Loading ...
Sorry, an error occurred while loading the content.
 

Re: [BPQ32] HF Forwarding time out

Expand Messages
  • Peter Mallett
    ... Hi Jerry, I should have asked what system you are running in the way of FBB ? Do you have a command `O` in your forward file ? Is the Timeout actually
    Message 1 of 11 , Aug 28, 2009
      Jerry - N9LYA wrote:
       

      HI James.. Ok let me know...

      -----Original Message-----
      From: BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com] On Behalf Of
      james@...
      Sent: Thursday, August 27, 2009 8:54 PM
      To: BPQ32@yahoogroups. com
      Subject: Re: [BPQ32] HF Forwarding time out

      You are a bit old for that!
      Hee hee

      WU3V
      via BlackBerry

      -----Original Message-----
      From: WS7I <ws7ik7tj@gmail. com>

      Date: Thu, 27 Aug 2009 17:05:36
      To: <BPQ32@yahoogroups. com>
      Subject: Re: [BPQ32] HF Forwarding time out

      300 Ms I would say. Used to run HF on 10 Mhz cluster to cluster. Let
      me see if I can find those old files.

      On Thu, Aug 27, 2009 at 3:48 PM, Jerry - N9LYA<n9lya@blueriver. net> wrote:
      >
      >
      > Hi Guys.. I am setting HF forwarding on 40 meters to KQ0I and we get going
      > very well.. But shortly I send a disconnect. It says it's Timeout!!!
      >
      >
      >
      > It does not seem like much time had passed since forwarding started. Band
      is
      > somewhat bad But even when good I send this disconnect.. Any ideas.
      >
      >
      >
      > Maybe something is set to a short time delay because I never forwarded on
      HF
      > with this setup of BPQ32/FBB
      >
      >
      >
      > If anyone has a guess??
      >
      >
      >
      > 73 jerry
      >
      >
      >
      >
      >
      >
      >
      > 73 Jerry Kutche N9LYA
      >
      > ARRL Net Manager Indiana Section - Packet Net
      >
      > HF Skipnet Coordinator
      >
      > IP Coordinator Indiana
      >
      > Packet Coordinator Indiana
      >
      > http://www.n9lya. com
      >
      > http://www.w9otr. org
      >
      > http://www.indianap acketcouncil. org
      >
      > http://www.mitchell wx.com
      >
      >
      >
      >

      --
      Jay WS7I

      ------------ --------- --------- ------

      Yahoo! Groups Links

      ------------ --------- --------- ------

      Yahoo! Groups Links


      Hi Jerry,

                   I should have asked what system you are running in the way of FBB ?

      Do you have a command `O` in your forward file ?

      Is the Timeout actually being sent from your FBB or the other end ?

      Regards ..... Peter

    • D Calder
      Yes, it won t have any effect. If it doesn t see him in a couple minutes, it s done for me on my 20 Meter port. Is there any errors? Or he just goes away?
      Message 2 of 11 , Aug 28, 2009

        Yes, it won’t have any effect. If it doesn’t see him in a couple minutes, it’s done for me on my 20 Meter

        port. Is there any errors? Or he just goes away?

         

         

         

        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Jerry - N9LYA
        Sent: Friday, August 28, 2009 5:04 AM
        To: BPQ32@yahoogroups.com
        Subject: RE: [BPQ32] HF Forwarding time out

         

         

        Hi Peter.. Thanks for the idea.. I did try it was set at 10 minutes.. But the timeout occurs in less then two minutes of a forwarding session???

         

        Changing this setting did not delay the time out any longer…

         

        Many thanks Jerry

         


        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Peter Mallett
        Sent: Thursday, August 27, 2009 10:19 PM
        To: BPQ32@yahoogroups.com
        Subject: Re: [BPQ32] HF Forwarding time out

         

         

        Jerry - N9LYA wrote:

         

        Hi Guys.. I am setting HF forwarding on 40 meters to KQ0I and we get going very well.. But shortly I send a disconnect. It says it’s Timeout!!!

         

        It does not seem like much time had passed since forwarding started… Band is somewhat bad But even when good I send this disconnect.. Any ideas…

         

        Maybe something is set to a short time delay because I never forwarded on HF with this setup of BPQ32/FBB

         

        If anyone has a guess??

         

        73 jerry

         

         

         

        73 Jerry Kutche N9LYA

        ARRL Net Manager Indiana Section – Packet Net

        HF Skipnet Coordinator

        IP Coordinator Indiana

        Packet Coordinator Indiana

        http://www.n9lya.com

        http://www.w9otr.org

        http://www.indianapacketcouncil.org

        http://www.mitchellwx.com

         


        Hi Jerry,

                     Check in your FBB Config for the  "Users / Forward" timeout, for forward on HF, you could set this upwards of 20 ( 20 minutes ).

        Here I use, Timeout = 20 20

        Regards ...... Peter

      • D Calder
        My 20 Meter port settings if that helps. DRSI though. PORT PORTNUM=2 ; Optional but sets port number if stated ID=14.098 MHz
        Message 3 of 11 , Aug 28, 2009

          My 20 Meter port settings if that helps. DRSI though.

           

          PORT

           PORTNUM=2                    ; Optional but sets port number if stated

           ID=14.098 MHz                 ; Displayed by PORTS command

           TYPE=DRSI

           PROTOCOL=HDLC

           IOADDR=310H

           INTLEVEL=3

           FULLDUP=0                       ; Only meaningful for KISS devices

           SPEED=300                        

           CHANNEL=B                      ; A for single channel TNC, A or B for multichannel

           PERSIST=64                        ; PERSIST=256/(# of transmitters-1)

           SLOTTIME=100                 ; CMSA interval timer in milliseconds

           TXDELAY=450                    ; Transmit keyup delay in milliseconds

           TXTAIL=30                          ; TX key down, in milliseconds, at packet end

           QUALITY=192                    ; Quality factor applied to node broadcasts heard on

           MINQUAL=168                 ; Entries in the nodes table with qualities greater or

           MAXFRAME=1                 ; Max outstanding frames (1 thru 7)

           FRACK=7000                      ; Level 2 timout in milliseconds

           RESPTIME=1500               ; Level 2 delayed ack timer in milliseconds

           RETRIES=10                        ; Level 2 maximum retry value

           PACLEN=80                        ; Default max packet length for this port

           UNPROTO=BPQ32          ; BTEXT broadcast addrs format: DEST[,digi1[,digi2]]

           BCALL=N4ZKF                   ; BTEXT call. unstated defaults to APPL1CALL

           L3ONLY=0                           ; 1=No user downlink connects on this port

           DIGIFLAG=1                      ; Digipeat: 0=OFF, 1=ALL, 255=UI Only

           DIGIPORT=0                      ; Port on which to send digi'd frames (0 = same port)

           USERS=0                             ; Maximum number of L2 sessions, 0 = no limit

          ENDPORT

           

           

          n4zkf

          n4zkf@...

          www.n4zkf.com

           

           

           

           

          From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Jerry - N9LYA
          Sent: Thursday, August 27, 2009 6:48 PM
          To: BPQ32@yahoogroups.com
          Subject: [BPQ32] HF Forwarding time out

           

           

          Hi Guys.. I am setting HF forwarding on 40 meters to KQ0I and we get going very well.. But shortly I send a disconnect. It says it’s Timeout!!!

           

          It does not seem like much time had passed since forwarding started… Band is somewhat bad But even when good I send this disconnect.. Any ideas…

           

          Maybe something is set to a short time delay because I never forwarded on HF with this setup of BPQ32/FBB

           

          If anyone has a guess??

           

          73 jerry

           

           

           

          73 Jerry Kutche N9LYA

          ARRL Net Manager Indiana Section – Packet Net

          HF Skipnet Coordinator

          IP Coordinator Indiana

          Packet Coordinator Indiana

          http://www.n9lya.com

          http://www.w9otr.org

          http://www.indianapacketcouncil.org

          http://www.mitchellwx.com

           

        • n9lya
          It just disconnects and says Timeout! in the monitor window. ????????? Making it impossible to forward anything... 73 jerry
          Message 4 of 11 , Aug 28, 2009
            It just disconnects and says Timeout!
            in the monitor window.

            ?????????

            Making it impossible to forward anything...

            73 jerry


            --- In BPQ32@yahoogroups.com, "D Calder" <n4zkf@...> wrote:
            >
            > Yes, it won't have any effect. If it doesn't see him in a couple minutes,
            > it's done for me on my 20 Meter
            >
            > port. Is there any errors? Or he just goes away?
            >
            >
            >
            >
            >
            >
            >
            > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
            > Jerry - N9LYA
            > Sent: Friday, August 28, 2009 5:04 AM
            > To: BPQ32@yahoogroups.com
            > Subject: RE: [BPQ32] HF Forwarding time out
            >
            >
            >
            >
            >
            > Hi Peter.. Thanks for the idea.. I did try it was set at 10 minutes.. But
            > the timeout occurs in less then two minutes of a forwarding session???
            >
            >
            >
            > Changing this setting did not delay the time out any longer.
            >
            >
            >
            > Many thanks Jerry
            >
            >
            >
            > _____
            >
            > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
            > Peter Mallett
            > Sent: Thursday, August 27, 2009 10:19 PM
            > To: BPQ32@yahoogroups.com
            > Subject: Re: [BPQ32] HF Forwarding time out
            >
            >
            >
            >
            >
            > Jerry - N9LYA wrote:
            >
            >
            >
            > Hi Guys.. I am setting HF forwarding on 40 meters to KQ0I and we get going
            > very well.. But shortly I send a disconnect. It says it's Timeout!!!
            >
            >
            >
            > It does not seem like much time had passed since forwarding started. Band is
            > somewhat bad But even when good I send this disconnect.. Any ideas.
            >
            >
            >
            > Maybe something is set to a short time delay because I never forwarded on HF
            > with this setup of BPQ32/FBB
            >
            >
            >
            > If anyone has a guess??
            >
            >
            >
            > 73 jerry
            >
            >
            >
            >
            >
            >
            >
            > 73 Jerry Kutche N9LYA
            >
            > ARRL Net Manager Indiana Section - Packet Net
            >
            > HF Skipnet Coordinator
            >
            > IP Coordinator Indiana
            >
            > Packet Coordinator Indiana
            >
            > http://www.n9lya.com <http://www.n9lya.com/>
            >
            > http://www.w9otr.org <http://www.w9otr.org/>
            >
            > http://www.indianapacketcouncil.org <http://www.indianapacketcouncil.org/>
            >
            > <http://www.mitchellwx.com/> http://www.mitchellwx.com
            >
            >
            >
            >
            > Hi Jerry,
            >
            > Check in your FBB Config for the "Users / Forward" timeout,
            > for forward on HF, you could set this upwards of 20 ( 20 minutes ).
            >
            > Here I use, Timeout = 20 20
            >
            > Regards ...... Peter
            >
          • WS7I
            Sounds like to me your HF BPQCFG settings are not right. MaxFrame should be 1 or maybe 2, that is the wait I was speaking too. The TNC settings. ... -- Jay
            Message 5 of 11 , Aug 28, 2009
              Sounds like to me your HF BPQCFG settings are not right. MaxFrame
              should be 1 or maybe 2, that is the
              wait I was speaking too. The TNC settings.

              On Fri, Aug 28, 2009 at 2:03 AM, Jerry - N9LYA<n9lya@...> wrote:
              >
              >
              > Hi Peter.. Thanks for the idea.. I did try it was set at 10 minutes.. But
              > the timeout occurs in less then two minutes of a forwarding session???
              >
              >
              >
              > Changing this setting did not delay the time out any longer…
              >
              >
              >
              > Many thanks Jerry
              >
              >
              >
              > ________________________________
              >
              > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
              > Peter Mallett
              > Sent: Thursday, August 27, 2009 10:19 PM
              >
              > To: BPQ32@yahoogroups.com
              > Subject: Re: [BPQ32] HF Forwarding time out
              >
              >
              >
              >
              >
              > Jerry - N9LYA wrote:
              >
              >
              >
              > Hi Guys.. I am setting HF forwarding on 40 meters to KQ0I and we get going
              > very well.. But shortly I send a disconnect. It says it’s Timeout!!!
              >
              >
              >
              > It does not seem like much time had passed since forwarding started… Band is
              > somewhat bad But even when good I send this disconnect.. Any ideas…
              >
              >
              >
              > Maybe something is set to a short time delay because I never forwarded on HF
              > with this setup of BPQ32/FBB
              >
              >
              >
              > If anyone has a guess??
              >
              >
              >
              > 73 jerry
              >
              >
              >
              >
              >
              >
              >
              > 73 Jerry Kutche N9LYA
              >
              > ARRL Net Manager Indiana Section – Packet Net
              >
              > HF Skipnet Coordinator
              >
              > IP Coordinator Indiana
              >
              > Packet Coordinator Indiana
              >
              > http://www.n9lya.com
              >
              > http://www.w9otr.org
              >
              > http://www.indianapacketcouncil.org
              >
              > http://www.mitchellwx.com
              >
              >
              >
              > Hi Jerry,
              >
              >              Check in your FBB Config for the  "Users / Forward" timeout,
              > for forward on HF, you could set this upwards of 20 ( 20 minutes ).
              >
              > Here I use, Timeout = 20 20
              >
              > Regards ...... Peter
              >
              >



              --
              Jay WS7I
            Your message has been successfully submitted and would be delivered to recipients shortly.