroups.com, "Danny Oudendag PD0SNK/NL2SNE" <pd0snk@...> wrote:
      >
      > BPQ32Hi Group.
      >
      > How do i use the MAXTT and MAXHOPS in the bpqcfg.txt ?
      >
      > Danny PD0SNK.
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.