Loading ...
Sorry, an error occurred while loading the content.

kamxl

Expand Messages
  • ws7i
    Can someone clip the port section out of there bpqcfg file and send it to me. I am helping a guy with his KAMXL. Thanks Jay
    Message 1 of 7 , Mar 13, 2009
    • 0 Attachment
      Can someone clip the port section out of there bpqcfg file and send it to me. I am helping a guy with his KAMXL.

      Thanks

      Jay
    • Mike Melnik
      Reply sent direct Mike Melnik N9PMO Web Site: www.n9pmo.com ... From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
      Message 2 of 7 , Mar 13, 2009
      • 0 Attachment

        Reply sent direct

         

        Mike Melnik N9PMO

        Web Site: www.n9pmo.com

         

        -----Original Message-----
        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of ws7i
        Sent: Friday, March 13, 2009 13:35
        To: BPQ32@yahoogroups.com
        Subject: [BPQ32] kamxl

         

        Can someone clip the port section out of there bpqcfg file and send it to me. I am helping a guy with his KAMXL.

        Thanks

        Jay

      • Jerry - N9LYA
        I use a KAMXL with MSYS also in KISS mode. It took some finagling to get it to work the correct port. May have similar issue with BPQ32. I might be able to
        Message 3 of 7 , Mar 13, 2009
        • 0 Attachment

          I use a KAMXL with MSYS also in KISS mode… It took some finagling to get it to work the correct port… May have similar issue with BPQ32… I might be able to help.. But some of the items were set in the TNC and some in MSYS.. and I off hand do not remember.. I just know I had to reverse something…

           

           

          73 Jerry N9LYA

           

          From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of ws7i
          Sent: Friday, March 13, 2009 2:35 PM
          To: BPQ32@yahoogroups.com
          Subject: [BPQ32] kamxl

           

          Can someone clip the port section out of there bpqcfg file and send it to me. I am helping a guy with his KAMXL.

          Thanks

          Jay

        • Bill Vodall WA7NWP
          Please share any Kam-xl tidbits here on the list. I scored one last weekend at the big Western -WA swapfest of the year in Puyallup and I m looking forward to
          Message 4 of 7 , Mar 13, 2009
          • 0 Attachment
            Please share any Kam-xl tidbits here on the list. I scored one last
            weekend at the big Western -WA swapfest of the year in Puyallup and
            I'm looking forward to getting it on the air.

            Bill - WA7NWP

            > I use a KAMXL with MSYS also in KISS mode… It took some finagling to get it
            > to work the correct port… May have similar issue with BPQ32…
          • Mike Melnik
            Information below applies to BPQ32 Only Setup for Kantronics 9612 and KAM, 9612 Plus & KAMXL allow for a higher COMM Port BAUD Rate, it has been found in the
            Message 5 of 7 , Mar 13, 2009
            • 0 Attachment

              Information below applies to BPQ32 Only

               

              Setup for Kantronics 9612 and KAM, 9612 Plus & KAMXL allow for a higher COMM Port BAUD Rate, it has been found in the past 9612, 9612 PLUS and KAMXL must

              Use a COMM BUAD Rate of 19200 or above, if less there is a good chance all three will not communicate on both Radio Ports, one cure is to run the TNC in Full Duplex, must be edited in ports sections and TNC Placed in Full Duplex before entering Kiss Mode, I strongly recommend CD Software for the use of open squelch, on VHF/UHF Port please us the Following Commands:

              CD SOFT

              AB 19200

              IN KISS

              RESET

               

              Set COMM Port in device manager to same serial BAUD RATE as TNC

               

              I keep AGWPE on my computer to remove one or more of my 3 TNC’S out of KISS

              You should only use Hyper Term to enter Commands and KISS MODE, Free Version of AGWPE Commands are incorrect for most Kantronics TNC’S

               

              ; With the following definition BPQ32 accesses the TNC directly.

               

              PORT

               PORTNUM=1           ; Optional but sets port number if stated

               ID=BPQ 145.030 MHz  ; Displayed by PORTS command

               TYPE=ASYNC          ; Port is RS232 Com

               PROTOCOL=KISS             ; TNC is used in KISS mode

               FULLDUP=0           ; Only meaningful for KISS devices

               IOADDR=1            ; 1 = SERIAL PORT COM1 ETC.

               SPEED=19200         ; RS232 COM PORT SPEED

               CHANNEL=A           ; Address if multichannel TNC

               PERSIST=64          ; PERSIST=256/(# of transmitters-1)

               SLOTTIME=100        ; CMSA interval timer in milliseconds

               TXDELAY=280         ; Transmit keyup delay in milliseconds

               TXTAIL=0            ; TX key down, in milliseconds, at packet end

               QUALITY=0           ; Quality factor applied to node broadcasts heard on

                                   ; this port, unless overridden by a locked route

                                   ; entry. Setting to 0 stops node broadcasts

               MINQUAL=191         ; Entries in the nodes table with qualities greater or

                                   ; equal to MINQUAL will be sent on this port. A value

                                   ; of 0 sends everything.

               MAXFRAME=3          ; Max outstanding frames (1 thru 7)

               FRACK=5000          ; Level 2 timout in milliseconds

               RESPTIME=2000             ; Level 2 delayed ack timer in milliseconds

               RETRIES=10          ; Level 2 maximum retry value

               PACLEN=250          ; Default max packet length for this port

               UNPROTO=Node         ; BTEXT broadcast addrs format: DEST[,digi1[,digi2]]

               BCALL=N9PMO-2              ; BTEXT call. unstated defaults to BBSCALL/APPL1CALL

               L3ONLY=0            ; 1=No user downlink connects on this port

               DIGIFLAG=1          ; Digipeat: 0=OFF, 1=ALL, 255=UI Only

               DIGIPORT=0          ; Port on which to send digi'd frames (0 = same port)

               USERS=0                    ; Maximum number of L2 sessions, 0 = no limit

              ENDPORT

               

              PORT

               PORTNUM=2           ; Optional but sets port number if stated

               ID=BPQ 446.100 MHz  ; Displayed by PORTS command

               TYPE=ASYNC          ; Port is RS232 Com

               PROTOCOL=KISS             ; TNC is used in KISS mode

               FULLDUP=0           ; Only meaningful for KISS devices

               IOADDR=1            ; 1 = SERIAL PORT COM1 ETC.

               SPEED=19200         ; RS232 COM PORT SPEED

               CHANNEL=B           ; Address if multichannel TNC

               PERSIST=64          ; PERSIST=256/(# of transmitters-1)

               SLOTTIME=100        ; CMSA interval timer in milliseconds

               TXDELAY=180         ; Transmit keyup delay in milliseconds

               TXTAIL=0            ; TX key down, in milliseconds, at packet end

               QUALITY=192         ; Quality factor applied to node broadcasts heard on

                                   ; this port, unless overridden by a locked route

                                   ; entry. Setting to 0 stops node broadcasts

               MINQUAL=191         ; Entries in the nodes table with qualities greater or

                                   ; equal to MINQUAL will be sent on this port. A value;

                                   ; of 0 sends everything.

               MAXFRAME=3          ; Max outstanding frames (1 thru 7)

               FRACK=2000          ; Level 2 timout in milliseconds

               RESPTIME=1000             ; Level 2 delayed ack timer in milliseconds

               RETRIES=5           ; Level 2 maximum retry value

               PACLEN=250          ; Default max packet length for this port

               UNPROTO=Node        ; BTEXT broadcast addrs format: DEST[,digi1[,digi2]]

               BCALL=N9PMO-2              ; BTEXT call. unstated defaults to BBSCALL/APPL1CALL

               L3ONLY=1            ; 1=No user downlink connects on this port

               DIGIFLAG=1          ; Digipeat: 0=OFF, 1=ALL, 255=UI Only

               DIGIPORT=0          ; Port on which to send digi'd frames (0 = same port)

               USERS=0             ; Maximum number of L2 sessions, 0 = no limit

              ENDPORT

               

              Mike Melnik N9PMO

              Web Site: www.n9pmo.com

               

              -----Original Message-----
              From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Bill Vodall WA7NWP
              Sent:
              Friday, March 13, 2009 17:00
              To: BPQ32@yahoogroups.com
              Subject: Re: [BPQ32] kamxl

               

              Please share any Kam-xl tidbits here on the list.  I scored one last

              weekend at the big Western -WA swapfest of the year in Puyallup and

              I'm looking forward to getting it on the air.

               

              Bill - WA7NWP

               

              > I use a KAMXL with MSYS also in KISS mode… It took some finagling to get it

              > to work the correct port… May have similar issue with BPQ32…

               

               

              ------------------------------------

               

              Yahoo! Groups Links

               

              <*> To visit your group on the web, go to:

                  http://groups.yahoo.com/group/BPQ32/

               

              <*> Your email settings:

                  Individual Email | Traditional

               

              <*> To change settings online go to:

                  http://groups.yahoo.com/group/BPQ32/join

                  (Yahoo! ID required)

               

              <*> To change settings via email:

                  mailto:BPQ32-digest@yahoogroups.com

                  mailto:BPQ32-fullfeatured@yahoogroups.com

               

              <*> To unsubscribe from this group, send an email to:

                  BPQ32-unsubscribe@yahoogroups.com

               

              <*> Your use of Yahoo! Groups is subject to:

                  http://docs.yahoo.com/info/terms/

               

            • Jerry - N9LYA
              Bill... I will do some research and experimentation... I do know the difference in the KAMXL does NOT Apply to the KAM KAM PLUS KAM98 or KPC9612... I just
              Message 6 of 7 , Mar 13, 2009
              • 0 Attachment
                Bill... I will do some research and experimentation...
                I do know the difference in the KAMXL does NOT Apply to the KAM KAM PLUS
                KAM98 or KPC9612...

                I just have simply forgotten what I did to get it to work.. I will work on a
                print out of the KAMXL's Display function and post it along with my MSYS
                Settings...

                In case they apply to BPQ32... I am sure it would as best I remember the
                parameter I had to play with was one set in THE TNC...

                73 jerry

                -----Original Message-----
                From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Bill
                Vodall WA7NWP
                Sent: Friday, March 13, 2009 6:00 PM
                To: BPQ32@yahoogroups.com
                Subject: Re: [BPQ32] kamxl

                Please share any Kam-xl tidbits here on the list. I scored one last
                weekend at the big Western -WA swapfest of the year in Puyallup and
                I'm looking forward to getting it on the air.

                Bill - WA7NWP

                > I use a KAMXL with MSYS also in KISS mode. It took some finagling to get
                it
                > to work the correct port. May have similar issue with BPQ32.


                ------------------------------------

                Yahoo! Groups Links
              • ke7xo
                this probably isn t what you re after, as I use bpq w/agw... but for what it s worth, here is the ports portion for my XL... Richard PORT PORTNUM=2 ID= 144.39
                Message 7 of 7 , Mar 13, 2009
                • 0 Attachment
                  this probably isn't what you're after, as I use bpq w/agw...

                  but for what it's worth, here is the ports portion for my XL...


                  Richard


                  PORT
                  PORTNUM=2
                  ID= 144.39
                  TYPE=EXTERNAL
                  DLLNAME=BPQtoAGW.DLL
                  IOADDR=2EEA
                  CHANNEL=B
                  QUALITY=0
                  MINQUAL=0
                  MAXFRAME=4
                  FRACK=5000
                  RESPTIME=1000
                  RETRIES=10
                  PACLEN=236
                  UNPROTO=BPQ32
                  L3ONLY=1
                  DIGIFLAG=0
                  DIGIPORT=0
                  USERS=0
                  ENDPORT

                  PORT
                  PORTNUM=3
                  ID= 10.149.3
                  TYPE=EXTERNAL
                  DLLNAME=BPQtoAGW.DLL
                  IOADDR=2EEA
                  CHANNEL=C
                  QUALITY=0
                  MINQUAL=0
                  MAXFRAME=2
                  FRACK=5000
                  RESPTIME=1000
                  RETRIES=10
                  PACLEN=126
                  UNPROTO=BPQ32,GATE,WIDE2-1
                  L3ONLY=1
                  DIGIFLAG=0
                  DIGIPORT=0
                  USERS=0
                  ENDPORT




                  ws7i wrote:
                  >
                  > Can someone clip the port section out of there bpqcfg file and send it
                  > to me. I am helping a guy with his KAMXL.
                  >
                  > Thanks
                  >
                  > Jay
                  >
                  >
                Your message has been successfully submitted and would be delivered to recipients shortly.